2012

Coull, JD and Hodson, HP (2012) Predicting the Profile Loss of High-Lift Low Pressure Turbines. J TURBOMACH, 134. -. ISSN 0889-504X

Eastwood, D and Coren, DD and Long, CA and Atkins, NR and Childs, PRN and Scanlon, TJ and Guijarro-Valencia, A (2012) Experimental investigation of turbine stator well rim seal, Re-ingestion and interstage seal flows using gas concentration techniques and displacement measurements. Journal of Engineering for Gas Turbines and Power, 134. ISSN 0742-4795

Fidalgo, VJ and Hall, CA and Colin, Y (2012) A Study of Fan-Distortion Interaction Within the NASA Rotor 67 Transonic Stage. Journal of Turbomachinery, 134. ISSN 0889-504X

Goodhand, MN and Miller, RJ (2012) The Impact of Real Geometries on Three-Dimensional Separations in Compressors. J TURBOMACH, 134. -. ISSN 0889-504X

Klus, P and Lam, S and Lyberg, D and Cheung, MS and Pullan, G and McFarlane, I and Yeo, GSH and Lam, BY (2012) BarraCUDA - a fast short read sequence aligner using graphics processing units. BMC Res Notes, 5. 27-.

Lim, CH and Pullan, G and Northall, J (2012) Estimating the Loss Associated With Film Cooling for a Turbine Stage. J TURBOMACH, 134. -. ISSN 0889-504X

Markesteijn, AP and Hartkamp, R and Luding, S and Westerweel, J (2012) A comparison of the value of viscosity for several water models using Poiseuille flow in a nano-channel. J Chem Phys, 136. 134104-.

Tucker, P and Eastwood, S and Klostermeier, C and Jefferson-Loveday, R and Tyacke, J and Liu, Y (2012) Hybrid LES Approach for Practical Turbomachinery Flows-Part I: Hierarchy and Example Simulations. J TURBOMACH, 134. -. ISSN 0889-504X

Wakelam, CT and Hynes, TP and Hodson, HP and Evans, SW and Chanez, P (2012) Separation Control for Aeroengine Intakes, Part 1: Low-Speed Investigation of Control Strategies. JOURNAL OF PROPULSION AND POWER, 28. pp. 758-765. ISSN 0748-4658

Wakelam, CT and Hynes, TP and Hodson, HP and Evans, SW and Chanez, P (2012) Separation Control for Aeroengine Intakes, Part 2: High-Speed Investigations. JOURNAL OF PROPULSION AND POWER, 28. pp. 766-772. ISSN 0748-4658

Young, A and Day, I and Pullan, G (2012) Stall Warning by Blade Pressure Signature Analysis. Journal of Turbomachinery, 135. ISSN 0889-504X

Zamboni, G and Xu, L (2012) Fan Root Aerodynamics For Large Bypass Gas Turbine Engines: Influence on the Engine Performance and 3D Design. ASME Journal of Turbomachinery, 134. -.

2011

Atkins, NR and Ainsworth, RW (2011) Turbine Aerodynamic Performance Measurement Under Non-Adiabatic Conditions. ASME Conference Proceedings, 2007. 493-501-493-501.

Atkins, NR and Miller, RJ and Ainsworth, RW (2011) The development of aerodynamic performance measurements in a transient test facility. Proceedings of the ASME Turbo Expo 2004, 5 B. pp. 1325-1338.

Berloff, P and Karabasov, S and Farrar, T and Kamenkovich, I (2011) On Latency of Multiple Zonal Jets in the Oceans. Journal of Fluid Mechanics, 686. pp. 534-567.

Brandvik, T and Pullan, G (2011) An Accelerated 3D Navier-Stokes Solver for Flows in Turbomachines. J TURBOMACH, 133. -. ISSN 0889-504X

Coren, DD and Atkins, NR and Long, CA and Eastwood, D and Childs, PRN and Guijarro-Valencia, A and Dixon, JA (2011) The influence of turbine stator well coolant flow rate and passage configuration on cooling effectiveness. Proceedings of the ASME Turbo Expo, 5. pp. 981-992.

Coull, JD and Hodson, HP (2011) Unsteady boundary-layer transition in low-pressure turbines. J FLUID MECH, 681. pp. 370-410. ISSN 0022-1120

Dawes, WN and Dhanasekaran, PC and Kellar, WP (2011) Acceleration of an unstructured hybrid mesh RANS solver by porting to GPU architectures. In: UNSPECIFIED.

Dawes, WN and Kellar, W and Harvey, S and Eccles, N (2011) Automated meshing for aero-thermal analysis of complex automotive geometries. In: UNSPECIFIED.

Eastwood, D and Coren, D and Long, CA and Atkins, NR and Childs, PRN and Scanlon, TJ and Guijarro-Valencia, A (2011) Experimental investigation of turbine stator well rim seal, reingestion and interstage seal flows using gas concentration techniques and displacement measurements. Proceedings of the ASME Turbo Expo, 5. pp. 859-870.

Eastwood, SJ and Tucker, PG (2011) Hybrid LES - RANS of complex geometry jets. International Journal of Aeroacoustics, 10. pp. 659-684. ISSN 1475-472X

Garcia-Sagrado, A and Hynes, T (2011) Wall-Pressure Sources Near an Airfoil Trailing Edge under Separated Laminar Boundary Layers. AIAA Journal, 49. pp. 1841-1856.

Garcia-Sagrado, A and Hynes, TP (2011) Stochastic estimation of flow near the trailing edge of a NACA0012 airfoil. Experiments in Fluids: experimental methods and their applications to fluid flow, 51. pp. 1057-1071.

Giacche, D and Xu, LP and Coupland, J and Wilson, AG (2011) Comparison Between Postprocessing Methods Applied to Rotor-Stator-Interaction Tone-Noise Problems. AIAA J, 49. pp. 1214-1229. ISSN 0001-1452

Goodhand, MN and Miller, RJ (2011) Compressor Leading Edge Spikes: A New Performance Criterion. J TURBOMACH, 133. -. ISSN 0889-504X

Houghton, T and Day, I (2011) Enhancing the stability of subsonic compressors using casing grooves. Journal of Turbomachinery, 133. ISSN 0889-504X

Houghton, T and Day, I (2011) Stability enhancement by casing grooves: The importance of stall inception mechanism and solidity. Journal of Turbomachinery, 134. ISSN 0889-504X

Jefferson Loveday, RJ and Tucker, PG (2011) Wall resolved LES and zonal LES of round jet impingement heat transfer on a flat plate. Numerical Heat Transfer, Part B: Fundamentals, 59. pp. 190-208. ISSN 1040-7790

Lim, CH and Pullan, G and Ireland, P (2011) Influence of film cooling hole angles and geometries on aerodynamic loss and net heat flux reduction. Proceedings of the ASME Turbo Expo, 5. pp. 353-367.

Massini, M and Miller, RJ and Hodson, HP (2011) A New Intermittent Aspirated Probe for the Measurement of Stagnation Quantities in High Temperature Gases. J TURBOMACH, 133. -. ISSN 0889-504X

Montomoli, F and Hodson, HP and Lapworth, L (2011) RANS-URANS in axial compressor, a design methodology. P I MECH ENG A-J POW, 225. pp. 363-374. ISSN 0957-6509

Montomoli, F and Hodson, HP and Lapworth, L (2011) RANS-URANS in axial compressor, a design methodology. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225. pp. 363-374. ISSN 0957-6509

Pullan, G and Brandvik, T (2011) Large-Scale Gas Turbine Simulations on GPU Clusters. In: GPU Computing Gems: Jade Edition. Morgann-Kaufman. ISBN 0123859638,978-0123859631

Randle, WE and Hall, CA and Vera-Morales, M (2011) Improved Range Equation Based on Aircraft Flight Data. J AIRCRAFT, 48. pp. 1291-1298. ISSN 0021-8669

Saeed, TI and Graham, WR and Hall, CA (2011) Boundary-layer suction system design for laminar-flying-wing aircraft. Journal of Aircraft, 48. pp. 1368-1379. ISSN 0021-8669

Saeed, TI and Graham, WR and Halls, CA (2011) Boundary-Layer Suction System Design for Laminar-Flying-Wing Aircraft. In: UNSPECIFIED pp. 1368-1379..

Torre, D and Vazquez, R and Blanco, ED and Hodson, HP (2011) A New Alternative for Reduction in Secondary Flows in Low Pressure Turbines. J TURBOMACH, 133. -. ISSN 0889-504X

Tucker, PG (2011) Computation of unsteady turbomachinery flows: Part 1-Progress and challenges. PROG AEROSP SCI, 47. pp. 522-545. ISSN 0376-0421

Tucker, PG (2011) Computation of unsteady turbomachinery flows: Part 2-LES and hybrids. Progress in Aerospace Sciences. ISSN 0376-0421

Tucker, PG (2011) Hybrid Hamilton-Jacobi-Poisson wall distance function model. Computers and Fluids, 44. pp. 130-142. ISSN 0045-7930

Tucker, PG (2011) LES modelling of turbomachinery flows. In: Royal Society International Kavli Seminar, 11-1-2011 to --, Unspecified.

Tucker, PG and Eastwood, S and Klostermeier, C and Xia, H and Ray, P and Tyacke, JC and Dawes, WN (2011) Hybrid LES approach for practical turbomachinery flows: Part 2 - further applications. Transactions of the ASME Journal of Turbomachinery. ISSN 0889-504X

Tyacke, J and Jefferson Loveday, R and Tucker, PG (2011) Application of LES to labyrinth seals. In: 20th AIAA Computational Fluid Dynamics Conference, 27-6-2011 to 30-6-2011, Honolulu, Hawaii, USA.

Wheeler, APS and Atkins, NR and He, L (2011) Turbine Blade Tip Heat Transfer in Low Speed and High Speed Flows. J TURBOMACH, 133. -. ISSN 0889-504X

Xia, H and Karabasov, SA and Graham, O and Tucker, PG and Dowling, AP and Depuru, K and Hynes, TP (2011) Hybrid RANS-LES modeling of chevron nozzles with prediction of far field sound. In: 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 4-1-2011 to 7-1-2011, Orlando, Florida, USA.

Xia, H and Tucker, PG (2011) Fast equal and biased distance fields for medial axis transform with meshing in mind. APPL MATH MODEL, 35. pp. 5804-5819. ISSN 0307-904X

Xia, H and Tucker, PG and Coughlin, G (2011) Novel applications of BEM based Poisson level set approach. Engineering Analysis with Boundary Elements. ISSN 0955-7997

Young, A and Day, I and Pullan, G (2011) Stall warning by blade pressure signature analysis. Proceedings of the ASME Turbo Expo, 7. pp. 1589-1599.

Zachariadis, A and Hall, CA (2011) Application of a Navier-Stokes Solver to the Study of Open Rotor Aerodynamics. J TURBOMACH, 133. -. ISSN 0889-504X

Zachariadis, A and Hall, CA and Parry, AB (2011) Contra-rotating open rotor operation for improved aerodynamics and noise at takeoff. Proceedings of the ASME Turbo Expo, 7. pp. 973-983.

2010

Brandvik, T and Pullan, G (2010) SBLOCK: A framework for efficient stencil-based PDE solvers on multi-core platforms. Proceedings - 10th IEEE International Conference on Computer and Information Technology, CIT-2010, 7th IEEE International Conference on Embedded Software and Systems, ICESS-2010, ScalCom-2010. pp. 1181-1188.

Brandvik, T and Pullan, G (2010) SBLOCK: a framework for efficient stencil-based PDE solvers on multi-core platforms. In: 1st International Workshop on the Frontier of GPU Computing, 29-6-2010 to 1-7-2010, Bradford, Yorkshire, England.

Coren, DD and Atkins, NR and Turner, JR and Eastwood, DE and Davies, S and Childs, PRN and Dixon, J and Scanlon, TS (2010) An advanced multi-configuration stator well cooling test facility. Proceedings of the ASME Turbo Expo, 4. pp. 1259-1270.

Coull, JD and Hodson, HP (2010) PREDICTING THE PROFILE LOSS OF HIGH-LIFT LOW PRESSURE TURBINES. In: UNSPECIFIED pp. 1283-1297..

Coull, JD and Thomas, RL and Hodson, HP (2010) Velocity Distributions for Low Pressure Turbines. J TURBOMACH, 132. -. ISSN 0889-504X

Dawes, WN and Kellar, WP and Harvey, SA (2010) Generation of conjugate meshes for complex geometries for coupled multi-physics simulations. In: UNSPECIFIED.

Dawes, WN and Kellar, WP and Harvey, SA (2010) TOWARDS COOLED TURBINE PRELIMINARY LIFE PREDICTION via CONCURRENT AERODYNAMIC, THERMAL & MATERIAL STRESS SIMULATIONS on CONJUGATE MESHES. In: UNSPECIFIED pp. 711-722..

Dixon, JA and Guijarro, A and Bauknecht, A and Coren, D and Atkins, N (2010) Heat Transfer in Turbine Hub Cavities Adjacent to the Main Gas Path. ASME Conference Proceedings, 2010. 943-954-943-954.

Dixon, SL and Hall, C (2010) Fluid Mechanics and Thermodynamics of Turbomachinery. A Butterworth-Heinemann Title, -. ISBN 1856177939,9781856177931

Eastwood, S and Tucker, PG and Xia, H and Carpenter, PW and Dunkley, P (2010) Hybrid LES computations and measurements of a small scale high speed coflowing jet. AIAA Journal, 48. pp. 964-974. ISSN 0001-1452

Fidalgo, VJ and Hall, CA and Colin, Y (2010) A STUDY OF FAN-DISTORTION INTERACTION WITHIN THE NASA ROTOR 67 TRANSONIC STAGE. In: UNSPECIFIED pp. 369-380..

Giacche, D and Ishikawa, T and Yamaguchi, T (2010) Hydrodynamic entrapment of bacteria swimming near a solid surface. PHYS REV E, 82. -. ISSN 1539-3755

Giacché, D and Ishikawa, T (2010) Hydrodynamic interaction of two unsteady model microorganisms. J Theor Biol, 267. pp. 252-263.

Giacché, D and Ishikawa, T and Yamaguchi, T (2010) Hydrodynamic entrapment of bacteria swimming near a solid surface. Phys Rev E Stat Nonlin Soft Matter Phys, 82. 056309-.

Goodhand, MN and Miller, RJ (2010) THE IMPACT OF REAL GEOMETRIES ON THREE-DIMENSIONAL SEPARATIONS IN COMPRESSORS. In: UNSPECIFIED pp. 129-138..

Heffer, JJH and Miller, RJ (2010) A transonic vane for use downstream of a pressure gain combustor. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition.

Houghton, T and Day, I (2010) Stability enhancement by casing grooves: The importance of stall inception mechanism and solidity. Proceedings of the ASME Turbo Expo, 7. pp. 2383-2391.

Jefferson Loveday, RJ and Tucker, PG (2010) LES of impingement heat transfer on a concave surface. Numerical Heat Transfer Part A: Applications, 58. pp. 247-271. ISSN 1040-7782

Jellema, LJ and Markesteijn, AP and Westerweel, J and Verpoorte, E (2010) Tunable hydrodynamic chromatography of microparticles localized in short microchannels. Anal Chem, 82. pp. 4027-4035.

Karabasov, SA (2010) Once again on the importance of propagation effects for jet noise modelling. 16th AIAA/CEAS Aeroacoustics Conference (31st AIAA Aeroacoustics Conference).

Karabasov, SA (2010) Understanding jet noise. Philos Transact A Math Phys Eng Sci, 368. pp. 3593-3608. ISSN 1364-503X

Karabasov, SA and Afsar, MZ and Hynes, TP and Dowling, AP and McMullan, WA and Pokora, CD and Page, GJ and McGuirk, JJ (2010) Jet Noise: Acoustic Analogy Informed by Large Eddy Simulation. AIAA JOURNAL, 48. pp. 1312-1325. ISSN 0001-1452

Karabasov, SA and Xia, H and Graham, O and Hynes, TP and Tucker, PG and Dowling, AP (2010) Low-order modelling for chevron jet noise based on LES data. In: 16th AIAA/CEAS Aeroacoustics Conference, 7-6-2010 to 9-6-2010, Stockholm, Sweden.

Karabasov, SA and Xia, H and Graham, WR and Hynes, TP and Tucker, PG and Dowling, AP (2010) Low-order modelling for chevron jet noise based on LES data. In: 16th AIAA/CEAS Aeroacoustics Conference, 7-6-2010 to 9-6-2010, Stockholm, Sweden.

Karakasis, MK and Naylor, EMJ and Miller, RJ and Hodson, HP (2010) THE EFFECT OF AN UPSTREAM COMPRESSOR ON A NON-AXISYMMETRIC S-DUCT. In: UNSPECIFIED pp. 477-486..

Krishnababu, SK and Hodson, HP and Booth, GD and Lock, GD and Dawes, WN (2010) Aerothermal Investigation of Tip Leakage Flow in a Film Cooled Industrial Turbine Rotor. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 132. -. ISSN 0889-504X

Lim, CH and Pullan, G and Northall, J (2010) ESTIMATING THE LOSS ASSOCIATED WITH FILM COOLING FOR A TURBINE STAGE. In: UNSPECIFIED pp. 1401-1413..

Lim, CH and Pullan, G and Northall, J (2010) Estimating the loss associated with film-cooling for a turbine stage. In: ASME IGTI Turbo Expo, 14-6-2010 to 18-6-2010, Glasgow, Scotland.

Liu, CB and Nithiarasu, P and Tucker, PG (2010) Wall distance calculation using the Eikonal/Hamilton-Jacobi equations on unstructured meshes: A finite element approach. Engineering Computations, 27. pp. 645-657. ISSN 0264-4401

Loiodice, S and Tucker, PG and Watson, J (2010) Modelling of coupled open rotor engine intakes. In: 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 4-1-2010 to 7-1-2010, Orlando, Florida, USA.

Massini, M and Miller, RJ and Hodson, HP and Collings, N (2010) A NOVEL TECHNIQUE FOR MEASURING STAGNATION QUANTITIES AND GAS COMPOSITION IN HIGH TEMPERATURE FLOWS. In: UNSPECIFIED pp. 223-233..

Naylor, EMJ and Duenas, CO and Miller, RJ and Hodson, HP (2010) Optimization of Nonaxisymmetric Endwalls in Compressor S-Shaped Ducts. In: UNSPECIFIED -..

Ong, J and Miller, RJ and Denton, JD (2010) The prediction of hot streak migration in a high-pressure turbine. P I MECH ENG A-J POW, 224. pp. 119-128. ISSN 0957-6509

Ong, J and Miller, RJ and Denton, JD (2010) The prediction of hot streak migration in a high-pressure turbine. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 224. pp. 119-128. ISSN 0957-6509

Popovic, I and Hodson, HP (2010) AEROTHERMAL IMPACT OF THE INTERACTION BETWEEN HUB LEAKAGE AND MAINSTREAM FLOWS IN HIGHLY-LOADED HP TURBINE BLADES. In: UNSPECIFIED pp. 965-976..

Sargeant, MA and Hynes, TP and Graham, WR and Hileman, JI and Drela, M and Spakovszky, ZS (2010) Stability of Hybrid-Wing-Body-Type Aircraft with Centerbody Leading-Edge Carving. J AIRCRAFT, 47. pp. 970-974. ISSN 0021-8669

Schabowski, Z and Hodson, H and Giacche, D and Power, B and Stokes, MR (2010) AEROMECHANICAL OPTIMISATION OF A WINGLET-SQUEALER TIP FOR AN AXIAL TURBINE. In: UNSPECIFIED pp. 1593-1607..

Tan, CS and Day, I and Morris, S and Wadia, A (2010) Spike-Type Compressor Stall Inception, Detection, and Control. ANNU REV FLUID MECH, 42. pp. 275-300. ISSN 0066-4189

Tucker, PG (2010) Hybrid LES approach for practical turbomachinery flows. In: Joint Symposium of DFG FOR 1066 and DLR-Airbus C2A2S2E "Simulation of Wing and Nacelle Stall", 22-6-2010 to 23-6-2010, Braunschweig, Germany.

Tucker, PG (2010) Hybrid LES for practical turbomachinery flows. In: U.K. National Conference on Computational Mechanics in Engineering, 29-3-2010 to 31-3-2010, Southampton, UK.

Tucker, PG (2010) LES in turbomachinery. In: NUMECA German user conference 2010 on Advanced CFD Methods and Applications in Turbomachinery, 26-10-2010 to 27-10-2010, Nurnberg, Germany.

Tucker, PG (2010) LES of complex geometry jets. In: UKAA Consortium Conference, 7-4-2010 to 8-4-2010, Loughborough University, Leicester, UK.

Tucker, PG (2010) LES of complex geometry jets. In: UK Applied Aerodynamics Consortium Conference, 5-4-2010 to 6-4-2010, Loughborough University, England.

Tucker, PG and Eastwood, S and Klostermeier, C and Jefferson Loveday, RJ and Tyacke, JC and Liu, Y (2010) Hybrid LES approach for practical turbomachinery flows: Part 1 - hierarchy and example simulations. In: ASME Turbo Expo 2010, 14-6-2010 to 18-6-2010, Glasgow, Scotland, UK pp. 997-1009..

Tucker, PG and Eastwood, S and Klostermeier, C and Xia, H and Ray, P and Tyacke, JC and Dawes, WN (2010) Hybrid LES approach for practical turbomachinery flows: Part 2 - further applications. pp. 1055-1067.

Tucker, PG and Xia, H (2010) Chevron jet LES status. In: 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 4-1-2010 to 7-1-2010, Orlando, Florida, USA.

Tucker, PG and Xia, H (2010) Chevron jet LES status. 48th AIAA Aerospace Sciences Meeting.

Vera-Morales, M and Hall, CA (2010) Modeling Performance and Emissions from Aircraft for the Aviation Integrated Modelling Project. In: UNSPECIFIED pp. 812-819..

Ward, CM and Duffin, M and Miller, RJ and Heffer, JJH (2010) Unsteady ejectors: The effect of driver jet mark-space ratio. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition.

Watson, R and Tucker, PG (2010) LES of film cooling. In: UKTC Annual Review Workshop, 2-9-2010 to 3-9-2010, Imperial College London.

Xia, H and Tucker, PG (2010) Differential equations for generating multiblock mesh partitions. In: Transcendata Hexahedral Meshing and CFD Blocking Seminar, 9-3-2010 to 10-3-2010, Cambridge, UK.

Xia, H and Tucker, PG (2010) Finite volume distance field and its application to medial axis transforms. International Journal of Numerical Methods in Engineering, 82. pp. 114-134. ISSN 1097-0207

Xia, H and Tucker, PG (2010) Finite volume distance field solution applied to medial axis transform. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition.

Xia, H and Tucker, PG (2010) Numerical simulation of single-stream jets from a serrated nozzle. In: ETMM8: 8th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements, 9-6-2010 to 11-6-2010, Marseille, France pp. 127-132..

Xia, H and Tucker, PG and Dawes, WN (2010) Level sets for CFD in aerospace engineering. Progess in Aerospace Sciences, 46. pp. 274-283. ISSN 0376-0421

Xu, JY and Lu, TJ and Hodson, HP and Fleck, NA (2010) Analysis of thermal dispersion in an array of parallel plates with fully-developed laminar flow. INT J HEAT FLUID FL, 31. pp. 57-69. ISSN 0142-727X

Yoon, S and Curtis, E and Denton, J and Longley, J (2010) The effect of clearance on shrouded and unshrouded turbines at two levels of reaction. Proceedings of the ASME Turbo Expo, 7. pp. 1231-1241.

2009

Brandvik, T and Pullan, G (2009) An accelerated 3D Navier-Stokes solver for flows in turbomachines. Proceedings of the ASME Turbo Expo, 7. pp. 619-629.

Brandvik, T and Pullan, G (2009) An accelerated 3D Navier-Stokes solver for flows in turbomachines. In: ASME IGTI Turbo Expo, -6-2009 to --, Orlando, Florida, USA.

Curtis, EM and Denton, JD and Longley, JP and Rosic, B (2009) CONTROLLING TIP LEAKAGE FLOW OVER A SHROUDED TURBINE ROTOR USING AN AIR-CURTAIN. In: UNSPECIFIED pp. 885-894..

Dawes, WN and Harvey, SA and Fellows, S and Eccles, N and Jaeggi, D and Kellar, WP (2009) A practical demonstration of scalable, parallel mesh generation. In: UNSPECIFIED.

Dawes, WN and Kellar, WP and Harvey, SA (2009) Using Level Sets as the basis for a scalable, parallel geometry engine and mesh generation system. In: UNSPECIFIED.

Dawes, WN and Kellar, WP and Richardson, GA (2009) APPLICATION OF TOPOLOGY-FREE OPTIMIZATION TO MANAGE COOLED TURBINE TIP HEAT LOAD. In: UNSPECIFIED pp. 533-543..

Dickens, T and Day, I (2009) THE DESIGN OF HIGHLY LOADED AXIAL COMPRESSORS. In: UNSPECIFIED pp. 57-67..

Eastwood, S and Tucker, PG and Xia, H and Klostermeier, C (2009) Developing large eddy simulation for turbomachinery applications. Philosophical Transactions of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 367. pp. 2999-3013. ISSN 1364-503X

Gardner, A and Hall, CA (2009) Application of boundary layer ingestion to an Uumanned air vehicle. In: 19th International Symposium on Airbreathing Engines, ISABE' 09, 7-9-2009 to 11-9-2009, Montreal, Canada.

Goloviznin, VM and Karabasov, SA and Kozubskaya, TK and Maksimov, NV (2009) CABARET scheme for the numerical solution of aeroacoustics problems: Generalization to linearized one-dimensional Euler equations. COMP MATH MATH PHYS+, 49. pp. 2168-2182. ISSN 0965-5425

Goodhand, MN and Miller, RJ (2009) COMPRESSOR LEADING EDGE SPIKES: A NEW PERFORMANCE CRITERION. In: UNSPECIFIED pp. 1553-1562..

Hall, CA (2009) Low noise engine design for the silent aircraft initiative. The Aeronautical Journal, 113. pp. 599-607. ISSN 0001-9240

Hall, CA and Schwartz, E and Hileman, JI (2009) Assessment of technologies for the silent aircraft initiative. Journal of Propulsion and Power, 25. pp. 1153-1162. ISSN 0748-4658

Heffer, JJH and Miller, RJ (2009) Performance of choked unsteady ejector-nozzles for use in pressure-gain combustors. 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition.

Hodson, HP and Hynes, TP and Greitzer, EM and Tan, CS (2009) A PHYSICAL INTERPRETATION OF STAGNATION PRESSURE AND ENTHALPY CHANGES IN UNSTEADY FLOW. In: UNSPECIFIED pp. 773-784..

Houghton, T and Day, I (2009) Enhancing the stability of subsonic compressors using casing grooves. Proceedings of the ASME Turbo Expo, 7. pp. 39-48.

