Research group publications - Materials Engineering

Jump to: 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 | 1989 | 1988 | 1987 | 1986 | 1985 | 1984 | 1983 | 1982 | 1981 | 1980 | 1979 | 1978 | 1977 | 1976 | 1975 | 1974 | 1973 | 1972 | 1971 | 1969 | NULL

Number of items: 2124.

2013

Mackay, RE and Le, HR and Clark, S and Williams, JA (2013) Polymer micro-grippers with an integrated force sensor for biological manipulation. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 23. ISSN 0960-1317

Wadley, HNG and Borvik, T and Olovsson, L and Wetzel, JJ and Dharmasena, KP and Hopperstad, OS and Deshpande, VS and Hutchinson, JW (2013) Deformation and fracture of impulsively loaded sandwich panels. Journal of the Mechanics and Physics of Solids, 61. pp. 674-699. ISSN 0022-5096

2012

Agrawal, DK and Woodhouse, J and Seshia, AA (2012) Modelling non-linearities in a MEMS square wave oscillator. 2012 IEEE International Frequency Control Symposium, IFCS 2012, Proceedings. pp. 260-265.

Armitage, OE and Strange, DGT and Oyen, ML (2012) Biomimetic calcium carbonate-gelatin composites as a model system for eggshell mineralization. Journal of Materials Research, 27. pp. 3157-3164. ISSN 0884-2914

Ayas, C and Deshpande, VS and Geers, MGD (2012) Tensile response of passivated films with climb-assisted dislocation glide. Journal of the Mechanics and Physics of Solids. ISSN 0022-5096

Ayas, C and Deshpande, VS and Geers, MGD (2012) Tensile response of passivated films with climb-assisted dislocation glide. Journal of the Mechanics and Physics of Solids, 60. pp. 1626-1643. ISSN 0022-5096

Bartók, AP and Kondor, R and Csányi, G (2012) On representing chemical environments.

Bernstein, N and Várnai, C and Solt, I and Winfield, SA and Payne, MC and Simon, I and Fuxreiter, M and Csányi, G (2012) QM/MM simulation of liquid water with an adaptive quantum region. Phys Chem Chem Phys, 14. pp. 646-656.

Bigoni, D and Misseroni, D and Noselli, G and Zaccaria, D (2012) Effects of constraint curvature on structural instability: tensile buckling and multiple bifurcations.

Cardwell, DA and Amemiya, N and Fair, R (2012) Focus section on superconducting power systems PREFACE. SUPERCOND SCI TECH, 25. -. ISSN 0953-2048

Chen, DX and Shi, YH and Navau, C and Sanchez, A and Cardwell, DA (2012) Alternating-current susceptibility and critical-current density of melt-processed Gd-Ba-Cu-O-Ag single grains: effect of intrinsic edge pinning. SUPERCOND SCI TECH, 25. -. ISSN 0953-2048

Csanyi, G and Domokos, G (2012) Nonsmooth geometry and collapse of flexible structures under smooth loads.

Danas, K and Deshpande, VS and Fleck, NA (2012) Size effects in the conical indentation of an elasto-plastic solid. Journal of the Mechanics and Physics of Solids. ISSN 0022-5096

Danas, K and Deshpande, VS and Fleck, NA (2012) Size effects in the conical indentation of an elasto-plastic solid. Journal of the Mechanics and Physics of Solids, 60. pp. 1605-1625. ISSN 0022-5096

Dirks, JH and Li, M and Kabla, A and Federle, W (2012) In vivo dynamics of the internal fibrous structure in smooth adhesive pads of insects. Acta Biomater, 8. pp. 2730-2736.

Dowling, EP and Ronan, W and Ofek, G and Deshpande, VS and McMeeking, RM and Athanasiou, KA and McGarry, JP (2012) The effect of remodelling and contractility of the actin cytoskeleton on the shear resistance of single cells: a computational and experimental investigation. J R Soc Interface, 9. pp. 3469-3479.

Durrell, JH and Dancer, CEJ and Dennis, A and Shi, Y and Xu, Z and Campbell, AM and Hari Babu, N and Todd, RI and Grovenor, CRM and Cardwell, DA (2012) A trapped field of > 3T in bulk MgB₂ fabricated by uniaxial hot pressing. Superconductor Science and Technology, 25. ISSN 0953-2048

Erbes, A and Thiruvenkatanathan, P and Seshia, AA (2012) Impact of mode localization on the motional resistance of coupled MEMS resonators. 2012 IEEE International Frequency Control Symposium, IFCS 2012, Proceedings. pp. 349-354.

Finnemore, A and Cunha, P and Shean, T and Vignolini, S and Guldin, S and Oyen, M and Steiner, U (2012) Biomimetic layer-by-layer assembly of artificial nacre. Nat Commun, 3. 966-.

Foolen, J and Deshpande, VS and Baaijens, FPT (2012) Stress-fiber remodeling in 3D: 'contact guidance vs stretch avoidance'. JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE, 6. pp. 237-238. ISSN 1932-6254

Foolen, J and Deshpande, VS and Kanters, FM and Baaijens, FP (2012) The influence of matrix integrity on stress-fiber remodeling in 3D. Biomaterials, 33. pp. 7508-7518.

Foolen, J and Deshpande, VS and Kanters, FMW and Baaijens, FPT (2012) The influence of matrix integrity on stress-fiber remodeling in 3D. Biomaterials, 33. pp. 7508-7518. ISSN 0142-9612

Hari Babu, N and Jackson, KP and Dennis, AR and Shi, YH and Mancini, C and Durrell, JH and Cardwell, DA (2012) Growth of large sized y Ba 2Cu 3O 7 single crystals using the top seeded melt growth process. Superconductor Science and Technology, 25. ISSN 0953-2048

Harris, AR and Peter, L and Bellis, J and Baum, B and Kabla, AJ and Charras, GT (2012) Characterizing the mechanics of cultured cell monolayers. Proc Natl Acad Sci U S A, 109. pp. 16449-16454.

Kabla, AJ (2012) Collective Cell Migration: Leadership, Invasion and Segregation. Journal of the Royal Society Interface.

Kazemahvazi, S and Russell, BP and Zenkert, D (2012) Impact of carbon fibre/epoxy corrugated cores. Composite Structures. ISSN 0263-8223

Kazemahvazi, S and Russell, BP and Zenkert, D (2012) Impact of carbon fibre/epoxy corrugated cores. Composite Structures, 94. pp. 3300-3308. ISSN 0263-8223

Khaderbad, MA and Choi, Y and Hiralal, P and Aziz, A and Wang, N and Durkan, C and Thiruvenkatanathan, P and Amaratunga, GA and Rao, VR and Seshia, AA (2012) Electrical actuation and readout in a nanoelectromechanical resonator based on a laterally suspended zinc oxide nanowire. Nanotechnology, 23. 025501-.

Koh, CT and Oyen, ML (2012) Branching toughens fibrous networks. J Mech Behav Biomed Mater, 12. pp. 74-82.

Koh, CT and Oyen, ML (2012) Fracture toughness of fibrous membranes. Technische Mechanik, 32. pp. 333-341. ISSN 0232-3869

Le, HR and Howson, A and Ramanauskas, M and Williams, JA (2012) Tribological Characterisation of Air-Sprayed Epoxy-CNT Nanocomposite Coatings. TRIBOL LETT, 45. pp. 301-308. ISSN 1023-8883

Lemanski, SL and Sutcliffe, MPF (2012) Compressive failure of finite size unidirectional composite laminates with a region of fibre waviness. Composites Part A: Applied Science and Manufacturing, 43. pp. 435-444. ISSN 1359-835X

Lin, ATH and Yan, JZ and Seshia, AA (2012) Electrically Addressed Dual Resonator Sensing Platform for Biochemical Detection. J MICROELECTROMECH S, 21. pp. 34-43. ISSN 1057-7157

Lin, WC and Lin, YC and Shih, CJ and Esashi, M and Seshia, AA (2012) Local synthesis and alignment of zinc oxide nanowires in aqueous solution using microheaters. Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS). pp. 452-455. ISSN 1084-6999

Liu, F and Sutcliffe, MPF and Graham, WR (2012) Prediction of tread block forces for a free-rolling tyre in contact with a rough road. Wear. ISSN 0043-1648

Liu, F and Sutcliffe, MPF and Graham, WR (2012) Prediction of tread block forces for a free-rolling tyre in contact with a rough road. Wear, 282-28. pp. 1-11. ISSN 0043-1648

Majidi, C and Oreilly, OM and Williams, JA (2012) On the stability of a rod adhering to a rigid surface: Shear-induced stable adhesion and the instability of peeling. Journal of the Mechanics and Physics of Solids, 60. pp. 827-843. ISSN 0022-5096

Malheiro, VN and Skepper, JN and Brooks, RA and Markaki, AE (2012) In vitro osteoblast response to ferritic stainless steel fiber networks for magneto-active layers on implants. J Biomed Mater Res A.

Marchal, C and Fagnard, JF and Shi, YH and Cardwell, DA and Mucha, J and Misiorek, H and Cloots, R and Vertruyen, B and Vanderbemden, P (2012) The influence of a grain boundary on the thermal transport properties of bulk, melt-processed Y-Ba-Cu-O. Superconductor Science and Technology, 26. ISSN 0953-2048

McMillan, AJ and Monroy Aceves, C and Sutcliffe, MPF (2012) Moderate energy impact analysis combining phenomenological contact law with localised damage and integral equation method. International Journal of Impact Engineering, 43. pp. 29-39. ISSN 0734-743X

McShane, GJ and Pingle, SM and Deshpande, VS and Fleck, NA (2012) Dynamic buckling of an inclined strut. International Journal of Solids and Structures, 49. pp. 2830-2838. ISSN 0020-7683

McShane, GJ and Pingle, SM and Deshpande, VS and Fleck, NA (2012) Dynamic buckling of an inclined strut. International Journal of Solids and Structures. ISSN 0020-7683

Mikheenko, P and Yurchenko, VV and Cardwell, DA and Shi, YH and Johansen, TH (2012) Magneto-Optical Imaging of Superconductors for Liquid Hydrogen Applications. Journal of Superconductivity and Novel Magnetism. pp. 1-4. ISSN 1557-1939

Mones, L and Csányi, G (2012) Topologically invariant reaction coordinates for simulating multistate chemical reactions. J Phys Chem B, 116. pp. 14876-14885.

Monroy Aceves, C and Sutcliffe, MPF and Ashby, MF and Skordos, AA and Rodríguez Román, C (2012) Design methodology for composite structures: A small low air-speed wind turbine blade case study. Materials and Design, 36. pp. 296-305. ISSN 0261-3069

Oyen, ML and Shean, TAV and Strange, DGT and Galli, M (2012) Size effects in indentation of hydrated biological tissues. Journal of Materials Research, 27. pp. 245-255. ISSN 0884-2914

Park, S and Russell, BP and Deshpande, VS and Fleck, NA (2012) Dynamic compressive response of composite square honeycombs. Composites Part A: Applied Science and Manufacturing, 43. pp. 527-536. ISSN 1359-835X

Patel, A and Pałka, R and Glowacki, BA and Giunchi, G and Figini Albisetti, A and Shi, Y and Cardwell, DA and Hopkins, SC (2012) Permanent Magnet Enhancement of Fully Superconducting MgB2-YBa2Cu3O7-x Bearing. Journal of Superconductivity and Novel Magnetism. pp. 1-7. ISSN 1557-1939

Pingle, SM and Fleck, NA and Wadley, HNG and Deshpande, VS (2012) Discrete element calculations of the impact of a sand column against rigid structures. International Journal of Impact Engineering. ISSN 0734-743X

Puica, I and Lang, W and Durrell, JH (2012) High velocity vortex channeling in vicinal YBCO thin films. Physica C: Superconductivity and its Applications, 479. pp. 88-91. ISSN 0921-4534

Pártay, LB and Bartók, AP and Csányi, G (2012) On the thermodynamics of hard spheres.

Rodriguez-Florez, N and Oyen, ML and Shefelbine, SJ (2012) Insight into differences in nanoindentation properties of bone. J Mech Behav Biomed Mater, 18C. pp. 90-99.

Ronan, W and Deshpande, VS and McMeeking, RM and McGarry, JP (2012) Numerical investigation of the active role of the actin cytoskeleton in the compression resistance of cells. J Mech Behav Biomed Mater, 14. pp. 143-157.

Russell, BP and Liu, T and Fleck, NA and Deshpande, VS (2012) The soft impact of composite sandwich beams with a square-honeycomb core. International Journal of Impact Engineering, 48. pp. 65-81. ISSN 0734-743X

Saadatfar, M and Sheppard, AP and Senden, TJ and Kabla, AJ (2012) Mapping forces in a 3D elastic assembly of grains. Journal of the Mechanics and Physics of Solids, 60. pp. 55-66. ISSN 0022-5096

Shi, Y and Durrell, JH and Dennis, AR and Babu, NH and Mancini, CE and Cardwell, DA (2012) Properties of grain boundaries in bulk, melt processed YB2Cu3O7-δ fabricated using bridge-shaped seeds. Superconductor Science and Technology, 25. 045006-045006. ISSN 0953-2048

Shi, Y and Hasan, T and Babu, NH and Torrisi, F and Milana, S and Ferrari, AC and Cardwell, DA (2012) Synthesis of YBa(2)Cu(3)O(7-δ) and Y(2)BaCuO(5) Nanocrystalline Powders for YBCO Superconductors Using Carbon Nanotube Templates. ACS Nano, 6. pp. 5395-5403.

Shi, Y-H and Durrell, JH and Dennis, AR and Cardwell, DA (2012) Bulk YBCO seeded with 45°-45°bridge-seeds of different lengths. Superconductor Science and Technology, 26. ISSN 0953-2048

Spear, RL and Brooks, RA and Markaki, AE (2012) Short-term in vitro responses of human peripheral blood monocytes to ferritic stainless steel fiber networks. J Biomed Mater Res A.

St-Pierre, L and Fleck, NA and Deshpande, VS (2012) Sandwich Beams With Corrugated and Y-frame Cores: Does the Back Face Contribute to the Bending Response? In: UNSPECIFIED -..

Stewart, F and Le, HR and Williams, JA and Leech, A and Bezensek, B and Roberts, A (2012) Characterisation of friction and lubrication regimes in premium tubular connections. Tribology International, 53. pp. 159-166. ISSN 0301-679X

Strange, DGT and Oyen, ML (2012) Composite hydrogels for nucleus pulposus tissue engineering. Journal of the Mechanical Behavior of Biomedical Materials, 11. pp. 16-26. ISSN 1751-6161

Sutcliffe, MPF and Lemanski, SL and Scott, AE (2012) Measurement of fibre waviness in industrial composite components. COMPOSITES SCIENCE AND TECHNOLOGY, 72. pp. 2016-2023. ISSN 0266-3538

Sutcliffe, MPF and Monroy Aceves, C and Stronge, WJ and Choudhry, RS and Scott, AE (2012) Moderate speed impact damage to 2D-braided glass-carbon composites. Composite Structures, 94. pp. 1781-1792. ISSN 0263-8223

Thiruvenkatanathan, P and Seshia, AA (2012) Mode-localized displacement sensing. Journal of Microelectromechanical Systems, 21. pp. 1016-1018. ISSN 1057-7157

Thiruvenkatanathan, P and Seshia, AA (2012) Mode-Localized Displacement Sensing. Journal of Microelectromechanical Systems. ISSN 1057-7157

Trappmann, B and Gautrot, JE and Connelly, JT and Strange, DG and Li, Y and Oyen, ML and Cohen Stuart, MA and Boehm, H and Li, B and Vogel, V and Spatz, JP and Watt, FM and Huck, WT (2012) Extracellular-matrix tethering regulates stem-cell fate. Nat Mater, 11. 742-. ISSN 1476-1122

Trappmann, B and Gautrot, JE and Connelly, JT and Strange, DGT and Li, Y and Oyen, ML and Cohen Stuart, MA and Boehm, H and Li, B and Vogel, V and Spatz, JP and Watt, FM and Huck, WTS (2012) Erratum: Extracellular-matrix tethering regulates stem-cell fate (Nature Materials (2012) 11 (642-649)). Nature Materials, 11. p. 742. ISSN 1476-1122

Trappmann, B and Gautrot, JE and Connelly, JT and Strange, DGT and Li, Y and Oyen, ML and Cohen Stuart, MA and Boehm, H and Li, B and Vogel, V and Spatz, JP and Watt, FM and Huck, WTS (2012) Extracellular-matrix tethering regulates stem-cell fate. Nature Materials, 11. pp. 642-649. ISSN 1476-1122

Vanleene, M and Porter, A and Guillot, PV and Boyde, A and Oyen, M and Shefelbine, S (2012) Ultra-structural defects cause low bone matrix stiffness despite high mineralization in osteogenesis imperfecta mice. Bone, 50. pp. 1317-1323.

Vedula, SR and Leong, MC and Lai, TL and Hersen, P and Kabla, AJ and Lim, CT and Ladoux, B (2012) Emerging modes of collective cell migration induced by geometrical constraints. Proc Natl Acad Sci U S A, 109. pp. 12974-12979.

Wadley, HNG and Børvik, T and Olovsson, L and Wetzel, JJ and Dharmasena, KP and Hopperstad, OS and Deshpande, VS and Hutchinson, JW (2012) Deformation and fracture of impulsively loaded sandwich panels. Journal of the Mechanics and Physics of Solids. ISSN 0022-5096

Wang, B and Deshpande, VS and Langseth, M (2012) Special issue on advances in impact mechanics in honour of Professor Steve Reid Foreword. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 48. p. 1. ISSN 0734-743X

Williams, JA and Kauzlarich, JJ (2012) Dwell time effect in peeling PSA laminates. Journal of Adhesion, 88. pp. 831-847. ISSN 0021-8464

Xu, Z and Lewin, R and Campbell, AM and Cardwell, DA and Jones, H (2012) Simulation studies on the magnetization of (RE)BCO bulk superconductors using various split-coil arrangements. Superconductor Science and Technology, 25. ISSN 0953-2048

Zou, X and Thiruvenkatanathan, P and Seshia, AA (2012) Micro-electro-mechanical resonant tilt sensor. 2012 IEEE International Frequency Control Symposium, IFCS 2012, Proceedings. pp. 744-747.