Karabasov, SA and Berloff, PS and Goloviznin, VM (2009) CABARET in the ocean gyres. OCEAN MODEL, 30. pp. 155-168. ISSN 1463-5003

Karabasov, SA and Goloviznin, VM (2009) Compact Accurately Boundary-Adjusting high-REsolution Technique for fluid dynamics. J COMPUT PHYS, 228. pp. 7426-7451. ISSN 0021-9991

Karabasov, SA and Kopiev, VF and Goloviznin, VM (2009) On a classical problem of acoustic wave scattering by a free vortex: Numerical modelling. 15th AIAA/CEAS Aeroacoustics Conference (30th AIAA Aeroacoustics Conference).

Krishnababu, SK and Dawes, WN and Hodson, HP and Lock, GD and Hannis, J and Whitney, C (2009) Aerothermal investigation of tip leakage flow in axial flow turbines Part II - effect of relative casing motion. Transactions of the ASME Journal of Turbomachinery, 131. 011007-. ISSN 0889-504X

Krishnababu, SK and Hodson, HP and Dawes, WN and Newton, PJ and Lock, GD (2009) Numerical and experimental investigation of tip leakage flow and heat transfer using idealised rotor-tip models at transonic conditions. Aeronautical Journal, 113. pp. 165-176. ISSN 0001-9240

Krishnababu, SK and Newton, PJ and Dawes, WN and Lock, GD and Hodson, HP and Hannis, J and Whitney, C (2009) Aerothermal investigation of tip leakage flow in axial flow turbines Part I - effect of tip geometry and tip clearance gap. Transactions of the ASME Journal of Turbomachinery, 131. 011006-. ISSN 0889-504X

Markesteijn, AP and Usta, OB and Ali, I and Balazs, AC and Yeomans, JM (2009) Flow injection of polymers into nanopores. SOFT MATTER, 5. pp. 4575-4579. ISSN 1744-683X

Newton, PJ and Lock, GD and Krishnababu, SK and Hodson, HP and Dawes, WN and Hannis, J and Whitney, C (2009) Aerothermal investigation of tip leakage flow in axial flow turbines Part III - tip cooling. Transactions of the ASME Journal of Turbomachinery, 131. 011008-. ISSN 0889-504X

Ray, PK and Dawes, WN (2009) Detached-eddy simulation of transonic flow past a fan-blade section. In: UNSPECIFIED.

Saeed, TI and Graham, WR and Babinsky, H and Eastwood, JP and Hall, CA and Jarrett, JP and Lone, MM and Seffen, KA (2009) Conceptual design for a laminar flying wing aircraft. In: 27th Applied Aerodynamics Conference, 22-6-2009 to 25-6-2009, San Antonio, Texas, USA.

Sargeant, MA and Hynes, TP and Graham, WR and Hileman, JI and Drela, M and Spakovsky, ZS (2009) Stability in blended wing body type aircraft with centerbody leading edge. AIAA Journal. ISSN 0001-1452

Tucker, PG (2009) Developing large eddy simulation for turbomachinery applications including jet noise. In: EPSRC Symposium Workshop on Computational Fluid Dynamics, 1-9-2009 to 3-9-2009, Mathematics Research Centre, University of Warwick.

Tucker, PG and Karabasov, SA (2009) Unstructured grid solution approach for the eikonal equation with acoustics in mind. In: 47th AIAA Aerospace Sciences Meeting and Exhibit, 5-1-2009 to 8-1-2009, Orlando, Florida, USA.

Tucker, PG and Karabasov, SA (2009) Unstructured grid solution of the eikonal equation for acoustics. International Journal of Aeroacoustics, 8. pp. 535-553. ISSN 1475-472X

Tucker, PG and Lardeau, S (2009) Applied large eddy simulation. Philosophical Transactions of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 367. pp. 2809-2818. ISSN 1364-503X

Tucker, PG and Lardeau, S (2009) Introduction applied large eddy simulation. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 367. pp. 2809-2818. ISSN 1364-503X

Vera Morales, M and Hall, CA (2009) Modeling performance and emissions from aircraft for the aviation integrated modeling project. In: 47th AIAA Aerospace Sciences Meeting and Exhibit, 5-1-2009 to 8-1-2009, Orlando, Florida, USA.

Wheeler, APS and Sofia, A and Miller, RJ (2009) The Effect of Leading-Edge Geometry on Wake Interactions in Compressors. J TURBOMACH, 131. -. ISSN 0889-504X

Xia, H and Tucker, PG (2009) Distance solutions for medial axis transform. In: 18th International Meshing Roundtable, 25-10-2009 to 28-10-2009, Salt Lake City, USA pp. 247-250..

Xia, H and Tucker, PG (2009) Use of differential equations for hexahedral mesh generation. In: CFMS Workshop on Medial Axis Technology, 23-9-2009 to --, Civil and Computational Engineering Centre, University of Swansea, UK.

Xia, H and Tucker, PG and Eastwood, S (2009) Large-eddy simulations of chevron jet flows with noise predictions. International Journal of Heat and Fluid Flow, 30. pp. 1067-1079. ISSN 0142-727X

Yoon, S and Denton, J and Curtis, E and Longley, J and Pullan, G (2009) IMPROVING INTERMEDIATE PRESSURE TURBINE PERFORMANCE BY USING A NON-ORTHOGONAL STATOR. In: UNSPECIFIED pp. 895-904..

Zachariadis, A and Hall, CA (2009) APPLICATION OF A NAVIER-STOKES SOLVER TO THE STUDY OF OPEN ROTOR AERODYNAMICS. In: UNSPECIFIED pp. 69-80..

Zachariadis, A and Hall, CA (2009) Application of a Navier-Stokes solver to the study of open rotor aerodynamics. In: ASME Turbo Expo, 8-6-2009 to 12-6-2009, Orlando, Florida.

Zhao, L and Dawes, WN and Parks, GT and Jarrett, JP and Yang, S (2009) Robust airfoil design with respect to boundary layer transition. In: 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 17th AIAA/ASME/AHS Adaptive Structures Conference, 11th AIAA Non-Deterministic Approaches Conference, 4-5-2009 to 7-5-2009, Palm Springs, California, USA.

de la Rosa Blanco, E and Hodson, HP and Vazquez, R (2009) Effect of the leakage flows and the upstream platform geometry on the endwall flows of a turbine cascade. Transactions of the ASME Journal of Turbomachinery, 131. 011004-. ISSN 0889-504X

2008

Atkins, NR and Thorpe, SJ and Ainsworth, RW (2008) Unsteady Effects on Transonic Turbine Blade-Tip Heat Transfer. ASME Conference Proceedings, 2008. 1025-1038-1025-1038.

Bell, CP and Clarkson, PJ and Dawes, WN (2008) Improving the turbine cooling conceptual design process. In: ASME Turbo Expo 2008, 9-5-2008 to 13-5-2008, Berlin, Germany pp. 2631-2640..

Brandvik, T and Pullan, G (2008) Acceleration of a 3-D Euler solver using commodity graphics hardware. In: 46th AIAA Aerospace Sciences Meeting and Exhibit, 7-1-2008 to 10-1-2008, Reno, Nevada, USA.

Brandvik, T and Pullan, G (2008) Acceleration of a 3D Euler solver using commodity graphics hardware. In: 46th AIAA Aerospace Sciences Meeting and Exhibit, 7-1-2008 to 10-1-2008, Reno, Nevada, USA -..

Brandvik, T and Pullan, G (2008) SBLOCK: A framework for stencil operations on structured grids for many-core architectures. In: MRSC 2008 - Many-Core and Reconfigurable Super Computing, 1-4-2008 to 3-4-2008, Belfast, UK.

Coull, JD and Thomas, RL and Hodson, H (2008) Velocity distributions for low pressure turbines. In: ASME Turbo Expo 2008, 9-5-2008 to 13-5-2008, Berlin, Germany.

Coull, JD and Thomas, RL and Hodson, HP (2008) VELOCITY DISTRIBUTIONS FOR LOW PRESSURE TURBINES. In: UNSPECIFIED pp. 1191-1206..

Coull, JD and Thomas, RL and Hodson, HP (2008) Velocity distributions for low pressure turbines. Proceedings of the ASME Turbo Expo, 6.

Dawes, WN (2008) Rapid prototyping design optimization using flow sculpting. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 130. -. ISSN 0889-504X

Dawes, WN and Favaretto, CF and Harvey, SA and Fellows, S and Richardson, GA (2008) Towards topology-free optimization - An application to turbine internal cooling geometries. In: UNSPECIFIED.

Day, I and Williams, J and Freeman, C (2008) Rain igestion in axial flow compressors at part speed. Journal of Turbomachinery, 130. ISSN 0889-504X

Eastwood, S and Tucker, PG and Xia, H (2008) High performance computing in jet aerodynamics. In: Parallel Scientific Computing and Optimisation: Advances and Applications, 5-2-2008 to 8-2-2008, Druskinkai, Lithuania pp. 193-206..

Evans, S and Hodson, HP and Hynes, TP and Wakelam, C and Hiller, SJ (2008) Controlling separation on a simulated compressor blade using Vortex generator jets. In: 4th Flow Control Conference, 16-9-2008 to 19-9-2008, Seattle, WA, USA.

Gbadebo, SA and Cumpsty, NA and Hynes, TP (2008) Control of three-dimensional separations in axial compressors by tailored boundary layer suction. Transactions of the ASME, Journal of Turbomachinery, 130. ISSN 0889-504X

Haneef, I and Ali, SZ and Udrea, F and Coull, JD and Hodson, HP (2008) CMOS MEMS hot-film sensors. In: XIX Biannual Symposium on Measuring Techniques in Turbomachinery: Transonic and Supersonic Flow in Cascades and Turbomachines, 7-4-2008 to 8-4-2008, Sint Genesius Rode, Belgium.

Haneef, I and Ali, SZ and Udrea, F and Coull, JD and Hodson, HP (2008) Laminar to turbulent flow transition measurements using an array of SOI-CMOS MEMS wall shear stress sensors. In: 7th IEEE Conference on Sensors, 26-10-2008 to 29-10-2008, Lecce, Italy.

Haneef, I and Coull, JD and Ali, SZ and Udrea, F and Hodson, HP (2008) Laminar to turbulent flow transition measurements using an array of SOI-CMOS MEMS wall shear stress sensors. Proceedings of IEEE Sensors. pp. 57-61.

Haneef, I and Coull, JD and Ali, SZ and Udrea, F and Hodson, HP (2008) Laminar to turbulent flow transition measurements using an array of SOI-CMOS MEMS wall shear stress sensors. In: 7th IEEE Conference on Sensors, 26-10-2008 to 29-10-2008, Lecce, Italy.

Haneef, I and Guha, PK and Ali, SZ and Coull, JD and Udrea, F and Hodson, HP (2008) SOI MEMS wall shear stress sensors with CMOS electronics. In: 22nd International Conference EUROSENSORS, 7-9-2008 to 10-9-2008, Dresden, Germany.

Haneef, I and Guha, PK and Ali, SZ and Coull, JD and Udrea, F and Hodson, HP (2008) SOI MEMS anemometer with CMOS integrated electronics. In: 2nd joint EVI-GTI 2008 / PIWG International Gas Turbine Instrumentation Conference, 24-9-2008 to 26-9-2008, Seville, Spain.

Heffer, JJH and Miller, RJ and Freeman, C (2008) The time-resolved flow within an unsteady ejector. 46th AIAA Aerospace Sciences Meeting and Exhibit.

Hodson, HP and Haneef, I and Guha, PK and Ali, SZ (2008) SOI MEMS wall shear stress sensors with CMOS electronics. In: Eurosensors XXII, 7-9-2008 to 10-9-2008, Dresden, Germany.

Hodson, HP and Haneef, I and Guha, PK and Ali, SZ and Coull, JD and Udrea, F (2008) SOI MEMS Anemometer with integrated CMOS electronics. In: 2nd Joint EVI-GTI / PIWG International Gas Turbine Instrumentation Conference, 24-9-2008 to 26-9-2008, Seville, Spain.

Hodson, HP and Johannson, PBV (2008) Aggressive intermediate ducts aerodynamics for competitive & environmentally friendly jet engines (AIDA). In: ECCOMAS Congress 2008: 8th World Congress on Computational Mechanics, 30-6-2008 to 5-7-2008, Venice, Italy.

Hsu, PL and Cheng, SJ and Saumarez, RC and Dawes, WN and McMahon, RA (2008) An extended computational model of the circulatory system for designing ventricular assist devices. ASAIO J, 54. pp. 594-599.

Jaeggi, DM and Parks, GT and Dawes, WN and Clarkson, PJ (2008) Robust multi-fidelity aerodynamic design optimization using surrogate models. In: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 10-9-2008 to 12-9-2008, Victoria, British Columbia, Canada.

Janke, E and Hodson, HP and Faccini, B and Popovic, I and Lehmann, K and Georgakis, C and Pons, L and Lutum, E and Wallin, F and Dawes, WN and Favaretto, F (2008) Selected aerothermal CFD analyses of high-pressure turbine topics within the AITEB-2 project. In: ECCOMAS Congress 2008: 8th World Congress on Computational Mechanics, 30-6-2008 to 5-7-2008, Venice, Italy.

Karabasov, SA and Afsar, MZ and Hynes, TP and Dowling, AP and McMullan, WA and Pokora, CD and Page, GJ and McGuirk, JJ (2008) Using large eddy simulation within an acoustic analogy approach for jet noise modelling. In: 14th AIAA/CEAS Aeroacoustics Conference, 5-5-2008 to 7-5-2008, Vancouver, Canada pp. 2630-2645..

Karabasov, SA and Goloviznin, VM (2008) Contrasting high-resolution characteristic shock-capturing methods in aeroacoustic test problems. 14th AIAA/CEAS Aeroacoustics Conference (29th AIAA Aeroacoustics Conference).

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM and Clarkson, PJ (2008) Biobjective design optimization for axial compressors using tabu search. AIAA Journal, 46. pp. 701-711. ISSN 0001-1452

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM and Clarkson, PJ (2008) Insight into high-quality aerodynamic design spaces through multi-objective optimization. Computer Modeling in Engineering and Science, 37. pp. 1-44. ISSN 1526-1492

Krishnababu, SK and Hodson, HP and Booth, GD and Lock, GD and Dawes, WN (2008) Aero-thermal investigation of tip leakage flow in a film cooled industrial turbine rotor. Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea and Air, 4. pp. 177-186.

Lo Iacono, G and Reynolds, AM and Tucker, PG (2008) Particle deposition onto rough surfaces. J FLUID ENG-T ASME, 130. -. ISSN 0098-2202

Mason, SA and Miller, RJ and Taylor, MD (2008) Fluid mechanics of pulse pressure-gain combustors. 46th AIAA Aerospace Sciences Meeting and Exhibit.

Massini, M and Miller, RJ and Hodson, H (2008) A new intermittent aspirated probe for the measurement of stagnation quantities in high temperature gases. In: ASME Turbo Expo 2008, 9-5-2008 to 13-5-2008, Berlin, Germany.

Massini, M and Miller, RJ and Hodson, HP (2008) A NEW INTERMITTENT ASPIRATED PROBE FOR THE MEASUREMENT OF STAGNATION QUANTITIES IN HIGH TEMPERATURE GASES. In: UNSPECIFIED pp. 145-152..

Montomoli, F and Hodson, HP and Haselbach, F (2008) Effect of roughness and unsteadiness on the performance of a new LPT blade at low Reynolds numbers. In: ASME Turbo Expo 2008, 9-5-2008 to 13-5-2008, Berlin, Germany.

Naylor, EMJ and Duenas, CO and Miller, RJ and Hodson, HP (2008) OPTIMISATION OF NON-AXISYMMETRIC ENDWALLS IN COMPRESSOR S-SHAPED DUCTS. In: UNSPECIFIED pp. 305-316..

Naylor, EMJ and Ortiz Duenas, C and Miller, RJ and Hodson, H (2008) Optimisation of non-axisymmetric endwalls in compressor S-shaped ducts. In: ASME Turbo Expo 2008, 9-5-2008 to 13-5-2008, Berlin, Germany.

Nieborg, VHJ and Markesteijn, AP and Lindken, RH and Witkamp, GJ and Kramer, HJM and Westerweell, J (2008) Mixing with EOF for a precipitation reaction. J DISPER SCI TECHNOL, 29. pp. 587-592. ISSN 0193-2691

Offord, T and Miller, RJ and Dawson, JR and Heffer, JJH and Mason, S and Taylor, M (2008) Improving the performance of a valveless pulse combustor using unsteady fuel injection. In: UNSPECIFIED.

Ong, J and Miller, RJ (2008) HOT STREAK AND VANE COOLANT MIGRATION IN A DOWNSTREAM ROTOR. In: UNSPECIFIED pp. 1749-1760..

Ong, J and Miller, RJ (2008) Hot streak and vane coolant migration in a downstream rotor. Proceedings of the ASME Turbo Expo, 6.

Opoka, MM and Hodson, HP (2008) Experimental investigation of unsteady transition processes on high-lift T106A turbine blades. In: UNSPECIFIED pp. 424-432..

Opoka, MM and Hodson, HP (2008) Transition on the T106 LP turbine blade in the presence of moving upstream wakes and downstream potential fields. In: UNSPECIFIED -..

Opoka, MM and Thomas, RL and Hodson, HP (2008) Boundary layer transition on the high lift T106A low-pressure turbine blade with an oscillating downstream pressure field. In: UNSPECIFIED -..

Parikesit, GO and Markesteijn, AP and Piciu, OM and Bossche, A and Westerweel, J and Young, IT and Garini, Y (2008) Size-dependent trajectories of DNA macromolecules due to insulative dielectrophoresis in submicrometer-deep fluidic channels. Biomicrofluidics, 2. 24103-.

Pullan, G and Harvey, NW (2008) The influence of sweep on axial flow turbine aerodynamics in the endwall region. In: UNSPECIFIED -..

Reynolds, AM and Tucker, PG and Lo Iacono, G (2008) Particle deposition onto rough surfaces. Transactions of the ASME, Journal of Fluids Engineering, 130. 074501-1. ISSN 0098-2202

Thomas, RL and Hodson, HP (2008) Rapid prototyping for wind tunnel testing and instrumentation. In: XIX Biannual Symposium on Measuring Techniques in Turbomachinery: Transonic and Supersonic Flow in Cascades and Turbomachines, 7-4-2008 to 8-4-2008, Sint Genesius Rode, Belgium.

Timmerman, BH and Skeen, AJ and Bryanston Cross, PJ and Tucker, PG and Jefferson Loveday, RJ and Paduano, J and Guenette Jr, GR (2008) High-speed digital visualization and high-frequency automated shock tracking in supersonic flows. Optical Engineering, 47. ISSN 0091-3286

Tucker, PG (2008) The LES model's role in jet noise. Progress in Aerospace Sciences, 44. pp. 427-436. ISSN 0376-0421

Tucker, PG and Eastwood, S and Xia, H and Loveday, RJ (2008) Exploring the LES model's role with jet noise in mind. In: 46th AIAA Aerospace Sciences Meeting and Exhibit, 7-1-2008 to 10-1-2008, Reno, Nevada, USA pp. 6713-6720..

Tyacke, J and Tucker, P and Nithiarasu, P (2008) Unsteady CFD Modelling of Turbulent Flows for Electronics. In: UNSPECIFIED pp. 1157-1163..

Wakelam, C and Hodson, HP and Hynes, TP and Evans, S and Chanez, P (2008) Experimental investigation of the effect of boundary layer trips on a separation typical of low throttle intakes in crosswinds. In: 4th Flow Control Conference, 23-6-2008 to 26-6-2008, Seattle, WA, USA.

Wakelam, CT and Hynes, TP and Evans, SW and Hodson, HP and Chanez, P (2008) The effect of boundary layer trips on intake separation in crosswinds. In: UNSPECIFIED.

Wheeler, APS and Miller, RJ (2008) Compressor wake/leading-edge interactions at off design incidences. Proceedings of the ASME Turbo Expo, 6. pp. 1795-1806.

Wissink, JG and Hodson, HP and Rodi, W (2008) Separating boundary layer flow affected by periodically incoming small-scale fluctuations. In: The 2nd Interantioanl Conference on Jets Wakes and Separated Flows (ICJWSF-2008), 16-9-2008 to 19-9-2008, TU Berlin, Berlin, Germany.

Xia, H and Tucker, PG and Eastwood, S (2008) Towards jet flow LES of conceptual nozzles for acoustic predictions. 46th AIAA Aerospace Sciences Meeting and Exhibit.

2007

Afsar, MZ and Dowling, AP and Karabasov, SA (2007) Jet noise in the 'zone of silence'. In: 13th AIAA/CEAS Aeroacoustics Conference, 21-5-2007 to 23-5-2007, Rome, Italy.

Arnold, AK and Nithiarasu, P and Tucker, PG (2007) Finite element modelling of electro-osmotic flows on unstructured meshes. International Journal of Numerical Methods in Heat and Fluid Flow, 18. pp. 67-82. ISSN 0961-5539

Atkins, NR and Miller, RJ and Ainsworth, RW (2007) The development of aerodynamic performance measurements in a transient test facility. Transactions of the ASME, Journal of Turbomachinery. ISSN 0889-504X

Bell, C and Wynn, DC and Dawes, WN and Clarkson, PJ (2007) Using meta-data to enhance process simulation and identify improvements. In: 16th International Conference on Engineering Design (ICED'07), 28-8-2007 to 31-8-2007, Paris, France.

Brandvik, T and Pullan, G (2007) Acceleration of a 2D Euler solver using graphics hardware. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Brandvik, T and Pullan, G (2007) Acceleration of a two-dimensional Euler flow solver using commodity graphics hardware. Proceedings of the Institution of Mechanical Engineers, Pt C: Journal of Mechanical Engineering Science, 221. pp. 1745-1748. ISSN 0954-4062

Crichton, D and Xu, L and Hall, CA (2007) Preliminary fan design for a silent aircraft. Transactions of the ASME Journal of Turbomachinery, 129. pp. 184-191. ISSN 0889-504X

Dawes, WN (2007) Turbomachinery computational fluid dynamics: asymptotes and paradigm shifts. Philos Transact A Math Phys Eng Sci, 365. pp. 2553-2585. ISSN 1364-503X

Dawes, WN and Harvey, SA and Fellows, S and Favaretto, CF and Velivelli, A (2007) Viscous layer meshes from level sets on cartesian meshes. In: UNSPECIFIED pp. 6707-6715..

De La Rosa Blanco, E and Hall, CA and Crichton, D (2007) Challenges in the Silent Aircraft engine design. Collection of Technical Papers - 45th AIAA Aerospace Sciences Meeting, 8. pp. 5418-5437.

Dowling, AP and Morgans, AS (2007) Passive and active control of combustion oscillations. In: Lecture Series- Von Karman Institute for Fluid Dynamics, -- to -- -..

Duenas, CO and Miller, RJ and Hodson, HP and Longley, JP (2007) Effect of length on compressor inter-stage duct performance. In: UNSPECIFIED pp. 319-329..

Gbadebo, SA and Cumpsty, NA and Hynes, TP (2007) Interaction of tip clearance flow and three-dimensional separations in axial compressors. Transactions of the ASME, Journal of Turbomachinery, 129. pp. 679-685. ISSN 0889-504X

Gbadebo, SA and Cumpsty, NA and Hynes, TP (2007) Interaction of tip clearance flow and three-dimensional separations in axial compressors. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 129. pp. 679-685. ISSN 0889-504X

Ghisu, T and Molinari, M and Parks, GT and Dawes, WN and Jarrett, JP and Clarkson, PJ (2007) Axial compressor intermediate duct design and optimisation. In: 3rd AIAA Multidisciplinary Design Optimization Specialist Conference, 23-4-2007 to 26-4-2007, Honolulu, Hawaii, USA.

Goloviznin, VM and Semenov, VN and Korortkin, IA and Karabasov, SA (2007) A novel computational method for modelling stochastic advection in heterogeneous media. Transport in Porous Media, 66. pp. 439-456. ISSN 0169-3913

Hall, CA (2007) Engines for the silent aircraft initiative. Proceedings of the Royal Aeronautical Society.

Hall, CA and Crichton, D (2007) Engine design studies for a silent aircraft. Transactions of the ASME Journal of Turbomachinery, 129. pp. 479-487. ISSN 0889-504X

Hall, CA and Schwartz, E (2007) Impact of future propulsion technologies on the trade-offs between aircraft noise and fuel consumption. In: 18th International Symposium on Airbreathing Engines, -9-2007 to --, Beijing, China.

Hall, CA and de la Rosa Blanco, E (2007) Challenges in the silent aircraft engine design. In: 45th Aerospace Sciences Meeting and Exhibit Conference, 5-1-2007 to 12-1-2007, Reno, Nevada, US.

Haneef, I and Ali, SZ and Udrea, F and Coull, JD and Hodson, HP (2007) High performance SOI-CMOS wall shear stress sensors. In: IEEE Sensors, 28-10-2007 to 31-10-2007, Atlanta, GA, USA pp. 1060-1064..

Hazby, R and Xu, L (2007) Effects of leading edge sweep on the performance of a centrifugal impeller. In: 18th ISABE(International Symposium on AirBreathing Engines) Conference, 2-9-2007 to 7-9-2007, Beijing, China.

Hutabarat, W and Parks, GT and Jarrett, JP and Dawes, WN and Clarkson, PJ (2007) Aerodynamic topology optimisation using an implicit representation and a multiobjective genetic algorithm. In: 8th International Conference on Evolution Artificielle, 29-10-2007 to 31-10-2007, Tours, France pp. 148-159..

Jarrett, JP and Dawes, WN and Clarkson, PJ (2007) An approach to integrated multi-disciplinary turbomachinery design. Transactions of the ASME, Journal of Turbomachinery, 129. pp. 488-494. ISSN 0889-504X

Jouvray, A and Tucker, PG and Liu, Y (2007) On non-linear RANS models when predicting more complex geometry room air flows. International Journal of Heat and Fluid Flow, 28. pp. 275-288. ISSN 0142-727X

Karabasov, SA and Goloviznin, VA (2007) New efficient high-resolution method for nonlinear problems in aeroacoustics. In: UNSPECIFIED pp. 2861-2871..

Karabasov, SA and Goloviznin, VM (2007) A new efficient high-resolution method for non-linear problems in fluid mechanics. In: UNSPECIFIED pp. 269-272..

Karabasov, SA and Hynes, TP and Dowling, AP (2007) Effect of mean-flow evolution on sound propagation through non-uniform jet flows. In: 13th AIAA/CEAS Aeroacoustics Conference, -5-2007 to --, Rome, Italy.

Kipouros, T and Molinari, M and Dawes, WN and Parks, GT and Savill, AM and Jenkins, KW (2007) An investigation of the potential for enhancing the computational turbomachinery design cycle using surrogate models and high performance parallelisation. In: ASME Turbo Expo 2007, 14-5-2007 to 17-5-2007, Montreal, Canada pp. 1415-1424..

Krishnababu, SK and Dawes, WN and Hodson, HP and Lock, GD and Hannis, J and Whitney, C (2007) Aero-thermal investigation of tip leakage flow in axial flow turbines Part II - effect of relative casing motion. In: ASME Turbo Exposition 2007, 14-5-2007 to 17-5-2007, Montreal, Canada pp. 739-748..

Krishnababu, SK and Newton, PJ and Dawes, WN and Lock, GD and Hodson, HP and Hannis, J and Whitney, C (2007) Aero-thermal investigation of tip leakage flow in axial flow turbines Part I - effect of tip geometry and tip clearance gap. In: ASME Turbo Exposition 2007, 14-5-2007 to 17-5-2007, Montreal, Canada pp. 727-738..

Liu, Y and Tucker, PG (2007) Contrasting zonal LES and non-linear zonal URANS models when predicting a complex electronics system flow. International Journal of Numerical Methods in Engineering, 71. pp. 1-24. ISSN 1097-0207

Liu, Y and Tucker, PG and Kerr, RM (2007) Linear and non-linear large-eddy simulations of a plane jet. Computers and Fluids. ISSN 0045-7930

Longley, JP (2007) Calculating stall and surge transients. In: ASME Turbo Expo 2007: Power for Land, Sea and Air, 14-5-2007 to 17-5-2007, Montreal, Canada.

Longley, JP (2007) Calculating stall and surge transients. In: UNSPECIFIED pp. 125-136..

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2007) The effect of an upstream turbine on a low-aspect ratio vane. Transactions of the ASME, Journal of Turbomachinery. ISSN 0889-504X

Newton, PJ and Lock, GD and Krishnababu, SK and Hodson, HP and Dawes, WN and Hannis, J and Whitney, C (2007) Aero-thermal investigation of tip leakage flow in axial flow turbines Part III - tip cooling. In: ASME Turbo Exposition 2007, 14-5-2007 to 17-5-2007, Montreal, Canada pp. 317-328..

Opoka, MM and Hodson, HP (2007) Transition on the T106 LP turbine blade in the presence of moving upstream wakes and downstream potential fields. In: ASME Turbo Exposition 2007, 14-5-2007 to 17-5-2007, Montreal, Canada.

Opoka, MM and Hodson, HP (2007) Transition on the T106 LP turbine blade in the presence of moving upstream wakes and downstream potential fields. In: UNSPECIFIED pp. 1091-1104..

Ortiz Duenas, C and Miller, RJ and Hodson, HP and Longley, JP (2007) Effect of length on compressor inter-stage duct performance. In: ASME Turbo Exposition 2007, 14-5-2007 to 17-5-2007, Montreal, Canada.

Plas, AP and Madani, V and Sargeant, MA and Greitzer, EM and Hall, CA and Hynes, TP (2007) Performance of a boundary layer (BLI) propulsion system. In: 45th AIAA Aerospace Sciences Meeting and Exhibit, 8-1-2007 to 11-1-2007, Reno, NV, US.

Plas, AP and Sargeant, MA and Madani, V and Crichton, D and Greitzer, EM and Hynes, TP and Hall, CA (2007) Performance of a Boundary Layer Ingesting (BLI) propulsion system. In: UNSPECIFIED pp. 5368-5388..

Pullan, G and Harvey, NW (2007) Influence of sweep on axial flow turbine aerodynamics at midspan. ASME Transactions, Journal of Turbomachinery, 129. pp. 591-598. ISSN 0889-504X

Pullan, G and Harvey, NW (2007) The influence of sweep on axial flow turbine aerodynamics at midspan. Transactions of the ASME, Journal of Turbomachinery, 129. pp. 591-598. ISSN 0889-504X

Pullan, G and Harvey, NW (2007) The influence of sweep on axial flow turbine aerodynamics in the endwall region. In: ASME Turbo Expo - Power for Land, Sea and Air, 14-5-2007 to 17-5-2007, Montreal, Canada pp. 735-748..

Reid, K and Denton, JD and Pullan, G and Curtis, EM and Longley, JP (2007) The interaction of turbine inter-platform leakage flow with the mainstream flow. Transactions of the ASME Journal of Turbomachinery, 129. pp. 303-310. ISSN 0889-504X

Rosic, B and Denton, JD and Curtis, EM (2007) The influence of shroud and cavity geometry on turbine performance - an experimental and computational study, Part 1: Shroud geometry. In: ASME Turbo Expo - Power for Land, Sea and Air, 14-5-2007 to 17-5-2007, Montreal, Canada pp. 749-760..

Rosic, B and Denton, JD and Curtis, EM and Peterson, AT (2007) The influence of shroud and cavity geometry on turbine performance - an experimental and computational study, part 2: Exit cavity geometry. In: ASME Turbo Expo - Power for Land, Sea and Air, 14-5-2007 to 17-5-2007, Montreal, Canada pp. 761-772..

Savill, AM and Richardson, GA and Dawes, WN (2007) An unsteady, moving mesh CFD simulation for Harrier hot-gas ingestion control analysis. The Aeronautical Journal, 111. pp. 133-144. ISSN 0001-9240

Schabowski, Z and Hodson, HP (2007) The reduction of over tip leakage loss in unshrouded axial turbines using winglets and squealers. In: ASME Turbo Exposition 2007, 14-5-2007 to 17-5-2007, Montreal, Canada.

Secundov, AN and Birch, SF and Tucker, PG (2007) Propulsive jets and their acoustics. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 365. pp. 2443-2467. ISSN 1364-503X

Simpson, AK and Longley, JP (2007) An experimental study of the inception of rotating stall in a single-stage low-speed axial compressor. In: ASME Turbo Expo 2007: Power for Land, Sea and Air, 14-5-2007 to 17-5-2007, Montreal, Canada.

Simpson, AK and Longley, JP (2007) An experimental study of the inception of rotating stall in a single-stage low-speed axial compressor. In: UNSPECIFIED pp. 87-97..

Thomas, GA and Atkins, NR and Thorpe, SJ and Ainsworth, RW and Harvey, NW (2007) The Effect of a Casing Step on the Over-Tip Aerothermodynamics of a Transonic HP Turbine Stage. ASME Conference Proceedings, 2007. 597-608-597-608.

Thorpe, SJ and Miller, RJ and Yoshino, S and Ainsworth, RW and Harvey, NW (2007) The effect of work processes on the casing heat transfer of a transonic turbine. ASME Transactions, Journal of Turbomachinery, 129. pp. 84-91. ISSN 0889-504X

Thorpe, SJ and Miller, RJ and Yoshino, S and Ainsworth, RW and Harvey, NW (2007) The effect of work processes on the casing heat transfer of a transonic turbine. In: UNSPECIFIED pp. 84-91..

Tian, J and Lu, TJ and Hodson, HP and Queheillalt, DT and Wadley, HNG (2007) Cross flow heat exchange of textile cellular metal core sandwich panels. INT J HEAT MASS TRAN, 50. pp. 2521-2536. ISSN 0017-9310

Tucker, PG (2007) Computational aerodynamics. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 365. pp. 2379-2388. ISSN 1364-503X

Tucker, PG and Liu, Y (2007) Turbulence modeling for flows around convex features giving rapid eddy distortion. INT J HEAT FLUID FL, 28. pp. 1073-1091. ISSN 0142-727X

Tucker, PG and Liu, Y (2007) Turbulence modeling for flows around convex features giving rapid eddy distortion. International Journal of Heat and Fluid Flow, 28. pp. 1073-1091. ISSN 0142-727X

Tucker, PG and Liu, Y (2007) Turbulence modelling for flows around convex features giving rapid eddy distortion. International Journal of Heat and Fluid Flow, 28. pp. 1073-1091. ISSN 0142-727X

Tyacke, JC and Tucker, PG (2007) Unsteady CFD modelling for electronics cooling. In: UNSPECIFIED pp. 760-766..

Tyacke, JC and Tucker, PG (2007) Unsteady CFD modelling of electronics cooling. In: 2007 International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems (EuroSimE 2007), 15-4-2007 to 18-4-2007, London, UK.

Uzol, O and Zhang, XF and Cranstone, A and Hodson, HP (2007) Investigation of unsteady wake-separated boundary layer interaction using particle-image-velocimetry. In: ASME Turbo Exposition 2007, 14-5-2007 to 17-5-2007, Montreal, Canada.

Vera, M and Zhang, XF and Hodson, HP and Harvey, NW (2007) Separation and Transition Control on an Aft-Loaded Ultra-High-Lift LP Turbine Blade at Low Reynolds Numbers: High-Speed Validation. ASME Journal of Turbomachinery, 129. pp. 340-347. ISSN 0889-504X

Vera, M and Zhang, XF and Hodson, HP and Harvey, NW (2007) Separation and transition control on an aft-loaded ultra-high-lift LP turbine blade at low Reynolds numbers: high-speed validation. Transactions of the ASME, Journal of Turbomachinery, 129. pp. 340-347. ISSN 0889-504X

Vera, M and de la Rosa Blanco, E and Hodson, HP and Vazquez, R (2007) Endwall boundary layer development in an engine representative four-stage low pressure turbine rig. In: ASME Turbo Exposition 2007, 14-5-2007 to 17-5-2007, Montreal, Canada.

Wheeler, AP and Miller, RJ and Hodson, HP (2007) The effect of wake induced coherent structures on compressor boundary layers. Transactions of the ASME, Journal of Turbomachinery, 129. ISSN 0889-504X

Wheeler, AP and Sofia, A and Miller, RJ (2007) Effect of length on compressor inter-stage duct performance. In: ASME Turbo Expo - Power for Land, Sea and Air, 14-5-2007 to 17-5-2007, Montreal, Canada.

Wheeler, AP and Sofia, A and Miller, RJ (2007) The effect of leading-edge geometry on wake interactions in compressors. Transactions of the ASME, Journal of Turbomachinery. ISSN 0889-504X

Wheeler, APS and Miller, RJ and Hodson, HP (2007) The effect of wake induced structures on compressor boundary-layers. In: UNSPECIFIED pp. 705-712..

Wheeler, APS and Sofia, A and Miller, RJ (2007) The effect of leading-edge geometry on wake interactions in compressors. In: UNSPECIFIED pp. 1769-1779..

Xu, J and Tian, J and Lu, TJ and Hodson, HP (2007) On the thermal performance of wire-screen meshes as heat exchanger material. INT J HEAT MASS TRAN, 50. pp. 1141-1154. ISSN 0017-9310

Zhang, XF and Hodson, HP (2007) Effects of Reynolds number and freestream turbulence intensity on the unsteady boundary layer development on an ultra-high-lift LPT airfoil. In: ASME Turbo Exposition 2007, 14-5-2007 to 17-5-2007, Montreal, Canada.

2006

Afsar, MZ and Dowling, AP and Karabasov, SA (2006) Comparison of jet noise models. In: 12th AIAA/CEAS Aeroacoustics Conference (27th AIAA Aeroacoustics Conference), 8-5-2006 to 10-5-2006, Cambridge, MA, US pp. 2466-2479..

Arnold, AK and Nithiarasu, P and Tucker, PG (2006) Numerical investigation of electro-osmotic flow (EOF) through micro channels with applications to thermal management in electronic devices. In: 14th ACME Conference, 19-4-2006 to 20-4-2006, Queen's University, Belfast, NI -..

Arnold, AK and Nithiarasu, P and Tucker, PG (2006) Numerical investigation of electro-osmotic flows for microelectronics cooling. In: XVIII National and VII ISHMT/ASME Heat and Mass Transfer Conference, 4-1-2006 to 6-1-2006, IIT Gauhati, India.

Crichton, D and Xu, LP and Hall, CA (2006) Preliminary fan design for a silent aircraft. In: UNSPECIFIED pp. 1663-1672..

Curtis, P and Xu, L and Ford, P (2006) The design, development and testing of a turbine powered simulator for hot gas ingestion testing. SAE Transactions(Journal of Aerospace), 114. pp. 730-739. ISSN 0096-736X

Dawes, WN (2006) Eliminating serial bottlenecks not just in the flow solving but also in mesh generation & geometry management. In: UNSPECIFIED pp. 1355-1362..

Dawes, WN (2006) Eliminating serial bottlenecks not just in the flow solving but also in mesh generation and geometry management. In: ASME Gas Turbine Expo: Power for Land, Sea and Air, 8-5-2006 to 11-5-2006, Barcelona, Spain.

Dawes, WN (2006) Towards a fully parallel integrated geometry kernel, mesh generator, flow solver and post-processor. In: 44th AIAA Aerospace Sciences Meeting and Exhibit, 9-1-2006 to 12-1-2006, Reno, Nevada, US pp. 11280-11286..

Dawes, WN (2006) Turbomachinery CFD: asymptotes and paradigm shifts. In: AIAA 36th Fluid Dynamics Conference, 5-6-2006 to 8-6-2006, San Francisco, CA, US.

Day, IJ and Williams, JC and Freeman, C (2006) Rain ingestion in axial flow compressors at part speed. Transactions of the ASME, Journal of Turbomachinery. ISSN 0889-504X

Dowling, AP and Hynes, TP (2006) Towards a silent aircraft. Aeronautical Journal, 110. pp. 487-494. ISSN 0001-9240

Faszer, AC and Hynes, TP and Blaabjerg, C and Shin, H (2006) Acoustic beamforming and holography measurements of modified boundary layer trailing-edge noise. In: 12th AIAA/CEAS Aeroacoustics Conference (27th AIAA Aeroacoustics Conference), 8-5-2006 to 10-5-2006, Cambridge, Massachusetts, USA pp. 2056-2068..

Garcia Sagrado, A and Hynes, TP and Hodson, HP (2006) Experimental investigation into trailing edge noise sources. In: 12th AIAA/CEAS Aeroacoustics Conference (27th AIAA Aeroacoustics Conference), 8-5-2006 to 10-5-2006, Cambridge, Massachusetts, USA pp. 981-1002..

Gbadebo, SA and Cumpsty, NA and Hynes, TP (2006) Interaction of tip clearance flow and three-dimensional separations in axial compressors. In: ASME Turbo Expo 2006, 8-5-2006 to 11-5-2006, Barcelona, Spain pp. 71-78..

Hall, CA and Crichton, D (2006) Engine design studies for a silent aircraft. In: UNSPECIFIED pp. 1653-1662..

Hall, CA and Hynes, TP (2006) Measurements of intake separation hysteresis in a model fan and nacelle rig. Journal of Propulsion and Power (AIAA), 22. pp. 872-879. ISSN 0748-4658

Hassan, O and Morgan, K and Weatherill, NP and Tucker, PG (2006) Computation of unsteady aerodynamic flows. In: 36th Fluid Dynamics Conference and Exhibit, 5-6-2006 to 8-6-2006, San Francisco, CA, USA.

Janke, E and Haselbach, F and Whitney, C and Kanjirakkad, VP and Thomas, RL and Hodson, HP (2006) Passive shroud cooling concepts for HP turbines: CFD based design approach. In: ASME Turbo Expo 2006, Power for Land, Sea and Air, 8-5-2006 to 11-5-2006, Barcelona, Spain pp. 1065-1074..

Kanjirakkad, VP and Thomas, RL and Hodson, HP and Janke, E and Haselbach, F and Whitney, C (2006) Passive shroud cooling concepts for HP turbines: experimental investigations. In: ASME Turbo Expo 2006, 8-5-2006 to 11-5-2006, Barcelona, Spain.

Karabasov, SA (2006) Application of a hybrid approach for far-field sound prediction from high-speed helicopter blades. Mathematical Modelling Journal, 18. pp. 3-23.

Karabasov, SA and Goloviznin, VM and Kozubskaya, TK and Abalakin, IA (2006) A new high-resolution balance-characteristic method for aeroacoustics. In: 12th AIAA/CEAS Aeroacoustics Conference, 8-5-2006 to 10-5-2006, Cambridge, MA, USA pp. 190-204..

Karabasov, SA and Hynes, TP (2006) Adjoint linearised Euler solver in the frequency domain for jet noise modelling. In: UNSPECIFIED pp. 3550-3563..

Karabasov, SA and Hynes, TP (2006) An adjoint linearised Euler solver in the frequency domain for jet noise modelling. In: 12th AIAA/CEAS Aeroacoustics Conference (27th AIAA Aeroacoustics Conference), 8-5-2006 to 10-5-2006, Cambridge, Massachusetts, USA pp. 3550-3563..

Karabasov, SA and Hynes, TP (2006) A method for solving compressible flow equations in an unsteady free stream. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220. pp. 185-202. ISSN 0954-4062

Kim, T and Hodson, HP and Lu, TJ (2006) On the prediction of pressure drop across banks of inclined cylinders. International Journal of Heat and Fluid Flow, 27. pp. 311-318. ISSN 0142-727X

Liu, Y and Tucker, PG and Lo Iacono, G (2006) Comparison of zonal RANS and LES for a non-isothermal ribbed channel flow. International Journal of Heat and Fluid Flow, 27. pp. 391-401. ISSN 0142-727X

Mason, SA and Miller, RJ (2006) An investigation into the performance of ejectors driven by sinusoidally unsteady jets. In: 44th AIAA Aerospace Sciences Meeting and Exhibit, 9-1-2006 to 12-1-2006, Reno, Nevada.

Mason, SA and Miller, RJ (2006) The performance of ejectors driven by sinusoidally unsteady jets. Collection of Technical Papers - 44th AIAA Aerospace Sciences Meeting, 16. pp. 12245-12255.

Molinari, M and Dawes, WN (2006) Review of evolution of compressor design process and future perspectives. P I MECH ENG C-J MEC, 220. pp. 761-771. ISSN 0954-4062

Molinari, M and Dawes, WN (2006) A review of the evolution of the compressor design process and future perspectives. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science incorporating the Journal of mechanical engineering science, 220. pp. 761-772. ISSN 0954-4062

Molinari, M and Jarrett, JP and Clarkson, PJ and Dawes, WN (2006) Characterizing the design space in multi-objective axial compressor blade optimization. In: 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1-5-2006 to 4-5-2006, Newport, RI, US pp. 3843-3856..

Newton, PJ and Lock, GD and Krishnababu, SK and Hodson, HP and Dawes, WN and Hannis, J and Whitney, C (2006) Heat transfer and aerodynamics of turbine blade tips in a linear cascade. Transactions of the ASME, Journal of Turbomachinery, 128. pp. 300-309. ISSN 0889-504X

Ong, J and Miller, RJ and Uchida, S (2006) The effect of coolant injection on the endwall flow of a high pressure turbine. In: ASME Turbo Exposition, -5-2006 to --, Barcelona, Spain.

Ong, JHP and Miller, RJ and Uchida, S (2006) The effect of coolant injection on the endwall flow of a high pressure turbine. In: UNSPECIFIED pp. 915-924..

Opoka, MM and Thomas, RL and Hodson, HP (2006) Boundary layer transition on the high lift T106A LP Turbine blade with an oscillating downstream pressure field. In: ASME Turbo Expo, 8-5-2006 to 11-5-2006, Barcelona, Spain.

Opoka, MM and Thomas, RL and Hodson, HP (2006) Boundary layer transition on the high lift T106A LP turbine blade with an oscillating downstream pressure field. In: UNSPECIFIED pp. 1899-1909..

Pullan, G (2006) Secondary flows and loss caused by blade row interaction in a turbine stage. Transactions of the ASME, Journal of Turbomachinery, 128. pp. 484-491. ISSN 0889-504X

Pullan, G (2006) Secondary flows caused by blade row interaction in a turbine stage. Transactions of the ASME Journal of Turbomachinery, 128. 484-. ISSN 0889-504X

Pullan, G and Denton, JD and Curtis, EM (2006) Improving the performance of a turbine with low aspect ratio stators by aft-loading. ASME Transactions, Journal of Turbomachinery, 128. pp. 492-499. ISSN 0889-504X

Pullan, G and Harvey, NW (2006) The influence of sweep on axial flow turbine aerodynamics at mid-span. In: UNSPECIFIED pp. 925-935..

Reid, K and Denton, JD and Pullan, G and Curtis, EM and Longley, JP (2006) Reducing the performance penalty due to turbine inter-platform gaps. In: 2006 Proceedings of ASME Turbo Expo: Power for Land, Sea, and Air, 8-5-2006 to 11-5-2006, Barcelona, Spain pp. 799-808..

Reid, K and Denton, JD and Pullan, G and Curtis, EM and Longley, JP (2006) The effect of stator-rotor hub sealing flow in the mainstream aerodynamics of a turbine. In: ASME IGTI Turbo Expo, -5-2006 to --, Barcelona, Spain.

Reid, K and Denton, JD and Pullan, G and Curtis, EM and Longley, JP (2006) The effect of stator-rotor hub sealing flow on the mainstream aerodynamics of a turbine. In: ASME Turbo Expo — Land, Sea and Air, Gas Turbine Conference, 8-5-2006 to 11-5-2006, Barcelona, Spain pp. 789-798..

Richardson, GA and Dawes, WN and Savill, AM (2006) CFD analysis of hot gas ingestion mechanisms for the vertical descent phase of a harrier aircraft. In: UNSPECIFIED pp. 165-174..

Richardson, GA and Dawes, WN and Savill, AM (2006) CFD analysis of hot gas ingestion mechanisms for the vertical descent phase of a Harrier aircraft. In: ASME Gas Turbine Expo 2006: Power for Land, Sea and Air, 8-5-2006 to 11-5-2006, Barcelona, Spain.

Rosic, B and Denton, JD (2006) The control of shroud leakage loss by reducing circumferential mixing. In: ASME Turbo Expo - Power for Land, Sea and Air, 8-5-2006 to 11-5-2006, Barcelona, Spain.

Rosic, B and Denton, JD and Pullan, G (2006) The importance of shroud leakage modeling in multistage turbine flow calculations. Transactions of ASME, Journal of Turbomachinery, 128. pp. 699-707. ISSN 0889-504X

Scarinci, T and Freeman, C and Day, IJ (2006) Passive control of combustion instability in a low emissions aeroderivative gas turbine. Transactions of the ASME Journal of Engineering for Gas Turbines and Power.

Secundov, AN and Birch, SF and Tucker, PG (2006) Numerical modelling of propulsive jets and their noise. In: 36th Fluid Dynamics Conference and Exhibit, 5-6-2006 to 8-6-2006, San Francisco, CA, USA.

Shin, HC and Hall, CA and Crichton, D (2006) Auralisation of turbofan engine noise components. In: Conference Proceedings of the12th AIAA/CEAS Aeroacoustics, 8-5-2006 to 10-5-2006, Cambridge, MA, US pp. 2841-2854..

Torre, D and De La Rosa Blanco, E and Vázquez, R and Hodson, HP (2006) A new alternative for reduction of secondary flows in low pressure turbines. Proceedings of the ASME Turbo Expo, 6 PART. pp. 883-892.

Torre, D and Vazquez, R and de la Rosa Blanco, E and Hodson, H (2006) A new alternative for reduction of secondary flows in low pressure turbines. In: ASME Turbo Expo 2006, 8-5-2006 to 11-5-2006, Barcelona, Spain.

Tucker, PG (2006) Non-linear and implicit LES: applications and connections. In: ICFD Workshop - Classical versus Implicit LES, 14-9-2006 to --, Oxford University.

Tucker, PG (2006) Rolls-Royce computational fluid dynamics. Technical Report. Unknown.

Tucker, PG (2006) Turbulence modelling for problem aerospace flows. International Journal for Numerical Methods in Fluids, 51. pp. 261-283. ISSN 0271-2091

Tucker, PG and Coupland, J and Eastwood, S and Liu, Y and Jefferson Loveday, RJ and Hassan, O (2006) Contrasting code performances for computational aeroacoustics in jets. In: 12th AIAA/CEAS Aeroacoustics Conference, 8-5-2006 to 12-5-2006, Cambridge, MA, USA.

Tucker, PG and Coupland, J and Eastwood, S and Xia, H and Liu, Y and Jefferson-Loveday, RJ and Hassan, O (2006) Contrasting code performances for computational aeroacoustics of jets. Collection of Technical Papers - 12th AIAA/CEAS Aeroacoustics Conference, 6. pp. 3530-3549.

Tucker, PG and Liu, Y and Kerr, RM (2006) Plane jet simulations using LES with linear and nonlinear models. In: 44th AIAA Aerospace Sciences Meeting and Exhibit, 10-1-2006 to 13-1-2006, Reno, Nevada, USA.

Vera, M and Hodson, HP and Vazquez Diaz, R (2006) The effect of Mach number on LP turbine blade wake interaction. In: Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines. Springer, pp. 203-216. ISBN 1402042671,9781402042676

Wheeler, AP and Miller, RJ and Hodson, HP (2006) The effect of wake induced coherent structures on compressor boundary layers. In: ASME Turbo Expo - Power for Land Sea and Air, 8-5-2006 to 11-5-2006, Barcelona, Spain.

Wheeler, APS and Miller, RJ and Hodson, HP (2006) The effect of wake induced structures on compressor boundary layers. In: ASME Turbo Expo, 8-5-2006 to 11-5-2006, Barcelona, Spain.

Wheeler, APS and Miller, RJ and Hodson, HP (2006) The effect of wake induced structures on compressor boundary-layers. In: UNSPECIFIED pp. 1875-1885..

Wissink, JG and Rodi, W and Hodson, HP (2006) The influence of disturbances carried by periodically incoming wakes on the separating flow around a turbine blade. International Journal of Heat and Fluid Flow, 27. pp. 721-729. ISSN 0142-727X

Zhang, XF and Hodson, HP (2006) Parametric study of surface roughness and wake unsteadiness on a flat plate with large adverse pressure gradient. In: Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines. Springer. ISBN 1402042671,9781402042676

Zhang, XF and Hodson, HP (2006) Parametric study of surface roughness and wake unsteadiness on a flat plate with large pressure gradient. In: UNSPECIFIED pp. 331-344..

de la Rosa Blanco, E and Hodson, HP and Vazquez, R (2006) Effect of the leakage flows and the upstream platform geometry on the endwall flows of a turbine cascade. In: ASME Turbo Expo 2006, 8-5-2006 to 11-5-2006, Barcelona, Spain pp. 733-744..

2005

Arnold, A and Nithiarasu, P and Tucker, PG (2005) CFD modelling of micro-osmotic devices. In: 13th International Conference on Finite Elements for Flow Problem, 4-4-2005 to 6-4-2005, Swansea, Wales -..

Bell, CP and Jarrett, JP and Clarkson, PJ and Dawes, WN (2005) Improving the conceptual design of turbine rotor blade cooling systems. In: The 15th International Conference on Engineering Design (ICED'05), 15-8-2005 to 18-8-2005, Melbourne, Australia pp. 421-422..