2011

Agrawal, DK and Thiruvenkatanathan, P and Yan, JZ and Seshia, AA (2011) Electrically coupled MEMS Oscillators. In: UNSPECIFIED pp. 169-173..

Babu, NH and Shi, Y-H and Dennis, AR and Pathak, SK and Cardwell, DA (2011) Seeded infiltration and growth of bulk YBCO nano-composites. IEEE Transactions on Applied Superconductivity, 21. pp. 2698-2701. ISSN 1051-8223

Babu, NH and Shi, YH and Dennis, AR and Pathak, SK and Cardwell, DA (2011) Seeded Infiltration and Growth of Bulk YBCO Nano-Composites. IEEE T APPL SUPERCON, 21. pp. 2698-2701. ISSN 1051-8223

Babu, NH and Shi, YH and Pathak, SK and Dennis, AR and Cardwell, DA (2011) Developments in the processing of bulk (RE)BCO superconductors. PHYSICA C, 471. pp. 169-178. ISSN 0921-4534

Bell, LL and Seshia, AA and Laue, ED and Lando, D (2011) A microfluidic device for high density hydrodynamic cell trapping, growth and super-resolution imaging. Proceedings of IEEE Sensors. pp. 304-307.

Bigoni, D and Noselli, G (2011) Experimental evidence of flutter and divergence instabilities induced by dry friction. Journal of the Mechanics and Physics of Solids, 59. pp. 2208-2226. ISSN 0022-5096

Bizard, AF and Symons, DD and Fleck, NA and Durban, D (2011) Flow of damp powder in a rotating impervious cone. Transactions of the ASME, Journal of Applied Mechanics, 78. 021017-. ISSN 0021-8936

Blamire, MG and Aziz, A and Robinson, JW (2011) Nanopillar junctions. Philos Transact A Math Phys Eng Sci, 369. pp. 3198-3213. ISSN 1364-503X

Bolognini, F and Shea, K and Seshia, AA (2011) Advanced applications of a computational design synthesis method. ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design, 9. pp. 367-376.

Brewer, BJ and Partay, LB and Csanyi, G (2011) Diffusive nested sampling. STAT COMPUT, 21. pp. 649-656. ISSN 0960-3174

Clem, JR and Weigand, M and Durrell, JH and Campbell, AM (2011) Theory and experiment testing flux-line cutting physics. Superconductor Science and Technology, 24. 062002-. ISSN 0953-2048

Deshpande, VS and Gamble, EAN and Compton, BG and McMeeking, RM and Evans, AG and Zok, FW (2011) A constitutive description of the inelastic response of ceramics. Journal of the American Ceramic Society, 94. S204-S214. ISSN 0002-7820

Deshpande, VS and Gamble, EAN and Compton, BG and Mcmeeking, RM and Evans, AG and Zok, FW (2011) A Constitutive Description of the Inelastic Response of Ceramics. Journal of the American Ceramic Society. ISSN 1551-2916

Durrell, JH and Eom, CB and Gurevich, A and Hellstrom, EE and Tarantini, C and Yamamoto, A and Larbalestier, DC (2011) The behavior of grain boundaries in the Fe-based superconductors. REP PROG PHYS, 74. -. ISSN 0034-4885

Ferri, M and Belsito, L and Mancarella, F and Masini, L and Roncaglia, A and Yan, J and Seshia, AA and Zalesky, J and Soga, K (2011) Fabrication and testing of a high resolution extensometer based on resonant MEMS strain sensors. In: UNSPECIFIED pp. 1056-1059..

Galli, M and Fornasiere, E and Cugnoni, J and Oyen, ML (2011) Poroviscoelastic characterization of particle-reinforced gelatin gels using indentation and homogenization. J Mech Behav Biomed Mater, 4. pp. 610-617.

Gamble, EA and Compton, BG and Deshpande, VS and Evans, AG and Zok, FW (2011) Damage Development in an Armor Ceramic Under Quasi-Static Indentation. Journal of the American Ceramic Society. ISSN 1551-2916

Gamble, EA and Compton, BG and Deshpande, VS and Evans, AG and Zok, FW (2011) Damage development in an armor ceramic under quasi-static indentation. Journal of the American Ceramic Society, 94. S215-S225. ISSN 0002-7820

Ghosh, SK and Ostanin, VP and Johnson, CL and Lowe, CR and Seshia, AA (2011) Probing biomolecular interaction forces using an anharmonic acoustic technique for selective detection of bacterial spores. Biosensors and Bioelectronics, 29. pp. 145-150. ISSN 0956-5663

Ghosh, SK and Ostanin, VP and Seshia, AA (2011) Anharmonic surface interactions for biomolecular screening and characterization. Anal Chem, 83. pp. 549-554.

Graham, WR and Liu, F and Sutcliffe, MPF and Dale, M (2011) Characterisation and simulation of asphalt road surfaces. WEAR, 271. pp. 734-747. ISSN 0043-1648

Headings, NS and Hayden, SM and Kulda, J and Babu, NH and Cardwell, DA (2011) Spin anisotropy of the magnetic excitations in the normal and superconducting states of optimally doped YBa2Cu3O6.9 studied by polarized neutron spectroscopy. PHYS REV B, 84. -. ISSN 1098-0121

Kiessling, A and Hanisch, J and Thersleff, T and Reich, E and Weigand, M and Huhne, R and Sparing, M and Holzapfel, B and Durrell, JH and Schultz, L (2011) Nanocolumns in YBa2Cu3O7-x/BaZrO3 quasi-multilayers: formation and influence on superconducting properties. SUPERCOND SCI TECH, 24. -. ISSN 0953-2048

Lee, JE-Y and Seshia, AA (2011) Direct parameter extraction in feedthrough-embedded capacitive MEMS resonators. Sensors and Actuators, A: Physical, 167. pp. 237-244. ISSN 0924-4247

Lee, JE-Y and Yan, J and Seshia, AA (2011) Study of lateral mode SOI-MEMS resonators for reduced anchor loss. Journal of Micromechanics and Microengineering, 21. ISSN 0960-1317

Lemanski, SL and Sutcliffe, MPF (2011) Compressive failure of finite size unidirectional composite laminates with a region of fibre waviness. Composites Part A: Applied Science and Manufacturing, 43. pp. 435-444. ISSN 1359-835X

Lin, W and Seshia, AA and Wu, C-C and Lin, Y-C (2011) Catalyst-free synthesis of zinc oxide nanostructures by microheaters in the ambient environment. In: UNSPECIFIED pp. 897-900..

Malheiro, VN and Spear, RL and Brooks, RA and Markaki, AE (2011) Osteoblast and monocyte responses to 444 ferritic stainless steel intended for a Magneto-Mechanically Actuated Fibrous Scaffold. Biomaterials, 32. pp. 6883-6892. ISSN 0142-9612

Menzel, A and Lin, AT-H and Estrela, P and Li, P and Seshia, AA (2011) Biomolecular and electrochemical charge detection by a micromechanical electrometer. Sensors and Actuators, B: Chemical. ISSN 0925-4005

Mohagheghian, I and McShane, GJ and Stronge, WJ (2011) Impact response of polyethylene nanocomposites. Procedia Engineering, 10. pp. 704-709. ISSN 1877-7058

Mohagheghian, I and McShane, GJ and Stronge, WJ (2011) Impact response of polyethylene nanocomposites. In: UNSPECIFIED -..

Moseler, M and Cervantes-Sodi, F and Klemenz, A and Hofmann, S and Csanyi, G and Ferrari, AC (2011) Reply to "Comment on 'Dynamic Catalyst Restructuring during Carbon Nanotube Growth'". ACS NANO, 5. pp. 686-687. ISSN 1936-0851

Nachum, S and Fleck, NA (2011) The microstructure and mechanical properties of ball-milled stainless steel powder: The effect of hot-pressing vs. laser sintering. Acta Materialia, 59. pp. 7300-7310. ISSN 1359-6454

Oyen, ML (2011) Nanoindentation of Biological and Biomimetic Materials. Experimental Techniques. ISSN 0732-8818

Park, S and Russell, BP and Deshpande, VS and Fleck, NA (2011) Dynamic compressive response of composite square honeycombs. Composites Part A: Applied Science and Manufacturing. ISSN 1359-835X

Pathak, A and McMeeking, RM and Evans, AG and Deshpande, VS (2011) An analysis of the cooperative mechano-sensitive feedback between intracellular signaling, focal adhesion development, and stress fiber contractility. Journal of Applied Mechanics, Transactions ASME, 78. ISSN 0021-8936

Pemberton, SR and Oberg, EK and Dean, J and Tsarouchas, D and Markaki, AE and Marston, L and Clyne, TW (2011) The fracture energy of metal fibre reinforced ceramic composites (MFCs). Composites Science and Technology, 71. pp. 266-275. ISSN 0266-3538

Pingle, SM and Fleck, NA and Deshpande, VS and Wadley, HNG (2011) Collapse mechanism maps for a hollow pyramidal lattice. P ROY SOC A-MATH PHY, 467. pp. 985-1011. ISSN 1364-5021

Pingle, SM and Fleck, NA and Deshpande, VS and Wadley, HNG (2011) Collapse mechanism maps for the hollow pyramidal core of a sandwich panel under transverse shear. International Journal of Solids and Structures. ISSN 0020-7683

Qiang, B and Greenleaf, J and Oyen, M and Zhang, X (2011) Estimating material elasticity by spherical indentation load-relaxation tests on viscoelastic samples of finite thickness. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 58. pp. 1418-1429. ISSN 0885-3010

Robinson, HJ and Markaki, AE and Collier, CA and Clyne, TW (2011) Cell adhesion to plasma electrolytic oxidation (PEO) titania coatings, assessed using a centrifuging technique. J Mech Behav Biomed Mater, 4. pp. 2103-2112.

Russell, BP and Liu, T and Fleck, NA and Deshpande, VS (2011) Quasi-static three-point bending of carbon fiber sandwich beams with square honeycomb cores. Journal of Applied Mechanics, Transactions ASME, 78. ISSN 0021-8936

Russell, BP and Liu, T and Fleck, NA and Deshpande, VS (2011) The soft impact of composite sandwich beams with a square-honeycomb core. International Journal of Impact Engineering. ISSN 0734-743X

Shi, Y and Dennis, AR and Cardwell, DA (2011) Microstructure and superconducting properties of single grains of Y-Ba-Cu-O containing Y-2411(M) and Y 2O 3. IEEE Transactions on Applied Superconductivity, 21. pp. 1576-1578. ISSN 1051-8223

Shi, Y and Dennis, AR and Cardwell, DA (2011) Microstructure and Superconducting Properties of Single Grains of Y-Ba-Cu-O Containing Y-2411(M) and Y2O3. IEEE T APPL SUPERCON, 21. pp. 1576-1578. ISSN 1051-8223

Shi, Y and Dennis, AR and Hengstberger, F and Babu, NH and Cardwell, DA and Strasik, M (2011) A simple method for recycling GdBCO-Ag single grain bulk superconductors. SUPERCOND SCI TECH, 24. -. ISSN 0953-2048

Strange, DG and Oyen, ML (2011) Biomimetic bone-like composites fabricated through an automated alternate soaking process. Acta Biomater, 7. pp. 3586-3594.

Strange, DGT and Oyen, ML (2011) Composite hydrogels for nucleus pulposus tissue engineering. Journal of the Mechanical Behavior of Biomedical Materials. ISSN 1751-6161

Tagarielli, VL and Fleck, NA (2011) The Shear Response of a Thin Aluminum Layer. J APPL MECH-T ASME, 78. -. ISSN 0021-8936

Tagarielli, VL and Fleck, NA and Colella, A and Matteazzi, P (2011) Mechanical properties and deformation mechanisms of nanocrystalline Fe/Cu 60/40 composites. J MATER SCI, 46. pp. 385-393. ISSN 0022-2461

Thiruvenkatanathan, P and Woodhouse, J and Yan, J and Seshia, AA (2011) Limits to mode-localized sensing using micro- and nanomechanical resonator arrays. JOURNAL OF APPLIED PHYSICS, 109. -. ISSN 0021-8979

Thiruvenkatanathan, P and Woodhouse, J and Yan, J and Seshia, AA (2011) Manipulating vibration energy confinement in electrically coupled microelectromechanical resonator arrays. Journal of Microelectromechanical Systems, 20. pp. 157-164. ISSN 1057-7157

Tsarouchas, D and Markaki, AE (2011) Extraction of fibre network architecture by X-ray tomography and prediction of elastic properties using an affine analytical model. Acta Materialia, 59. pp. 6989-7002. ISSN 1359-6454

Vanleene, M and Saldanha, Z and Cloyd, KL and Jell, G and Bou-Gharios, G and Bassett, JH and Williams, GR and Fisk, NM and Oyen, ML and Stevens, MM and Guillot, PV and Shefelbine, SJ (2011) Transplantation of human fetal blood stem cells in the osteogenesis imperfecta mouse leads to improvement in multiscale tissue properties. Blood, 117. pp. 1053-1060.

Wang, M and Fleck, NA and Evans, AG (2011) Elastodynamic Erosion of Thermal Barrier Coatings. Journal of the American Ceramic Society. ISSN 1551-2916

Wang, M and Fleck, NA and Evans, AG (2011) Elastodynamic erosion of thermal barrier coatings. Journal of the American Ceramic Society, 94. S160-S167. ISSN 0002-7820

Weigand, M and Rutter, NA and Sahonta, S-L and Durrell, JH (2011) Critical current densities of MOCVD tapes for different current directions. IEEE Transactions on Applied Superconductivity, 21. pp. 3347-3351. ISSN 1051-8223

Williams, JA and Kauzlarich, JJ (2011) Mandrel peeling of a flexible laminate with a pressure-sensitive adhesive: Comparison of experiment with numerical analysis. Strain, 47. pp. 439-448. ISSN 0039-2103

Wimbush, SC and Durrell, JH and Blamire, MG and MacManus-Driscoll, JL (2011) Strong Flux Pinning by Magnetic Interlayers Compatible With YBa2Cu3O7-delta. IEEE T APPL SUPERCON, 21. pp. 3159-3161. ISSN 1051-8223

Yungwirth, CJ and O'Connor, J and Zakraysek, A and Deshpande, VS and Wadley, HNG (2011) Explorations of Hybrid Sandwich Panel Concepts for Projectile Impact Mitigation. J AM CERAM SOC, 94. S62-S75. ISSN 0002-7820

Zaccaria, D and Bigoni, D and Noselli, G and Misseroni, D (2011) Structures buckling under tensile dead load. P ROY SOC A-MATH PHY, 467. pp. 1686-1700. ISSN 1364-5021

Zou, X and Yan, J and Seshia, AA (2011) Voltage programmable dual-band bandpass/bandstop filter response in a single micro-electro-mechanical device. In: UNSPECIFIED pp. 836-839..

2010

Cardwell, David Anthony, ed. (2010) PASREG: the 7th International Workshop on the Processing and Applications of Superconducting (RE)BCO Large Grain Materials, Washington DC, USA, 29-31 July 2010. IoP Publishing, 120301-.

Aceves, CM and McMillan, AJ and Sutcliffe, MPF and Stronge, WJ and Choudhry, RS and Care, ICD (2010) Low-Speed Impact Damage in Hybrid 2D-Braided Composite Plates. In: UNSPECIFIED pp. 306-313..

Bartok, AP and Payne, MC and Kondor, R and Csanyi, G (2010) Gaussian Approximation Potentials: The Accuracy of Quantum Mechanics, without the Electrons. PHYS REV LETT, 104. -. ISSN 0031-9007

Bartok, AP and Payne, MC and Risi, K and Csanyi, G (2010) Gaussian approximation potentials: the accuracy of quantum mechanics, without the electrons. Physical Review Letters, 104. 136403-. ISSN 0031-9007

Bell, L and Seshia, AA and Davidson, C and Lowe, CR (2010) Integration of holographic sensors into microfluidics for the real-time pH sensing of L Casei growth. In: 24th Surosensors conference, 5-9-2010 to 8-9-2010, Linz, Austria.

Bell, LL and Seshia, AA and Davidson, CAB and Lowe, CR (2010) Integration of holographic sensors into microfluidics for the real-time pH sensing of L. casei metabolism. Procedia Engineering, 5. pp. 1352-1355. ISSN 1877-7058

Bigoni, D and Noselli, G (2010) Localized stress percolation through dry masonry walls. Part I - Experiments. EUR J MECH A-SOLID, 29. pp. 291-298. ISSN 0997-7538

Bigoni, D and Noselli, G (2010) Localized stress percolation through dry masonry walls. Part II - Modelling. EUR J MECH A-SOLID, 29. pp. 299-307. ISSN 0997-7538

Bodea, MA and Pedarnig, JD and Withnell, TD and Weber, HW and Cardwell, DA and Hari Babu, N and Koblischka-Veneva, A (2010) Characterization of nano-composite M-2411/Y-123 thin films by electron backscatter diffraction and in-field critical current measurements. Journal of Physics: Conference Series, 234. ISSN 1742-6588

Cardwell, DA (2010) Recent progress in the processing and properties of bulk high temperature superconductors for high field engineering applications. Magnews, Autumn. 24-.

Cardwell, DA and Shi, YH and Hari Babu, N and Pathak, SK and Dennis, AR (2010) Top seeded melt growth of GdBCO bulk superconductors. Superconductor Science and Technology, 23. 034008-. ISSN 0953-2048

Cervantes-Sodi, F and McNicholas, TP and Simmons, JG and Liu, J and Csányi, G and Ferrari, AC and Curtarolo, S (2010) Viscous state effect on the activity of Fe nanocatalysts. ACS Nano, 4. pp. 6950-6956.

Chen, DX and Sanchez, A and Navau, C and Shi, YH and Cardwell, DA (2010) Axial and radial AC susceptibility measurements of melt-processed, single grain Y-BA-Cu-O discs. Superconductor Science and Technology, 23. 045010-. ISSN 0953-2048

Cocks, ACF and Fleck, NA (2010) Constrained sintering of an air-plasma-sprayed thermal barrier coating. ACTA MATER, 58. pp. 4233-4244. ISSN 1359-6454

Comley, K and Fleck, NA (2010) A micromechanical model for the Young's modulus of adipose tissue. INT J SOLIDS STRUCT, 47. pp. 2982-2990. ISSN 0020-7683

Comley, K and Fleck, NA (2010) The toughness of adipose tissue: measurements and physical basis. J Biomech, 43. pp. 1823-1826.