Ciardi, M and Sagaut, P and Dawes, WN (2005) A dynamic finite volume scheme for large-eddy simulation on unstructured grids. Journal of Computational Physics, 210. pp. 632-655. ISSN 0021-9991

Ciardi, M and Sagaut, P and Klein, M and Dawes, WN (2005) A dynamic finite volume scheme for large-eddy simulation on unstructured grids. Journal of Computational Physics, 210. pp. 632-655. ISSN 0021-9991

Dawes, WN (2005) Application of VR-based flow sculpting to aero-engine design. In: 17th ISABE: International Symposium on Airbreathing Engines, -9-2005 to --, Munich, Germany.

Dawes, WN (2005) Building blocks towards VR-based flow sculpting. In: 43rd AIAA Aerospace Sciences Meeting and Exhibit, 10-1-2005 to 13-1-2005, Reno, NV, US -..

Dawes, WN (2005) Building blocks towards VR-based flow sculpting. In: UNSPECIFIED pp. 545-555..

Dawes, WN (2005) Rapid prototyping design optimisation using flow sculpting. In: ASME Turbo Expo 2005: Power for Land, Sea and Air, -6-2005 to --, Reno, NV, US pp. 991-1000..

Dawes, WN (2005) Rapid prototyping design optimisation using flow sculpting. ASME Transactions, Journal of Turbomachinery. ISSN 0889-504X

Dowling, AP and Morgans, AS (2005) Feedback control of combustion oscillations. Annual Review of Fluid Mechanics, 37. pp. 151-182. ISSN 0066-4189

Fuller, AJ and Kim, T and Hodson, HP and Lu, TJ (2005) Measurement and interpretation of the heat transfer coefficients of metal foams. Proceedings of the Institute of Mechanical Engineers C: Journal of Mechanical Engineering Science, 219. pp. 183-192. ISSN 0954-4062

Gbadebo, SA and Cumpsty, NA and Hynes, TP (2005) Three-dimensional separations in axial compressors. Transactions of the ASME, Journal of Turbomachinery, 127. pp. 331-339. ISSN 0889-504X

Hall, CA (2005) Propulsion systems for a silent aircraft. In: Royal Aeronautical Society Conference, Aerospace 2005: Meeting the Challenges, -4-2005 to --, London.

Hall, CA and Crichton, D (2005) Engine and installation configurations for a silent aircraft. In: 17th International Symposium on Airbreathing Engines, -9-2005 to --, Munich, Germany.

Hall, CA and Hynes, TP (2005) Nacelle interaction with natural wind before take-off. Journal of Propulsion and Power (AIAA), 21. pp. 784-791. ISSN 0748-4658

Hodson, HP and Howell, RJ (2005) Bladerow interactions, transition, and high-lift aerofoils in low-pressure turbines. Annual Review of Fluid Mechanics, 37. pp. 71-98. ISSN 0066-4189

Hodson, HP and Howell, RJ (2005) The role of transition in high lift low pressure turbines for aeroengines. Progress in Aerospace Science, 41. pp. 419-454. ISSN 0376-0421

Horlock, JH and Denton, JD (2005) A review of some early design practice using computational fluid dynamics and a current perspective. Transactions of the ASME, Journal of Turbomachinery, 127. pp. 5-13. ISSN 0889-504X

Howell, RJ and Hodson, HP (2005) The role of transition in high lift low pressure turbines. In: VKI Lecture Series: Effects of Aerodynamic Unsteadiness in Axial Turbomachines, 25-4-2005 to 29-4-2005, Rhode-Saint-Genese, Belgium.

Jouvray, A and Tucker, PG (2005) Computation of the flow in a ventilated room using non-linear RANS, LES and hybrid RANS/LES. International Journal for Numerical Methods in Fluids, 48. pp. 99-106. ISSN 0271-2091

Karabasov, SA and Hynes, TP (2005) An efficient frequency-domain algorithm for wave scattering problems with application to jet noise. In: 11th AIAA/CEAS Aeroacoustics Conference, 23-5-2005 to 25-5-2005, Monterey, CA, USA.

Karabasov, SA and Hynes, TP (2005) An efficient frequency-domain algorithm for wave scattering problems with application to jet noise. Collection of Technical Papers - 11th AIAA/CEAS Aeroacoustics Conference, 1. pp. 347-358.

Kerr, RM and Tucker, PG (2005) Mixed nonlinear LES for a plane channel. In: 43rd AIAA Aerospace Sciences Meeting and Exhibit, 10-1-2005 to 13-1-2005, Reno, Nevada, USA.

Kim, T and Hodson, HP and Lu, TJ (2005) Contribution of vortex structures and flow separation to local and overall pressure and heat transfer characteristics in an ultralightweight lattice material. International Journal of Heat and Mass Transfer, 48. pp. 4243-4264. ISSN 0017-9310

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM (2005) Multiobjective optimisation of turbomachinery blades using tabu search. In: Evolutionary Multi-Criterion Optimization. Lecture Notes in Computer Science, 3410 . Springer, Berlin/Heidelberg, pp. 897-910. ISBN 9783540249832

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM (2005) Multi-criteria optimisation of turbomachinery blades: investigating the trade-off surface. In: 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 10-7-2005 to 13-7-2005, Tucson, AZ -..

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM (2005) Multi-objective aerodynamic design optimisation for axial compressors. ERCOFTAC Bulletin (theme - Design Optimisation). pp. 21-24.

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM (2005) Multi-objective optimisation of turbomachinery blades using Tabu Search. In: Proceedings of the 3rd International Conference on Evolutionary Multi-Criterion Optimization, 9-3-2005 to 11-3-2005, Guanajuato, Mexico pp. 897-910..

Krishnababu, SK and Newton, PJ and Dawes, WN and Lock, G and Hodson, HP (2005) An experimental and numerical investigation of the tip leakage flow and heat transfer using a rotor tip leakage model. In: 6th European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics, 7-3-2005 to 11-3-2005, Lille, Belgium.

Liu, Y and Tucker, PG (2005) Comparison of zonal RANS and LES for a non-isothermal ribbed channel flow. In: 9th UK Heat Transfer Conference, 5-9-2005 to 7-9-2005, Manchester, UK -..

Liu, Y and Tucker, PG and Chung, YM (2005) Application of zonal LES/ILES approaches to an unsteady complex geometry flow. In: 13th International Conference on Finite Elements for Flow Problem, 4-4-2005 to 6-4-2005, Swansea, Wales -..

Liu, Y and Tucker, PG and Chung, YM and Kerr, RM (2005) Plane jet simulations using large-eddy simulation with linear and non-linear models. In: 13th International Conference on Finite Elements for Flow Problem, 4-4-2005 to 6-4-2005, Swansea, Wales -..

Lo Iacono, G and Tucker, PG (2005) Numerical study of particle motion in turbulent ribbed duct flow. In: Progress in Turbulence. Springer Proceedings in Physics, 101 . Springer Verlag, -.

Lo Iacono, G and Tucker, PG and Reynolds, AM (2005) Predictions for particle deposition from LES of ribbed channel flow. International Journal of Heat and Fluid Flow, 26. pp. 558-568. ISSN 0142-727X

Morgans, AS and Dowling, AP (2005) Model-based control of a Rijke tube combustion instability. In: 11th AIAA/CEAS Aeroacoustics Conference, 23-5-2005 to 25-5-2005, Monterey, CA, US -..

Morgans, AS and Dowling, AP (2005) Model-based control of combustion instabilities. In: ASME Turbo Expo 2005, -6-2005 to --, Reno, NV, US pp. 773-784..

Morgans, AS and Karabasov, SA and Dowling, AP and Hynes, TP (2005) Transonic helicopter noise. AIAA Journal, 43. pp. 1512-1524. ISSN 0001-1452

Newton, PJ and Krishnababu, SK and Lock, G and Hodson, HP and Dawes, WN and Hannis, J and Whitney, C (2005) Heat transfer and aerodynamics of turbine blade tips in a linear cascade. Transactions of the ASME Journal of Turbomachinery, 128. pp. 300-309. ISSN 0889-504X

Newton, PJ and Krishnababu, SK and Lock, GD and Hodson, HP and Dawes, WN and Hannis, J and Whitney, C (2005) Heat transfer and aerodynamics of turbine blade tips in a linear cascade. In: UNSPECIFIED pp. 867-877..

Opoka, MM and Hodson, HP (2005) An experimental investigation of the unsteady transition process on the high lift T106A turbine blade. In: XVII ISABE, 4-9-2005 to 9-9-2005, Munich, Germany -..

Parikesit, GO and Markesteijn, AP and Kutchoukov, VG and Piciu, O and Bossche, A and Westerweel, J and Garini, Y and Young, IT (2005) Electroosmotic flow analysis of a branched U-turn nanofluidic device. Lab Chip, 5. pp. 1067-1074. ISSN 1473-0197

Payne, SJ and Ainsworth, RW and Miller, RJ and Moss, RW and Harvey, NW (2005) Unsteady loss in a high pressure turbine stage: interaction effects. International Journal of Heat and Fluid Flow, 26. pp. 695-708. ISSN 0142-727X

Pullan, G and Denton, J and Curtis, E (2005) Improving the performance of a turbine with low aspect ratio stators by AFT-loading. In: UNSPECIFIED pp. 579-589..

Reid, K and Denton, J and Pullan, G and Curtis, E and Longley, J (2005) The interaction of turbine inter-platform leakage flow with the mainstream flow. In: UNSPECIFIED pp. 429-437..

Richardson, GA and Dawes, WN and Savill, AM (2005) Hot gas ingestion modelling for the vertical descent phase of a Harrier. In: 17th AIAA CFD Conference, 6-6-2005 to 9-6-2005, Toronto, Canada pp. 1909-1921..

Rosic, B and Denton, JD and Pullan, G (2005) The importance of shroud leakage modelling in multistage turbine flow calculations. In: UNSPECIFIED pp. 561-570..

Stieger, RD and Hodson, HP (2005) The unsteady development of a turbulent wake through a downstream low-pressure turbine blade passage. Transactions of the ASME Journal of Turbomachinery, 127. pp. 388-394. ISSN 0889-504X

Thorpe, SJ and Miller, RJ and Yoshino, S and Ainsworth, RW and Harvey, NW (2005) The effect of work processes on the casing heat transfer of a transonic turbine. In: ASME Turbo Expo - Power for Land, Sea and Air, 6-6-2005 to 9-6-2005, Reno, Nevada.

Thorpe, SJ and Miller, RJ and Yoshino, S and Ainsworth, RW and Harvey, NW (2005) The effect of work processes on the casing heat transfer of a transonic turbine. Proceedings of the ASME Turbo Expo, 3 PART. pp. 443-451.

Tucker, PG and Eastwood, S and Liu, Y and Jefferson Loveday, R (2005) Computational modeling of jets with co-flow. In: 11th AIAA/CEAS Aeroacoustics Conference, 23-5-2005 to 27-5-2005, Monterey, CA, USA.

Tucker, PG and Kerr, RM (2005) Hybrid ILES-RANS and non-linear LES for industrial flows. In: LES UK Colloquium, 3-3-2005 to 4-3-2005, Imperial College, London -..

Tucker, PG and Liu, Y (2005) Application of zonal LES/ILES approaches to an unsteady complex geometry flow. In: Engineering Turbulence Modelling and Experiments. Elsevier Science, pp. 339-348.

Tucker, PG and Liu, Y (2005) Contrasting CFD for electronic systems modelling with that for aerospace. In: 6th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems (EuroSimE 2005), 18-4-2005 to 20-4-2005, Berlin, Germany pp. 618-625..

Tucker, PG and Liu, Y (2005) Contrasting a novel temporally orientated Hamilton-Jacobi equation based ILES method with other approaches for a complex geometry flow. International Journal for Numerical Methods in Fluids, 48. pp. 1241-1257. ISSN 0271-2091

Tucker, PG and Liu, Y and Coupland, J and Kerr, RM (2005) On eddy resolving approaches for jet acoustics. In: Euromech Colloquium 467: Turbulent Flow and Noise Generation, 18-7-2005 to 20-7-2005, Marseille, France 339-..

Tucker, PG and Liu, Y and Nithiarasu, P and Arnold, A (2005) CFD Modelling of electronics heat transfer. In: 13th International Conference on Finite Elements for Flow Problem, 22-2-2005 to 23-2-2005, Reading, UK -..

Tucker, PG and Rumsey, CL and Spalart, PR and Bartels, RE and Biedron, RT (2005) Computations of wall distances based on differential equations. In: 13th International Conference on Finite Elements for Flow Problem, 4-4-2005 to 6-4-2005, Swansea, Wales -..

Tucker, PG and Rumsey, CL and Spalart, PR and Bartels, RE and Biedron, RT (2005) Computations of wall distances based on differential equations. AIAA Journal, 43. pp. 539-549. ISSN 0001-1452

Vera, M and Zhang, XF and Hodson, HP and Harvey, NW (2005) Separation control on an aft-loaded ultra-high-lift LP turbine blade at low Reynolds numbers: high-speed validation. In: ASME Turbo Expo 2005, 6-6-2005 to 9-6-2005, Reno, Nevada, USA pp. 725-734..

Wissink, JG and Rodi, W and Hodson, HP (2005) The influence of disturbances carried by periodically oncoming wakes on boundary layer separation along the suction side of a turbine blade. In: Fourth International Symposium on Turbulence and Shear Flow Phenomena, 27-6-2005 to 29-6-2005, Williamsburg, VA, USA.

Zhang, XF and Hodson, HP (2005) The combined effects of surface trips and unsteady wakes on the boundary layer development of an ultra-high lift LP turbine blade. Transactions of the ASME Journal of Turbomachinery, 127. pp. 479-488. ISSN 0889-504X

Zhang, XF and Hodson, HP and Harvey, NW (2005) Unsteady boundary layer studies on ultra-high lift low pressure turbine blades. Proceedings of the Institute of Mechanical Engineers Part A: Journal of Power and Energy, 219. pp. 451-460. ISSN 0957-6509

Zhang, XF and Vera, M and Hodson, HP and Harvey, NW (2005) Separation and transition control on an aft-loaded ultra-high-lift LP turbine blade at low Reynolds numbers: low-speed investigation. Transactions of the ASME Journal of Turbomachinery, 128. pp. 517-527. ISSN 0889-504X

Zhao, CY and Lu, TJ and Hodson, HP (2005) Natural convection in metal foams with open cells. International Journal of Heat and Mass Transfer, 48. pp. 2452-2463. ISSN 0017-9310

Zhao, CY and Lu, TJ and Hodson, HP (2005) Natural convection in metal foams with open cells. International Journal of Heat and Mass Transfer, 48. pp. 2452-2463. ISSN 0017-9310

Zhong, B and Tucker, PG (2005) LES and hybrid LES/RANS simulations for conjugate heat transfer. In: 43rd AIAA Aerospace Sciences Meeting and Exhibit, 10-1-2005 to 13-1-2005, Reno, Nevada, USA.

Zhong, B and Tucker, PG (2005) LES and hybrid LES/RANS simulations for conjugate heat transfer over a matrix of cubes. 43rd AIAA Aerospace Sciences Meeting and Exhibit - Meeting Papers. pp. 7207-7220.

de la Rosa Blanco, E and Hodson, HP and Vazquez, R (2005) Effect of upstream platform geometry on the endwall flows of a turbine cascade. In: ASME Turbo Expo 2005, -6-2005 to --, Reno, NV, USA pp. 735-746..

2004

Appukuttan, A and Miller, RJ and Hodson, HP (2004) Probe measurement error in shear flows. In: The 17th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines, 9-9-2004 to 10-9-2004, Stockholm, Sweden.

Atkins, NR and Miller, RJ and Ainsworth, RW (2004) The development of aerodynamic performance measurements in a transient test facility. In: ASME Turbo Expo - Power for Land, Sea and Air, 14-6-2004 to 17-6-2004, Vienna, Austria.

Brear, MJ and Hodson, HP (2004) The effect of wake passing on a flow separation in a low-pressure rurbine cascade. J FLUID ENG-T ASME, 126. pp. 250-256. ISSN 0098-2202

Cant, RS and Dawes, WN and Savill, AM (2004) Advanced CFD and modelling of accidental explosions. Annual Review of Fluid Mechanics, 36. pp. 97-119. ISSN 0066-4189

Chaluvadi, VSP and Kalfas, AI and Hodson, HP (2004) Vortex transport and blade interactions in high pressure turbines. Transactions of the ASME Journal of Turbomachinery, 126. pp. 395-405. ISSN 0889-504X

Chung, YM and Tucker, PG (2004) Assessment of periodic flow assumption for unsteady heat transfer in grooved channels. Transactions of ASME, Journal of Heat Transfer, 126. pp. 1044-1047. ISSN 0022-1481

Chung, YM and Tucker, PG (2004) Numerical studies of heat transfer enhancements in laminar separated flows. International Journal of Heat and Fluid Flow, 25. pp. 22-31. ISSN 0142-727X

Ciardi, M and Dawes, WN (2004) Large eddy and detached eddy simulations for broadband noise prediction in complex geometries. In: UNSPECIFIED UNSPECIFIED, pp. 489-498.

Ciardi, M and Dawes, WN (2004) Large eddy and detached eddy simulations for broadband noise predictions in complex geometries. In: Direct and Large-Eddy Simulation V. ERCOFTAC Series, 9 . Springer, -. ISBN 9781402020322

Crichton, D and Tan, D and Hall, CA (2004) Required jet area for a silent aircraft at take-off. In: 8th ASC-CEAS Workshop, 8-11-2004 to 11-11-2004, Budapest, Hungary.

Dowling, AP and Hynes, TP (2004) Sound generation by turbulence. European Journal of Mechanics, Series B: Fluids, 23. pp. 491-500. ISSN 0997-7546

Gbadebo, SA and Cumpsty, NA and Hynes, TP (2004) Three-dimensional separations in axial compressors. In: ASME Turbo Expo, Power for Land, Sea and Air, 14-7-2004 to 17-7-2004, Vienna, Austria pp. 457-470..

Gbadebo, SA and Hynes, TP and Cumpsty, NA (2004) Influence of surface roughness on three-dimensional separation in axial compressors. In: Proceedings of the ASME Turbo Expo, -6-2004 to --, Vienna, Austria pp. 471-482..

Gbadebo, SA and Hynes, TP and Cumpsty, NA (2004) Influence of surface roughness on three-dimensional separation in axial compressors. Transactions of the ASME, Journal of Turbomachinery, 126. pp. 455-463. ISSN 0889-504X

Hall, CA (2004) Engine configurations for the silent aircraft. In: 148th Meeting of the Acoustical Society of America, 15-11-2004 to 19-11-2004, San Diego, CA, US.

Hall, CA (2004) Engine configurations for the silent aircraft. Journal of the Acoustical Society of America, 116. p.2538-. ISSN 0001-4966

Hall, CA and Crichton, D and Freuler, P and Agarwal, A (2004) Integration of the silent aircraft propulsion system. In: 8th ASC-CEAS, -11-2004 to --, Budapest, Hungary.

Hall, CA and Humphreys, ND (2004) Intake performance during rolling take-off in natural crosswind. In: 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 11-7-2004 to 14-7-2004, Fort Lauderdale, FL, US.

Jarrett, JP and Dawes, WN and Clarkson, PJ (2004) An approach to integrated multi-disciplinary turbomachinery design. In: ASME Turbo Expo 2004: Power for Land, Sea and Air, 14-6-2004 to 17-6-2004, Vienna, Austria pp. 1651-1660..

Jouvray, A and Tucker, PG (2004) Computation of the flow in a ventilated room using non-linear RANS, LES and hybrid RANS/LES. In: ICFD Conference on Numerical Methods for Fluid Dynamics, 29-3-2004 to 1-4-2004, Oxford, UK.

Karabasov, SA (2004) A method for solving compressible flow equations in unsteady free stream. In: 10th AIAA/CEAS Aeroacoustics Conference, 10-5-2004 to 12-5-2004, Manchester, UK pp. 1091-1106..

Karabasov, SA (2004) A perturbation approach for compressible flow problems. In: Fifth International Conference on Mathematical Problems in Engineering and Aerospace Sciences, 2-6-2004 to 4-6-2004, Timisoara, Romania pp. 343-350..

Karabasov, SA and Goloviznin, VM (2004) Digital transport approach for hyperbolic-type problems. In: Hyperbolic Problems: Theory, Numerics and Applications. Yokohama, Osaka, Japan, pp. 79-86. ISBN 4946552219

Kerr, RM and Tucker, PG (2004) Mixed nonlinear LES for novel airfoils. In: 57th Annual Meeting of the Division of Fluid Dynamics, 21-11-2004 to 23-11-2004, Seattle, WA, USA.

Kerr, RM and Tucker, PG (2004) A new mixed nonlinear LES model for boundary layers. In: Mechanics of the 21st Century : proceedings of the 21st International Congress of Theoretical and Applied Mechanics, -8-2004 to -- -..

Kim, T and Hodson, HP and Lu, TJ (2004) Pressure loss and heat transfer mechanisms in a lattice-frame structured heat exchanger. In: UNSPECIFIED pp. 1321-1336..

Kim, T and Hodson, HP and Lu, TJ (2004) Fluid-flow and endwall heat-transfer characteristics of an ultralight lattice-frame material. International Journal of Heat and Mass Transfer, 47. pp. 1129-1140. ISSN 0017-9310

Kim, T and Hodson, HP and Lu, TJ (2004) Pressure loss and heat transfer mechanisms in a lattice-frame. Proceedings of the Institute of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 218. pp. 1321-1336. ISSN 0954-4062

Kim, T and Zhao, CY and Lu, TJ and Hodson, HP (2004) Convective heat dissipation with lattice-frame materials. Mechanics of Materials, 36. pp. 767-780. ISSN 0167-6636

Kim, T and Zhao, CY and Lu, TJ and Hodson, HP (2004) Convective heat dissipation with lattice-frame materials. Mechanics of Materials, 36. pp. 767-780. ISSN 0167-6636

Liu, Y and Tucker, PG (2004) Zonal LES and URANS model variants with application to a complex electronic system. In: 10th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC 2004), 29-9-2004 to 1-10-2004, Sophia Antipolis, France pp. 256-264..

Lo Iacono, G and Tucker, PG (2004) LES computation of particle transport in rib roughened passages. In: CHT-04, Advances in Computational Heat Transfer III, -- to --.

Miller, RJ and Ainsworth, RW and Moss, RW and Harvey, NW (2004) The effect of an upstream turbine on a low-aspect ratio vane. Proceedings of the ASME Turbo Expo 2004, 5 B. pp. 1417-1428.

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2004) The effect of an upstream turbine on a low-aspect ratio vane. In: ASME Turbo Expo - Power for Land, Sea and Air, 14-6-2004 to 17-6-2004, Vienna, Austria.

Morgans, AS and Dowling, AP (2004) Low order modeling for transonic helicopter noise. AIAA Journal, 42. pp. 2416-2428. ISSN 0001-1452

Ottavy, X and Vilmin, S and Opoka, M and Hodson, HP and Gallimore, SJ (2004) The effects of wake-passing unsteadiness over a highly-loaded compressor-like flat plate. Transactions of the ASME Journal of Turbomachinery, 126. pp. 13-23. ISSN 0889-504X

Preece, AK and Tucker, PG and Liu, Y (2004) Cubic and EASM modelling of synthetic jets. In: Langley Research Center Workshop: CFD Validation of Synthetic Jets and Turbulent Separation Control, 29-3-2004 to 31-3-2004, Williamsburg, Virginia, USA 1.6.1-1.6.3..

Pullan, G (2004) Secondary flows and loss caused by blade row interaction in a turbine stage. Proceedings of the ASME Turbo Expo 2004, 5 B. pp. 1247-1257.

Scarinci, T and Freeman, C and Day, I (2004) Passive control of combustion instability in a low emissions aeroderivative gas turbine. Proceedings of the ASME Turbo Expo 2004, 1. pp. 487-499.

Stieger, R and Hodson, HP (2004) The transition mechanism of highly-loaded LP turbine blades. ASME Journal of Turbomachinery, 126. pp. 536-543. ISSN 0889-504X

Stieger, R and Hollis, D and Hodson, HP (2004) Unsteady surface pressure due to wake induced transition in a laminar separation bubble on an LP turbine cascade. Transactions of the ASME Journal of Turbomachinery, 126. pp. 544-550. ISSN 0889-504X

Stieger, RD and Hodson, HP (2004) The unsteady development of a turbulent wake through a downstream low-pressure turbine blade passage. Proceedings of the ASME Turbo Expo 2004, 5 A. pp. 121-129.

Tian, J and Kim, T and Lu, TJ and Hodson, HP and Queheillalt, DT and Sypeck, DJ and Wadley, HNG (2004) The effect of topology upon fluid-flow and heat-transfer with cellular copper structures. International Journal of Heat and Mass Transfer, 47. pp. 3171-3186. ISSN 0017-9310

Tian, J and Lu, TJ and Hodson, HP and Queheillalt, DT and Wadley, HNG (2004) Thermal-hydraulic performance of sandwich structures with crossed tube truss core and embedded heat pipes. In: 13th International Heat Pipe Conference, 21-9-2004 to 25-9-2004, Shanghai, China.

Timmerman, BH and Bryanston Cross, PJ and Skeen, AJ and Tucker, PG and Jefferson Loveday, RJ and Dunkley, P and Paduano, J and Guenette Jr, GR (2004) High-speed digital shadowgraphy for high frequency shock tracking in supersonic flows. In: 7th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, -9-2004 to --, Stockholm, Sweden.

Tucker, PG (2004) Hybrid MILES-RANS method for more dissipative solvers and the use of non-linear LES. In: 42nd Aerospace Sciences Meeting and Exhibit, 5-1-2004 to 8-1-2004, Reno, Nevada, USA.

Tucker, PG (2004) Novel MILES computations for jet flows and noise. International Journal of Heat and Fluid Flow, 25. pp. 625-635. ISSN 0142-727X

Tucker, PG and Davidson, L (2004) Zonal k–l based large eddy simulations. Computers & Fluids, 33. pp. 267-287. ISSN 0045-7930

Tucker, PG and Rumsey, CL and Spalart, PR and Bartels, RE and Biedron, RT (2004) Computations of wall distances based on differential equations. In: 34th AIAA Fluid Dynamics Conference and Exhibit, 28-6-2004 to 1-7-2004, Portland, Oregon, USA.

Vera, M and Hodson, HP and Vasquez, R (2004) The effects of a trip wire and unsteadiness on a high-speed highly loaded low-pressure turbine blade. Transactions of the ASME Journal of Turbomachinery, 127. pp. 747-754. ISSN 0889-504X

Vera, M and Hodson, HP and Vazquez, R (2004) The effects of a trip wire and unsteadiness on a high speed highly loaded low-pressure turbine blade. Proceedings of the ASME Turbo Expo 2004, 5 B. pp. 1339-1348.