Curtin, WA and Deshpande, VS and Needleman, A and Van der Giessen, E and Wallin, M (2010) Hybrid discrete dislocation models for fatigue crack growth. INT J FATIGUE, 32. pp. 1511-1520. ISSN 0142-1123

Danas, K and Deshpande, VS and Fleck, NA (2010) Compliant interfaces: A mechanism for relaxation of dislocation pile-ups in a sheared single crystal. INT J PLASTICITY, 26. pp. 1792-1805. ISSN 0749-6419

Dharmasena, KP and Queheillalt, DT and Wadley, HNG and Dudt, P and Chen, Y and Knight, D and Evans, AG and Deshpande, VS (2010) Dynamic compression of metallic sandwich structures during planar impulsive loading in water. EUR J MECH A-SOLID, 29. pp. 56-67. ISSN 0997-7538

Evans, AG and He, MY and Deshpande, VS and Hutchinson, JW and Jacobsen, AJ and Carter, WB (2010) Concepts for enhanced energy absorption using hollow micro-lattices. INT J IMPACT ENG, 37. pp. 947-959. ISSN 0734-743X

Ferri, E and Deshpande, VS and Evans, AG (2010) The Dynamic Strength of a Representative Double Layer Prismatic Core: A Combined Experimental, Numerical, and Analytical Assessment. J APPL MECH-T ASME, 77. -. ISSN 0021-8936

Ferri, M and Mancarella, F and Belsito, L and Roncaglia, A and Yan, J and Seshia, AA and Soga, K and Zalesky, J (2010) Strain sensing on steel surfaces using vacuum packaged MEMS resonators. In: UNSPECIFIED pp. 1426-1429..

Ferri, M and Mancarella, L and Belsito, L and Roncaglia, A and Yan, J and Seshia, AA and Soga, K and Zalesky, J (2010) Strain sensing on steel surfaces using vacuum packaged MEMS resonators. In: 24th Eurosensors conference, 5-9-2010 to 8-9-2010, Linz, Austria.

Fleck, NA and Deshpande, VS and Ashby, MF (2010) Micro-architectured materials: past, present and future. P ROY SOC A-MATH PHY, 466. pp. 2495-2516. ISSN 1364-5021

Fleck, NA and Zisis, T (2010) The erosion of EB-PVD thermal barrier coatings: The competition between mechanisms. WEAR, 268. pp. 1214-1224. ISSN 0043-1648

Ghosh, SK and Ostanin, V and Seshia, AA (2010) Anharmonic QCM signals for the detection of surface-bound species. In: Biosensors 2010: 11th World Congress on Biosensors, 26-5-2010 to 28-5-2010, Glasgow, UK.

Ghosh, SK and Ostanin, V and Seshia, AA (2010) Anharmonic interaction signals for acoustic detection of analyte. Analytical Chemistry, 82. pp. 3929-3935. ISSN 0003-2700

Gwynne, JH and Oyen, ML and Cameron, RE (2010) Preparation of polymeric samples containing a graduated modulus region and development of nanoindentation linescan techniques. Polymer Testing, 29. pp. 494-502. ISSN 0142-9418

Harrington, SA and Durrell, JH and Wang, H and Wimbush, SC and Tsai, CF and MacManus-Driscoll, JL (2010) Understanding nanoparticle self-assembly for a strong improvement in functionality in thin film nanocomposites. NANOTECHNOLOGY, 21. -. ISSN 0957-4484

Huehne, R and Eickemeyer, J and Sarma, VS and Gueth, T and Thersleff, T and Freudenberger, J and deHaas, O and Weigand, M and Durrell, JH and Schultz, L and Holzapfel, B (2010) Application of textured highly alloyed Ni-W tapes for preparing coated conductor architectures. Superconductor Science and Technology, 23. 034015-. ISSN 0953-2048

Idiart, MI and Fleck, NA (2010) Size effects in the torsion of thin metal wires. Modelling and Simulation in Materials Science and Engineering, 18. 015009-. ISSN 0965-0393

Kim, DJ and Carrera, E and Czosnyka, M and Keong, N and Smielewski, P and Baledent, O and Sutcliffe, MPF and Pickard, JD and Czosnyka, Z (2010) Cerebrospinal compensation of pulsating cerebral blood volume in hydrocephalus. NEUROL RES, 32. pp. 587-592. ISSN 0161-6412

Kursumovic, A and Durrell, JH and Chen, SK and MacManus-Driscoll, JL (2010) Ambient/low pressure synthesis and fast densification to achieve 55 K T-c superconductivity in NdFeAsO0.75F0.25. SUPERCOND SCI TECH, 23. -. ISSN 0953-2048

Laurent, P and Fagnard, JF and Hari Babu, N and Cardwell, DA and Vanderhayden, B and Vanderbemden, P (2010) Self-heating of bulk high temperature superconductors of finite height subjected to a large alternating magnetic field. Superconductor Science and Technology, 23. 124004-. ISSN 0953-2048

Lee, JE-Y and Seshia, AA (2010) Direct parameter extraction in capacitively transduced micromechanical resonators using the anti-resonance. 2010 IEEE International Frequency Control Symposium, FCS 2010. pp. 133-136.

Lee, JEY and Seshia, AA (2010) Direct parameter extraction in capacitively transduced micromechanical resonators using the anti-resonance. In: IEEE International Frequency Control Symposium, 1-6-2010 to 4-6-2010, Newport Beach, California, USA.

Li, TY and Wang, CL and Sun, LJ and Yan, SB and Cheng, L and Yao, X and Xiong, J and Tao, BW and Feng, JQ and Xu, XY and Li, CS and Cardwell, DA (2010) Multiseeded melt growth of bulk Y–Ba–Cu–O using thin film seeds. Journal of Applied Physics, 108. 023914-123920. ISSN 0021-8979

Li, ZY and Taviani, V and Tang, T and Sutcliffe, MP and Gillard, JH (2010) The hemodynamic effects of in-tandem carotid artery stenosis: implications for carotid endarterectomy. J Stroke Cerebrovasc Dis, 19. pp. 138-145.

Lin, AT-H and Lee, JE-Y and Yan, J and Seshia, AA (2010) Methods for enhanced electrical transduction and characterization of micromechanical resonators. Sensors and Actuators, A: Physical, 158. pp. 263-272. ISSN 0924-4247

Lin, ATH and Lees, JEY and Yan, J and Seshia, AA (2010) Methods for enhanced electrical transduction and characterisation of micromechanical resonators. Sensors and Actuators A: Physical, 158. pp. 263-272. ISSN 0924-4247

Lin, ATH and Yan, J and Seshia, AA (2010) 2.2 MHz piezoresistive MEMS oscillator operating in air. In: 24th Eurosensors conference, 5-9-2010 to 8-9-2010, Linz, Austria.

Lin, ATH and Yan, J and Seshia, AA (2010) Electrostatically transduced face shear mode microresonator. In: IEEE International Frequency Control Symposium, 1-6-2010 to 4-6-2010, Newport Beach, California, USA.

Lin, ATH and Yan, J and Seshia, AA (2010) Detection of biomolecular binding using MEMS bulk acoustic wave sensors. In: Biosensors 2010: 11th World Congress on Biosensors, 26-5-2010 to 28-5-2010, Glasgow, UK.

Lin, ATH and Yan, J and Seshia, AA (2010) Mechanically coupled bulk-mode dual resonator mass sensor. In: 24th Eurosensors conference, 5-9-2010 to 8-9-2010, Linz, Austria.

Lin, ATH and Yan, JZ and Seshia, AA (2010) 2.2 MHz piezoresistive MEMS oscillator operating in air. In: UNSPECIFIED pp. 1498-1501..

Lin, ATH and Yan, JZ and Seshia, AA (2010) Electrostatically Transduced Face-Shear Mode Silicon MEMS Microresonator. In: UNSPECIFIED pp. 534-538..

Lin, ATH and Yan, JZ and Seshia, AA (2010) Mechanically Coupled Bulk-mode Dual Resonator Mass Sensor. In: UNSPECIFIED pp. 1454-1457..

Liu, F and Sutcliffe, MPF and Graham, WR (2010) Prediction of tread block forces for a free-rolling tyre in contact with a smooth road. WEAR, 269. pp. 672-683. ISSN 0043-1648

MacManus-Driscoll, JL and Harrington, SA and Durrell, JH and Ercolano, G and Wang, H and Lee, JH and Tsai, CF and Maiorov, B and Kursumovic, A and Wimbush, SC (2010) High current, low cost YBCO conductors-what's next? In: UNSPECIFIED -..

McGarry, P and McMeeking, RM and Deshpande, VS (2010) FADING MEMORY FORMULATION FOR ACTIVE STRESS FIBRE CONTRACTILITY. In: UNSPECIFIED pp. 363-364..

McShane, GJ and Deshpande, VS and Fleck, NA (2010) Underwater blast response of free-standing sandwich plates with metallic lattice cores. INT J IMPACT ENG, 37. pp. 1138-1149. ISSN 0734-743X

Menzel, A and Lin, ATH and Seshia, AA (2010) Detection of biotin-streptavidin binding interactions using micromachined electrometers. In: Biosensors 2010: 11th World Congress on Biosensors, 26-5-2010 to 28-5-2010, Glasgow, UK.

Michael, M and Felipe, C-S and Stephan, H and Gabor, C and Andrea C, F (2010) Dynamic catalyst restructuring during carbon nanotube growth. ACS Nano, 4. pp. 7587-7595. ISSN 1936-0851

Mikheenko, P and Abell, JS and Sarkar, A and Dang, VS and Awang Kechik, MM and Tanner, JL and Paturi, P and Huhtinen, H and Hari Babu, N and Cardwell, DA and Crisan, A (2010) Self-assembled artificial pinning centres in thick YBCO superconducting films. Journal of Physics: Conference Series, 234. ISSN 1742-6588

Moongkhamklang, P and Deshpande, VS and Wadley, HNG (2010) The compressive and shear response of titanium matrix composite lattice structures. ACTA MATER, 58. pp. 2822-2835. ISSN 1359-6454

Nachum, S and Fleck, NA and Ashby, MF and Colella, A and Matteazzi, P (2010) The microstructural basis for the mechanical properties and electrical resistivity of nanocrystalline Cu-Al2O3. MAT SCI ENG A-STRUCT, 527. pp. 5065-5071. ISSN 0921-5093

Neelakantan, S and Rivera-Diaz-del-Castillo, PEJ and van der Zwaag, S (2010) THERMODYNAMIC DESIGN OF ULTRA-STRONG TITANIUM ALLOYS UNDERGOING PLASTICITY INDUCED MARTENSITIC TRANSFORMATIONS. In: UNSPECIFIED pp. 203-210..

Noselli, G and Corso, F and Bigoni, D (2010) The stress intensity near a stiffener disclosed by photoelasticity. INT J FRACTURE, 166. pp. 91-103. ISSN 0376-9429

Olesiak, SE and Oyen, ML and Ferguson, VL (2010) Viscous-elastic-plastic behavior of bone using Berkovich nanoindentation. Mechanics of Time Dependent Materials, 14. pp. 111-124. ISSN 1385-2000

Olesiak, SE and Sponheimer, M and Eberle, J and Oyen, ML and Ferguson, VL (2010) Nanomechanical properties of modern and fossile bone. Palaeogeography Palaeoclimatology Palaeoecology, 289. pp. 25-32. ISSN 0031-0182

Ossa, EA and Deshpande, VS and Cebon, D (2010) Triaxial deformation behavior of bituminous mixes. Journal of Materials in Civil Engineering (ASCE), 22. pp. 124-135. ISSN 0899-1561

Oyen, ML and Galli, M (2010) Bone Composite Mechanics Related to Collagen Hydration State. In: UNSPECIFIED pp. 269-276..

Pathak, SK and Babu, NH and Shi, YH and Dennis, AR and Strasik, M and Cardwell, DA (2010) The anisotropic morphology of silver particles in Y-123/Y-24Nb1/Ag nanocomposite bulk high-temperature superconductors. Journal of Materials Research, 25. pp. 1243-1250. ISSN 0884-2914

Pathak, SK and Hari Babu, N and Shi, YH and Dennis, AR and Iida, K and Strasik, M and Cardwell, DA (2010) Recycling of multi-grain, melt processed bulk (RE)BCO superconductors. Superconductor Science and Technology, 23. 065012-. ISSN 0953-2048

Pfetzing-Micklich, J and Wagner, MFX and Zarnetta, R and Frenzel, J and Eggeler, G and Markaki, AE and Wheeler, J and Clyne, TW (2010) Nanoindentation of a Pseudoelastic NiTiFe Shape Memory Alloy. ADV ENG MATER, 12. pp. 13-19. ISSN 1438-1656

Pártay, LB and Bartók, AP and Csányi, G (2010) Efficient sampling of atomic configurational spaces. J Phys Chem B, 114. pp. 10502-10512.

Quintana-Alonso, I and Fleck, NA (2010) Damage Tolerance of a Sandwich Panel Containing a Cracked Square Lattice Core. In: UNSPECIFIED pp. 139-158..

Quintana-Alonso, I and Mai, SP and Fleck, NA and Oakes, DCH and Twigg, MV (2010) The fracture toughness of a cordierite square lattice. ACTA MATER, 58. pp. 201-207. ISSN 1359-6454

Ronan, W and Deshpande, VS and McMeeking, RM and McGarry, P (2010) FINITE ELEMENT ANALYSIS OF CYTOSKELETAL REMODELING DURING MICROPIPETTE ASPIRATION. In: UNSPECIFIED pp. 433-434..

Rubino, V and Deshpande, VS and Fleck, NA (2010) The three-point bending of Y-frame and corrugated core sandwich beams. INT J MECH SCI, 52. pp. 485-494. ISSN 0020-7403

Russell, BP and Malcom, A and Wadley, HNG and Deshpande, VS (2010) DYNAMIC COMPRESSIVE RESPONSE OF COMPOSITE CORRUGATED CORES. J MECH MATER STRUCT, 5. pp. 477-493. ISSN 1559-3959

Saadatfar, M and Sheppard, AP and Senden, TJ and Kabla, AJ (2010) Mapping forces in 3D elastic assembly of grains.

Sabatini, G and Ceschini, L and Martini, C and Williams, JA and Hutchings, IM (2010) Improving sliding and abrasive wear behaviour of cast A356 and wrought AA7075 aluminium alloys by plasma electrolytic oxidation. Materials and Design, 31. pp. 816-828. ISSN 0261-3069

Sekine, H and Beaumont, PWR (2010) Micromechanically derived lowest threshold stress intensity factor for macroscopic stress-corrosion cracking in unidirectional GFRP composites. Journal of Materials Science, 45. pp. 5988-5992. ISSN 0022-2461

Shi, Y and Dennis, AR and Xu, Z and Campbell, AM and Babu, NH and Cardwell, DA (2010) Field trapping of Y-Ba-Cu-O single grain rings joined to form the geometry of a solenoid. SUPERCOND SCI TECH, 23. -. ISSN 0953-2048

Shi, Y-H and Dennis, AR and Xu, Z and Campbell, AM and Hari Babu, N and Cardwell, DA (2010) Field trapping of Y–Ba–Cu–O single grain rings joined to form the geometry of a solenoid. Superconductor Science and Technology, 23. 045014-. ISSN 0953-2048

Shi, Y-H and Dennis, AR and Xu, Z and Campbell, AM and Iida, K and Hari Babu, N and Cardwell, DA (2010) Field trapping of Y–Ba–Cu–O single grain rings joined to form the geometry of a solenoid. Superconductor Science and Technology, 23. 045014-. ISSN 0953-2048

Shi, Y-H and Hari Babu, N and Iida, K and Yeoh, WK and Pathak, SK and Dennis, AR and Cardwell, DA (2010) Batch-processed GdBCO–Ag bulk superconductors fabricated using generic seeds with high trapped fields. Physica C: Superconductivity and its Applications, 470. pp. 685-688. ISSN 0921-4534

Shi, Y-H and Yeoh, WK and Dennis, AR and Hari Babu, N and Pathak, SK and Xu, Z and Cardwell, DA (2010) Growth rate of YBCO single grains containing Y-2411(M). Journal of Physics: Conference Series, 234. 012039-. ISSN 1742-6588

Shi, Y-H and Yoeh, W and Dennis, R and Hari Babu, N and Pathak, S and Xu, Z and Cardwell, A (2010) Growth rate of YBCO single grains containing Y-2411(M). Journal of Physics: Conference Series, 234. ISSN 1742-6588

Shi, YH and Hari Babu, N and Iida, K and Yeoh, WK and Dennis, AR and Pathak, SK and Cardwell, DA (2010) Batch-processed GdBCO-Ag bulk superconductors fabricated using generic seeds with high trapped fields. Physica C: Superconductivity, 470. pp. 685-688. ISSN 0921-4534

Tagarielli, VL and Deshpande, VS and Fleck, NA (2010) Prediction of the dynamic response of composite sandwich beams under shock loading. INT J IMPACT ENG, 37. pp. 854-864. ISSN 0734-743X

Taviani, V and Patterson, AJ and Graves, MJ and Hardy, CJ and Worters, P and Sutcliffe, MPF and Gillard, JH (2010) Accuracy and Repeatability of Fourier Velocity Encoded M-Mode and Two-Dimensional Cine Phase Contrast for Pulse Wave Velocity Measurement in the Descending Aorta. J MAGN RESON IMAGING, 31. pp. 1185-1194. ISSN 1053-1807

Taviani, V and Patterson, AJ and Worters, P and Sutcliffe, MPF and Graves, MJ and Gillard, JH (2010) Accuracy of Phase Contrast, Black-Blood, and Bright-Blood Pulse Sequences for Measuring Compliance and Distensibility Coefficients in a Human-Tissue Mimicking Phantom. J MAGN RESON IMAGING, 31. pp. 160-167. ISSN 1053-1807

Thiruvenkatanathan, P and Yan, J and Seshia, AA (2010) Topology dependence of mass sensitivities in mode-localised sensors. In: 24th European Frequency and Time Forum Conference, 12-4-2010 to 16-4-2010, Noordwijk, Netherlands.

Thiruvenkatanathan, P and Yan, J and Seshia, AA (2010) Ultrasensitive mode localized micromechanical electrometer. In: IEEE International Frequency Control Symposium, 1-6-2010 to 4-6-2010, Newport Beach, California, USA.