Vicedo, J and Vilmin, S and Dawes, WN and Savill, AM (2004) Intermittency transport modeling of separated flow transition. Journal of Turbomachinery, 126. pp. 424-431. ISSN 0889-504X

Xu, JY and Lu, TJ and Hodson, HP (2004) Numerical study on effective conductivity due to Thermal dispersion in periodic porous media. In: The ASME - ZSIS International Thermal Science Seminar II, 13-6-2004 to 16-6-2004 pp. 831-842..

Xu, L (2004) Shockwave and noise abatement of transonic fans. In: ASME Turbo Expo 2004 Power for Land, Sea, and Air, -5-2004 to --, Vienna, Austria pp. 1715-1722..

Xu, L and Denton, JD (2004) Aero-acoustics of modern transonic fans. Journal of Thermal Science, 12. pp. 104-113. ISSN 1003-2169

Zhao, CY and Kim, T and Lu, TJ and Hodson, HP (2004) Thermal transport in high porosity cellular metal foams. Journal of Thermophysics and Heat Transfer, 18. pp. 309-317. ISSN 0887-8722

Zhao, CY and Kim, T and Lu, TJ and Hodson, HP (2004) Thermal transport in high porosity cellular metal foams. Journal of Thermophysics and Heat Transfer (AIAA), 18. pp. 309-317. ISSN 0887-8722

Zhao, CY and Lu, TJ and Hodson, HP (2004) Measurements of thermal radiation in ultralight metal foams with open cells. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218. pp. 1297-1308. ISSN 0954-4062

Zhao, CY and Lu, TJ and Hodson, HP (2004) Thermal radiation in ultralight metal foams with open cells. International Journal of Heat and Mass Transfer, 47. pp. 2927-2939. ISSN 0017-9310

Zhao, CY and Lu, TJ and Hodson, HP (2004) Measurements of thermal radiation in ultralight metal foams with open cells. Proceedings of the Institute of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218. pp. 1297-1308. ISSN 0954-4062

Zhao, CY and Lu, TJ and Hodson, HP (2004) Thermal radiation in ultralight metal foams with open cells. International Journal of Heat and Mass Transfer, 47. pp. 2927-2939. ISSN 0017-9310

Zhao, CY and Lu, TJ and Hodson, HP and Jackson, JD (2004) The temperature dependence of effective thermal conductivity of open-celled steel alloy foams. Materials Science and Engineering A, 367. pp. 123-131. ISSN 0921-5093

Zhao, CY and Lu, TJ and Hodson, HP and Jackson, JD (2004) The temperature dependence of effective thermal conductivity of open-celled steel alloy foams. Materials Science and Engineering A, 367. pp. 123-131. ISSN 0921-5093

Zhong, B and Tucker, PG (2004) k-l based hybrid LES/RANS approach and its application to heat transfer simulation. International Journal for Numerical Methods in Fluids, 46. pp. 983-1005. ISSN 0271-2091

2003

Armitage, CA and Cant, RS and Dowling, AP and Hynes, TP (2003) Linearised theory for LPP combustion dynamics. In: ASME Turbo Expo 2003, 16-6-2003 to 19-6-2003, Atlanta, GA, USA pp. 499-508..

Biktasheva, IV and Biktashev, VN and Dawes, WN and Holden, AV and Saumarez, RC and Savill, AM (2003) Dissipation of the excitation front as a mechanism of self-terminating arrhhythmias. International Journal of Bifurcation and Chaos, 13. pp. 3645-3655. ISSN 0218-1274

Blanco, EDL and Hodson, HP and Vazquez, R and Torre, D (2003) Influence of the state of the inlet endwall boundary layer on the interaction between pressure surface separation and endwall flows. In: UNSPECIFIED pp. 433-441..

Brear, MJ and Hodson, HP (2003) The effect of wake passing on a flow separation in a low pressure turbine cascade. In: Proceedings of the ASME FEDSM '03, -7-2003 to --, Honolulu, Hawaii.

Brear, MJ and Hodson, HP (2003) The effect of wake passing on a flow separation in a low pressure turbine cascade. Proceedings of the ASME/JSME Joint Fluids Engineering Conference, 2 B. pp. 1043-1050.

Brear, MJ and Hodson, HP (2003) The response of a laminar separation bubble to 'aircraft engine representative' freestream disturbances. Experiments in Fluids, 35. pp. 610-617. ISSN 0723-4864

Chaluvadi, VSP and Kalfas, AI and Banieghbal, MR and Hodson, HP and Ohyama, H and Watanabe, E (2003) Blade row interaction in a high pressure steam turbine. Transactions of the ASME Journal of Turbomachinery, 125. pp. 14-24. ISSN 0889-504X

Chaluvadi, VSP and Kalfas, AI and Hodson, HP (2003) Vortex Transport and Blade Interactions in High Pressure Turbines. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 6 A. pp. 223-234.

Chaluvadi, VSP and Kalfas, AI and Hodson, HP (2003) Vortex generation and interaction in a steam turbine. In: 5th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, 18-3-2003 to 21-3-2003, Prague, Czech Republic.

Chung, YM and Tucker, PG (2003) Accuracy of higher-order finite difference schemes on non-uniform grids. AIAA Journal, 41. pp. 1609-1611. ISSN 0001-1452

Chung, YM and Tucker, PG (2003) Large-eddy simulation of an electronic system flow. In: 3rd International Symposium on Turbulence and Shear Flow Phenomena, 25-6-2003 to 27-6-2003, Sendai, Japan -..

Chung, YM and Tucker, PG and Roychowdhury, D (2003) Unsteady laminar flow and convective heat transfer in a sharp 180° bend. International Journal of Heat and Fluid Flow, 24. pp. 67-76. ISSN 0142-727X

Ciardi, M and Dawes, WN (2003) Development of a large eddy and detached eddy simulation capability. In: 33rd AIAA Fluid Dynamics Conference and Exhibit, 23-6-2003 to 26-6-2003, Orlando, FL, US.

Dawes, WN and Cant, RS and Savill, AM (2003) Achieving a balance between computational geometry, mesh generation, flow solving and modelling: the key to making CFD useful. Computational Fluid Dynamics Journal, 12. pp. 354-366. ISSN 0918-6654

Dawes, WN and Kellar, WP and Harvey, SA and Dhanasekaran, PC and Savill, AM and Cant, RS (2003) Managing the geometry is limiting the ability of CFD to manage the flow. In: 33rd AIAA Fluid Dynamics Conference and Exhibit, 23-6-2003 to 26-6-2003, Orlando, Florida, U.S.A..

Dawes, WN and Kellar, WP and Harvey, SA and Dhanasekaran, PC and Savill, AM and Cant, RS (2003) Managing the geometry is Limiting the ability of CFD to manage the flow. In: 33rd AIAA Fluid Dynamics Conference and Exhibit, 23-6-2003 to 26-6-2003, Orlando, Florida, USA.

Ferrechia, A and Dawes, WN and Dhanasekeran, PC (2003) Compressor rotor wakes and tone noise study. In: 9th AIAA/CEAS Aeroacoustics Conference, 12-5-2003 to 14-5-2003, Hilton Head, SC, US AIAA 2003-33328..

Goloviznin, VM and Karabasov, SA (2003) Balance-characteristic schemes for piece-wise linear initial data: jumping transport. Mathematical Modelling Journal, 15. pp. 71-83.

Goloviznin, VM and Karabasov, SA and Kobrinksi, IM (2003) Balance-characteristic schemes with staggered conservative and transport variables. Mathematical Modelling Journal, 15. pp. 29-48.

Goloviznin, VM and Karabasov, SA and Kobrinski, IM (2003) On the power of characteristic finite-difference balance approach for convection-diffusion problems. In: 7th International National Congress on Computational Mechanics, 27-7-2003 to 31-7-2003, Albuquerque, New Mexico, USA.

Harvey, SA and Dawes, WN and Bolger, JJ (2003) An automatic design optimisation system for axial compressors. Part II: Experimental validation. In: ASME Turbo Expo 2003: Power for Land, Sea and Air, 16-6-2003 to 19-6-2003, Atlanta, GA, US GT2003-38650..

Harvey, SA and Dawes, WN and Gallimore, SJ (2003) An automatic design optimisation system for axial compressors. Part I: software development. In: The ASME Turbo Expo 2003, 16-6-2003 to 19-6-2003, Atlanta, GA, US GT2003-38115..

Jouvray, A and Tucker, PG (2003) On non-linear RANS, hybrid and LES models applied to complex flows. In: 4th International Symposium on Turbulence Heat and Mass Transfer, 12-10-2003 to 17-10-2003 pp. 665-670..

Liu, JJ and Hynes, TP (2003) The investigation of turbine and exhaust interactions in asymmetric flows-blade-row models applied. Transactions of the ASME, Journal of Turbomachinery, 125. pp. 121-127. ISSN 0889-504X

Liu, Y and Tucker, PG and Jouvray, A and Carpenter, PW (2003) Computation of a non-isothermal complex geometry flow using non-linear URANS and zonal LES modelling. In: 3rd International Symposium on Turbulence and Shear Flow Phenomena, 25-6-2003 to 27-6-2003 pp. 87-91..

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2003) Wake, shock and potential field interactions in a 1.5 stage turbine - Part I: Vane-rotor and rotor-vane interaction. ASME Transactions, Journal of Turbomachinery, 125. pp. 33-39. ISSN 0889-504X

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2003) Wake, shock and potential field interactions in a 1.5 stage turbine - Part II: Vane-vane interactions and discussion of results. ASME Transactions, Journal of Turbomachinery, 125. pp. 40-47. ISSN 0889-504X

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2003) The development of turbine exit flow in a swan-necked inter-stage diffuser. In: ASME Turbo Expo - Power for Land Sea and Air, 16-6-2003 to 19-6-2003, Atlanta, Georgia.

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2003) The development of turbine exit flow in a swan-necked inter-stage diffuser. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 6 B. pp. 863-875.

Miller, RJ and Moss, RW and Ainsworth, RW and Horwood, CK (2003) Time-resolved vane-rotor interaction in a high-pressure turbine stage. ASME Transactions, Journal of Turbomachinery, 125. pp. 1-13. ISSN 0889-504X

Morgans, AS and Karabasov, S and Dowling, AP and Hynes, TP (2003) Low order models for blade response to vorticity gusts in bounded systems. In: 9th AIAA/CEAS Aeroacoustics Conference, 12-5-2003 to 14-5-2003, Hilton Head, SC, US pp. 1122-1131..

Morgans, AS and Karabasov, SA and Dowling, AP and Hynes, TP (2003) Transonic helicopter noise. In: American Helicopter Society 59th Annual Forum, 6-5-2003 to 8-5-2003, Phoenix, AZ, US pp. 46-55..

Ning, F and Xu, L (2003) A Newton's method solver for unsteady viscous flows. Acta Mechanica Sinica, 19. ISSN 0567-7718

Payne, SJ and Ainsworth, RW and Miller, RJ and Moss, RW and Harvey, NW (2003) Unsteady loss in a high pressure turbine stage. International Journal of Heat and Fluid Flow, 24. pp. 698-708. ISSN 0142-727X

Pullan, G and Denton, JD (2003) Numerical simulations of vortex – turbine blade interaction. In: 5th European Turbomachinery Conference, 7-3-2003 to 11-3-2003, Prague, Czech Republic.

Pullan, G and Denton, JD (2003) Numerical simulations of vortex-turbine blade interaction. In: 5th European Turbomachinery Conference, 7-3-2003 to 11-3-2003, Prague, Czech Republic.

Pullan, G and Denton, JD and Dunkley, MJ (2003) An experimental and computational study of the formation of a streamwise shed vortex in a turbine stage. ASME Transacations, Journal of Turbomachinery, 125. pp. 291-297. ISSN 0889-504X

Shahpar, S and Giacche, D and Lapworth, L (2003) Multi-objective design and optimisation of bypass outlet-guide vanes. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 6 A. pp. 591-601.

Smith, AN and Babinsky, H and Dhanasekaran, PC and Savill, AM and Dawes, WN (2003) Computational investigation of groove controlled shock/boundary layer interaction. In: 41st Aerospace Sciences Meeting and Exhibit, 6-1-2003 to 9-1-2003, Reno, NV, US.

Stieger, R and Hodson, HP (2003) Unsteady dissipation measurements on a flat plate subject to wake passing. Proceedings of the Institute of Mechanical Engineers Part A: Journal of Power and Energy, 217. pp. 413-420. ISSN 0832-7823

Stieger, RD and Hodson, HP (2003) Unsteady dissipation measurements on a flat plate subject to wake passing. In: UNSPECIFIED pp. 413-419..

Stieger, RD and Hodson, HP (2003) The transition mechanism of highly-loaded LP turbine blades. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 B. pp. 779-788.

Stieger, RD and Vera, M and Zhang, XF and Hodson, HP (2003) Transition mechanisms and the use of surface roughness to enhance the benefits of wake passing in LP turbines. In: Minnowbrook IV: Boundary Ayer Transition and Unsteady Aspects of Turbomachinery Flows, 17-8-2003 to 20-8-2003, Minnowbrook, Syracuse University, NY, USA pp. 40-41..

Tian, J and Kim, T and Hodson, HP and Sypeck, DJ and Wadley, HNG (2003) The effects of topology upon fluid-flow and heat-transfer within cellular copper structures. In: 8th UK NHTC, -9-2003 to --, Oxford, England.

Tucker, PG (2003) AIAA-2003-3968 Differential equation based length scales to improve DES and RANS simulations. In: 16th AIAA Computational Fluid Dynamics Conference, 23-6-2003 to 26-6-2003, Orlando, Florida, USA pp. 1212-1225..

Tucker, PG (2003) DES/MILES simulations with differential equation based wall distances. In: NAFEMS Awareness seminar, 6-2-2003 to --, IMechE London -..

Tucker, PG (2003) Differential equation based length scale evaluations for DES and RANS solutions - Report on Royal Academy of Engineering Secondment to Boeing Commercial Aeroplanes, Seattle. Technical Report. Warwick University Fluid Dynamics Research Centre Reports.

Tucker, PG (2003) Differential equation based length scale evaluations for DES, RANS and moving grid solutions. In: 3rd International Symposium on Turbulence and Shear Flow Phenomena, 25-6-2003 to 27-6-2003, Sendai, Japan -..

Tucker, PG (2003) Differential equation based wall distance computation for DES and RANS. Journal of Computational Physics, 190. pp. 229-248. ISSN 0021-9991

Tucker, PG (2003) Novel MILES computations for jet flows with noise. In: 3rd International Symposium on Turbulence and Shear Flow Phenomena, -- to --, Sendai, Japan -..

Tucker, PG and Davidson, L (2003) Zonal k-l based large eddy simulations. In: 41st Aerospace Sciences and Meeting and Exhibit, 6-1-2003 to 9-1-2003, Reno, Nevada, USA.

Tucker, PG and Davidson, L and Liu, Y (2003) Hybrid k-l based LES/RANS simulations. In: 4th International Symposium on Turbulence, Heat and Mass Transfer, 12-10-2003 to 17-10-2003 pp. 681-688..

Tucker, PG and Liu, Y and Chung, M and Jouvray, A (2003) Computation of an unsteady complex geometry flow using novel non-linear turbulence models. International Journal for Numerical Methods in Fluids, 43. pp. 979-1001. ISSN 0271-2091

Tucker, PG and Rumsey, CL and Bartels, RE and Biedron, RT (2003) Transport equation based wall distance computations aimed at flows with time-dependent geometry. Technical Report. NASA.

Vicedo, J and Dawes, WN and Savill, AM (2003) Intermittency transport modelling of transition for external aerodynamic flows. In: 33rd AIAA Fluid Dynamics Conference and Exhibit, 23-6-2003 to 26-6-2003, Orlando, Florida, USA.

Vicedo, J and Vilmin, S and Dawes, WN and Savill, AM (2003) Intermittency transport modeling of separated flow transition. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 B. pp. 811-819.

Vilmin, S and Hodson, HP and Dawes, WN and Savill, AM (2003) Predicting wake-passing transition in turbomachinery using an intermittency-conditioned modelling approach. In: 33rd AIAA Fluid Dynamics Conference and Exhibit, 23-6-2003 to 26-6-2003, Orlando, FL, US.

Wang, GL and Fu, YT and Welland, ME and Hodson, HP and Ma, JS (2003) Study on a novel optical fiber pressure sensor. In: UNSPECIFIED pp. 195-200..

Xu, L (2003) Assessing viscous body forces for unsteady calculations. ASME Transactions, Journal of Turbomachinery, 125. pp. 425-432. ISSN 0889-504X

Xu, L and Hynes, TP and Denton, JD (2003) Towards long length scale unsteady modelling in turbomachines. P I MECH ENG A-J POW, 217. pp. 75-82. ISSN 0957-6509

Xu, L and Hynes, TP and Denton, JD (2003) Towards long length scale unsteady modelling in turbomachines. Proceedings of the Institution of Mechanical Engineers Part A, Journal of Power and Energy, 217. pp. 75-82. ISSN 0957-6509

Zhong, B and Tucker, PG and Liu, Y (2003) On a hybrid LES/RANS approach and its application to flow over a matrix of surface mounted cubes. In: 4th International Symposium on Turbulence Heat and Mass Transfer, 12-10-2003 to 17-10-2003, Antalya, Turkey pp. 705-712..

Zhong, S and Chong, TP and Hodson, HP (2003) A comparison of spreading angles of turbulent wedges in velocity and thermal boundary layers. Transactions of the ASME Journal of Fluids Engineering, 125. pp. 267-274. ISSN 0098-2202

de la Rosa Blanco, E and Hodson, HP and Vazquez, R and Torre, D (2003) Influence of the state of the inlet endwall boundary layer on the interaction between pressure surface separation and endwall flows. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 217. pp. 433-442. ISSN 0957-6509

de la Rosa Blanco, E and Hodson, HP and Vazquez, R and Torre, D (2003) Influence of the state of the inlet endwall boundary layer on pressure surface separations on low pressure turbines. Institute of Mechanical Engineers Part A: Journal of Power and Energy, 217. pp. 413-420. ISSN 0957-6509

2002

Armitage, CA and Cant, RS and Dowling, AP and Hynes, TP (2002) Integration of CFD and linearised theory for LPP combustion dynamics. In: 9th International Conference on Numerical Combustion, 7-4-2002 to 10-4-2002, Sorrento, Italy.

Brear, MJ and Hodson, HP and Gonzalez, P and Harvey, NW (2002) Pressure surface separations in low-pressure turbines — part 2: Interactions with the secondary flow. ASME Journal of Turbomachinery, 124. pp. 402-409. ISSN 0889-504X

Brear, MJ and Hodson, HP and Harvey, NW (2002) Pressure surface separations in low pressure turbines: part 1 of 2 - midspan behaviour. Transactions of the ASME Journal of Turbomachinery, 124. pp. 393-401. ISSN 0889-504X

Chaluvadi, VSP and Kalfas, AI and Hodson, HP and Ohyama, H and Watanabe, E (2002) Blade row interaction in a high pressure steam turbine. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 B. pp. 957-968.

Chong, TP and Zhong, S and Hodson, HP (2002) Visualisation of turbulent wedges under the influence of favourable pressure gradients using both shear-sensitive and temperature sensitive liquid crystals. In: Visualization and Imaging in Transport Phenomena. Annals of the New York Academy of Sciences, 972 . New York Academy of Sciences, New York, USA, pp. 95-102. ISBN 157331370x

Chong, TP and Zhong, S and Hodson, HP (2002) Visualization of turbulent wedges under favourable pressure gradients using shear-sensitive and temperature-sensitive liquid crystals. In: Visualization and Imaging in Transport Phenomena. Annals of the New York Academy of Sciences, 972 . New York Academy of Sciences, New York, pp. 95-102. ISBN 1-57331-371-8

Denton, JD and Xu, L (2002) The effects of lean and sweep on transonic fan performance. In: ASME Turbo Expo Power for Land Sea and Air, 3-6-2002 to 6-6-2002, Amsterdam, Netherlands pp. 23-32..

Gonzalez, P and Ulizar, JI and Vazquez, R and Hodson, HP (2002) Pressure and suction surfaces redesign for high lift low pressure turbines. Transactions of the ASME Journal of Turbomachinery, 124. pp. 161-166. ISSN 0889-504X

Hall, CA and Hynes, TP (2002) Nacelle interaction with natural wind prior to take-off. In: 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibition, 7-7-2002 to 10-7-2002, Indianapolis, IN, US.

Howell, RJ and Hodson, HP and Schulte, V and Stieger, RD and Schiffer, HP and Haselbach, F and Harvey, NW (2002) Boundary layer development in the BR710 and BR715 LP turbines - implementation of high lift and ultra high lift concepts. ASME Journal of Turbomachinery, 124. pp. 385-392. ISSN 0889-504X

Jarrett, JP and Clarkson, PJ and Dawes, WN (2002) Improving turbomachinery design process management. In: The ASME Design Engineering Technical Conferences (DETC'02), 29-9-2002 to 2-10-2002, Montreal, Quebec, Canada pp. 161-170..

Jarrett, JP and Dawes, WN and Clarkson, PJ (2002) Accelerating turbomachinery design. In: ASME Gas Turbine Conference, 3-6-2002 to 6-6-2002, Amsterdam, Netherlands pp. 1081-1088..

Karabasov, SA and Hynes, TP (2002) Open boundary conditions of predictor-corrector type for external flows. In: 6th International Conference on Mathematical Modelling and Analysis (MMA), -5-2001 to --, Vilinius, Lithuania pp. 509-519..

Karabasov, SA and Hynes, TP (2002) Open boundary conditions of predictor-corrector type for external flows. In: 8th AIAA Computational Aeroacoustics Conference, 17-6-2002 to 19-6-2002, Breckenridge, Colorado, USA pp. 509-519..

Kim, T and Fuller, AJ and Hodson, HP and Lu, TJ (2002) An experimental study on thermal transport in lightweight metal foams at high Reynolds numbers. In: International Symposium of Compact Heat Exchangers, -8-2002 to --, Grenoble, France pp. 227-232..

Kittichaikarn, C and Ireland, PT and Zhong, S and Hodson, HP (2002) The visualisation and measurement of the onset, turbulent spot production rate, intermittency and heat transfer during wake-induced transition using thermochromic liquid crystals. Technical Report. National Aeronautics and Space Administration, Washington, USA.

Liu, JJ and Hynes, TP (2002) The investigation of turbine and exhaust interactions in asymmetric flows. part 2: turbine-diffuser-collector interactions. In: 47th ASME International Gas Turbine and Aeroengine Congress and Exposition, 3-6-2002 to 6-6-2002, Amsterdam, The Netherlands pp. 179-188..

Liu, JJ and Hynes, TP (2002) The investigation of turbine and exhaust interactions in asymmetric flows: part 1: blade-row models applied. In: 47th ASME International Gas Turbine and Aeroengine Congress and Exposition, 3-6-2002 to 6-6-2002, Amsterdam, The Netherlands pp. 169-177..

Lu, H and Xu, L (2002) The influence of compressor blade leading edge wedge angle on the leading edge separation bubble. Chinese Journal of Engineering Thermophysics, 23. ISSN 0253-231X

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2002) Wake, shock and potential field interactions in a 1.5 stage turbine: Part I: Vane-rotor and rotor-vane interaction. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 B. pp. 715-723.

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2002) Wake, shock and potential field interactions in a 1.5 stage turbine: Part II: Vane-vane interaction and discussion of results. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 B. pp. 725-734.

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2002) The effects of wake, shock and potential field interactions on the rotor of a 1.5 stage turbine: part 1 vane-rotor and rotor-vane interaction. In: ASME Turbo Expo - Power for Land Sea and Air, 3-6-2002 to 6-6-2002, Amsterdam, Netherlands.

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2002) The effects of wake, shock and potential field interactions on the rotor of a 1.5 stage turbine: part 2 vane-vane interaction and discussion of results. In: ASME Turbo Expo - Power for Land Sea and Air, 3-6-2002 to 6-6-2002, Amsterdam, Netherlands.

Pullan, G (2002) An experimental and computational study of a shed vortex in a turbine stage. PhD thesis, UNSPECIFIED.

Pullan, G and Denton, J and Dunkley, M (2002) An experimental and computational study of the formation of a streamwise shed vortex in a turbine stage. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 A. pp. 71-79.

Ramesh, ON and Hodson, HP (2002) Effect of roughness on unsteady separation over a high-lift aerofoil. In: IUTAM Symposium on unsteady flows, 8-4-2002 to 12-4-2002, Toulouse, France.

Ramesh, ON and Hodson, HP (2002) On the dynamics of the calmed region behind a turbulent spot. Technical Report. National Aeronautics and Space Administration, Washington, USA.

Stieger, R and Hodson, HP (2002) LDA measurements of the interaction of a convected wake and decelerated boundary layer. In: Colloquium on "Periodically unsteady flows in turbomachinery", 25-1-2002 to --, Berlin University of Technology, Germany.

Stieger, R and Hodson, HP (2002) Reynolds stress measurement with a single component laser Doppler anemometer. In: XVIth Bi-Annual symposium on measuring techniques in transonic and supersonic flows in cascades and turbomachines, 23-9-2002 to 24-9-2002, Cambridge, UK.

Stow, SR and Dowling, AP and Hynes, TP (2002) Reflection of circumferential modes in a choked nozzle. Journal of Fluid Mechanics, 467. pp. 215-240. ISSN 0022-1120

Tucker, PG (2002) Computation of unsteady complex geometry flows using novel non-linear turbulence models. In: 1st International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2002), 8-4-2002 to 12-4-2002, South Africa -..

Tucker, PG (2002) Novel multigrid orientated solution adaptive time-step approaches. International Journal for Numerical Methods in Fluids, 40. pp. 507-519. ISSN 0271-2091

Tucker, PG (2002) Temporal behaviour of flow in rotating cavities. Numerical Heat Transfer, 41. pp. 611-627. ISSN 1040-7782

Vera, M and Hodson, HP (2002) Low-speed vs high speed testing of LP turbine blade wake interaction. In: XVIth Bi-Annual symposium on measuring techniques in transonic and supersonic flows in cascades and turbomachines, 23-9-2002 to 24-9-2002, Cambridge, UK.

Yang, X and Miller, RJ and Hodson, HP (2002) A new probe for the measurement of high-temperature gases. In: XVIth Bi-Annual symposium on measuring techniques in transonic and supersonic flows in cascades and turbomachines, 23-9-2002 to 24-9-2002, Cambridge, UK.

Yang, X and Miller, RJ and Hodson, HP (2002) A new probe for the measurement of high-temperature gases. In: 16th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines, 23-9-2002 to 24-9-2002, Cambridge, UK.

Yao, YF and Savill, AM and Dawes, WN and Sandham, ND (2002) Simulation of turbulent trailing-edge flow using RANS and DNS. Flow, Turbulence and Combustion, 68. pp. 313-333. ISSN 1386-6184

Yao, YF and Savill, AM and Sandham, ND and Dawes, WN (2002) Simulation and modelling of turbulent trailing edge flow. Flow, Turbulence and Combustion, 68. pp. 313-333. ISSN 1386-6184

Zhao, C and Kim, T and Lu, TJ and Hodson, HP (2002) Modelling on thermal transport in cellular metal foams. In: 8th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, 24-6-2002 to 26-6-2002, St Louis, Missouri, USA.

Zhong, S and Chong, TP and Hodson, HP (2002) On the spreading angle of turbulent spots in non-isothermal boundary layers with favourable pressure gradients. In: ASME Turbo Expo 2002; v.3A. ASME: American Society of Mechanical Engineers, pp. 571-579. ISBN 0791836088

Zhong, S and Chong, TP and Hodson, HP (2002) Visualisation of turbulent wedges under favourable pressure gradients using both shear-sensitive and temperature-sensitive liquid crystals. In: FEDSM 2002 ASME Joint U.S.-European Fluids Engineering Conference, -7-2002 to --, Montreal, Quebec, Canada.

Zhong, S and Chong, TP and Hodson, HP (2002) Visualization of turbulent wedges under favourable pressure gradients using both shear-sensitive and temperature-sensitive liquid crystals. American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 257. pp. 161-168.

2001

Babinsky, H and Kuschel, U and Hodson, HP and Moore, DF and Welland, ME (2001) Geometries for five-hole-type probes with planar sensor arrays. AIAA Journal, 39. pp. 2414-2416. ISSN 0001-1452

Bewick, CL and Adams, MJ and Schwaller, PJG and Xu, L (2001) Noise and aerodynamic design and the test of a low tip speed fan. In: 7th AIAA/CEAS Aeroacoustics Conference, 28-5-2001 to 30-5-2001, Maastricht, Netherlands.

Cant, RS and Dawes, WN and Savill, AM (2001) Combustion instability mechanisms in a lean premixed gas turbine combustor. In: 2nd Joint Meeting of the U.S. Sections of the Combustion Institute, 25-3-2001 to 28-3-2001, Oakland Marriott City Center Hotel, Oakland, California.

Chaluvadi, VSP and Kalfas, AI and Banieghbal, MR and Hodson, HP and Denton, JD (2001) Blade row interaction in a high pressure turbine. AIAA Journal of Propulsion and Power, 17. pp. 892-901. ISSN 0748-4658

Chung, YM and Tucker, PG and Luo, KH (2001) Large eddy simulation of complex internal flows. In: The Direct and Large-Eddy Simulation IV on Ercoftac Series, 18-7-2001 to 21-7-2001 pp. 373-380..

Dambach, R and Hodson, HP (2001) Tip leakage flow in a radial inflow turbine with varying gap height. AIAA Journal of Propulsion and Power, 17. pp. 644-650. ISSN 0748-4658

Dawes, WN and Dhanasekaran, PC and Demargne, AAJ and Kellar, WP and Savill, AM (2001) Reducing bottlenecks in the CAD-to-mesh-to-solution cycle time to allow CFD to participate in design. Transactions of the ASME Journal of Turbomachinery, 123. pp. 552-557. ISSN 0889-504X

Demargne, AAJ and Longley, JP (2001) Cavity and protrusion effects in a single-stage compressor. In: ASME Turbo Expo — Land, Sea and Air, Gas Turbine Conference, 4-6-2001 to 7-6-2001, New Orleans, Louisiana, USA.

Dupere, IDJ and Dawes, WN and Tester, BJ and Wilson, AG (2001) Predictions of multiple tone noise and distortion noise in a transonic fan using unsteady CFD. In: 4th European Conference on Turbomachinery, 20-3-2001 to 23-3-2001, Florence, Italy pp. 435-442..

Elsner, W and Vilmin, S and Dawes, WN and Hodson, HP and Savill, AM (2001) Modelling of unsteady boundary layer on a blade profile with unNEWT PUIM code. In: Proceedings of CFD for Turbomachinery Applications (CFDTurbo2001), -9-2001 to --, Gdansk, Poland 236-..

Goloviznin, VM and Hynes, TP and Karabasov, SA (2001) CABARET finite-difference schemes for one-dimensional Euler equations. Mathematical Modelling and Analysis, 6. pp. 210-220. ISSN 1392-6292

Goloviznin, VM and Hynes, TP and Karabasov, SA (2001) Comparative analysis of several high-resolution TVD schemes for the one-dimensional Euler equations. In: 3rd International Conference on Finite Difference Schemes, 1-9-2001 to 4-9-2001, Oalanga, Lithuania.

Gonzalez, P and Hodson, HP and Ulizar, I (2001) Improved blade profiles for high lift low pressure turbine applications. In: Conference Proceedings of the 4th European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics, 20-3-2001 to 23-3-2001, Florence, Italy pp. 129-138..

Hynes, TP and Karabasov, SA (2001) Unsteady calculation of 2-D inviscid flow with shocks. In: 6th International Conference on Mathematical Modelling and Analysis (MMA), -5-2001 to --, Vilinius, Lithuania.

Hynes, TP and Karabasov, SA (2001) A compact high resolution monotonic difference scheme for the one dimensional Euler equations. In: 6th International Conference on Mathematical Modelling and Analysis (MMA), -5-2001 to --, Vilinius, Lithuania.

Hynes, TP and Karabasov, SA (2001) Unsteady calculation of 2-d inviscid flow with shocks. In: Proceedings of the 6th International Conference on Mathematical Modelling and Analysis, 31-5-2001 to 2-6-2001, Vilnius, Lithuania p. 34..

Hynes, TP and Karabasov, SA (2001) A compact high-resolution monotonic difference scheme for the one-dimensional Euler equations. In: Proceedings of the 6th International Conference on Mathematical Modelling and Analysis, 31-5-2001 to 2-6-2001, Vilnius, Lithuania p. 33..

Kim, TB and Zhao, CY and Lu, TJ and Hodson, HP (2001) Convective heat dissipation with lattice-frame materials. Mechanics of Materials, 36. pp. 767-780. ISSN 0167-6636

Lu, TJ and Kim, T and Zhao, CY and du Chene, A and Hodson, HP (2001) Thermal management with micro-architectured materials and metal foams. In: ONR Workshop, -6-2001 to --, Cambridge University, Cambridge, England.

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2001) Time-resolved vane-rotor-vane interaction in a transonic one-and-a-half stage turbine. In: 4th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (Euroturbo 4), 20-3-2001 to 23-3-2001, Florence, Italy pp. 937-949..

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2001) Time-resolved vane-rotor-vane interaction in a transonic one-and-a-half stage turbine. In: UNSPECIFIED pp. 675-685..

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2001) Time-resolved vane-rotor-vane interaction in a transonic one-and-a-half stage turbine. Proceedings of Institution of Mechanical Engineers, PT A: Journal of Power and Energy, 215. pp. 675-685. ISSN 0957-6509

Ning, F and Xu, L (2001) Application of GMRES method to two-dimensional steady turbulence flows. Acta Mechanica Sinica, 33. ISSN 0567-7718

Ning, F and Xu, L (2001) Application of one equation Spalart-Allmaras turbulence model in the numerical simulations of internal flows. Chinese Journal of Engineering Thermophysics, 22. ISSN 0253-231X

Ning, F and Xu, L (2001) Numerical investigation of transonic compressor rotor flow using an implicit 3D flow solver with one-equation Spalart-Allmaras turbulence model. In: ASME Turbo Expo, Power for Land, Sea and Air, 4-6-2001 to 7-6-2001, New Orleans, Louisiana, USA.

Ramesh, ON and Hodson, HP (2001) Transition initiation by unsteadiness and roughness in a high-lift turbine blade: an experimental study. In: ERCOFTAC/SIG-33 Symposium on Global Flow Instability and Control, 22-9-2001 to 26-9-2001, Crete, Greece.

Ramesh, ON and Hodson, HP and Harvey, NW (2001) Separation control in ultra-high lift aerofoils by unsteadiness and surface roughness. In: International symposium on 15th International Symposium on Air breathing Engines, 3-9-2001 to 7-9-2001, Bangalore, India.

Roychowdhury, DG and Das, SK and Sundararajan, TS and Tucker, PG (2001) Development of a finite volume non-orthogonal, collocated grid based solution algorithm for solution of incompressible N-S equations in complex geometries. NAFEMS International Journal of CFD Case Studies, 3. pp. 83-108.

Roychowdhury, DG and Tucker, PG and Rayner, D (2001) Prediction of oscillatory flow in a sharp 180 degree bend. In: ICFD, Conference on Numerical Methods for Fluid Dynamics, 26-3-2001 to 29-3-2001, University of Oxford, England -..

Tucker, PG (2001) Computation of particle and scalar transport for complex geometry turbulent flows. Transactions of ASME, Journal of Fluids Engineering, 123. pp. 372-381. ISSN 0098-2202

Tucker, PG (2001) Computation of unsteady internal flows: fundamental methods with case studies. Kluwer Academic Publishers, Boston, USA, -.

Tucker, PG (2001) Models aid the analysis of electronics cooling. Microwaves and RF. pp. 95-96.

Tucker, PG (2001) Novel multigrid orientated solution adaptive time-step approaches. In: 7th International Conference on Numerical Methods for Fluid Dynamics, -10-2001 to --, Oxford, UK pp. 499-508..

Tucker, PG (2001) Temporal behaviour of flow in rotating cavities. In: 2nd International Symposium on Advances in Computational Heat Transfer, 20-5-2001 to 25-5-2001, Palm Cove, Queensland, Australia pp. 655-662..

Tucker, PG and Mosquera, A (2001) Introduction to grid and mesh generation for CFD. -.

Tucker, PG and Pan, Z (2001) URANS computations for a complex internal isothermal flow. Computer Methods in Applied Mechanics and Engineering, 190. pp. 2893-2907. ISSN 0045-7825

Xu, L and Hynes, TP and Denton, JD (2001) Towards long length scale unsteady modelling in turbomachines. In: The 15th International Symposium on Airbreathing Engines (XV ISABE), 3-9-2001 to 7-9-2001, Bangalore, India pp. 57-58..

Xu, XZ and Xu, L and Cai, H (2001) Numerical investigation into cascade flow under partial admission. Chinese Journal of Engineering Thermophysics, 22. ISSN 0253-231X

Xu, XZ and Xu, L and Cai, H (2001) Some important problems about impeller design and the influence into internal flow and performance. Chinese Journal of Engineering Thermophysics, 22. ISSN 0253-231X

Zhao, CY and Kim, T and Lu, TJ and Hodson, HP (2001) Thermal transport phenomena in novel lightweight metal foams. In: Heat Exchange Engineering, -6-2001 to --, Birmingham, UK.

Zhao, CY and Lu, TJ and Kim, T and Hodson, HP (2001) Numerical modelling on thermal management with porous metals. In: ADOPT, -8-2001 to --, MIT, Cambridge, MA, USA.

2000

Ainsworth, RW and Miller, RJ and Moss, RW and Thorpe, SJ (2000) Unsteady pressure measurement. Measurement Science and Technology, 11. pp. 1055-1076. ISSN 0957-0233

Babinsky, H and Kuschel, U and Hodson, HP and Moore, DF and Welland, ME (2000) The aerodynamic design and use of multi-sensor pressure probes for MEMS applications. In: 15th Bi-Annual Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, 21-9-2000 to 22-9-2000, Florence, Italy.

Birkby, P and Cant, RS and Dawes, WN and Demargne, AAJ and Dhanesekaran, P and Kellar, WP and Rycroft, NC and Savill, AM and Eggels, RLGM and Jennions, IK (2000) CFD analysis of a complete industrial lean premixed gas turbine combustor. In: ASME International Gas Turbine and Aeroengine Congress and Exhibition, -5-2000 to --, Munich, Germany.

Birkby, P and Cant, RS and Dawes, WN and Savill, AM and Demargne, AAJ and Dhanasekeran, PC and Kellar, WP and Rycroft, NC and Eggels, RLGM and Jennions, IK (2000) CFD analysis of a complete industrial lean premixed gas turbine combustor. In: ASME International Gas Turbine and Aeroengine Congress and Exposition, 8-5-2000 to 11-5-2000, Munich, Germany.

Dambach, R and Hodson, HP (2000) Tip leakage flow: a comparison between small axial and radial turbines. In: Micro-Turbine Generators. Professional Engineering Publishing, pp. 97-108. ISBN 1860583911

De Foy, B and Dawes, WN (2000) Unstructured pressure-correction solver based on a consistent discretization of the Poisson equation. International Journal of Numerical Methods in Fluids, 34. pp. 463-478. ISSN 0271-2091

Demargne, AAJ and Longley, JP (2000) The aerodynamic interaction of stator shroud leakage and mainstream flows in compressors. In: ASME Turbo Expo 2000, 45th ASME International Gas Turbine and Aeroengine Technical Congress, Exposition and Users Symposium, 8-5-2000 to 11-5-2000, Munich, Germany -..

Gjerstad, S and Fu, Y and Hodson, HP and Dawes, WN (2000) A study of the frequency response of a micro machined shear stress sensor based on thin film anemometry. In: The 15th Biannual Symposium on Measuring techniques for transonic and supersonic flows in cascades and turbomachines, 21-9-2000 to 22-9-2000.

Goloviznin, VM and Hynes, TP and Karabasov, SA (2000) Comparative analysis of several high-resolution TVD schemes for the one-dimensional Euler equations. In: Finite Difference Scheme 2000, --2000 to --, Palanga, Lithuania.

Goloviznin, VM and Karabasov, SA (2000) Discrete mathematical models with space split time derivative of two-phase fluid filtration. Izvest. Acad. Nayk (Journal of Russian Academy of Science), Ser. E.

Goloviznin, VM and Karabasov, SA (2000) Jumping transport method for the numerical solution of linear hyperbolic systems, an exact algorithm for convection modelling on Euler grids. Technical Report. Nuclear Safety Institute, Russia.

Goloviznin, VM and Karabasov, SA (2000) Leap-type transport algorithm for the numerical solution of hyperbolic equations on Euler grids. In: Finite Difference Scheme 2000, --2000 to --, Palanga, Lithuania.

Goloviznin, VM and Karabasov, SA and Tishkina, LV (2000) Jumping transport method for the numerical solution of linear hyperbolic systems. Technical Report. Nuclear Safety Institute, Russia.

Goloviznin, VM and Sukhodulov, DA and Karabasov, SA (2000) A variation approach to the construction of finite-difference scheme with space-split time derivative for the Korteweg-de Vries equation. Mathematical Modelling Journal, 3.

Hodson, HP and Howell, RJ (2000) High lift low pressure turbines. In: Minnowbrook III: Boundary Layer Transition and Unsteady Aspects of Turbomachinery Flows, 20-8-2000 to 23-8-2000, Minnowbrook, Syracuse University, New York, U.S.A..

Hodson, HP and Howell, RJ (2000) Unsteady flow: its role in the low pressure turbine. In: 9th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines, 4-9-2000 to 8-9-2000, Lyon, France.

Holmes, SH and Jouvray, A and Tucker, PG (2000) An assessment of a range of turbulence models when predicting room ventilation. In: International Conference Healthy Buildings, -- to -- pp. 401-406..

Howell, RJ and Hodson, HP (2000) Separation bubble interactions with turbulent spots and wakes in the turbomachinery environment at a Reynolds of around 130,000. In: Minnowbrook III: Boundary Layer Transition and Unsteady Aspects of Turbomachinery Flows, 20-8-2000 to 23-8-2000, Minnowbrook, Syracuse University, New York, U.S.A..

Howell, RJ and Ramesh, ON and Hodson, HP and Harvey, NW and Schulte, V (2000) High lift and aft loaded profiles for low pressure turbines. Transactions of the ASME Journal of Turbomachinery, 123. pp. 181-188. ISSN 0889-504X

Liu, JJ and Hynes, TP (2000) A Navier-stokes solver using edge-based smoothing. In: 1st International Conference on Computational Fluid Dynamics, 10-7-2000 to 14-7-2000, Kyoto, Japan pp. 313-318..

Lu, H and Xu, L and Zhang, Z (2000) Improved compressor leading edge design. Chinese Journal of Aerospace Power, 15. ISSN 1000-8055

Marshall, J and Xu, L and Denton, JD and Chew, J (2000) Prediction of low engine order inlet distortion driven resonance in a low aspect ratio fan. In: ASME Turbo Expo - Power for Land, Sea and Air, 8-5-2000 to 11-5-2000, Munich, Germany.

Ning, F and Xu, L (2000) Application of GMREC algorithm to 2D inviscid flows. Chinese Journal of Computational Physics, 17. pp. 537-547. ISSN 1001-246X

Pan, Z and Tucker, PG (2000) Transient and steady flow computations for an electro-mechanical system. NAFEMS International Journal of CFD Case Studies, 2. pp. 103-118.

Rayner, D and Tucker, PG and Hines, EL (2000) Odour movement prediction using computational fluid dynamics (CFD)- Technical report for MARS UK Ltd. Technical Report. Warwick University Fluid Dynamics Research Centre Reports.

Rycroft, NC and Savill, AM and Dawes, WN (2000) Reynolds-averaged and large-eddy simulations of flow through a tube bundle. In: 3rd International Symposium on Turbulence, Heat and Mass Transfer, -4-2000 to --, Nagoya, Japan.

Tanaka, K and Kalfas, AI and Hodson, HP (2000) Development of single sensor fast response pressure probes. In: XVth Bi-Annual Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, 28-9-2000 to 29-9-2000, Florence, Italy.

Taylor, J and Hynes, TP (2000) The control of non-axisymmetric flow in axial turbomachinery using circumferentially varying stator exit angles. In: ASME Turbo Expo 2000, 45th ASME International Gas Turbine and Aeroengine Technical Congress, Exposition and Users Symposium, 8-5-2000 to 11-5-2000, Munich, Germany.

Tucker, PG (2000) Computation and measurement of dust transport and deposition in electronics. In: NAFEMS Multiphase Flow Modelling Seminar, 8-11-2000 to --, University of Warwick, England.

Tucker, PG (2000) Prediction of turbulent oscillatory flows in complex systems. International Journal for Numerical Methods in Fluids, 33. pp. 869-895. ISSN 0271-2091

Tucker, PG and Mosquera, A and Butler, M and Smith, G and Iacovides, H and Rose, A and Simpson, B (2000) Workbook of examples: laminar and turbulent two-dimensional internal flows. -.

Tucker, PG and Pan, Z (2000) A Cartesian cut cell method for incompressible laminar flow. Applied Mathematical Modelling, 24. pp. 591-606. ISSN 0307-904X

Tucker, PG and Pan, Z (2000) Turbulence modelling for unsteady flow complex systems. In: Conference Proceedings of the 6th THERMINIC, 24-9-2000 to 27-9-2000, Budapest, Hungary pp. 101-104..

Tucker, PG and Pan, Z (2000) URANS computations for a complex internal isothermal flow. In: 3rd International Symposium on Turbulence Heat and Mass Transfer, 2-4-2000 to 6-4-2000, Nagoya, Japan pp. 505-512..

Vicedo, J and Dawes, WN and Savill, AM (2000) Intermittency transport modelling for natural transition in external aerodynamic applications. In: ECCOMAS 2000: 6th European Congress on Computational Methods in Applied Sciences and Engineering, 11-9-2000 to 14-9-2000, Barcelona, Spain.

Vicedo, J and Vilmin, S and Dawes, WN and Hodson, HP and Savill, AM (2000) The extension of CFD-friendly turbulence modelling to include transition. In: 8th European Turbulence Conference (ETC-8), 27-6-2000 to 30-6-2000, Barcelona, Spain pp. 213-218..

Vicedo, J and Vilmin, S and Savill, AM and Dawes, WN (2000) Extension of intermittency transport modelling to natural transition in external aerodynamic applications. In: Royal Aeronautical Society Aerodynamics Research Conference, -4-2000 to --, London, UK.

Vilmin, S and Dawes, WN and Hodson, HP and Savill, AM (2000) Predicting wake-induced transition in turbomachinery using an intermittency-prescribed modelling. In: ECCOMAS 2000: 6th European Congress on Computational Methods in Applied Sciences and Engineering, 11-9-2000 to 14-9-2000, Barcelona, Spain.

Vilmin, S and Hodson, HP and Savill, AM and Dawes, WN (2000) Predicting wake passing transition in turbomachinery using a prescribed unsteady intermittency model. In: European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), 11-9-2000 to 14-9-2000, Barcelona, Spain.

Yao, YF and Savill, AM and Dawes, WN and Sandham, ND (2000) Simulation of turbulent trailing-edge flow using unsteady RANS & DNS. In: 3rd International Symposium on Turbulence Heat and Mass Transfer, 2-4-2000 to 6-4-2000, Nagoya, Japan pp. 463-470..

Zhong, S and Kittichaikan, C and Hodson, HP and Ireland, PT (2000) Visualisation of turbulent spots under the influence of adverse pressure gradients. Journal of Experiments in Fluids, 28. pp. 385-393. ISSN 0723-4864

Zou, Z and Xu, L (2000) Prediction of 3-D unsteady flow using implicit dual time step approach. Acta Aeronautica et Astronautica, 21. pp. 317-321. ISSN 1000-6893

Zou, Z and Xu, L and Zhang, Z (2000) Establishment of repeating boundary condition in multi-stage compressor and its applications in compressor flow field diagnosis. Chinese Journal of Aerospace Power, 15. pp. 22-26. ISSN 1000-8055

1999

Bryanston-Cross, P and Wilson, T and Tucker, PG and Pan, Z and Dunkley, P and Udrea, D and Hines, EL (1999) Application of fuzzy logic to the automatic processing of particle image velocimetry images of a flow induced by adjacent spinning cylinders. In: UNSPECIFIED pp. 127-130..

Dambach, R and Hodson, HP (1999) A new method of data reduction for single-sensor pressure probes. In: 44th ASME International Gas Turbine and Aeroengine Congress and Exposition, 7-6-1999 to 10-6-1999, Indianapolis, USA..

Dambach, R and Hodson, HP and Huntsman, I (1999) 1998 Turbomachinery Committee Best Paper Award - An experimental study of tip clearance flow in a radial inflow turbine. J TURBOMACH, 121. pp. 644-650. ISSN 0889-504X

Dambach, R and Hodson, HP and Huntsman, I (1999) An experimental study of tip clearance flow in a radial inflow turbine. Transactions of the ASME Journal of Turbomachinery, 121. pp. 644-650. ISSN 0889-504X

Dawes, WN (1999) Challenges for turbomachinery CFD in the 21st Century. In: 1st International Conference on Engineering Thermophysics (ICET '99), 18-8-1999 to 21-8-1999, Beijing, China.

Dawes, WN (1999) Challenges for turbomachinery CFD in the 21st century. Proceedings of the 1st International Conference on Engineering Thermophysics (ICET '99). pp. 2-73.

Day, IJ and Breuer, T and Escuret, J and Cherrett, M and Wilson, A (1999) Stall inception and the prospects for active control in four high-speed compressors. Transactions of the ASME, Journal of Turbomachinery, 121. pp. 18-27. ISSN 0889-504X

Denton, JD and Xu, L (1999) Turbomachinery blade design systems. VKI Lecture Series 1999-02.

Denton, JD and Xu, L (1999) The exploitation of three-dimensional flow in turbomachinery design. P I MECH ENG C-J MEC, 213. pp. 125-137. ISSN 0954-4062

Denton, JD and Xu, L (1999) The exploitation of 3D flow in turbomachinery design. Proceedings of the Institution of Mechanical Engineering, Part C: Journal of Mechanical Engineering Science, 213. pp. 125-137. ISSN 0954-4062

Freidrichs, S and Hodson, HP and Dawes, WN (1999) The design of an improved endwall film-cooling configuration. Transactions of the ASME Journal of Turbomachinery, 121. pp. 772-780. ISSN 0889-504X

Freidrichs, S and Hodson, HP and Dawes, WN (1999) The design of an improved endwall film-cooling configuration. Transactions of the ASME Journal of Turbomachinery, 121. pp. 772-780. ISSN 0889-504X

Goloviznin, VM and Sukhodulov, DA and Karabasov, SA (1999) CABARET scheme for the Korteweg-de Vries equation. In: 8th All-Russian School-Seminar, Contemporary Problems of Mathematical Modelling, --1999 to --, Abrau-Durso, Russia.

Gostelow, JP and Hodson, HP and Walker, GJ (1999) Comparisons between triggered turbulent spots and unsteady transition phenomena on compressor and turbine blading. In: IUTAM symposium on Laminar-turbulent transition. Springer, Berlin, Germany; New York, U.S.A., pp. 365-370. ISBN 3540679472

Harvey, NW and Schulte, V and Howell, RJ and Hodson, HP (1999) The role of research in the aerodynamic design of an advanced low-pressure turbine. Proceedings of the Institution of Mechanical Engineers Part A, Journal of Power and Energy, 213. pp. 235-242. ISSN 0957-6509

Hodson, HP and Dambach, R (1999) Single-sensor fast response pressure probes - the “least-squares” method of data reduction. In: 14th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines, 2-9-1999 to 4-9-1999, University of Limerick, Republic of Ireland.

Hodson, HP and Gostelow, JP (1999) Similarities in development between triggered turbulent spots and wake-induced turbulent patches. In: 37th AIAA Aerospace Sciences Meeting and Exhibit, 11-1-1999 to 14-1-1999, Reno, NV.

Karabasov, SA (1999) Finite-difference schemes with space split time derivative for two-phase fluid filtration problems. PhD thesis, UNSPECIFIED.

Kellar, WP and Savill, AM and Dawes, WN (1999) Integrated CAD/CFD visualisation of a generic Formula 1 car front wheel flowfield. In: Lecture Notes in Computer Science. High-Performance Computing and Networking: 7th International Conference, HPCN Europe 1999 Amsterdam, The Netherlands, April 12-14, 1999 Proceedings, 1593 . SpringerVerlagv KG, Germany, pp. 90-98.

Kittichaikarn, C and Ireland, PT and Zhong, S and Hodson, HP (1999) An investigation of the onset of wake-induced transition and turbulent spot production rate using thermochromic liquid crystals. In: 44th ASME International Gas Turbine and Aeroengine Congress and Exposition, 7-6-1999 to 10-6-1999, Indianapolis, USA -..

Pan, Z and Tucker, PG (1999) Computation of incompressible flow using a Cartesian grid with a boundary cut cell treatment. In: 8th International Symposium on Computational Fluid Dynamics, 5-9-1999 to 10-9-1999, Bremen, Germany pp. 614-621..

Ramesh, ON and Hodson, HP (1999) A new intermittency model incorporating the calming effect. In: 3rd European Conference on Turbomachinery, 2-3-1999 to 5-3-1999, London, UK pp. 243-258..

Seifert, A and Hodson, HP (1999) Periodic turbulent strips and calmed regions in a transitional boundary layer. AIAA Journal, 37. pp. 1127-1128. ISSN 0001-1452

Sinclair, FM and Birkby, P and Savill, AM and Dawes, WN (1999) Flow visualisation animation using results from flow analyses. In: Proceedings of the Eurographics UK 17th Annual Conference, 13-4-1999 to 15-4-1999, Cambridge, UK.