Thiruvenkatanathan, P and Yan, J and Seshia, AA (2010) Differential amplification of structural perturbations in weakly coupled MEMS resonators. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 57. pp. 690-697. ISSN 0885-3010

Thiruvenkatanathan, P and Yan, J and Seshia, AA (2010) Ultrasensitive Mode-Localized Micromechanical Electrometer. In: UNSPECIFIED pp. 91-96..

Thiruvenkatanathan, P and Yan, J and Woodhouse, J and Aziz, A and Seshia, AA (2010) Ultrasensitive mode-localized mass sensors with electrically tunable parametric sensitivity. Applied Physics Letters, 96. 081913-. ISSN 0003-6951

Thiruvenkatanathan, P and Yan, J and Woodhouse, J and Aziz, A and Seshia, AA (2010) Ultrasensitive mode-localized mass sensor with electrically tunable parametric sensitivity. APPL PHYS LETT, 96. -. ISSN 0003-6951

Vanderbemden, P and Laurent, P and Fagnard, JF and Ausloos, M and Hari Babu, N and Cardwell, DA (2010) Magneto-thermal phenomena in bulk high temperature superconductors subjected to applied AC magnetic fields. Superconductor Science and Technology, 23. 075006-. ISSN 0953-2048

Weigand, M and Speller, SC and Hughes, GM and Rutter, NA and Lozano-Perez, S and Grovenor, CRM and Durrell, JH (2010) Individual grain boundary properties and overall performance of metal-organic deposition coated conductors. PHYS REV B, 81. -. ISSN 1098-0121

Wimbush, SC and Durrell, JH and Tsai, CF and Wang, H and Jia, QX and Blamire, MG and MacManus Driscoll, JL (2010) Enhanced critical current in YBa2Cu3O7-delta thin films through pinning by ferromagnetic YFeO3 nanoparticles. Superconductor Science and Technology, 23. 045091-. ISSN 0953-2048

Wimbush, SC and Yu, R and Bali, R and Durrell, JH and MacManus-Driscoll, JL (2010) Addition of ferromagnetic CoFe2O4 to YBCO thin films for enhanced flux pinning. PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 470. S223-S224. ISSN 0921-4534

Xu, JY and Lu, TJ and Hodson, HP and Fleck, NA (2010) Analysis of thermal dispersion in an array of parallel plates with fully-developed laminar flow. INT J HEAT FLUID FL, 31. pp. 57-69. ISSN 0142-727X

Xu, Z and Lewin, R and Campbell, AM and Cardwell, DA and Jones, H (2010) Theoretical simulation studies of pulsed field magnetisation of (RE)BCO bulk superconductors. Journal of Physics: Conference Series, 234. ISSN 1742-6588

Yan, J and Seshia, AA and Le Phan, K and van Beek, JTM (2010) Internal electrical and mechanical phase inversion for coupled resonator array MEMS filters. Sensors and Actuators A: Physical, 158. pp. 18-29. ISSN 0924-4247

Yan, JZ and Lee, JEY and Seshia, AA (2010) Transduction Dependent Optimization of Electromechanical Parameters for Electrostatically Actuated MEMS/NEMS Resonators. In: UNSPECIFIED pp. 7533-7536..

Yoo, SH and Chang, SH and Sutcliffe, MPF (2010) Compressive characteristics of foam-filled composite egg-box sandwich panels as energy absorbing structures. COMPOS PART A-APPL S, 41. pp. 427-434. ISSN 1359-835X

Zisis, T and Fleck, NA (2010) The elastic-plastic indentation response of a columnar thermal barrier coating. WEAR, 268. pp. 443-454. ISSN 0043-1648

Zisis, T and Fleck, NA (2010) The elastic-plastic indentation response of a columnar thermal barrier coating. Wear, 268. pp. 443-454. ISSN 0043-1648

Zou, X and Yan, J and Seshia, AA (2010) A novel tunable band-pass filter based on a single square-ring MEMS resonator. In: 24th Eurosensors conference, 5-9-2010 to 8-9-2010, Linz, Austria.

Zou, X and Yan, J and Seshia, AA (2010) A novel tuneable band-pass filter based on a single square-ring MEMS resonator. In: UNSPECIFIED pp. 1446-1449..

2009

Alonso, IQ and Fleck, NA (2009) The Damage Tolerance of a Sandwich Panel Containing a Cracked Honeycomb Core. J APPL MECH-T ASME, 76. -. ISSN 0021-8936

Ashby, MF and Shercliff, H and Cebon, D (2009) Materials: engineering, science, processing and design. Butterworth Heinemann, -. ISBN 1856178951,9781856178952

Awang Kechik, MM and Mikheenko, P and Sarkar, A and Dang, VS and Hari Babu, N and Cardwell, DA and Abell, JS and Crisan, A (2009) Artificial pinning centres in YBa2Cu3O7−δ thin films by Gd2Ba4CuWOy nanophase inclusions. Superconductor Science and Technology, 22. 034020-. ISSN 0953-2048

Barrett, SRH and Sutcliffe, MPF and Howarth, S and Li, ZY and Gillard, JH (2009) Experimental measurement of the mechanical properties of carotid atherothrombotic plaque fibrous cap. Journal of Biomechanics, 42. pp. 1650-1655. ISSN 0021-9290

Bernstein, N and Kermode, JR and Csányi, G (2009) Hybrid atomistic simulation methods for materials systems. Reports on Progress in Physics, 72. 026501-. ISSN 0034-4885

Blanchard, GB and Kabla, AJ and Schultz, NL and Butler, LC and Sanson, B and Gorfinkiel, N and Mahadevan, L and Adams, RJ (2009) Tissue tectonics: morphogenetic strain rates, cell shape change and intercalation. Nature Methods, 6. pp. 458-464. ISSN 1548-7091

Bressan, JD and Williams, JA (2009) Mathematical slip-line field solutions for ploughing a hard particle over a softer material. In: UNSPECIFIED pp. 1865-1872..

Butler, LC and Blanchard, GB and Kabla, AJ and Lawrence, NJ and Welchman, DP and Mahadevan, L and Adams, RJ and Sanson, B (2009) Cell shape changes indicate a role for extrinsic tensile forces in Drosophila germ-band extension. Nature Cell Biology. ISSN 1465-7392

Cardwell, DA and Shi, YH and Hari Babu, N and Iida, K (2009) Fabrication of high performance Gd-Ba-Cu-O single grains in air using a practical melt processing technique. Physica C: Superconductivity and its Applications, 469. pp. 1146-1152. ISSN 0921-4534

Cardwell, DA and Yeoh, WK and Pathak, SK and Shi, YH and Dennis, AR and Hari Babu, N and Iida, K (2009) The generation of high trapped fields in bulk RE(BCO) high temperature superconductors. In: Transactions of the International Cryogenic Materials Conference - ICMC, 28-6-2009 to 2-7-2009, Tucson, USA pp. 397-406..

Chua, W and Oyen, ML (2009) Do we know the strength of the chorioamnion? A critical review and analysis. European Journal of Obstetrics & Gynecology and Reproductive Biology, 144. pp. 128-133. ISSN 0301-2115

Chua, W and Oyen, ML (2009) Viscoelastic properties of membranes measured by spherical indentation. Cellular and Molecular Bioengineering, 2. pp. 49-56. ISSN 1865-5025

Chua, WK and Oyen, ML (2009) Do we know the strength of the chorioamnion? A critical review and analysis. European Journal of Obstetrics Gynecology and Reproductive Biology, 144. S128-S133. ISSN 0301-2115

Collier, CA and Paillard, JM and Markaki, AE and Curran, JA and Griffiths, HJ and Clyne, TW (2009) In Vitro Human Osteoblast Responses to Titanium Oxide-Based Surfaces With Varying Topology and Composition. In: UNSPECIFIED pp. 77-82..

Comley, K and Fleck, NA (2009) The High Strain Rate Response of Adipose Tissue. In: UNSPECIFIED pp. 27-33..

Comley, K and Fleck, NA (2009) The mechanical response of porcine adipose tissue. ASME Journal of Biomechanical Engineering. ISSN 0148-0731

Cottenden, DJ and Cottenden, AM (2009) An analytical model of the motion of a conformable sheet over a general convex surface in the presence of frictional coupling. Q J MECH APPL MATH, 62. pp. 345-364. ISSN 0033-5614

Cugnoni, J and Oyen, ML and Chamock-Jones, DS and Burton, G (2009) Pressure-Regulated Gas Diffusion in Human Terminal Chorionic Villi. In: UNSPECIFIED 284A-284A..

Côté, F and Russel, BP and Deshpande, VS and Fleck, NA (2009) The through-thickness compressive strength of a composite sandwich panel with a hierarchical square honeycomb sandwich core. Transactions of the ASME, Journal of Applied Mechanics, 76. 061004-. ISSN 0021-8936

Deshpande, VS and McMeeking, RM and Wadley, HNG and Evans, AG (2009) Constitutive model for predicting dynamic interactions between soil ejecta and structural panels. Journal of the Mechanics and Physics of Solids, 57. pp. 1139-1164. ISSN 0022-5096

Durrell, JH and Rutter, NA (2009) Importance of low-angle grain boundaries in YBa2Cu3O7-delta coated conductors. SUPERCOND SCI TECH, 22. -. ISSN 0953-2048

Ferri, M and Mancarella, F and Seshia, AA and Ransley, JHT and Soga, K and Zaleski, S and Roncaglia, A (2009) Development of MEMS strain sensors for crack monitoring an ageing civil infrastructures. Smart Structures and Systems, an International Journal. ISSN 1738-1584

Ferri, M and Mancarella, F and Yan, J and Lee, JEY and Seshia, AA and Zaleski, S and Soga, K and Roncaglia, A (2009) Design and prototyping of a MEMS-based crackmeter for structural monitoring. In: 15th International Conference on Solid-State Sensors, Actuators and Microsystems, Transducers' 09, 21-6-2009 to 24-6-2009, Denver, USA.

Fleck, NA and Willis, JR (2009) A mathematical basis for strain-gradient plasticity theory - Part I: scalar plastic multiplier. Journal of the Mechanics and Physics of Solids, 57. pp. 161-177. ISSN 0022-5096

Fleck, NA and Willis, JR (2009) A multi-scale constitutive model for the sintering of an air-plasma-sprayed thermal barrier coating, and its response under hot isostatic pressing. Journal of the Mechanics and Physics of Solids, 57. pp. 689-705. ISSN 0022-5096

Galli, M and Comley, KSC and Shean, TAV and Oyen, ML (2009) Viscoelastic and poroelastic mechanical characterization of hydrated gels. Journal of Materials Research, 24. pp. 973-979. ISSN 0884-2914

Galli, M and Oyen, ML (2009) Creep properties from indentation tests by analytical and numerical techniques. International Journal of Materials Research, 100. pp. 954-959. ISSN 1862-5282

Galli, M and Oyen, ML (2009) Fast identification of poroelastic parameters from indentation tests. CMES: Computer Modeling in Engineering and Sciences, 48. pp. 241-270. ISSN 1526-1492

Gentleman, E and Swain, RJ and Evans, ND and Jell, G and Ball, MD and Boonrungsiman, S and Shean, TAV and Oyen, ML and Porter, A and Stevens, MM (2009) Comparative materials differences revealed in engineered bones as a function of cell-specific differentiation. Nature Materials, 8. pp. 763-770. ISSN 1476-1122

Ghosh, SK and Ostanin, V and Seshia, AA (2009) Microbead dynamics on quartz crystal microbalance at elevated amplitudes. In: IEEE International Ultrasonics Symposium, 20-9-2009 to 23-9-2009, Rome, Italy.

Ghosh, SK and Ostanin, VP and Seshia, AA (2009) Microbead dynamics on quartz crystal microbalance at elevated amplitudes. In: UNSPECIFIED.

Gutierrez, J and Palau, A and Durrell, JH and Roma, N and Puig, T and Obradors, X and Blamire, MG (2009) Vortex dynamics in thin films of YBa2Cu3O7-x with three-dimensional nanoscale patterns. Physical Review B: Condensed Matter and Materials Physics, 79. 064526-. ISSN 1550-235X

Harrington, SA and Durrell, JH and Maiorov, B and Wang, SC and Wimbush, SC and Kursumovic, A and Lee, JH and MacManus Driscoll, JL (2009) Self-assembled, rare earth tantalate pyrochlore nanoparticles for superior flux pinning in YBa2Cu3O7-delta films. Superconductor Science and Technology, 22. 022001-. ISSN 0953-2048

Harrington, SA and MacManus Driscoll, JL and Durrell, JH (2009) Practical vortex diodes from pinning enhanced YBa2Cu3O7-delta. Applied Physics Letters, 95. 022518-. ISSN 0003-6951

Haunch, KN and Oyen, ML and Odegard, GM and Haut Donahue, TL (2009) Nanoindentation of the insertional zones of human meniscal attachments into underlying bone. Journal of the Mechanical Behaviour of Biomedical Materials, 2. pp. 339-347. ISSN 1751-6161

Idiart, MI and Deshpande, VS and Fleck, NA and Willis, JR (2009) Size effects in the bending of thin foils. International Journal of Engineering Science. ISSN 0020-7225

Kabla, AJ and Senden, T (2009) Dilatancy in slow granular flows. Physics Review Letters, 102. ISSN 0031-9007

Kim, DJ and Czosnyka, Z and Keong, N and Radolovich, DK and Smielewski, P and Sutcliffe, MPF and Pickard, JD and Czosnyka, M (2009) Index of cerebrospinal compensatory reserve in hydrocephalus. Neurosurgery, 64. pp. 494-501. ISSN 0148-396X

Kim, DJ and Kasprowicz, M and Carrera, E and Castellani, G and Zweifel, C and Lavinio, A and Smielewski, P and Sutcliffe, MPF and Pickard, JD and Czosnyka, M (2009) The monitoring of relative changes in compartmental compliances of brain. Physiological Measurement, 30. pp. 647-659. ISSN 0967-3334

Kratmann, KK and Sutcliffe, MPF and Lilleheden, LT and Pyrz, R and Thomsen, OT (2009) A novel image analysis procedure for measuring fibre misalignment in undirectional fibre composites. Composites Science and Technology, 69. pp. 228-238. ISSN 0266-3538

Kursumovic, A and Maiorov, B and Durrell, JH and Wang, H and Zhou, H and Stan, L and Harrington, S and Wimbush, S and Holesinger, TG and MacManus-Driscoll, JL (2009) High I-c, YBa2Cu3O7-x films grown at very high rates by liquid assisted growth incorporating lightly Au-doped SrTiO3 buffers. SUPERCOND SCI TECH, 22. -. ISSN 0953-2048

Lee, JE-Y and Seshia, AA (2009) 5.4-MHz single-crystal silicon wine glass mode disk resonator with quality factor of 2 million. Sensors and Actuators, A: Physical, 156. pp. 28-35. ISSN 0924-4247

Lee, JE-Y and Seshia, AA (2009) Binary excitation of a high-Q bulk acoustic microresonator by actuation polarity inversion. In: UNSPECIFIED pp. 443-448..

Lee, JE-Y and Seshia, AA (2009) Parasitic feedthrough cancellation techniques for enhanced electrical characterization of electrostatic microresonators. Sensors and Actuators, A: Physical, 156. pp. 36-42. ISSN 0924-4247

Lee, JE-Y and Yan, J and Seshia, AA (2009) Low loss HF band SOI wine glass bulk mode capacitive square-plate resonator. Journal of Micromechanics and Microengineering, 19. ISSN 0960-1317

Lee, JEY and Seshia, AA (2009) Parasitic feedthrough cancellation techniques for enhanced electrical characterisation of electrostatic microresonators. Sensors and Actuators A: Physical. ISSN 0924-4247

Lee, JEY and Yan, J and Seshia, AA (2009) Low loss HF band SOI wine glass bulk mode capacitive square-plate resonator. Journal of Micromechanics and Microengineering, 19. 074003-. ISSN 0960-1317

Legant, WR and Pathak, A and Yang, MT and Deshpande, VS and McMeeking, RM and Chen, CS (2009) Microfabricated tissue gauges to measure and manipulate forces from 3D microtissues. Proceedings of the National Academy of Sciences USA, 106. pp. 10097-10102. ISSN 0027-8424

Lilikakis, A and Sutcliffe, MPF (2009) The effect of vancomycin addition to the compression strength of antibiotic-loaded bone cements. International Orthopaedics, 33. pp. 815-819. ISSN 0341-2695

Lin, AT-H and Lee, JE-Y and Yan, J and Seshia, AA (2009) Enhanced transduction methods for electrostatically driven MEMS resonators. TRANSDUCERS 2009 - 15th International Conference on Solid-State Sensors, Actuators and Microsystems. pp. 561-564.

Lin, ATH and Lee, JEY and Yan, J and Seshia, AA (2009) Enhanced transduction methods for electrostatically driven MEMS resonators. In: 15th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2009), 21-6-2009 to 24-6-2009, Denver, USA.

Lin, ATH and Yan, J and Seshia, AA (2009) Dynamic response of water droplet coated silicon MEMS resonators. In: IEEE International Ultrasonics Symposium, 20-9-2009 to 23-9-2009, Rome, Italy.

Liu, QD and Fleck, NA and Huber, JE and Chu, DP (2009) Birefringence measurements of creep near an electrode tip in transparent PLZT. Journal of the European Ceramic Society, 29. pp. 2289-2296. ISSN 0955-2219

Luo, JK and Fu, YQ and Williams, JA and Milne, WI (2009) Thermal degradation of electroplated nickel thermal microactuators. Journal of Microelectromechanical Systems, 18. pp. 1279-1287. ISSN 1057-7157

MacManus-Driscoll, JL and Kursumovic, A and Durrell, JH and Harrington, S and Wimbush, SC and Maiorov, B and Stan, L and Zhou, HH and Holesinger, T and Wang, HY (2009) High I-c in YBCO Films Grown at Very High Rates by Liquid Mediated Growth. IEEE T APPL SUPERCON, 19. pp. 3180-3183. ISSN 1051-8223

Mai, SP and Fleck, NA (2009) Reticulated tubes: effective elastic properties and acutation response. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 465. pp. 685-708. ISSN 1364-5021

Markaki, AE and Knowles, KM and Oliver, RA and Gholinia, A (2009) Surface terracing on ferritic stainless-steel fibres and potential relevance to in vitro cell growth. PHILOS MAG, 89. pp. 2285-2303. ISSN 1478-6435

McGarry, P and Evans, AG and McMeeking, RM and Deshpande, VS (2009) MODELING THE ACTIVE CONTRACTILITY OF CELLS UNDER DYNAMIC LOADING. In: UNSPECIFIED pp. 101-102..