Sinclair, FM and Dhanasekaran, PC and Demargne, AAJ and Dawes, WN and Savill, AM (1999) From CAD To CFD - interior volume removal as a data conversion tool. In: Proceedings of the Eurographics UK 17th Annual Conference, 13-4-1999 to 15-4-1999, Cambridge, UK.

Watterson, JK and Dawes, WN and Savill, AM and White, AJ (1999) Predicting turbulent flow in a staggered tube bundle. International Journal of Heat and Fluid Flow, 20. pp. 581-591. ISSN 0142-727X

Zhong, S and Kittichaikan, C and Hodson, HP and Ireland, PT (1999) Visualization of turbulent spots and unsteady wake-induced boundary-layer transition with thermochromic liquid crystals. Journal of Optics and Laser Technology, 31. pp. 33-39. ISSN 0030-3992

Zhong, S and Kittichaikan, C and Hodson, HP and Ireland, PT (1999) A study of unsteady wake-induced boundary-layer transition with thermochromic liquid crystals. Proceedings of the Institution of Mechanical Engineers - Part G - Journal of Aerospace Engineering, 213. pp. 163-172. ISSN 0954-4100

Zhong, S and Kittichaikan, C and Hodson, HP and Ireland, PT (1999) A study of unsteady wake-induced boundary-layer transition with thermochromic liquid crystals. P I MECH ENG G-J AER, 213. pp. 163-171. ISSN 0954-4100

1998

Camp, TR and Day, IJ (1998) A study of spike and modal stall phenomena in a low-speed axial compressor. Transactions of the ASME, Journal of Turbomachinery, 120. pp. 393-401. ISSN 0889-504X

Dambach, R and Hodson, HP and Huntsman, I (1998) Experimental study of tip clearance flow in a radial inflow turbine. American Society of Mechanical Engineers (Paper). ISSN 0402-1215

Dawes, WN (1998) Simulation of unsteady blade row interaction with CFD: applications. In: Invited Lectures- Von Karman Institute for Fluid Mechanics, -2-1998 to --, Brussels, Belgium.

Dawes, WN (1998) Simulation of unsteady blade row interaction with CFD: background. In: Invited Lectures- Von Karman Institute for Fluid Mechanics, -2-1998 to --, Brussels, Belgium.

Denton, JD and Dawes, WN (1998) Computational fluid dynamics for turbomachinery design. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 213. pp. 107-124. ISSN 0954-4062

Freeman, C and Wilson, AG and Day, IJ and Swinbanks, MA (1998) Experiments in active control of stall on an aeroengine gas turbine. ASME Transactions, Journal of Turbomachinery, 120. pp. 637-647. ISSN 0889-504X

Goloviznin, VM and Karabasov, SA (1998) Non-linear correction of "Cabaret" scheme. In: 2nd International Finite-Difference Conference, --1998 to --, Minsk, Russia.

Goloviznin, VM and Karabasov, SA (1998) Non-linear correction of 'CABARET' scheme. Mathematical Modelling Journal, 10. pp. 107-123.

Goloviznin, VM and Karabasov, SA (1998) Non-linear correction of CABARET scheme. Technical Report. Nuclear Safety Institute, Russia.

Goloviznin, VM and Karabasov, SA (1998) Some examples of 2D two-phase filtration simulation. Technical Report. Nuclear Safety Institute, Russia.

Konrad, W and Brehm, N and Kameier, F and Freeman, C and Day, IJ (1998) Combustion instability investigations on the BR710 jet engine. ASME Transactions, Journal of Engineering for Gas Turbines and Power, 120. pp. 35-40. ISSN 0742-4795

Konrad, W and Brehm, N and Kameier, F and Freeman, C and Day, IJ (1998) Combustion instability investigations on the BR710 jet engine. In: UNSPECIFIED pp. 34-40..

Schulte, V and Hodson, HP (1998) Prediction of the becalmed region for LP turbine profile design. Transactions of the ASME Journal of Turbomachinery, 120. pp. 839-845. ISSN 0889-504X

Schulte, V and Hodson, HP (1998) Unsteady wake-induced boundary layer transition in high lift LP turbines. Transactions of the ASME Journal of Turbomachinery, 120. pp. 28-35. ISSN 0889-504X

Sinclair, FM and Birkby, P and Savill, AM and Cant, RS and Dawes, WN (1998) Numerical flow visualisation using results from an unstructured adaptive mesh. In: 8th International Symposium on Flow Visualization, 1-9-1998 to 4-9-1998, Sorrento, Italy.

Watterson, JK and Connell, IJ and Savill, AM and Dawes, WN (1998) A solution-adaptive mesh procedure for predicting confined explosions. International Journal for Numerical Methods in Fluids, 26. pp. 235-247. ISSN 0271-2091

Zhong, S and Kittichaikan, C and Hodson, HP and Ireland, PT (1998) Visualisation of turbulent spots under the influence of adverse pressure gradients. In: 8th International Symposium on Flow Visualisation, 1-9-1998 to 4-9-1998, Sorrento, Italy.

Zhong, S and Kittichaikan, CK and Hodson, HP and Ireland, PT (1998) A study of unsteady wake-induced boundary-layer transition with thermochromic liquid crystals. In: International Conference on Optical Methods and Data Processing in Heat and Fluid Flow, 16-4-1998 to 17-4-1998, London, UK pp. 181-190..

1997

Birkby, P and Sinclair, FM and Savill, AM and Cant, RS and Dawes, WN (1997) The use of an unstructured mesh adaptive code to perform resolved obstacle computations for confined explosions. In: Proceedings, NEL/NAFEMS Conference on CFD Industrial Case Studies with Off-Shore Applications, -2-1997 to --, Aberdeen, Great Britain.

Camp, TR and Day, IJ (1997) Study of spike and modal stall phenomena in a low-speed axial compressor. American Society of Mechanical Engineers (Paper). ISSN 0402-1215

Cravero, C and Dawes, WN (1997) Throughflow design using an automatic optimisation strategy. In: ASME International Gas Turbine and Aeroengine Congress, 2-6-1997 to 5-6-1997, Orlando, Florida, US.

Curtis, EM and Hodson, HP and Banieghbal, MR and Howell, RJ and Harvey, NW (1997) Development of blade profiles for low pressure turbine applications. Transactions of the ASME Journal of Turbomachinery, 119. pp. 531-538. ISSN 0889-504X

Dawes, WN (1997) Current and future developments in turbomachinery CFD. In: The 2nd European Conference on Turbomachinery Fluid Mechanics & Thermodynamics, 5-3-1997 to 7-3-1997, Antwerp, Belgium.

Demargne, AAJ and Longley, JP (1997) Comparisons between measured and calculated stall development in four high-speed multi-stage compressors. In: ASME 42nd International Gas Turbine and Aeroengine Congress, 2-6-1997 to 5-6-1997, Orlando, FL, USA.

Freidrichs, S and Hodson, HP and Dawes, WN (1997) Aerodynamic aspects of endwall film cooling. Transactions of the ASME Journal of Turbomachinery, 119. pp. 786-793. ISSN 0889-504X

Freidrichs, S and Hodson, HP and Dawes, WN (1997) Aerodynamic aspects of endwall film-cooling. Transactions of the ASME Journal of Turbomachinery, 119. pp. 786-793. ISSN 0889-504X

Halstead, DE and Wisler, DC and Okiishi, TH and Walker, GJ and Hodson, HP and Shin, HW (1997) Boundary layer development in axial compressors and turbines part 1 of 4: composite picture. Transactions of the ASME Journal of Turbomachinery, 119. pp. 114-127. ISSN 0889-504X

Halstead, DE and Wisler, DC and Okiishi, TH and Walker, GJ and Hodson, HP and Shin, HW (1997) Boundary layer development in axial compressors and turbines part 2 of 4: compressors. Transactions of the ASME Journal of Turbomachinery, 119. pp. 426-444. ISSN 0889-504X

Halstead, DE and Wisler, DC and Okiishi, TH and Walker, GJ and Hodson, HP and Shin, HW (1997) Boundary layer development in axial compressors and turbines part 3 of 4: turbines. Transactions of the ASME Journal of Turbomachinery, 119. pp. 225-237. ISSN 0889-504X

Halstead, DE and Wisler, DC and Okiishi, TH and Walker, GJ and Hodson, HP and Shin, HW (1997) Boundary layer development in axial compressors and turbines part 4 of 4: computations and analyses. Transactions of the ASME Journal of Turbomachinery, 119. pp. 128-139. ISSN 0889-504X

Hodson, HP and Schulte, V and Howell, RJ (1997) The calmed region and its significance in low pressure turbines. In: Workshop on Boundary Layer Transition in Turbomachines, 7-9-1997 to 10-9-1997, Minnowbrook, Syracuse University, New York, U.S.A..

Joo, WG and Hynes, TP (1997) The application of actuator disks to calculations of the flow in turbofan installations. J TURBOMACH, 119. pp. 733-741. ISSN 0889-504X

Joo, WG and Hynes, TP (1997) The simulation of turbomachinery blade rows in asymmetric flow using actuator disks. J TURBOMACH, 119. pp. 723-732. ISSN 0889-504X

Karabasov, SA (1997) The application of Cabaret finite scheme for immiscible fluid filtration. Technical Report. Nuclear Safety Institute, Russia.

Karabasov, SA and Semenov, VN (1997) One-dimensional model of two-phase fluid filtration in porous media. Technical Report. Nuclear Safety Institute, Russia.

Long, CA and Morse, AP and Tucker, PG (1997) Measurement and computation of heat transfer in high-pressure compressor drum geometries with axial throughflow. In: UNSPECIFIED pp. 51-60..

Longley, JP (1997) Calculating the flowfield behaviour of high-speed multi-stage compressors. In: ASME 42nd International Gas Turbine and Aeroengine Congress, 2-6-1997 to 5-6-1997, Orlando, FL, USA -..

Moss, RW and Ainsworth, RW and Sheldrake, CD and Miller, RJ (1997) The unsteady pressure field over a turbine blade surface: visualisation and interpretation of experimental data. In: ASME Turbo Expo 1997: Power for Land, Sea and Air, 2-6-1997 to 5-6-1997, Orlando, Florida.

Tucker, PG (1997) CFD applied to electronic systems: A review. IEEE T COMPON PACK A, 20. pp. 518-529. ISSN 1070-9886

Tucker, PG (1997) Numerical precision and dissipation errors in rotating flows. Int. J. Num. Meth. Heat Fluid Flow, 7. pp. 647-658.

Zhong, S and Hodson, HP and Ireland, PT (1997) Low-turbulence water tunnel for boundary layer transition studies using liquid crystal technique. Technical Report. Cambridge University Engineering Department, Cambridge, Great Britain.

Zhong, S and Hodson, HP and Ireland, PT (1997) An analytical solution of thermal footprint of turbulent spots. Technical Report. Cambridge University Engineering Department, Cambridge, U.K.

Zhong, S and Kittichaikan, C and Hodson, HP and Ireland, PT (1997) Study of turbulent spots with temperature-sensitive liquid crystals. In: Turbulence, Heat and Mass Transfer. Delft University Press, Netherlands, pp. 179-188. ISBN 9040714657

Zhong, S and Kittichaikarn, C and Hodson, HP and Ireland, PT (1997) Visualisation of turbulent spots with temperature sensitive liquid crystals. In: UNSPECIFIED pp. 179-188..

1996

Cherrett, MA and Lyes, PA and Longley, JP and Demargne, AAJ (1996) Measurement and calculation of instability inception in a high speed multi-stage compressor. In: Unsteady Flows in Turbomachines. Von Karman Institute Lecture Series . Von Karman Institute, Belgium.

Connell, IJ and Watterson, JK and Savill, AM and Dawes, WN (1996) Predicting the SOLVEX box confined explosion test case with an unstructured adaptive mesh code. In: Abstracts from the 26th Combustion Institute Symposium, 29-7-1996 to 2-8-1996, Naples, Italy.

Connell, IJ and Watterson, JK and Savill, AM and Dawes, WN and Bray, KNC (1996) An unstructured adaptive mesh CFD approach to predicting confined premixed methane-air explosions. In: Proceedings of the 2nd International Specialists meeting on Fuel-Air Explosions, 26-6-1996 to 28-6-1996, Christian Michelsen Research (CMR) Bergen, Norway.

Connell, IK and Watterson, JK and Savill, AM and Dawes, WN (1996) An unstructured mesh Navier-Stokes solution procedure for predicting confined explosions. In: Proceedings of the International Congresses on Theoretical and Applied Mechanics(ICTAM), 25-8-1996 to 31-8-1996, Kyoto, Japan.

Curtis, EM and Hodson, HP and Banieghbal, MR and Denton, JD and Howell, RJ and Harvey, NW (1996) Development of blade profiles for low pressure turbine applications. American Society of Mechanical Engineers (Paper). ISSN 0402-1215

Dawes, WN (1996) Advanced numerical methods: solution of the 3D Navier-Stokes equations on structured & unstructured meshes for steady & unsteady flows in turbomachinery. In: Convegno Turbomacchine ’96, -7-1996 to --, Genova, Italy.

Dawes, WN (1996) Construction of CAD-based unstructured mesh models for 3D Navier-Stokes simulations. In: Proceedings of the Fifteenth International Conference on Numerical Methods in Fluid Dynamics, 24-6-1996 to 28-6-1996, Monterey, CL, US.

Dawes, WN (1996) The generation of 3D, stretched, viscous unstructured meshes for arbitrary domains. In: 1996 International Gas Turbine and Aeroengine Congress & Exhibition, 10-6-1996 to 14-6-1996, Birmingham, UK -..

Freidrichs, S and Hodson, HP and Dawes, WN (1996) Distribution of film cooling effectiveness on a turbine endwall measured using the ammonia and Diazo technique. ASME Journal of Turbomachinery, 118. pp. 613-621. ISSN 0889-504X

Freidrichs, S and Hodson, HP and Dawes, WN (1996) Distribution of film cooling effectiveness on a turbine endwall measured using the ammonia and diazo technique. Transactions of the ASME Journal of Turbomachinery, 118. pp. 613-621. ISSN 0889-504X

Hodson, HP (1996) Unsteady boundary layers on a flat plate disturbed by periodic wakes .2. Measurements of unsteady boundary layers and discussion - Discussion. J TURBOMACH, 118. pp. 344-346. ISSN 0889-504X

Hodson, HP and Dawes, WN (1996) Interpretation of measured profile losses in unsteady wake-turbine blade interaction studies. American Society of Mechanical Engineers (Paper). ISSN 0402-1215

Hodson, HP and Dawes, WN (1996) On the interpretation of measured profile losses in unsteady wake-turbine blade interaction studies. In: 41st International Gas Turbine and Aeroengine Conference and Exhibition, 10-6-1996 to 13-6-1996, Birmingham, UK pp. 276-284..

Longley, JP and Shin, HW and Plumley, RE and Silkowski, PD and Day, IJ and Greitzer, EM and Tan, CS and Wisler, DC (1996) Effects of rotating inlet distortion on multistage compressor stability. Transactions of the ASME, Journal of Turbomachinery, 118. pp. 181-188. ISSN 0889-504X

Lukachko, SP and Waitz, IA and Miake Lye, RC and Brown, RC and Anderson, MR and Dawes, WN (1996) Chemical processes in the turbine and exhaust nozzle. In: Proceedings of an International Colloquium on the Impact of Aircraft Emissions upon the Atmosphere, 15-10-1996 to 18-10-1996, Paris, France.

Miller, RJ and Ainsworth, RW (1996) An ultra-high speed traverse system for fast response aerodynamic measurements in transonic flow facilities. In: 13th Symposium on Measuring techniques for transonic and supersonic flow in cascades and turbomachines, 5-9-1996 to 6-9-1996, Zurich, Switzerland.

O'Sullivan, MN and Krasnodebski, JK and Waitz, IA and Greitzer, EM and Tan, CS and Dawes, WN (1996) Computational study of viscous effects on lobed mixer flow features & performance. Journal for Propulsion and Power, 12. pp. 449-456. ISSN 0748-4658

O'Sullivan, MN and Krasnodebski, JK and Waitz, IA and Greitzer, EM and Tan, CS and Dawes, WN (1996) Computational study of viscous effects on lobed mixer flow features and performance. Journal of Propulsion and Power, 12. pp. 449-456. ISSN 0748-4658

Tucker, PG and Hewit, JR (1996) CFD techniques and their relevance to mechatronics. MECHATRONICS, 6. 193-&. ISSN 0957-4158

Tucker, PG and Keogh, PS (1996) On the dynamic thermal state in a hydrodynamic bearing with a whirling journal using CFD techniques. In: UNSPECIFIED pp. 356-363..

Tucker, PG and Long, CA (1996) Numerical investigation into influence of geometry on flow in a rotating cavity with an axial throughflow. INT COMMUN HEAT MASS, 23. pp. 335-344. ISSN 0735-1933

Watterson, JK and Savill, AM and Dawes, WN and Bray, KNC (1996) Predicting confined explosions with an unstructured adaptive mesh code. In: Proceedings, Joint Meeting of the Portugese, British, Spanish and Swedish Sections of the Combustion Institute, 1-4-1996 to 4-4-1996, Funchal, Madeira, Portugal.

1995

Aubert, S and Dawes, WN (1995) Numerical analysis of an axial flow fan with air-separator equipment. In: 31st AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 10-7-1995 to 12-7-1995, San Diego, CL, US.

Banieghbal, MR and Curtis, EM and Denton, JD and Hodson, HP and Huntsman, I and Schulte, V and Harvey, NW (1995) Wake passing in LP turbine blades. In: 85th Symposium on Loss Mechanisms and Unsteady Flows in Turbomachines, 8-5-1995 to 12-5-1995, Derby, UK -..

Dawes, WN (1995) Unsteady flows and loss production in centrifugal and axial compressor stages. In: Proceedings of the NATO AGARD Propulsion and Energetics Panel 85th Symposium, Loss Mechanisms and Unsteady Flows in Turbomachinery, 8-5-1995 to 12-5-1995, Derby, Great Britain.

Dawes, WN (1995) A simulation of the unsteady interaction of a centrifugal impeller with its vaned diffuser: flow analysis. Transactions of the ASME Journal of Turbomachinery, 117. P. 213-. ISSN 0889-504X

Hodson, HP and Banieghbal, MR and Dailey, GM (1995) 3-Dimensional interactions in the rotor of an axial turbine. Journal for Propulsion and Power, 11. pp. 196-204. ISSN 0748-4658

Hodson, HP and Banieghbal, MR and Dailey, GM (1995) Three-dimensional interactions in the rotor of an axial turbine. Journal of Propulsion and Power, 11. pp. 196-204. ISSN 0748-4658

Huntsman, I and Hodson, HP (1995) Boundary layer development in a radial inflow turbine at off-design flow conditions. In: 12th International Symposium on Air Breathing Engines (XII ISABE), 10-9-1995 to 15-9-1995, Melbourne, Australia pp. 268-278..

Huntsman, I and Hodson, HP (1995) A laminar flow rotor for a radial inflow turbine. Journal for Propulsion and Power, 11. pp. 1170-1178. ISSN 0748-4658

Hustad, CW and Savill, AM and Dawes, WN (1995) A numerical investigation of aerofoil boundary-layer manipulator profile for cruise flight conditions. Applied Scientific Research, 54. pp. 267-280. ISSN 0003-6994

TUCKER, P and LONG, C (1995) CFD PREDICTION OF VORTEX BREAKDOWN IN A ROTATING CAVITY WITH AN AXIAL THROUGHFLOW OF AIR. INT COMMUN HEAT MASS, 22. pp. 639-648. ISSN 0735-1933

Zhong, S and Hodson, HP and Ireland, PT (1995) Visualisation of turbulent spots with thermochromic liquid crystals. In: VDI Berichte- the 1st European Conference on Turbomachinery Fluid Dynamic and Thermodynamic, -3-1995 to -- pp. 189-200..

1994

Dawes, WN (1994) Advanced calculation methods. In: Axial Fan and Compressor course, Concepts ETI, -9-1994 to --, Turin, Italy.

Dawes, WN (1994) Unstructured mesh methods. In: COSMASE, Computation in Sciences, Methods and Algorithms on Supercomputing for Engineering, Short Course on Computational Fluid Dynamics (a COMETT project), --1994 to --, Ecole Polytechnique Federale de Lausanne, Switzerland.

Dawes, WN (1994) A numerical study of the interaction of a transonic compressor rotor overtip leakage vortex with the following blade row. In: Proceedings of the International Gas Turbine and Aeroengine Congress and Exposition, 13-6-1994 to 16-6-1994, The Hague, Netherlands -..

Dawes, WN (1994) The solution-adaptive numerical simulation of the 3D viscous flow in the serpentine coolant passage of a radial inflow turbine blade. Transactions of the ASME Journal of Turbomachinery, 116. pp. 141-148. ISSN 0889-504X

Day, IJ (1994) Axial compressor performance during surge. Journal of Propulsion and Power, 10. pp. 329-336. ISSN 0748-4658

Day, IJ and Freeman, C (1994) The unstable behavior of low and high-speed compressors. Transactions of the ASME, Journal of Turbomachinery, 116. p. 194-. ISSN 0889-504X

Freidrichs, S and Hodson, HP (1994) The ammonia and diazo surface coating technique for measuring film cooling effectiveness. In: 12th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, 12-9-1994 to 13-9-1994, Prague, Czech Republic.

Hodson, HP and Huntsman, I and Steele, AB (1994) Investigation of boundary layer development in a multistage LP turbine. Journal of Turbomachinery, 116. pp. 375-383. ISSN 0889-504X

Hodson, HP and Huntsman, I and Steele, AB (1994) An investigation of boundary layer development in a multistage LP turbine. Transactions of the ASME Journal of Turbomachinery, 116. pp. 375-383. ISSN 0889-504X

Huntsman, I and Hodson, HP (1994) An experimental assessment of the aerodynamic performance of a low-speed radial inflow turbine. In: AIAA/SAE/ASME/ASEE 30th Joint Propulsion Conference and Exhibit, 27-6-1994 to 29-6-1994, Indianapolis, IN.

Longley, JP (1994) A review of nonsteady flow models for compressor stability. Transactions of the ASME Journal of Turbomachinery, 116. pp. 202-215. ISSN 0889-504X

Longley, JP and Shin, H-W and Plumley, RE and Silkowski, PD and Day, IJ and Greitzer, EM and Tan, CS and Wisler, DC (1994) Effects of rotating inlet distortion on multistage compressor stability. American Society of Mechanical Engineers (Paper). pp. 1-12. ISSN 0402-1215

O'Sullivan, MN and Waitz, IA and Greitzer, EM and Tan, CS and Dawes, WN (1994) A computational study of viscous effects on lobed mixer flow features and performance. In: 30th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 27-6-1994 to 29-6-1994, Indianapolis, US.

Schulte, V and Hodson, HP (1994) Wake-separation bubble interaction in low pressure turbines. In: AIAA/SAE/ASME/ASEE 30th Joint Propulsion Conference and Exhibit, 27-6-1994 to 29-6-1994, Indianapolis, IN.

1993

Chen, G and Dawes, WN and Hodson, HP (1993) Numerical analysis of tip gap flow. In: AIAA/SAE/ASME/ASEE 29th Joint Propulsion Conference and Exhibit, 28-6-1993 to 30-6-1993, Monterey, CA, US.

Chen, G and Dawes, WN and Hodson, HP (1993) A numerical and experimental investigation of turbine tip gap flow. In: AIAA/SAE/ASME/ASEE 29th Joint Propulsion Conference and Exhibit, 28-6-1993 to 30-6-1993, Monterey, California, U.S.A..

DOMINY, RG and HODSON, HP (1993) AN INVESTIGATION OF FACTORS INFLUENCING THE CALIBRATION OF 5-HOLE PROBES FOR 3-DIMENSIONAL FLOW MEASUREMENTS. In: UNSPECIFIED pp. 513-519..

Dawes, WN (1993) Advanced calculation methods. In: Invited Lecture on the Axial Fan and Compressor course, -4-1993 to --, Wilder, Vermont, U.S.A..

Dawes, WN (1993) Simulating unsteady turbomachinery flows on unstructured meshes which adapt both in time and space. In: International Gas Turbine and Aeroengine Congress and Exposition, 24-5-1993 to 27-5-1993, Cincinnati, Ohio, U.S.A. -..

Dawes, WN (1993) The extension of a solution-adaptive 3D Navier-Stokes solver towards geometries of arbitrary complexity. Transaction of the ASME Journal of Turbomachinery, 115. p. 283-. ISSN 0889-504X

Dawes, WN (1993) The practical application of solution-adaption to the numerical simulation of complex turbomachinery problems. pp. 221-269.

Dawes, WN and White, AJ (1993) Fluid flow and heat transfer prediction in a non-rotating axial turbine internal coolant passage and comparison with experiment. In: International Gas Turbine and Aeroengine Congress and Exposition, 24-5-1993 to 27-5-1993, Cincinnati, Ohio, U.S.A. pp. 1-9..

Day, IJ (1993) Active suppression of rotating stall and surge in axial compressors. Transactions of the ASME, Journal of Turbomachinery, 115. pp. 40-47. ISSN 0889-504X

Day, IJ (1993) Stall inception in axial flow compressors. Transactions of the ASME, Journal of Turbomachinery, 115. pp. 1-9. ISSN 0889-504X

Day, IJ and Freeman, C (1993) Unstable behavior of low and high speed compressors. American Society of Mechanical Engineers (Paper). pp. 1-9. ISSN 0402-1215

Dominy, RG and Hodson, HP (1993) An investigation of factors influencing the calibration of 5-hole cone and pyramid probes. Transactions of the ASME Journal of Turbomachinery, 115. pp. 513-519. ISSN 0889-504X

Goyal, R and Dawes, WN (1993) A comparison of the measured and predicted flowfield in a modern fan-bypass configuration. Transactions of the ASME Journal of Turbomachinery, 115. pp. 273-283. ISSN 0889-504X

Hendricks, GJ and Bonnaure, LP and Longley, JP and Greitzer, EM and Epstein, AH (1993) Analysis of rotating stall onset in high speed axial flow compressors. In: 29th Joint Propulsion Conference and Exhibit, 28-6-1993 to 30-6-1993, Monterey, CA -..

Heyes, FJG and Hodson, HP (1993) The measurement and prediction of the tip clearance flow in linear turbine cascades. Transactions of the ASME Journal of Turbomachinery, 115. pp. 376-382. ISSN 0889-504X

Hodson, HP (1993) Aspects of transition in turbomachines. In: End-Stage Transition Workshop, 18-8-1993 to --, Minnowbrook, Syracuse University, New York, U.S.A..

Hodson, HP and Banieghbal, MR and Dailey, GM (1993) The analysis and prediction of the effects of bladerow interactions in axial flow turbines. In: Institution of Mechanical Engineers Conference of Turbomachinery, 7-10-1993 to --, London, Great Britain.