McGarry, P and Fu, J and Yang, MT and Chen, CS and McMeeking, RM and Evans, AG and Deshpande, VS (2009) Simulation of the contractile response of cells on an array of micro-posts. Philosophical Transactions of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 367. pp. 3477-3497. ISSN 1364-503X

McGarry, P and McMeeking, RM and Evans, AG and Deshpande, VS (2009) MODELING THE ACTIVE RESPONSE OF CELLS TO MECHANICAL STIMULATION. In: UNSPECIFIED pp. 1053-1054..

Monroy Aceves, C and Sutcliffe, MPF and Ashby, MF and Skordos, AA (2009) Design selection of a wind turbine blade using prepreg materials. In: 17th International Conference on Composite Materials, ICCM' 09, 27-7-2009 to 31-7-2009, Edinburgh, Scotland.

O'Farrell, EC and Tompsett, DA and Sebastian, SE and Harrison, N and Capan, C and Balicas, L and Kuga, K and Matsuo, A and Kindo, K and Tokunaga, M and Nakatsuji, S and Csányi, G and Fisk, Z and Sutherland, ML (2009) Role of f electrons in the Fermi surface of the heavy fermion superconductor beta-YbAlB4. Phys Rev Lett, 102. 216402-. ISSN 0031-9007

O'Farrell, ECT and Tompsett, DA and Sebastian, SE and Harrison, N and Capan, C and Balicas, L and Kuga, K and Matsu, A and Kindo, K and Tokunaga, M and Nakatsuji, S and Csanyi, G and Fisk, Z and Sutherland, ML (2009) Role of electrons in the Fermi surface of the heavy fermion superconductor β-YbAlB4. Physical Review Letters, 102. 216402-. ISSN 0031-9007

Oborny, B and Vukov, J and Csanyi, G and Meszana, G (2009) Metapopulation dynamics across gradients – the relation between colonization and extinction in shaping the range edge. Oikos, 118. pp. 1453-1460. ISSN 0030-1299

Olesiak, SE and Oyen, ML and Ferguson, VL (2009) Viscous behavior in Berkovich nanoindentation of bone. In: SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 1-6-2009 to 4-6-2009, Albuquerque, USA pp. 1803-1809..

Oyen, M and Taylor, D (2009) Special issue on nanoindentation of biological materials. Journal of the Mechanical Behavior of Biomedical Materials, 2. p. 311. ISSN 1751-6161

Oyen, ML and Cook, RF (2009) A practical guide for analysis of nanoindentation data. Journal of the Mechanical Behaviour of Biomedical Materials, 2. pp. 396-407. ISSN 1751-6161

Pane, I and Fleck, NA and Chu, DP and Huber, JE (2009) Mechanical constraint and loading on ferroelectric memory capacitors. Materials Research Society Symposium Proceedings, 1160. pp. 87-97. ISSN 0272-9172

Pane, I and Fleck, NA and Chu, DP and Huber, JE (2009) The influence of mechanical constraint upon the switching of a ferroelectric memory capacitator. European Journal of Mechanics - A / Solids, 28. pp. 195-201. ISSN 0997-7538

Pathak, SK and Babu, NH and Iida, K and Strasik, M and Cardwell, DA (2009) Processing and properties of large grain Y–Ba–Cu–O containing Y2Ba4CuWOy and Ag second phase inclusions. Journal of Applied Physics, 106. 063921-063926. ISSN 0021-8979

Pathak, SK and Yeoh, WK and Hari Babu, N and Shi, YH and Iida, K and Strasik, M and Cardwell, DA (2009) Fabrication of high performance Y-123/Y-24111/Ag single grain composites. Physica C: Superconductivity and its Applications, 469. pp. 1173-1177. ISSN 0921-4534

Quintana Alonso, I and Fleck, NA (2009) Compressive response of a sandwich plate containing a cracked diamond-celled lattice. Journal of the Mechanics and Physics of Solids, 57. pp. 1545-1567. ISSN 0022-5096

Ricco, M and Belli, M and Mazzzani, D and Pontiroli, D and Quintavalle, D and Jánossy, A and Csányi, G (2009) Superionic conductivity in the Li4C60 fulleride polymer. Physical Review Letters, 102. 145901-. ISSN 0031-9007

Rubino, V and Deshpande, VS and Fleck, NA (2009) The dynamic response of clamped rectangular Y-frame and corrugated core sandwich plates. European Journal of Mechanics - A / Solids, 28. pp. 14-24. ISSN 0997-7538

Shi, Y-H and Hari Babu, N and Iida, K and Cardwell, DA (2009) The effect of very high barium content on the properties of GdBCO single grain bulk superconductors. Journal of Materials Research, 24. pp. 10-18. ISSN 0884-2914

Shi, YH and Hari Babu, N and Iida, K and Cardwell, DA (2009) The effect of very high barium content in the precursor on the properties of GdBCO single grain bulk superconductors. Journal of Materials Research, 24. pp. 10-18. ISSN 0884-2914

Shi, YH and Hari Babu, N and Iida, K and Yeoh, WK and Dennis, AR and Cardwell, DA (2009) Influence of Gd-2411(Nb) on the superconducting properties of GdBCO single grains. Superconductor Science and Technology, 22. 075025-. ISSN 0953-2048

Solt, I and Kulhanek, P and Simon, I and Winfield, S and Payne, MC and Csányi, G and Fuxreiter, M (2009) Evaluating boundary dependent errors in QM/MM simulations. The Journal of Physical Chemistry Part B: Condensed Matter, Materials, Surfaces, Interfaces & Biophysical, 113. pp. 5728-5735. ISSN 1520-6106

Solt, I and Kulhánek, P and Simon, I and Winfield, S and Payne, MC and Csányi, G and Fuxreiter, M (2009) Evaluating boundary dependent errors in QM/MM simulations. J Phys Chem B, 113. pp. 5728-5735. ISSN 1520-6106

Sutcliffe, MPF and Huang, Y and Maguire, JJ and Davenport, AP (2009) In vitro measurement of diseased coronary artery mechanical properties. In: 4th International Symposium on Biomechanics in Vascular Biology and Cardiovascular Disease, 16-4-2009 to 17-4-2009, Rotterdam, Netherlands.

Tagarielli, VL and Deshpande, VS and Fleck, NA (2009) Prediction of the dynamic response of composite sandwich beams under shock loading. International Journal of Impact Engineering. ISSN 0734-743X

Taviani, V and Patterson, AJ and Wong, P and Sutcliffe, MPF and Graves, MJ and Gillard, JH (2009) Phantom investigation on the accuracy of different pulse sequences for the determination of arterial distensibility. In: 17th International Society for Magnetic Resonance in Medicine, ISMRM' 09, 18-4-2009 to 24-4-2009, Honolulo, Hawaii -..

Thiruvenkatanathan, P and Yan, J and Lee, JE-Y and Seshia, AA (2009) Enhancing parametric sensitivity using mode localization in electrically coupled mems resonators. TRANSDUCERS 2009 - 15th International Conference on Solid-State Sensors, Actuators and Microsystems. pp. 2350-2353.

Thiruvenkatanathan, P and Yan, J and Lee, JEY and Seshia, AA (2009) Enhancing parametric sensitivity using mode localization in electrically coupled MEMS resonators. In: 15th International Conference on Solid-State Sensors, Actuators and Microsystems, 21-6-2009 to 25-6-2009, Denver, USA.

Thiruvenkatanathan, P and Yan, J and Seshia, AA (2009) Common mode rejection in electrically coupled MEMS resonators utilising mode localisation for sensor applications. In: IEEE International Frequency Control Symposium, 21-4-2009 to 24-4-2009, Besancon, France.

Thiruvenkatanathan, P and Yan, J and Seshia, AA (2009) Effects of mechanical and electrical coupling on parametric sensitivity of mode localized sensors. In: IEEE International Ultrasonics Symposium, 20-9-2009 to 23-9-2009, Rome, Italy.

Thiruvenkatanathan, P and Yan, J and Seshia, AA (2009) Common mode rejection in electrically coupled MEMS resonators utilizing mode localization for sensor applications. In: UNSPECIFIED pp. 358-363..

Thiruvenkatanathan, P and Yan, J and Woodhouse, J and Aziz, A and Seshia, AA (2009) Effects of mechanical and electrical coupling on the parametric sensitivity of mode localized sensors. In: UNSPECIFIED.

Thiruvenkatanathan, P and Yan, J and Woodhouse, J and Seshia, AA (2009) Enhancing parametric sensitivity in electrically coupled MEMS resonators. Journal of Microelectromechanical Systems, 18. pp. 1077-1086. ISSN 1057-7157

Threadgill, PL and Leonard, AJ and Shercliff, HR and Withers, PJ (2009) Friction stir welding of aluminium alloys. INT MATER REV, 54. pp. 49-93. ISSN 0950-6608

Tilbrook, MT and Deshpande, VS and Fleck, NA (2009) Underwater blast loading of sandwich beams: regimes of behaviour. International Journal of Solids and Structures, 46. pp. 3209-3221. ISSN 0020-7683

Vader, D and Kabla, AJ and Weitz, DA and Mahadevan, L (2009) Strain-induced alignment in collagen gels. PLoS ONE. ISSN 1932-6203

Vaziri, A and Xue, ZY and Deshpande, VS and Espinosa, HD (2009) Special Issue on Advances in Impact Engineering. J APPL MECH-T ASME, 76. -. ISSN 0021-8936

Wallace, AM and Cutting, ED and Sutcliffe, MPF and Langley Hobbs, SJ (2009) A biomechanical comparison of six different double loop configurations for use in the lateral fabella suture technique. Veterinary and Comparative Orthopaedics and Traumatology, 21. pp. 391-399. ISSN 0932-0814

Wei, Z and Evans, AG and Deshpande, VS (2009) The influence of material properties and confinement on the dynamic penetration of alumina by hard spheres. Journal of Applied Mechanics, 76. 051305-. ISSN 0021-8936

Weigand, M and Speller, S and Rutter, NA and Hughes, GM and Grovenor, C and Durrell, JH (2009) Critical Current Densities of Isolated Grain Boundaries in Coated Conductors. IEEE T APPL SUPERCON, 19. pp. 3569-3572. ISSN 1051-8223

Williams, JA (2009) First International Conference on Abrasive Processes (ICAP2008). J MATER PROCESS TECH, 209. p. 6021. ISSN 0924-0136

Williams, JA (2009) TRIBOLOGICAL CHALLENGES IN SMALL DEVICES. In: UNSPECIFIED pp. 369-376..

Wimbush, SC and Durrell, JH and Bali, R and Yu, R and Wang, HY and Harrington, SA and MacManus-Driscoll, JL (2009) Practical Magnetic Pinning in YBCO. IEEE T APPL SUPERCON, 19. pp. 3148-3151. ISSN 1051-8223

Withnell, TD and Schoppl, KR and Durrell, JH and Weber, HW (2009) Effects of Irradiation on Vicinal YBCO Thin Films. IEEE T APPL SUPERCON, 19. pp. 2925-2928. ISSN 1051-8223

Wong, ZJ and Yan, J and Soga, K and Seshia, AA (2009) A multi-degree-of-freedom electrostatic MEMS power harvester. In: 9th International Workshop on Micro- and Nanotechnology for Power Generation and Energy Conversion Applications, PowerMEMS 2009, 1-12-2009 to 4-12-2009, Washington DC, USA.

Yan, J and Lee, JEY and Seshia, AA (2009) Transduction dependent optimization of electromechanical parameters for electrostatically actuated MEMS/NEMS resonators. In: International Conference on Nanoscience and Nanotechnology, 1-9-2009 to 3-9-2009, Beijing, China.

Yan, J and Lin, ATH and Seshia, AA (2009) Suppression of parasitic resonance in piezoresistively transduced longitudinal mode silicon MEMS resonators. In: IEEE International Ultrasonics Symposium, 20-9-2009 to 23-9-2009, Rome, Italy.

Yan, J and Seshia, AA (2009) Thermoelastic dissipation in MEMS/NEMS flexural mode resonators. J Nanosci Nanotechnol, 9. pp. 1011-1014. ISSN 1533-4880

Yeoh, WK and Pathak, SK and Shi, YH and Dennis, AR and Cardwell, DA and Babu, NH and Strasik, M (2009) Improved flux pinning in Y-Ba-Cu-O superconductors containing niobium oxide. IEEE Transactions on Applied Superconductivity, 19. pp. 2970-2973. ISSN 1051-8223

Yeoh, WK and Pathak, SK and Shi, YH and Dennis, AR and Cardwell, DA and Hari Babu, N and Iida, K and Strasik, M (2009) Control of Y2BaCuO5 particle formation in bulk, single grain Y-Ba-Cu-O. Superconductor Science and Technology, 22. 065011-. ISSN 0953-2048

Young, S and Blanchard, G and Kabla, A and Adams, R (2009) Quantifying tissue deformations and cell rearrangements that reshape the developing forebrain. In: UNSPECIFIED S82-S82..

Zhu, H and Chu, DP and Fleck, NA and Rowley, SE and Saxena, SS (2009) Polarization change in ferroelectric thin film capacitors under external stress. Journal of Applied Physics, 105. 061609-. ISSN 0021-8979

Zumpano, Z and Sutcliffe, MPF and Monroy Aceves, C and Stronge, WJ and Fox, M (2009) Impact damage to 3D woven CFRP composites plates. In: 17th International Conference on Composite Materials, ICCM' 09, 27-7-2009 to 31-7-2009, Edinburgh, Scotland.

2008

Babu, NH and Iida, K and Matthews, LS and Shi, Y and Cardwell, DA (2008) Influence of Sm2Ba4CuBiOy phase content on J(c) of SmBa2Cu3O7/Sm2Ba4CuBiOy nano-composites. In: UNSPECIFIED pp. 21-24..

Balint, DS and Deshpande, VS and Needleman, A and Van der Giessen, E (2008) Discrete dislocation plasticity analysis of the grain size dependence of the flow strength of polycrystals. INT J PLASTICITY, 24. pp. 2149-2172. ISSN 0749-6419

Bourhis, EL and Morris, DJ and Oyen, ML and Schwaiger, R and Staedler, T (2008) Materials Research Society Symposium Proceedings - Fundamentals of Nanoindentation and Nanotribology IV: Preface. Materials Research Society Symposium Proceedings, 1049. ISSN 0272-9172

Boutchich, M and Mamtora, TJ and McShane, GJ and Haneef, I and Moore, DF and Williams, JA (2008) Force measurements on U-shaped electrothermal microactuators: applications to packaging. Proceedings of the Institution of Mechanical Engineers, C: Journal of Mechanical Engineering Science, 222. pp. 87-96. ISSN 0954-4062

Cardwell, DA (2008) The power of heat (reviews of three textbooks). Times Higher Education -Textbook Guide supplement. iv-v.

Cardwell, DA and Babu, NH (2008) Improved magnetic flux pinning in bulk (RE)BCO superconductors. In: UNSPECIFIED pp. 543-550..

Cardwell, DA and Murakami, M and Salama, K (2008) Preface-Proceedings of the sixth international workshop on the processing and applications of bulk superconductors (PASREG). Materials Science and Engineering B: Solid State Materials for Advanced Technology, 151. p. 1. ISSN 0921-5107

Cervantes Sodi, F and Csányi, G and Piscanec, S and Ferrari, AC (2008) Edge-functionalized and substitutionally doped graphene nanoribbons: electronic and spin properties. Physical Review B: Condensed Matter and Materials Physics, 77. 165427-. ISSN 1550-235X

Cervantes Sodi, F and Csányi, G and Piscanec, S and Ferrari, AC (2008) Electronic properties of chemically modified graphene ribbons. Physica Status Solidi B, 245. pp. 2068-2071. ISSN 0370-1972

Chen, DX and Sanchez, A and Navau, C and Shi, YH and Cardwell, DA (2008) Critical current density of melt grown, single grain, Y-Ba-Cu-O discs determined by AC susceptibility measurements. Superconductor Science and Technology, 21. 085013-. ISSN 0953-2048

Cottenden, AM and Cottenden, DJ and Karavokiros, S and Wong, WK (2008) Development and experimental validation of a mathematical model for friction between fabrics and a volar forearm phantom. Proc Inst Mech Eng H, 222. pp. 1097-1106. ISSN 0954-4119

Cottenden, AM and Cottenden, DJ and Karavokiros, S and Wong, WKR (2008) Development and experimental validation of a mathematical model for friction between fabrics and a volar forearm phantom. P I MECH ENG H, 222. pp. 1097-1106. ISSN 0954-4119

Cottenden, AM and Wong, WK and Cottenden, DJ and Farbrot, A (2008) Development and validation of a new method for measuring friction between skin and nonwoven materials. P I MECH ENG H, 222. pp. 791-803. ISSN 0954-4119

Cottenden, AM and Wong, WK and Cottenden, DJ and Farbrot, A (2008) Development and validation of a new method for measuring friction between skin and nonwoven materials. Proc Inst Mech Eng H, 222. pp. 791-803. ISSN 0954-4119

Deshpande, VS and Evans, AG (2008) Inelastic deformation and energy dissipation in ceramics: a mechanism-based constitutive model. Journal of the Mechanics and Physics of Solids, 56. pp. 3077-3100. ISSN 0022-5096

Ferri, M and Mancarella, F and Ransley, JHT and Seshia, AA (2008) Fabrication of DETF sensors in SOI technology with submicron air gaps using a maskless line narrowing technique. In: 7th IEEE Conference on Sensors, 26-10-2008 to 29-10-2008, Lecce, Italy.

Ferri, M and Mancarella, F and Roncoglia, A and Ransley, JHT and Yan, J and Seshia, AA (2008) Fabrication of DETF sensors in SOI technology with submicron air gaps using a maskless line narrowing technique. In: 7th IEEE Conference on Sensors, 26-10-2008 to 29-10-2008, Lecce, Italy pp. 1131-1134..

Fleck, NA and Willis, JR (2008) A mathematical basis for strain-gradient plasticity theory. Part II: tensorial plastic multiplier. Journal of the Mechanics and Physics of Solids, 57. pp. 1045-1057. ISSN 0022-5096

Fox, MN and Sutcliffe, MPF (2008) Modelling material transfer in metal rolling using plasticine. Wear, 264. pp. 18-25. ISSN 0043-1648

Galli, M and Oyen, ML (2008) Bone composite mechanics related to collagen hydration state. In: International Union of Theoretical and Applied Mechanics Symposium on Cellular, Molecular and Tissue Mechanics, 18-6-2008 to 21-6-2008, Woods Hole, USA pp. 269-276..

Galli, M and Oyen, ML (2008) Spherical indentation of a finite poroelastic coating. Applied Physics Letters, 93. 031911-. ISSN 0003-6951

Griffiths, HJ and Harvey, JG and Dean, J and Curran, JA and Markaki, AE and Clyne, TW (2008) Characterisation of cell adhesion to substrate materials and the resistance to enzymatic and mechanical cell-removal. In: 2008 Conference on Materials Research Society Spring Meeting, 24-3-2008 to 28-3-2008, San Francisco, USA.

Groh, S and Olarnrithinun, S and Curtin, WA and Needleman, A and Deshpande, VS and van der Giessen, E (2008) Fatigue crack growth from a cracked elastic particle into a ductile matrix. Philosophical Magazine, 88. pp. 3565-3583. ISSN 1478-6435

Hari Babu, N and Iida, K and Shi, YH and Cardwell, DA (2008) Processing of bulk Sm-Ba-Cu-O nano-composite superconductors. Physica C: Superconductivity and its Applications, 468. pp. 1340-1344. ISSN 0921-4534

Hiralal, P and Unalan, HE and Wijayantha, KGU and Kursumovic, A and Jefferson, D and MacManus-Driscoll, JL and Amaratunga, GAJ (2008) Growth and process conditions of aligned and patternable films of iron(III) oxide nanowires by thermal oxidation of iron. NANOTECHNOLOGY, 19. -. ISSN 0957-4484

Hussein, MI and Borg, U and Niordson, CF and Deshpande, VS (2008) Plasticity size effects in voided crystals. J MECH PHYS SOLIDS, 56. pp. 114-131. ISSN 0022-5096

Idiart, MI and Fleck, NA (2008) The Effect of Interfaces on the Plastic Behaviour of Periodic Composites. Philosophical Magazine, 88. pp. 3633-3653. ISSN 1478-6435

Iida, K and Babu, NH and Shi, Y and Miyazaki, T and Sakai, N and Murakami, M and Cardwell, DA (2008) Single domain YBCO/Ag bulk superconductors fabricated by seeded infiltration and growth. Journal of Physics: Conference Series, 97. ISSN 1742-6588

Iida, K and Hari Babu, N and Miyazaki, T and Sakai, N and Murakami, M and Cardwell, DA (2008) Optimum processing conditions for the fabrication of large, single grain Ag-doped YBCO bulk superconductors. Materials Science and Engineering B: Solid State Materials for Advanced Technology, 151. pp. 2-6. ISSN 0921-5107

Iida, K and Hari Babu, N and Miyazaki, T and Sakai, N and Murakami, M and Cardwell, DA (2008) Single domain YBCO/Ag bulk superconductors fabricated by seeded infiltration and growth. Journal of Physics: Conference Series, 97. 012105-. ISSN 1742-6588

Iida, K and Hari Babu, N and Pathak, SK and Yeoh, WK and Miyazaki, T and Sakai, N and Murakami, M and Cardwell, DA (2008) The microstructure and properties of single grain bulk Ag-doped Y-Ba-Cu-O fabricated by seeded infiltration and growth. Physica C: Superconductivity and its Applications, 468. pp. 1387-1390. ISSN 0921-4534

Kermode, JR and Albaret, T and Sherman, D and Bernstein, N and Gumbsch, P and Payne, MC and Csanyi, G and De Vita, A (2008) Low-speed fracture instabilities in a brittle crystal. Nature, 455. pp. 1224-1227. ISSN 0028-0836

Lau, AG and Oyen, ML and Kent, RW and Murakami, D and Torigaki, T (2008) Indentation stiffness of aging human costal cartilage. Acta Biomaterialia, 4. pp. 97-103. ISSN 1742-7061

Laurent, P and Fagnard, JF and Vanderheyden, B and Hari Babu, N and Cardwell, DA and Ausloos, M and Vanderbemden, P (2008) An ac susceptometer for the characterisation of large, bulk superconducting samples. Measurement Science and Technology, 19. 085705-. ISSN 0957-0233

Le, HR and Williams, JA and Luo, JK (2008) Characterisation of tribological behaviour of silicon and ceramic coatings under repeated sliding at micro-scale. INT J SURF SCI ENG, 2. pp. 1-13. ISSN 1749-785X

Lee, JE-Y and Bahreyni, B and Seshia, AA (2008) Thin film monitoring with silicon bulk acoustic resonators. In: UNSPECIFIED pp. 581-584..

Lee, JE-Y and Seshia, AA (2008) Square wine glass mode resonator with quality factor of 4 million. In: UNSPECIFIED pp. 1257-1260..

Lee, JE-Y and Yan, J and Seshia, AA (2008) Anchor limited q in flexural mode resonators. In: UNSPECIFIED pp. 2213-2216..

Lee, JE-Y and Zhu, Y and Seshia, AA (2008) A bulk acoustic mode single-crystal silicon microresonator with a high-quality factor. Journal of Micromechanics and Microengineering, 18. ISSN 0960-1317

Lee, JEY and Bahreyni, B and Seshia, AA (2008) Thin film monitoring with silicon bulk acoustic resonators. In: 7th IEEE Conference on Sensors, 26-10-2008 to 29-10-2008, Lecce, Italy.

Lee, JEY and Bahreyni, B and Seshia, AA (2008) An axial strain modulated double-ended tuning fork electrometer. Sensors and Actuators A: Physical, 148. pp. 395-400. ISSN 0924-4247

Lee, JEY and Bahreyni, B and Zhu, Y and Seshia, AA (2008) A single-crystal-silicon bulk-acoustic-mode microresonator oscillator. IEEE Electron Device Letters, 29. pp. 701-703. ISSN 0741-3106

Lee, JEY and Seshia, AA (2008) 5MHz micromechanical silicon bulk mode resonator with quality factor exceeding 2 million. In: 19th Workshop on Micromachining, Micromechanics and Microsystems, 28-9-2008 to 30-9-2008, Aachen, Germany.

Lee, JEY and Seshia, AA (2008) Binary excitation of a high-Q bulk acoustic resonator by actuation polarity inversion. In: ASME Design, Dynamics and Control of MEMS and NEMS Symposium, 31-10-2008 to 6-11-2008, Boston, USA.

Lee, JEY and Seshia, AA (2008) Circular wine-glass mode disk resonator with Q of 2 million. In: 22nd International Conference EUROSENSORS, 7-9-2008 to 10-9-2008, Dresden, Germany.

Lee, JEY and Seshia, AA (2008) Enhanced electrical characterization of MEMS resonators using on-chip parasitic feedthrough self-cancellation. In: 22nd International Conference EUROSENSORS, 7-9-2008 to 10-9-2008, Dresden, Germany.

Lee, JEY and Seshia, AA (2008) Square wine-glass mode resonator with a Q-factor of 4 million. In: 7th IEEE Conference on Sensors, 26-10-2008 to 29-10-2008, Lecce, Italy.

Lee, JEY and Yan, J and Seshia, AA (2008) Anchor limited Q in flexural mode resonators. In: IEEE International Ultrasonics Symposium, ISU' 08, 2-11-2008 to 5-11-2008, Beijing, China pp. 2213-2216..

Lee, JEY and Yan, J and Seshia, AA (2008) Quality factor enhancement of bulk acoustic mode resonators through anchor geometry design. In: 22nd International Eurosensors Conference, --2008 to --, Dresden, Germany.

Lee, JEY and Zhu, Y and Seshia, AA (2008) Bulk acoustic mode single crystal silicon resonator with high quality factor. Journal of Micromechanics and Microengineering, 18. 064001-. ISSN 0960-1317

Lee, JEY and Zhu, Y and Seshia, AA (2008) Room temperature electrometry with sub-10 electron charge resolution. Journal of Micromechanics and Microengineering, 18. 025033-. ISSN 0960-1317

Lee, JEY and Zhu, Y and Seshia, AA (2008) A micromechanical electrometer approaching single electron charge resolution at room temperature. In: 21st IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2008), 13-1-2008 to 17-1-2008, Tucson, AZ, USA pp. 948-951..

Li, ZY and Tang, T and U King Im, J and Graves, M and Sutcliffe, MPF and Gillard, JH (2008) Assessment of carotid plaque vulnerability using structural and geometric determinants. Circulation Journal, 72. pp. 1092-1099. ISSN 1346-9843

Li, ZY and Taviani, V and Tang, TY and Graves, MJ and U King–Im, JM and Sutcliffe, MPF and Gillard, JH (2008) The haemodynamic effects of in tandem carotid artery stenosis: implications for carotid endarterectomy. In: 3rd International symposium on Biomechanics in Vascular Biology and Cardiovascular Disease, 24-4-2008 to 25-4-2008, Rotterdam, Netherlands.

Liu, F and Sutcliffe, MPF and Graham, WR (2008) Modelling of tread block contact mechanics using linear viscoelastic theory. Tire Science and Technology, 36. pp. 211-226.

Lucas, SR and Bass, CR and Salzar, RS and Oyen, ML and Planchak, C and Ziemba, A and Shender, BS and Paskoff, G (2008) Viscoelastic properties of the cervical spine under fast strain rate deformations. Acta Biomaterialia, 4. pp. 117-125. ISSN 1742-7061

Luo, JK and Fu, YQ and Huang, QA and Williams, JA and Milne, WI (2008) Degradation evaluation of microelectromechanical thermal actuators. Proceedings of SPIE - The International Society for Optical Engineering, 6884. ISSN 0277-786X

Markaki, AE and Clyne, TW (2008) Stainless steel sandwich sheets with fibrous metal cores. In: Automotive Engineering: Lightweight, Functional and Novel Materials. Series in Materials Science and Engineeing . Taylor & Francis, pp. 149-175.

McShane, GJ and Stewart, C and Aronson, MT and Wadley, HNG and Fleck, NA and Deshpande, VS (2008) Dynamic rupture of polymer-metal bilayer plates. INT J SOLIDS STRUCT, 45. pp. 4407-4426. ISSN 0020-7683

Monroy Aceves, C and Skordos, AA and Sutcliffe, MPF (2008) Design selection methodology for composite structures. Materials and Design, 29. pp. 418-426. ISSN 0261-3069

Oyen, ML (2008) Indentation of nonlinearly viscoelastic solids. In: UNSPECIFIED pp. 99-104..

Oyen, ML (2008) Interest in bone-like materials includes thermal qualities - Response. MRS BULL, 33. p. 725. ISSN 0883-7694

Oyen, ML (2008) Letter to the editor. MRS Bulletin, 33. p. 725. ISSN 0883-7694

Oyen, ML (2008) Poroelastic nanoindentation responses of hydrated bone. Journal of Materials Research, 23. pp. 1307-1314. ISSN 0884-2914

Oyen, ML (2008) Relating viscoelastic nanoindentation creep and load relaxation experiments. International Journal of Materials Research, 99. pp. 823-828. ISSN 1862-5282

Oyen, ML (2008) The materials science of bone: lessons from nature for biomimetic materials synthesis. MRS Bulletin (Materials Research Society), 33. pp. 49-55. ISSN 0883-7694

Oyen, ML and Ferguson, VL and Bembey, AK and Bushby, AJ and Boyde, A (2008) Composite bounds on the elastic modulus of bone. Journal of Biomechanics, 41. pp. 2585-2588. ISSN 0021-9290

Oyen, ML and Ko, CC (2008) Indentation variability of natural nanocomposite materials. Journal of Materials Research, 23. pp. 760-767. ISSN 0884-2914

Oyen, ML and Liu, KK and Wan, KT (2008) Viscoelastic behavior of a centrally loaded circular film being clamped at the circumference. In: UNSPECIFIED pp. 157-162..

Palau, A and Dinner, R and Durrell, JH and Blamire, MG (2008) Vortex breaking and cutting in type II superconductors. PHYS REV LETT, 101. -. ISSN 0031-9007

Pane, I and Fleck, NA and Chu, DP and Huber, JE (2008) Predicted performance of ferroelectric memory capacitators under mechanical constraint. Ferroelectrics, 370. pp. 219-225. ISSN 0015-0193

Pane, I and Fleck, NA and Huber, JE and Chu, DP (2008) Effect of geometry upon the performance of a thin film ferroelectric capacitor. INT J SOLIDS STRUCT, 45. pp. 2024-2041. ISSN 0020-7683

Pathak, A and Deshpande, VS and McMeeking, RM and Evans, AG (2008) The simulation of stress fibre and focal adhesion development in cells on patterned substrates. J R Soc Interface, 5. pp. 507-524. ISSN 1742-5689

Pathak, SK and Hari Babu, N and Iida, K and Strasik, M and Cardwell, DA (2008) The effect of Ag and Y-24W1 addition on the microstructure and superconducting properties of single grain Y-Ba-Cu-O. Materials Science and Engineering B: Solid State Materials for Advanced Technology, 151. pp. 40-46. ISSN 0921-5107

Pedarnig, JD and Heitz, J and Stehree, T and Praher, B and Viskup, R and Siraj, K and Moser, A and Vlad, A and Bodea, MA and Bauerle, D and Hari Babu, N and Cardwell, DA (2008) Characterization of nano-composite oxide ceramics and monitoring of oxide thin film growth by laser-induced breakdown spectroscopy. Spectrochimica Acta Part B: Atomic Spectroscopy, 63. pp. 1117-1121. ISSN 0584-8547

Phani, AS and Fleck, NA (2008) Elastic boundary layers in two-dimensional isotropic lattices. In: UNSPECIFIED pp. 495-504..

Plank, NOV and Welland, ME and MacManus-Driscoll, JL and Schmidt-Mende, L (2008) The backing layer dependence of open circuit voltage in ZnO/polymer composite solar cells. In: UNSPECIFIED pp. 7218-7222..

Ransley, JHT and Aziz, A and Durkan, C and Seshia, AA (2008) Silicon depletion layer actuators. APPL PHYS LETT, 92. -. ISSN 0003-6951

Ransley, JHT and Aziz, A and Durkan, C and Seshia, AA (2008) Silicon depletion layer actuators. Applied Physics Letters, 92. 184103-. ISSN 0003-6951

Rubino, V and Deshpande, VS and Fleck, NA (2008) The collapse response of sandwich beams with a Y-frame core subjected to distributed and local loading. International Journal of Mechanical Sciences, 50. pp. 233-246. ISSN 0020-7403

Rubino, V and Deshpande, VS and Fleck, NA (2008) The dynamic response of end-clamped sandwich beams with a Y-frame or corrugated core. INT J IMPACT ENG, 35. pp. 829-844. ISSN 0734-743X

Russell, BP and Deshpande, VS and Wadley, HNG (2008) Quasistatic deformation and failure modes of composite square honeycombs. Journal of the Mechanics of Materials and Structures, 3. pp. 1315-1340.

Schöppl, KR and Weber, HW and Durrell, JH (2008) Angular dependence of critical currents in YBa 2Cu 3O 7-δ vicinal films. In: UNSPECIFIED -..

Shi, Y and Babu, NH and Iida, K and Cardwell, DA (2008) Superconducting properties of Gd-Ba-Cu-O single grains processed from a new, Ba-rich precursor compound. Journal of Physics: Conference Series, 97. ISSN 1742-6588

Shi, YH and Hari Babu, N and Iida, K and Cardwell, DA (2008) Superconducting properties of Gd-Ba-Cu-O single grains processed from a new, ba-rich precursor compound. Journal of Physics: Conference Series, 97. 012250-. ISSN 1742-6588

Shi, YH and Hari Babu, N and Iida, K and Cardwell, DA (2008) The possibility of negative substitution (x) in melt-processed Gd1+xBa2−xCu3O7−δ GdBCO bulk superconductors. Physica C: Superconductivity and its Applications, 468. pp. 1408-1410. ISSN 0921-4534

Shu, W and Laurenson, S and Knowles, TPJ and Ko Ferrigno, P and Seshia, AA (2008) Highly specific label-free protein detection from lysed cells using internally referenced microcantilever sensors. Biosensors and Bioelectronics, 24. pp. 233-237. ISSN 0956-5663

Shu, WM and Laurenson, S and Knowles, TPJ and Ferrigno, PK and Seshia, AA (2008) Highly specific label-free protein detection from lysed cells using internally referenced microcantilever sensors. BIOSENS BIOELECTRON, 24. pp. 233-237. ISSN 0956-5663

Siraj, K and Pedarnig, JD and Moser, A and Bauerle, D and Hari Babu, N and Cardwell, DA (2008) Enhanced self-field critical current density of nano-composite YBa2Cu3O7 thin films grown by pulsed laser deposition. Europhysics Letters, 82. 57006-. ISSN 0295-5075

Skordos, AA and Sutcliffe, MPF (2008) Stochastic simulation of woven composites forming. Composites Science and Technology, 68. pp. 283-296. ISSN 0266-3538

Spuskanyuk, AV and McMeeking, RM and Deshpande, VS and Arzt, E (2008) The effect of shape on the adhesion of fibrillar surfaces. Acta Biomater, 4. pp. 1669-1676.

Srikantha Phani, A and Fleck, NA (2008) Elastic boundary layers in two-dimensional isotropic lattices. Transactions of the ASME, Journal of Applied Mechanics, 75. 021020-021028. ISSN 0021-8936

Sutcliffe, MPF and Maguire, JJ and Davenport, AP (2008) Correlation of the pharmacological response of human normal and diseased coronary arteries to endothelin-1 with passive stiffness. In: 3rd International Symposium on Biomechanics in Vascular Biology and Cardiovascular Disease, 24-4-2008 to 25-4-2008, Rotterdam, Netherlands.