Hodson, HP and Dominy, RG (1993) Annular cascade testing. In: AGARDograph. North Atlantic treaty Organisation. Advisory Group for Aerospace Research and Development (AGARD).

Hodson, HP and Huntsman, I and Steele, AB (1993) Investigation of boundary layer development in a multistage LP turbine. American Society of Mechanical Engineers (Paper). pp. 1-9. ISSN 0402-1215

Paduano, J and Epstein, AH and Valavani, L and Longley, JP and Greitzer, EM and Guenette, GR (1993) Active control of rotating stall in a low-speed axial compressor. Transactions of the ASME Journal of Turbomachinery, 115. pp. 48-56. ISSN 0889-504X

1992

Addison, JS and Hodson, HP (1992) Modeling of unsteady transitional boundary layers. Journal of Turbomachinery, 114. pp. 580-589. ISSN 0889-504X

Addison, JS and Hodson, HP (1992) Modelling of unsteady transitional boundary layers. Transactions of the ASME Journal of Turbomachinery, 114. pp. 580-589. ISSN 0889-504X

Cherret, MA and Bryce, JD and Hodson, HP (1992) Development of pneumatic probes for measurements in 2-D and 3-D flows. In: 11th International Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, 14-9-1992 to 15-9-1992, Munich, Germany.

Dawes, WN (1992) Simulation of three-dimensional viscous flow in turbomachinery geometries using a solution-adaptive unstructured mesh methodology. Journal of Turbomachinery, 114. pp. 528-537. ISSN 0889-504X

Dawes, WN (1992) Towards improved throughflow capability: the use of 3D viscous flow solvers in a multistage environment. Transactions of the ASME, Journal of Turbomachinery, 114. p. 8-. ISSN 0889-504X

Dawes, WN (1992) The application of unstructured mesh 3D Navier-Stokes solvers to complex primary and secondary gas paths in turbomachinery. In: 7th IMACS International Conference on Computer Methods for Partial Differential Equations, -6-1992 to --, Rutgers University, NJ, US.

Dawes, WN (1992) The simulation of three-dimensional viscous flow in turbomachinery geometries using a solution-adaptive unstructured mesh methodology. Transactions of the ASME Journal of Turbomachinery, 114. p. 528-. ISSN 0889-504X

HUNTSMAN, I and HODSON, HP and HILL, SH (1992) THE DESIGN AND TESTING OF A RADIAL FLOW TURBINE FOR AERODYNAMIC RESEARCH. J TURBOMACH, 114. pp. 411-418. ISSN 0889-504X

Heyes, FJG and Hodson, HP and Dailey, GM (1992) Effect of blade tip geometry on the tip leakage flow in axial turbine cascades. Journal of Turbomachinery, 114. pp. 643-651. ISSN 0889-504X

Heyes, FJG and Hodson, HP and Dailey, GM (1992) The effect of blade tip geometry on the tip leakage flow in axial turbines. Transactions of the ASME Journal of Turbomachinery, 114. pp. 643-651. ISSN 0889-504X

Hodson, HP and Addison, JS and Shepherdson, CA (1992) Models for unsteady wake-induced transition in axial turbomachines. Journal de Physique III, 2. pp. 545-574. ISSN 1155-4320

Huntsman, I and Hodson, HP and Hill, SH (1992) The design and testing of a radial inflow turbine for aerodynamic research. Transactions of the ASME Journal of Turbomachinery, 114. pp. 411-418. ISSN 0889-504X

Longley, JP and Greitzer, EM (1992) Inlet distortion effects in aircraft propulsion system integration. In: Fundamentals and Special Problems of Synthetic Aperture Radar (SAR). AGARD Lecture Series, 182 . AGARD.

Ng, EYK and Dawes, WN (1992) A novel approach to high resolution compressible cascade flow analysis using the Navier-Stokes equations. In: 37th ASME International Gas Turbine Conference, 1-6-1992 to 4-6-1992, Cologne, Germany.

Perrin, G and Leboeuf, F and Dawes, WN (1992) Analysis of three-dimensional viscous flow in a supersonic axial flow compressor rotor with emphasis on the tip leakage flow. In: 37th ASME International Gas Turbine Conference, 1-6-1992 to 4-6-1992, Cologne, Germany.

1991

Dawes, WN (1991) Multi-blade row Navier-Stokes simulations of fan-bypass configurations. In: 36th ASME International Gas Turbine Conference, 3-6-1991 to 6-6-1991, Orlando, Florida, US.

Dawes, WN (1991) Progress in the experimental validation of a solution-adaptive 3D Navier-Stokes solver. In: 3rd European Propulsion Forum, 13-11-1991 to 15-11-1991, Paris, France.

Dawes, WN (1991) Recent improvements to an unstructured mesh 3D Navier-Stokes solver aimed at extending the range of geometric capability. In: 11th ISABE Conference, 1-9-1991 to 6-9-1991, Nottingham, UK.

Dawes, WN (1991) The development of a solution-adaptive 3D Navier-Stokes solver for turbomachinery. In: 27th AIAA/SAE/ASME/ASEE Joint Propulsion Conference, 24-6-1991 to 26-6-1991, Sacramento, California, US.

Huntsman, I and Hodson, HP (1991) Measurements and predictions of the flow around the leading edge of a radial inflow turbine rotor. In: 10th International Symposium on Air Breathing Engines, 1-9-1991 to 6-9-1991, Nottingham, Great Britain.

1990

Addison, JS and Hodson, HP (1990) Unsteady transition in an axial flow turbine, part 1: measurements on the turbine rotor. Transactions of the ASME Journal of Turbomachinery, 112. pp. 206-214. ISSN 0889-504X

Addison, JS and Hodson, HP (1990) Unsteady transition in an axial flow turbine, part 2: cascade measurements and modelling. Transactions of the ASME Journal of Turbomachinery, 112. pp. 215-221. ISSN 0889-504X

Addison, JS and Hodson, HP (1990) Unsteady transition in an axial-flow turbine. Part 1. Measurements on the turbine rotor. Journal of Turbomachinery, 112. pp. 206-214. ISSN 0889-504X

Addison, JS and Hodson, HP (1990) Unsteady transition in an axial-flow turbine. Part 2. Cascade measurements and modeling. Journal of Turbomachinery, 112. pp. 215-221. ISSN 0889-504X

Dawes, WN (1990) Numerical methods for practical simulation of turbomachinery flows. In: Fluid Dynamics of Turbomachinery course, ASME International Gas Turbine Institute, -6-1990 to --, Iowa State University, US.

Dawes, WN (1990) Simulation of turbomachinery flows by non-time marching methods. In: Fluid Dynamics of Turbomachinery course, ASME International Gas Turbine Institute, -6-1990 to --, Iowa State University, US.

Dawes, WN (1990) Time marching solution of 2D and 3D Navier-Stokes equations for turbomachinery flows. In: Fluid Dynamics of Turbomachinery Course, ASME International Gas Turbine Institute, -6-1990 to --, Iowa State University, U.S.A..

Dawes, WN (1990) A comparison of zero and one equation turbulence modelling for turbomachinery calculations. In: 35th ASME International Gas Turbine Conference, 10-6-1990 to 14-6-1990, Brussels, Belgium.

Hodson, HP (1990) Modelling unsteady transition and its effects on profile loss. Transactions of the ASME Journal of Turbomachinery, 112. pp. 691-701. ISSN 0889-504X

Longley, JP (1990) Measured and predicted effects on inlet distortion on axial compressors. In: ASME Gas Turbine Conference, -6-1990 to --, Brussels, Belgium -..

Longley, JP and Hynes, TP (1990) Stability of flow through multistage axial compressors. Transactions of the ASME, Journal of Turbomachinery, 112. pp. 126-132. ISSN 0889-504X

Longley, JP and Hynes, TP (1990) Stability of flow through multistage axial compressors. Journal of Turbomachinery, 112. pp. 126-132. ISSN 0889-504X

McDougall, NM and Cumpsty, NA and Hynes, TP (1990) Stall inception in axial compressors. Journal of Turbomachinery, 112. pp. 116-125. ISSN 0889-504X

Siden, GLD and Dawes, WN and Albråten, PJ (1990) Numerical simulation of the two-dimensional viscous flow in blade cascades using a solution adaptive unstructured mesh. Transactions of the ASME, Journal of Turbomachinery, 112. p. 311-. ISSN 0889-504X

Walker, PJ and Dawes, WN (1990) The extension and application of three-dimensional time marching to incompressible turbomachinery flow. Transactions of the ASME, Journal of Turbomachinery, 112. p. 385-. ISSN 0889-504X

1989

Chue, R and Hynes, TP and Greitzer, EM and Tan, CS and Longley, JP (1989) Calculations of inlet distortion induced compressor flow field instability. International Journal of Heat and Fluid Flow, 10. pp. 211-223. ISSN 0142-727X

Hodson, HP and Addison, JS (1989) Wake-boundary layer interactions in an axial-flow turbine at off-design conditions. Transactions of the ASME Journal of Turbomachinery, 111. pp. 181-192. ISSN 0889-504X

McDougall, NM and Cumpsty, NA and Hynes, TP (1989) Stall inception in axial compressors. In: UNSPECIFIED.

Siden, GLD and Dawes, WN and Albråten, PJ (1989) A solution adaptive finite element method applied to two-dimensional unsteady viscous compressible cascadeflow. In: 9th ISABE Conference, 4-9-1989 to 9-9-1989, Athens, Greece.

1988

Dawes, WN (1988) Analysis of 3D viscous flows in transonic compressors. In: Transonic Compressors, 1-2-1988 to 4-2-1988, Von Karman Institute, Brussels, Belgium.

Dawes, WN (1988) Development of a 3D Navier-Stokes solver for application to all types of turbomachinery. In: 33rd ASME International Gas Turbine Conference, -6-1988 to --, Amsterdam, Netherlands.

Dawes, WN (1988) The application of multigrid to Navier-Stokes simulation of 3D flow in axial and radial turbomachinery. International Journal for Numerical Methods in Fluids, 8. pp. 1217-1227. ISSN 1097-0363

Hodson, HP and Dominy, RG (1988) An investigation into the effects of Reynolds number and turbulence on the calibration of 5-hole cone probes. In: 9th International Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, 21-3-1988 to 22-3-1988, Oxford, Great Britain.

XU, L and DENTON, JD (1988) THE BASE-PRESSURE AND LOSS OF A FAMILY OF 4 TURBINE-BLADES. J TURBOMACH, 110. pp. 9-17. ISSN 0889-504X

Zangeneh Kazemi, M and Dawes, WN and Hawthorne, WR (1988) Three dimensional flow in radial inflow turbines. In: 33rd ASME International Gas Turbine Conference, -6-1988 to --, Amsterdam, Netherlands.

1987

DONG, Y and GALLIMORE, SJ and HODSON, HP (1987) 3-DIMENSIONAL FLOWS AND LOSS REDUCTION IN AXIAL COMPRESSORS. J TURBOMACH, 109. pp. 354-361. ISSN 0889-504X

Dawes, WN (1987) Application of a three-dimensional viscous compressible flow solver to a high-speed centrifugal compressor rotor-secondary flow and loss generation. In: IMechE Conference on Turbomachinery - Efficiency prediction and improvement, 1-9-1987 to 3-9-1987, Robinson College, Cambridge, Great Britain pp. 53-62..

Dawes, WN (1987) Developments in the calculation of 3D viscous compressible flow in axial turbomachinery. In: Aerothermodynamics of Low Pressure Steam Turbines and Condensers. Hemisphere Publishing Corporation, Washington, USA, -. ISBN 0891164464

Dawes, WN (1987) Multigrid accelerated Navier-Stokes computations of the 3D flow in axial and radial flow turbomachinery. In: The Fifth International Conference on Numerical Methods in Laminar and Turbulent Flow, --1987 to --, Swansea, UK.

Dawes, WN (1987) NUMERICAL STUDY OF THE 3D FLOWFIELD IN A TRANSONIC COMPRESSOR ROTOR WITH A MODELLING OF THE TIP CLEARANCE FLOW. AGARD Conference Proceedings. 21. 1-21. 12. ISSN 0549-7191

Dawes, WN (1987) A numerical analysis of the three dimensional viscous flow in a transonic compressor rotor and comparison with experiment. Transactions of the ASME, Journal of Turbomachinery, 109. pp. 83-90. ISSN 0889-504X

Dawes, WN and Camus, JJ and Xu, LP and Graham, CG (1987) MEASURED AND PREDICTED LOSS GENERATION IN TRANSONIC TURBINE BLADING. AGARD Conference Proceedings. 8. 1-8. 11. ISSN 0549-7191

Dong, Y and Gallimore, S and Hodson, HP (1987) Three-dimensional flows and loss reduction in axial compressors. Transactions of the ASME Journal of Turbomachinery, 109. pp. 354-361. ISSN 0889-504X

HODSON, HP and DOMINY, RG (1987) 3-DIMENSIONAL FLOW IN A LOW-PRESSURE TURBINE CASCADE AT ITS DESIGN CONDITION. J TURBOMACH, 109. pp. 177-185. ISSN 0889-504X

HYNES, TP and GREITZER, EM (1987) A METHOD FOR ASSESSING EFFECTS OF CIRCUMFERENTIAL FLOW DISTORTION ON COMPRESSOR STABILITY. J TURBOMACH, 109. pp. 371-379. ISSN 0889-504X

Hodson, HP and Dominy, RG (1987) Three-dimensional flow in a low-pressure turbine cascade at its design condition. Transactions of the ASME, Journal of Turbomachinery, 109. pp. 177-185. ISSN 0889-504X

Hodson, HP and Dominy, RG (1987) The off-design performance of a low pressure turbine and cascade. Transactions of the ASME Journal of Turbomachinery, 109. pp. 201-209. ISSN 0889-504X

Hynes, TP and Chue, R and Greitzer, EM and Tan, CS (1987) CALCULATIONS OF INLET DISTORTION INDUCED COMPRESSOR FLOWFIELD INSTABILITY. In: UNSPECIFIED 7. 1-7. 16..

McDougall, NM and Dawes, WN (1987) Numerical simulation of the strong interaction between a compressor blade clearance jet and stalled passage flow. In: 7th GAMM Conference on Numerical Methods in Fluid Mechanics, 9-9-1987 to 11-9-1987, Louvain-la-Neuve, Belgium.

1986

Dawes, WN (1986) Application of full Navier-Stokes solvers to turbomachinery flow problems. In: Numerical Techniques for Viscous Flow Calculations in Turbomachinery Bladings, -1-1986 to --, Von Karman Institute, Brussels, Belgium.

Dawes, WN (1986) Computation of off-design flows in a transonic compressor rotor. Transactions of the ASME Journal of Engineering for Gas Turbines and Power, 108. pp. 144-150. ISSN 0742-4795

Dawes, WN (1986) A numerical method for the analysis of 3D viscous compressible flow in turbine cascades; application to secondary flow development in a cascade with and without dihedral. In: International Gas Turbine Conference and Exhibit, 8-6-1986 to 12-6-1986, Dusseldorf, Germany -..

Dawes, WN (1986) A numerical study of the 3D flowfield in a transonic compressor rotor with a modelling of the tip clearance flow. In: UNSPECIFIED pp. 1-21..

Dawes, WN and Camus, J-J and Xu, LP and Graham, CG (1986) Measured and predicted loss generation in transonic turbine blading. In: UNSPECIFIED pp. 1-8..

1985

Dawes, WN (1985) A pre-processed implicit algorithm for 3D viscous compressible flow. In: 6th GAMM Conference on Numerical Methods in Fluid Mechanics, 25-9-1985 to 27-9-1985, Göttingen, Germany.

Dawes, WN and Richards, PH (1985) Comparison of inviscid and viscous computations with an interferometrically measured transonic flow. AIAA Journal, 23. p. 834-. ISSN 0001-1452

HODSON, HP (1985) AN INVISCID BLADE-TO-BLADE PREDICTION OF A WAKE-GENERATED UNSTEADY-FLOW. J ENG GAS TURB POWER, 107. pp. 337-344. ISSN 0742-4795

Hodson, HP (1985) Boundary layer transition and separation near the leading edge of a high speed turbine blade. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, 107. pp. 127-134. ISSN 0742-4795

Hodson, HP (1985) INVISCID BLADE-TO-BLADE PREDICTION OF A WAKE-GENERATED UNSTEADY FLOW. Journal of Engineering for Gas Turbines and Power, 107. pp. 337-344. ISSN 0742-4795

Hodson, HP (1985) Measurements of wake-generated unsteadiness in the rotor passages of axial flow turbines. ASME Journal of Engineering for Gas Turbines and Power, 107. pp. 467-476. ISSN 0742-4795

Hodson, HP (1985) A blade-to-blade prediction of a wake-generated unsteady flow. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, 107. pp. 337-344. ISSN 0742-4795

1984

Dawes, WN (1984) Computation of viscous compressible flow in blade cascades using an implicit iterative replacement algorithm. pp. 157-164.

HODSON, HP (1984) BOUNDARY-LAYER-TRANSITION AND SEPARATION NEAR THE LEADING-EDGE OF A HIGH-SPEED TURBINE BLADE. MECH ENG, 106. p. 89. ISSN 0025-6501

HODSON, HP (1984) AN INVISCID BLADE-TO-BLADE PREDICTION OF A WAKE-GENERATED UNSTEADY-FLOW. MECH ENG, 106. p. 85. ISSN 0025-6501

HODSON, HP (1984) MEASUREMENTS OF WAKE-GENERATED UNSTEADINESS IN THE ROTOR PASSAGES OF AXIAL-FLOW TURBINES. MECH ENG, 106. pp. 88-89. ISSN 0025-6501

Hodson, HP (1984) Boundary layer and loss measurements on the rotor of an axial flow turbine. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, 106. pp. 391-399. ISSN 0742-4795

Hynes, TP and Greitzer, EM (1984) METHOD FOR ASSESSING EFFECTS OF CIRCUMFERENTIAL FLOW DISTORTION ON COMPRESSOR STABILITY. American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 19. pp. 11-21.

1983

Dawes, WN (1983) Efficient implicit algorithm for the equations of 2-D viscous compressible flow: application to shock-boundary layer interaction. International Journal of Heat and Fluid Flow, 4. ISSN 0142-727X

Dawes, WN and Richards, PH (1983) A comparison of experimental and numericalresults obtained for the secondary flow in a large turbine cascade. Journal of Physics D: Applied Physics, 16. pp. 539-551. ISSN 0022-3727

HODSON, HP (1983) BOUNDARY-LAYER AND LOSS MEASUREMENTS ON THE ROTOR OF AN AXIAL-FLOW TURBINE. MECH ENG, 105. p. 80. ISSN 0025-6501

Hodson, HP (1983) The detection of boundary layer transition and separation in high speed turbine cascades. In: 7th International Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, 21-9-1983 to 23-9-1983, Aachen, Germany.

Hodson, HP (1983) The development of unsteady boundary layers on the rotor of an axial-flow turbine. In: Viscous Effects in Turbomachines. Advisory Group for Aeronautical Research and Development (AGARD). ISBN 9283503406

1982

Dawes, WN and Squire, LC (1982) A study of shock waves in three-dimensional transonic flow. Transactions of the ASME Journal of Fluids Engineering, 104. pp. 393-399. ISSN 0098-2202

1978

Day, IJ and Cumpsty, NA (1978) The measurement and interpretation of flow within rotating stall cells in axial compressors. Proceedings of the Institution of Mechanical Engineers. Part C, Journal of Mechanical Engineering Sciences, 20. ISSN 0954-4062

Day, IJ and Greitzer, EM and Cumpsty, NA (1978) Prediction of compressor performance in rotating stall. Transactions of the ASME, Journal of Engineering for Power, 100. pp. 1-14. ISSN 0022-0825

1977

DAY, IJ and GREITZER, EM and CUMPSTY, NA (1977) PREDICTION OF COMPRESSOR PERFORMANCE IN ROTATING STALL. MECH ENG, 99. p. 93. ISSN 0025-6501

1974

Bindon, JP and Day, IJ (1974) Experimental evaluation of a streamline - curvature method for flared subsonic cascade and for transonic cascades. Proceedings of the Institution of Mechanical Engineers, Journal of Heat and Fluid Flow, 4. ISSN 0046-7138

NULL

UNSPECIFIED Sensor probe. WO0120344.

UNSPECIFIED COMPRESSOR BLADE. .

Collings, N and Massini, M and Hodson, HP and Miller, RJ A new Intermittent Aspirated Probe for the Measurement of Stagnation Quantities in High Temperature Gases. (Unpublished)

UNSPECIFIED Compressor inlet flow control means. GB2248885.

UNSPECIFIED Flow control method and means. US5275528.

UNSPECIFIED Flow control method and means. EP0543908.

UNSPECIFIED A combustion chamber. EP1260768.

UNSPECIFIED Flow control method and means. US5340271.

Giacche, D and Xu, L and Coupland, J Multi-Disciplinary Multi-Objective Optimisation of Bypass OGV for Low Interaction Noise. In: 32nd AIAA Aeroacoustics Conference, 5-6-2011 to 8-6-2011, Portland, Oregon, USA. (Unpublished)

Giacche, D and Xu, L and Coupland, J and Wilson, A Comparison between Postprocessing Methods Applied to Rotor-Stator-Interaction Tone-Noise Problems. AIAA Journal, 49. (Unpublished)

Hazby, H and Xu, L Effects of the Blade Tip Loading on the Operating Range of a Transonic Impeller. In: XIX ISABE, 2009, -- to --, Montreal, Canada. (Unpublished)

Hazby, H and Xu, L Numerical investigation of the effects of leading edge in a small transonic impeller. In: European Turbomachinery Conference, 23-7-2009 to 27-9-2009, Glaz, Austria. (Unpublished)

Hazby, H and Xu, L Role of Tip Leakage in Stall of a Transonic Centrifugal Impeller. In: IGTI Gas Turbine Expo 2009, 8-6-2009 to 12-6-2009, Orlando, Florida, USA pp. 1245-1253.. (Unpublished)

Hazby, H and Xu, L and Shleer, M Study of the Flow in a Vaneless Diffuser at Part Speed Operating Conditions. In: IGTI Gas Turbine Expo 2010, 14-6-2010 to 18-6-2010, Glasgow, UK. (Unpublished)

Jefferson-Loveday, RJ and Tucker, PG and Eastwood, SJ and Xia, H and Tyacke J, and Liu, Y Hybrid LES Approach for Practical Turbomachinery Flows: Part 1 – Hierarchy and Example Simulations. Journal of Turbomachinery. (Unpublished)

Lam, YHB and Klus, P and Lam, S and Pullan, G and Yeo, GSH BarraCUDA – a Fast Sequence Mapping Software using Graphics Processing Units. In: UKGPU Conference 2011, 14-12-2011 to 14-12-2011, Goodenough College. (Unpublished)

Lintz, A and Karakasis, M and Xu, L Assessment of different Optimisation Targets for the Design of Non-axisymmetric Profiled End-walls for Axial Turbines. In: the 10th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows, 4-7-2011 to 7-7-2011, Brussels, Belgium. (Unpublished)

Long, CA and Tucker, PG Shroud heat transfer measurements from a rotating cavity with an axial throughflow of air. ASME J. Turbomach., Vol. 116, pp. 525-534. ASME J. Turbomach., 116. 525-. (Unpublished)

Rosic, B and Xu, L Blade Lean and Shroud Leakage Flows in Low Aspect Ratio Turbines. ASME J. Turbomachinery, 134. (Unpublished)

UNSPECIFIED Combustion chamber. US2003145576.

UNSPECIFIED A combustion chamber. EP1108957.

Tucker, PG NAFEMS. Int. J. of CFD Case Studies, 1. (Unpublished)

Tucker, PG Assessment of geometric multilevel convergence and a wall distance method for flows with multiple internal boundaries. Applied Mathematical Modelling, 22. pp. 293-311. (Unpublished)

Tucker, PG Computational Mechanics in Engineering. In: National CConference on Computational Mechanics in Engineering, --2010 to --, Southampton. (Unpublished)

Tucker, PG LES in turbomachinery. In: NUMECA, --2010 to --, Nuremburg. (Unpublished)

Tucker, PG Simulation of Wing and Nacelle Stall. In: Joint Symposium for DFG FOR 1066 and DLR-Airbus C2A2S2E, -- to --, Braunschweig. (Unpublished)

Tucker, PG URANS computations for a complex internal isothermal flow. In: ECCOMAS CFD, --2001 to --, Swansea. (Unpublished)

Tucker, PG and Adair, D Efficient modelling of rotating disks and cylinders using a Cartesian grid. Applied Mathematical Modelling, 21. pp. 749-762. (Unpublished)

Tucker, PG and Keogh, PS On the dynamic thermal state in a hydrodynamic bearing with a whirling journal using CFD techniques,. Journal of Tribology-Transactions of the ASME, 118. pp. 356-363. (Unpublished)

Tucker, PG and Keogh, PS A generalised CFD approach for journal bearing performance prediction. Journal for Enginnering Tribology, 209. pp. 99-108. (Unpublished)

Tucker, PG and Long, CA and Morse, AP Measurement and computation of heat transfer in high-pressure compressor drum geometries with axial throughflow. ASME Journal of Turbomachinery, 119. pp. 51-60. (Unpublished)

Tucker, PG and Long, CA and Tucker, PG Long C. A. and TUCKER P. G. 1994. Numerical computation of laminar flow in a heated rotating cavity with an axial throughflow of air. Int. J. Num. Meth. Heat Fluid Flow, Vol. 4, No. 4, pp. 347-365, 4. 347-. (Unpublished)

Tucker, PG and Long CA, Second order finite volume jet stream computations. International Journal for Numerical Methods in Fluids, 6. pp. 39-50. (Unpublished)

Tucker, PG and Mosquera, A Introduction to grid and mesh generation for CFD. NAFEMS. (Unpublished)

Tucker, PG and Mosquera, A and Butler, M and Smith, G and Iacovides, H and Rose, A and Simpson, B Laminar and Turbulent two dimensional internal flows. NAFEMS. (Unpublished)

Tucker, PG and Xia, H Chevron jet LES status. In: 48th AIAA, -- to --, Orlando. (Unpublished)

Tucker, PG and Xia, H Use of differential equations for hexahedral mesh generation. In: CFMS Workshop on MEdial Axis Technology, --2009 to --, Swansea. (Unpublished)

Wagner, C and Huttl, T and Sagaut, P Large eddy simulations for acoustics. Journal of Fluid Mechanics, 593. pp. 505-507. (Unpublished)

UNSPECIFIED Compressor head. WO2004044423.

UNSPECIFIED Part casing circumference flow control arrangement. doi:.

Zamboni, G and Xu, L Fan Root Aerodynamics For Large Bypass Gas Turbine Engines: Influence on the Engine Performance and 3D Design. In: IGTI Gas Turbine Expo 2009, 8-6-2009 to 12-6-2009, Orlando, Florida, USA. (Unpublished)