Symons, DD and Fleck, NA (2008) The imperfection sensitivity of isotropic two-dimensional elastic lattices. Transactions of the ASME, Journal of Applied Mechanics, 75. 151011-. ISSN 0021-8936

Tagarielli, VL and Deshpande, VS and Fleck, NA (2008) The high strain rate response of PVC foams and end-grain balsa wood. COMPOS PART B-ENG, 39. pp. 83-91. ISSN 1359-8368

Taviani, V and Li, ZY and Young, V and Sutcliffe, MPF and Wong, P and Graves, MJ and Gillard, JH (2008) In vivo non-invasive high-resolution MR-phase-contrast-based determination of time-dependent elastic modulus in healthy arteries. In: 3rd International Symposium on Biomechanics in Vascular Biology and Cardiovascular Disease, 24-4-2008 to 25-4-2008, Rotterdam, Netherlands.

Taviani, V and Li, ZY and Young, V and Sutcliffe, MPF and Wong, P and Graves, MJ and Gillard, JH (2008) In vivo MRI-based estimation of time-dependent elastic modulus in healthy arteries. In: ASME 2008 Summer Bioengineering Conference (SBC2008), 25-6-2008 to 29-6-2008, Marco Island, Florida, USA.

Taviani, V and Sutcliffe, MPF and Wong, P and Li, ZY and Young, V and Graves, MJ and Gillard, JH (2008) In vivo non-invasive high resolution MR-based method for the determination of the elastic modulus of arterial vessels. In: 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC'08, 20-8-2008 to 24-8-2008, Vancouver, British Columbia, Canada.

Wei, Z and Deshpande, VS and Evans, AG (2008) Mechanisms and mechanics governing in indentation of polycrystalline alumina. Journal of the American Ceramic Society, 91. pp. 2987-2996. ISSN 0002-7820

Wei, Z and Deshpande, VS and Evans, AG and Dharmasena, KP and Queheillalt, DT and Wadley, HNG and Murty, YV and Elzey, RK and Dudt, P and Chen, Y and Knight, D and Kiddy, K (2008) The resistance of metallic plates to localized impulse. J MECH PHYS SOLIDS, 56. pp. 2074-2091. ISSN 0022-5096

Williams, JA and Kauzlarich, JJ (2008) Application of the bulk properties of a silicone PSA to peeling. International Journal of Adhesion and Adhesives, 28. pp. 192-198. ISSN 0143-7496

Williams, JA and Spearing, SM (2008) Guest editorial: Special issue on microsystems technology. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222. i-ii. ISSN 0954-4062

Williams, JA and Spearing, SM (2008) Special issue on microsystems technology. P I MECH ENG C-J MEC, 222. I-II. ISSN 0954-4062

Withnell, TD and Hari Babu, N and Ganney, I and Dennis, A and Cardwell, DA (2008) High-field flux mapping of (RE)BCO bulk superconductors—Development of an in situ scanning system. Materials Science and Engineering B: Solid State Materials for Advanced Technology, 151. pp. 79-83. ISSN 0921-5107

Wyart, M and Liang, H and Kabla, AJ and Mahadevan, L (2008) Elasticity of floppy and stiff random networks. Physical Review Letters, 101. 215501-. ISSN 0031-9007

Yan, J and Seshia, AA (2008) Internal phase inversion narrow bandwidth MEMS filter. In: IEEE International Ultrasonics Symposium, 2-11-2008 to 5-11-2008, Beijing, China.

Yan, J and Seshia, AA (2008) Thermoelastic dissipation in MEMS/NEMS flexural vibration resonators. Journal of Nanoscience and Nanotechnology. ISSN 1533-4880

Yan, J and Seshia, AA and Le Phan, K and van Beek, JTM (2008) Internal Phase Inversion Narrow Bandwidth MEMS Filter. In: UNSPECIFIED pp. 705-708..

Yan, J and Seshia, AA and Phan, KL and van Beek, JTM (2008) Internal electrical phase inversion for FF-beam resonator arrays and tuning fork filters. In: 21st IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2008), 13-1-2008 to 17-1-2008, Tucson, AZ, USA pp. 1028-1031..

Yan, J and Seshia, AA and Phan, KL and van Beek, JTM (2008) Mechanical phase inversion for coupled lamé mode resonator array filters. In: 21st IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2008), 13-1-2008 to 17-1-2008, Tucson, AZ, USA pp. 1024-1027..

Zhu, Y and Lee, JE-Y and Seshia, AA (2008) A resonant micromachined electrostatic charge sensor. IEEE Sensors Journal, 8. pp. 1499-1505. ISSN 1530-437X

Zumpano, Z and Fox, M and Stronge, WJ and Sutcliffe, MPF (2008) Impact damage in hybrid braided twill composites. Journal of Materials Science, 43. pp. 6668-6675. ISSN 0022-2461

2007

Akrap, A and Weller, T and Ellerby, M and Saxena, SS and Csanyi, G and Forro, L (2007) C6Yb and graphite: A comparative high-pressure transport study. PHYS REV B, 76. -. ISSN 1098-0121

Akrap, A and Weller, T and Ellerby, M and Saxena, SS and Csányi, G and Forro, L (2007) C6Yb and graphite:a comparative high-pressure transport study. Physical Review B: Condensed Matter and Materials Physics, 76. 045426-045431. ISSN 1098-0121

Ashby, MF and Shercliff, HR and Cebon, D (2007) Materials: engineering, science, processing and design. Elsevier Butterworth-Heinemann.

Balint, DS and Deshpande, VS and Needleman, A and Van der Giessen, E (2007) Discrete dislocation plasticity analysis of the Hall-Petch effect. International Journal of Plasticity. ISSN 0749-6419

Bass, CR and Lucas, SR and Salzar, RS and Oyen, ML and Planchak, C and Shender, BS and Paskoff, G (2007) Failure properties of cervical spinal ligaments under fast strain rate deformations. Spine, 32. E7-E13. ISSN 0362-2436

Beaumont, PWR (2007) Hierarchy of multi-scale modelling: solving problems in composite failure. In: International Conference on Composite Materials, 9-4-2007 to 12-4-2007, University of Sheffield, UK.

Beaumont, PWR (2007) Hierarchy of multi-scale modelling: solving problems in composite failure. In: 2nd International Conference on Composite Materials, -2-2007 to --, New Delhi, India.

Bolognini, F and Seshia, AA and Shea, K (2007) Exploring the application of a multi-domain simulation-based computational synthesis method in MEMS design. In: 16th International Conference on Engineering Design (ICED'07), 28-8-2007 to 31-8-2007, Paris, France.

Bolognini, F and Seshia, AA and Shea, K (2007) A computational design method for MEMS using COMSOL. In: European COMSOL Conference 2007, 23-10-2007 to 24-10-2007, Grenoble, France.

Bolognini, F and Seshia, AA and Shea, K (2007) Exploring the use of multi-domain computational synthesis in MEMS design: an algorithmic simulation-based method. In: 16 th International Conference on Engineering Design, ICED' 2007, 28-8-2007 to 31-8-2007, Paris, France.

Borg, U and Fleck, NA (2007) Strain gradient effects in surface roughening. Modelling and Simulation in Materials Science and Engineering, 15. S1-S12. ISSN 0965-0393

Brown, P and Marston, L and Dean, J and Tan, JC and Markaki, AE and Clyne, TW (2007) Stainless steel sandwich - Fibrecore, a metallic sandwich sheet material. Materials World Magazine, 15. pp. 26-28. ISSN 0967-8638

Calvin, SE and Oyen, ML (2007) Microstructure and mechanics of the chorioamnion membrane with an emphasis on fracture properties. Annals of the New York Academy of Sciences, 1101. pp. 166-185. ISSN 0077-8923

Cardwell, DA (2007) Of material value and built to last (Reviews of five text books). Times Higher Education Supplement. pp. 2-3.

Cardwell, DA and Hari Babu, N (2007) Improved magnetic flux Pinning in bulk (RE)BCO superconductors. In: Transactions of the International Cryogenic Materials Conference - ICMC, 16-7-2007 to 20-7-2007, Chattanooga, Tennessee -..

Cardwell, DA and Weber, HW (2007) Flux pinning and other related phenomena in type-II superconductors. Superconductor Science and Technology, 20. ISSN 0953-2048

Chung, JG and Chang, SH and Sutcliffe, MPF (2007) Deformation and energy absorption of composite egg-box panels. Composites Science and Technology, 67. pp. 2342-2349. ISSN 0266-3538

Cole, DJ and Payne, MC and Csányi, G and Spearing, SM and Colombi Ciacchi, L (2007) Development of a classical force field for the oxidized Si surface: application to hydrophilic wafer bonding. Journal of Chemical Physics, 127. 204704-. ISSN 0021-9606

Colegrove, PA and Shercliff, HR and Zettler, R (2007) Model for predicting heat generation and temperature in friction stir welding from the material properties. SCI TECHNOL WELD JOI, 12. pp. 284-297. ISSN 1362-1718

Cook, RF and Oyen, ML (2007) Nanoindentation behavior and mechanical properties measurement of polymeric materials. International Journal of Materials Research, 2007. pp. 370-378. ISSN 1862-5282

Cook, RF and Oyen, ML (2007) Nanoindentation behavior and mechanical properties measurement of polymeric materials. INT J MATER RES, 98. pp. 370-378. ISSN 1862-5282

Cote, F and Biagi, R and Bart Smith, H and Deshpande, VS (2007) Structural response of pyramidal core sandwich columns. International Journal of Solids and Structures, 44. pp. 3533-3556. ISSN 0020-7683

Cote, F and Deshpande, VS and Fleck, NA (2007) Shear fatigue strength of a prismatic diamond sandwich core. Scripta Materialia, 56. pp. 585-588. ISSN 1359-6462

Csanyi, G and Moras, G and Kermode, JR and Payne, MC and Mainwood, A and De Vita, A (2007) Multiscale modeling of defects in semiconductors: A novel molecular-dynamics scheme. TOP APPL PHYS, 104. pp. 193-212. ISSN 0303-4216

Csanyi, G and Pickard, CJ and Simons, BD and Needs, RJ (2007) Graphite intercalation compounds under pressure: A first-principles density functional theory study. Physical Review B: Condensed Matter and Materials Physics, 75. p.085432-p.085432. ISSN 1098-0121

Csányi, G and Pickard, CJ and Simons, BD and Needs, RJ (2007) Graphite intercalation compounds under pressure: A first-principles density functional theory study. Physical Review B: Condensed Matter and Materials Physics, 75. 085432-. ISSN 1098-0121

Côté, F and Fleck, NA and Deshpande, VS (2007) Fatigue performance of sandwich beams with a pyramidal core. International Journal of Fatigue, 29. pp. 1402-1412. ISSN 0142-1123

Deshpande, VS and Balint, DS and Needleman, A and Van der Giessen, E (2007) Size effects in single asperity frictional contacts. Modelling and Simulation in Materials Science and Engineering, 15. S97-S108. ISSN 0965-0393

Deshpande, VS and McMeeking, RM and Evans, AG (2007) A model for the contractility of the cytoskeleton including the effects of stress fiber formation and dissociation. Proceedings of the Royal Society, Series A: Mathematical Physical and Engineering Sciences, 463. pp. 787-815. ISSN 1364-5021

Deshpande, VS and McMeeking, RM and Evans, AG (2007) A model for the contractility of the cytoskeleton including the effects of stress-fibre formation and dissociation. P R SOC A, 463. pp. 787-815. ISSN 1364-5021

Deshpande, VS and Mrksich, M and McMeeking, RM and Evans, AG (2007) A bio-mechanical model for coupling cell contractility with focal adhesion formation. Journal of the Mechanics and Physics of Solids. ISSN 0022-5096

Deshpande, VS and Needleman, A and Van Der Giessen, E (2007) Chapter 71 Discrete Dislocation Plasticity Modeling of Contact and Friction. Dislocations in Solids, 13. pp. 1-46. ISSN 1572-4859

Deshpande, VS and Needleman, A and van der Giessen, E (2007) Discrete dislocation modelling of contact and friction. In: Dislocations in Solids. Dislocations in Solids, 13 . Elsevier Science, Amsterdam; Oxford, pp. 1-46.

Domenzain, W and Seshia, AA (2007) Rapid prototyping of PDMS-based microfluid devices with applications to protein crystallisation. In: 5th ASME ICNMM Conference, 18-6-2007 to 20-6-2007, Universidad De Las Americas Puebla, Mexico.

Durrell, JH and Feldmann, DM and Cantoni, C (2007) Suppression of vortex channeling in meandered YBa2Cu3O7-delta grain boundaries. APPL PHYS LETT, 91. -. ISSN 0003-6951

Feldmann, DM and Holesinger, TG and Feenstra, R and Cantoni, C and Zhang, W and Rupich, M and Li, X and Durrell, JH and Gurevich, A and Larbalestier, DC (2007) Mechanisms for enhanced supercurrent across meandered grain boundaries in high-temperature superconductors. J APPL PHYS, 102. -. ISSN 0021-8979

Finnegan, K and Kooistra, GW and Wadley, HNG and Deshpande, VS (2007) The compressive response of carbon fiber composite pyramidal truss sandwich cores. International Journal of Materials Research, 98. pp. 1264-1272. ISSN 1862-5282

Fleck, NA and Qiu, X (2007) The damage tolerance of elastic-brittle, two dimensional isotropic lattices. Journal of the Mechanics and Physics of Solids, 55. pp. 562-588.

Ghoshal, P and Coombs, TA and Fair, R and Campbell, AM (2007) Experimental set up to measure AC losses of HTS in rotating magnetic field. IEEE Transactions on Applied Superconductivity ASC, 17. pp. 3199-3202. ISSN 1051-8223

Gonzalez-Domenzain, W and Seshia, AA (2007) Rapid prototyping of PDMS devices with applications to protein crystallization. In: UNSPECIFIED pp. 519-526..

Hari Babu, N and Iida, K and Briffa, A and Shi, YH and Matthews, L and Cardwell, DA (2007) Bulk superconducting nanocomposites with high critical current densities. IEEE Transactions on Applied Superconductivity ASC, 17. pp. 2953-2956. ISSN 1051-8223

Hari Babu, N and Iida, K and Cardwell, DA (2007) Flux pinning in melt-processed nanocomposite single-grain superconductors. Superconductor Science and Technology, 20. S141-S146. ISSN 0953-2048

Hari Babu, N and Withnell, TD and Iida, K and Cardwell, DA (2007) Strongly coupled artificial bulk HTS grain boundaries with high critical current densities. IEEE Transactions on Applied Superconductivity ASC, 17. pp. 2949-2952. ISSN 1051-8223

Hong, Z and Campbell, AM and Coombs, TA (2007) Computer modelling of magnetisation in high temperature bulk superconductors. IEEE Transactions on Applied Superconductivity, 17. pp. 3761-3764. ISSN 1051-8223

Hussein, MI and Borg, U and Niordson, CF and Deshpande, VS (2007) Plasticity size effects in voided crystals. Journal of the Mechanics and Physics of Solids. ISSN 0022-5096

Iida, K and Hari Babu, N and Cardwell, DA (2007) Silver-doped Y-Ba-Cu-O bulk superconductors fabricated by seeded infiltration and growth. Superconductor Science and Technology, 20. pp. 1065-1070. ISSN 0953-2048

Iida, K and Hari Babu, N and Shi, YH and Matthews, LS and Miyazaki, T and Sakai, N and Murakami, M and Cardwell, DA (2007) Phase stability of MgOd-doped Nd-Ba-Cu-O seed crystals for cold-seeded OCMG processing. Physica C: Superconductivity, 463-46. pp. 340-343. ISSN 0921-4534

J K, L and Y Q, F and H R, L and J A, W and S M, S and W I, M (2007) Diamond and diamond-like carbon MEMS. Journal of Micromechanics and Microengineering, 17. S147-S163. ISSN 0960-1317

Kabla, AJ and Debregeas, G (2007) Quasistatic rheology of foams: I. Oscillating strain. Journal of Fluid Mechanics, 587. pp. 23-44. ISSN 0022-1120

Kabla, AJ and Mahadevan, L (2007) Nonlinear mechanics of soft fibre networks. Journal of the Royal Society Interface, 4. pp. 99-106.

Kabla, AJ and Scheibert, J and Debregeas, G (2007) Quasistatic rheology of foams: II. Continuous shear flow. Journal of Fluid Mechanics, 587. pp. 45-72.

Kazemahvazi, S and Radford, D and Deshpande, VS and Fleck, NA (2007) Dynamic failure of clamped circular plates subjected to an underwater shock. Journal of Mechanics and Materials Structures, 2. pp. 2007-2023. ISSN 1559-3959

Kis, A and Csanyi, G and Vrbanic, D and Mrzel, A and Mihailovic, D and Kulik, A and Forro, L (2007) Nanomechanical investigation of Mo6S9-xIx nanowire bundles. Small, 3. pp. 1544-1548. ISSN 1613-6810

Koblischka Veneva, A and Koblischka, MR and Hari Babu, N and Cardwell, DA and Mücklich, F (2007) Crystallographic orientation of Y2Ba4CuMOx (M = Nb, Zr, Ag) nanoparticles embedded in bulk melt-textured YBCO studied by EBSD. Journal of the American Ceramic Society, 90. pp. 2582-2588. ISSN 0002-7820

Kooistra, GW and Deshpande, VS and Wadley, HNG (2007) Hierarchical corrugated core sandwich panel concepts. Transactions of the ASME, Journal of Applied Mechanics, 74. pp. 259-268. ISSN 0021-8936

Lee, JE-Y and Bahreyni, B and Zhu, Y and Seshia, AA (2007) Ultrasensitive mass balance based on a bulk acoustic mode single-crystal silicon resonator. Applied Physics Letters, 91. ISSN 0003-6951

Lee, JEY and Bahreyni, B and Zhu, Y and Seshia, AA (2007) Ultra-sensitive mass balance based on a bulk acoustic mode single-crystal silicon resonator. Applied Physics Letters, 91. 234103-. ISSN 0003-6951

Lee, JEY and Zhu, Y and Seshia, AA (2007) High Q bulk acoustic mode resonator operating at ambient pressure. In: 18th Workshop on Micromachining, Micromechanics and Microsystems, 16-9-2007 to 18-9-2007, Guimaraes, Portugal.

Lee, JEY and Zhu, Y and Seshia, AA (2007) Sub-10 electron charge resolution for room temperature electrometry. In: 6th IEEE Inernational Conference on Sensors, 28-10-2007 to 31-10-2007, Atlanta, GA, USA.

Linguraru, MG and Kabla, A and Vasilyev, NV and Del Nido, PJ and Howe, RD (2007) Real-time block flow tracking of atrial septal defect motion in 4D cardiac ultrasound. 2007 4th IEEE International Symposium on Biomedical Imaging: From Nano to Macro - Proceedings. pp. 356-359.

Linguraru, MG and Kabla, AJ and Marx, GR and del Nido, PJ and Howell, RD (2007) Real-time tracking and shape analysis of atrial septal defects in 3D echocardiography. Academic Radiology, 14. pp. 1298-1309. ISSN 1076-6332

Liu, F and Sutcliffe, MPF (2007) Modelling of delamination of ultra low-k material during chemical mechanical polishing. Tribology Letters, 25. pp. 225-236. ISSN 1023-8883

Liu, F and Sutcliffe, MPF and Graham, WR (2007) Prediction of tread block forces for free-rolling tyres. In: 26th Annual Meeting and Conference on Fire Science and Technology, 25-9-2007 to 26-9-2007, Akron, OH, USA.

Mai, SP and Fleck, NA and Lu, TJ (2007) Optimal design of box-section sandwich beams in three-point bending. International Journal of Solids and Structures, 44. pp. 4742-4769. ISSN 0020-7683

Majoros, M and Ye, L and Campbell, AM and Coombs, TA and Velichko, AV and Astill, DM and Sargent, PM and Haslett, M and Sumption, MD and Collings, EW and Tomsic, M and Harrison, S and Husband, M (2007) Fault current limiting properties of MgB2 superconducting wires. IEEE Transactions on Applied Superconductivity, 17. pp. 1764-1767. ISSN 1051-8223

McGarry, JP and Chen, CS and Deshpande, VS and McMeeking, RM and Evans, AG (2007) Cells on a bed of micro-needles: Modeling of the scaling of the response. In: UNSPECIFIED pp. 401-402..

McMeeking, RM and Spuskanyuk, AV and He, MY and Deshpande, VS and Fleck, NA and Evans, AG (2007) An analytical model for the response to water blast of unsupported metallic sandwich panels. International Journal of Solids and Structures. ISSN 0020-7683

McShane, GJ and Boutchich, M and Phani, S and Moore, DF and Lu, TJ (2007) Micro-cantilevers for thin films: Young's modulus. In: UNSPECIFIED pp. 71-83..

McShane, GJ and Deshpande, VS and Fleck, NA (2007) The underwater blast resistance of metallic sandwich beams with prismatic lattice cores. Transactions of the ASME Journal of Applied Mechanics, 74. pp. 352-364. ISSN 0021-8936

McShane, GJ and Stewart, C and Aronson, MT and Wadley, HNG and Fleck, NA and Deshpande, VS (2007) Dynamic rupture of polymer-metal bilayer plates. International Journal of Solids and Structures. ISSN 0020-7683

Moras, G and Ciacchi, LC and Csanyi, G and De Vita, A (2007) Modelling (100) hydrogen-induced platelets in silicon with a multi-scale molecular dynamics approach. In: UNSPECIFIED pp. 16-20..

Muscroft, RJM and Sims Williams, DB and Cardwell, DA (2007) The development of a passive magnetic levitation system for wind tunnel models. SAE Transactions, 115. pp. 415-419. ISSN 0096-736X

Needleman, A and Van der Giessen, E and Deshpande, VS (2007) Discrete dislocation modeling of plastic flow processes. Key Engineering Materials, 340-34. pp. 31-38. ISSN 1013-9826

Obrezanova, O and Csányi, G and Gola, JMR and Segall, MD (2007) Gaussian processes: a method for automatic QSAR modeling of ADME properties. Journal of Chemical Information and Modeling, 47. pp. 1847-1857. ISSN 1549-9596

Oyen, ML (2007) Sensitivity of polymer nanoindentation creep properties to experimental variables. Acta Materialia, 55. pp. 3633-3639. ISSN 1359-6454

Oyen, ML and Bushby, AJ (2007) Viscoelastic effects in small-scale indentation of biological materials. International Journal of Surface Science and Engineering, 1. pp. 180-197. ISSN 1749-785X

Oyen, ML and Ferguson, VL and Calvin, SE (2007) Fracture resistance of human amnion. In: UNSPECIFIED pp. 841-842..

Oyen, ML and Ko, CC (2007) Examination of local variations in viscous, elastic, and plastic indentation responses in healing bone. Journal of Materials Science: Materials in Medicine, 18. pp. 623-628. ISSN 0957-4530

Pane, I and Fleck, NA and Huber, JE and Chu, DP (2007) Effect of geometry upon the performance of a thin film ferroelectric capacitor. International Journal of Solids and Structures. ISSN 0020-7683

Pardo, E and Durrell, JH and Blamire, MG (2007) Vortex deformation and breaking in superconductors: a microscopic description. Philosophical Magazine, 87. pp. 4359-4381. ISSN 1478-6435

Pathak, A and Deshpande, VS and McMeeking, RM and Evans, AG (2007) Simulation of the coupling of cell contractility and focal adhesion formation. In: UNSPECIFIED pp. 263-264..

Pathak, A and Deshpande, VS and McMeeking, RM and Evans, AG (2007) The simulation of stress fibre and focal adhesion development in cells on patterned substrates,. Journal of the Royal Society Interface.

Queheillalt, DT and Deshpande, VS and Wadley, HNG (2007) Truss waviness effects in cellular lattice structures. J MECH MATER STRUCT, 2. pp. 1657-1675. ISSN 1559-3959

Queheillalt, DT and Deshpande, VS and Wadley, HNG (2007) Waviness effects in diamond and square oriented metallic cellular sandwich cores. Journal of the Mechanics of Materials and Structures, 2. pp. 1657-1670.

Quintana Alonso, I and Fleck, NA (2007) Damage tolerance of an elastic-brittle diamond-celled honeycomb. Scripta Materialia, 56. pp. 693-696.

Quintana Alonso, I and Fleck, NA (2007) The damage tolerance of a sandwich panel containing a cracked honeycomb core. Transactions of the ASME, Journal of Applied Mechanics. ISSN 0021-8936

Radford, DD and McShane, GJ and Deshpande, VS and Fleck, NA (2007) Dynamic compressive response of stainless-steel square honeycombs. Transactions of the ASME, Journal of Applied Mechanics, 74. pp. 658-667. ISSN 0021-8936

Ransley, JHT and Durkan, C and Seshia, AA (2007) A depletion layer actuator. In: UNSPECIFIED U705-U706..

Ransley, JHT and Durkan, C and Seshia, AA (2007) A depletion layer actuator. In: International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS 2007), 10-6-2007 to 14-6-2007, Lyon, France pp. 1393-1396..

Romijn, NER and Fleck, NA (2007) The fracture toughness of planar lattices: imperfection sensitivity. Journal of the Mechanics and Physics of Solids, 55. ISSN 0022-5096

Rubino, V and Deshpande, VS and Fleck, NA (2007) The dynamic response of end-clamped sandwich beams with a Y-frame or corrugated core. International Journal of Impact Engineering. ISSN 0734-743X

Schoppl, KR and Weber, HW and Durrell, JH (2007) Angular dependence of critical currents across YBa2Ca3O7-delta low-angle grain boundaries. In: UNSPECIFIED pp. 1188-1189..

Scott, P and Lees, JM and Sutcliffe, MPF (2007) Novel modelling of solution uptake in CFRP tendons. In: The 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, FRPRCS' 07, 16-7-2007 to 18-7-2007, Patras, Greece pp. 516-519..

Shercliff, HR and Colegrove, PA (2007) Process Modeling. In: Friction Stir Welding and Processing. ASM International, USA, pp. 187-217.

Shi, YH and Hari Babu, N and Iida, K and Cardwell, DA (2007) Growth rate and superconducting properties of Gd-Ba-Cu-O bulk superconductors melt processed in air. IEEE Transactions on Applied Superconductivity ASC, 17. pp. 2984-2987. ISSN 1051-8223

Shi, YH and Hari Babu, N and Iida, K and Cardwell, DA (2007) Properties of GdBCO bulk superconductors melt-processed in air using a Mg-doped Nd–Ba–Cu–O generic seed crystal. Superconductor Science and Technology, 20. pp. 38-43.

Shu, W and Laue, ED and Seshia, AA (2007) Investigation of biotin-streptavidin binding interactions using microcantilever sensors. Biosensors and Bioelectronics, 22. pp. 2003-2009. ISSN 0956-5663

Shu, WM and Laue, ED and Seshia, AA (2007) Investigation of biotin-streptavidin binding interactions using microcantilever sensors. In: UNSPECIFIED pp. 2003-2009..

Skordos, AA and Monroy Aceves, C and Sutcliffe, MPF (2007) A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites. Composites Part A, 38. pp. 1318-1330. ISSN 1359-835X

Spuskanyuk, AV and McMeeking, RM and Deshpande, VS and Arzt, E and Evans, AG (2007) The effect of shape on the adhesion of fibrillar surfaces. Transactions of the ASME, Journal of Applied Mechanics. ISSN 0021-8936

Sullivan, A and Robson, JD and Shercliff, HR and McShane, G (2007) Process modelling of friction stir welding for aerospace aluminium alloys. In: 5th International Conference on Processing and Manufacturing of Advanced Materials; THERMEC 2006 Supplement, -7-2006 to --, Vancover, B.C., Canada pp. 351-356..

Sutcliffe, MPF (2007) Effect of roughness in cold metal rolling. In: 3rd International Conference on Tribology in Manufacturing Processes, ICTMP 2007, 24-9-2007 to 26-9-2007, Yokohama, Japan.

Sutcliffe, MPF and Fox, MN and Daley, JAB (2007) Modelling of transfer film formation in rolling using plasticine. In: 3rd International Conference on Tribology in Manufacturing Processes, ICTMP 2007, 24-9-2007 to 26-9-2007, Yokohama, Japan.

Tagarielli, VL and Deshpande, VS and Fleck, NA (2007) The dynamic response of composite sandwich beams to transverse impact. International Journal of Solids and Structures, 44. pp. 2442-2457. ISSN 0020-7683

Tagarielli, VL and Deshpande, VS and Fleck, NA (2007) The high strain rate response of PVC foams and end-grain balsa wood. Composites B: Engineering. ISSN 1359-8368

Tilbrook, MT and Radford, DD and Deshpande, VS and Fleck, NA (2007) Dynamic crushing of sandwich panels with prismatic lattice cores. International Journal of Solids and Structures, 44. pp. 6101-6123. ISSN 0020-7683

Vanderbemden, P and Hong, Z and Coombs, TA and Ausloos, M and Hari Babu, N and Cardwell, DA (2007) Remagnetization of bulk high-temperature superconductors subjected to crossed and rotating magnetic fields. Superconductor Science and Technology, 20. S174-S183. ISSN 0953-2048

Vanderbemden, P and Hong, Z and Coombs, TA and Denis, S and Ausloos, M and Schwartz, J and Rutel, IB and Hari Babu, N and Cardwell, DA and Campbell, AM (2007) Behaviour of bulk high-temperature superconductors of finite thickness subjected to crossed magnetic fields: experiment and model. Physics Review B: Condensed Matter and Materials Physics, 75. 174515-. ISSN 1550-235X

Vaziri, A and Gopinath, A and Deshpande, VS (2007) Continuum-based computational models for cell and nuclear mechanics. Journal of the Mechanics of Materials and Structures, 2. pp. 1169-1192.

Wei, Z and Deshpande, VS and Evans, AG and Dharmasena, KP and Wadley, HNG and Dudt, P and Kiddy, K (2007) The resistance of metallic sandwich panels to localized underwater blast. Journal of the Mechanics and Physics of Solids. ISSN 0022-5096

Wei, ZS and Deshpande, VS and McMeeking, RM and Evans, AG (2007) Modeling of stress fiber organization in cyclically stretched cells. In: UNSPECIFIED pp. 273-274..

Widjaja, A and Van der Giessen, E and Deshpande, VS and Needleman, A (2007) Contact area and size effects in discrete dislocation modeling of wedge indentation. Journal of Materials Research, 22. pp. 655-663. ISSN 0884-2914

Williams, JA and Davies, SG and Frazer, S (2007) The peeling of flexible probabilistic fasteners. Tribology Letters, 26. pp. 213-222. ISSN 1023-8883

Williams, JA and Kauzlarich, JJ (2007) Application of the bulk properties of an acrylic pressure-sensitive adhesive to peeling. J ADHES SCI TECHNOL, 21. pp. 515-529. ISSN 0169-4243

Yan, J and Seshia, AA (2007) Thermoelastic dissipation in MEMS/NEMS flexural vibration resonators. In: International Conference on Nanoscience and Technology (ChinaNANO2007), 4-6-2007 to 6-6-2007, Beijing, China.

Yan, J and Seshia, AA and Le Phan, K and Steeneken, PG and van Beek, JTM (2007) Narrow bandwidth single-resonator MEMS turning fork filter. In: 2007 Joint with the 21st European Frequency and Time Forum, IEEE Frequency Control Symposium, 29-5-2007 to 1-6-2007, Geneva, Switzerland pp. 1366-1369..

Yan, J and Seshia, AA and Phan, KL and Steeneken, PG and van Beek, JTM (2007) Narrow bandwidth single-resonator MEMS tuning fork filter. In: IEEE International Frequency Control Symposium (IEEE-FCS 2007), 29-5-2007 to 1-6-2007, Geneva, Switzerland pp. 1366-1369..

Ye, L and Majoros, M and Campbell, AM and Coombs, TA and Harrison, S and Sargent, P and Haslett, M and Husband, M (2007) MgB2 sample tests for possible applications of superconducting fault current limiters. IEEE Transactions on Applied Superconductivity, 17. pp. 2826-2829. ISSN 1051-8223

Ye, L and Majoros, T and Coombs, TA and Campbell, AM (2007) System studies of the superconducting fault current limiter in electrical distribution grids. IEEE Transactions on Applied Superconductivity (ASC), 17. pp. 2339-2342. ISSN 1051-8223

Yungwirth, CJ and Wadley, HNG and Zakraysek, A and Deshpande, VS (2007) Impact response of sandwich plates with a pyramidal lattice core. International Journal of Impact Engineering. ISSN 0734-743X

Zhu, H and Chu, DP and Fleck, NA and Pane, I and Huber, JE and Natori, E (2007) Polarization change of PZTN ferroelectric thin films under uniform in-plane tensile stress. Integrated Ferroelectrics, 95. pp. 117-127. ISSN 1058-4587

Zhu, H and Chu, DP and Fleck, NA and Pane, I and Natori, E (2007) Polarization change of PZTN ferroelectric thin film capacitors under tensile stress. In: 19th International Symposium on Integrated Ferroelectrics (ISIF), -5-2007 to --, Bordeaux, France.

Zhu, H and Chu, DP and Fleck, NA and Pane, I and Natori, E (2007) Polarization change of PZTN ferroelectric thin film capacitors under tensile stress.

Zhu, Y and Lee, JEY and Seshia, AA (2007) MEMS electrometer system-level simulation using a time-domain variable capacitor model. In: 14th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers), 10-6-2007 to 14-6-2007, Lyon, France.

Zhu, Y and Lee, JEY and Seshia, AA (2007) System-level simulation of a micromachined electrometer using a time-domain variable capacitor circuit model. Journal of Micromechanics and Microengineering, 17. pp. 1059-1065. ISSN 0960-1317

Zisis, A and Fleck, NA (2007) Mechanisms of elastodynamic erosion of electron-beam thermal barrier coatings. INT J MATER RES, 98. pp. 1196-1202. ISSN 1862-5282

Zumpano, G and Sutcliffe, MPF and Stronge, WJ (2007) Impact damage to textile composites. In: DFC9: Deformation and Fracture of Composites, 11-4-2007 to 13-4-2007, Sheffield, UK.

2006

Akisanya, AR and Fleck, NA (2006) Plastic collapse of thin-walled frusta and egg-box material under shear loading and normal loading. International Journal of Mechanical Sciences, 48. pp. 799-808. ISSN 0020-7403

Atanasov, IS and Durrell, JH and Vulkova, LA and Barber, ZH and Yordanov, OI (2006) Statistical characterization of surface morphologies. PHYSICA A, 371. pp. 361-367. ISSN 0378-4371

Babu, NH and Iida, K and Cardwell, DA (2006) Enhanced magnetic flux pinning in nano-composite Y-Ba-Cu-O superconductors. In: UNSPECIFIED pp. 353-356..

Balint, DS and Deshpande, VS and Needleman, A and van der Giessen, E (2006) Discrete dislocation plasticity analysis of the wedge indentation of films. Journal of the Mechanics and Physics of Solids, 54. pp. 2281-2303. ISSN 0022-5096

Balint, DS and Deshpande, VS and Needleman, A and van der Giessen, E (2006) Size effects in uniaxial deformation of single and polycrystals: a discrete dislocation plasticity analysis. Modelling and Simulation in Materials Science and Engineering, 14. pp. 409-422. ISSN 0965-0393

Beaumont, PWR (2006) Cracking models: broken parts. Applied Composite Materials, 13. pp. 265-285. ISSN 0929-189X

Beaumont, PWR (2006) Cracking models; broken parts. Applied Composite Materials, 13. pp. 265-285. ISSN 0929-189X

Beaumont, PWR (2006) Pushing the performance limit of composite structures. Part 1: Modelling. Reinforced Plastics, 50. pp. 58-63. ISSN 0034-3617

Beaumont, PWR (2006) Pushing the performance limit of composite structures. Part 2: Cracking models. Reinforced Plastics, 50. pp. 30-36. ISSN 0034-3617

Beaumont, PWR and Dimant, RA and Shercliff, HR (2006) Failure processes in composite materials: getting physical. Journal of Materials Science, 41. pp. 6526-6546. ISSN 0022-2461

Bembey, AK and Bushby, AJ and Boyde, A and Ferguson, VL and Oyen, ML (2006) Hydration effects on the micro-mechanical properties of bone. Journal of Materials Research, 21. pp. 1962-1968. ISSN 0884-2914

Bembey, AK and Oyen, ML and Bushby, AJ and Boyde, A (2006) Viscoelastic properties of bone as a function of hydration state determined by nanoindentation. Philosophical Magazine, 86. pp. 5691-5703. ISSN 1478-6443

Bembey, AK and Oyen, ML and Ferguson, VL and Bushby, AJ and Boyde, A (2006) Effect of water on mechanical properties of mineralized tissue composites. Materials Research Society Symposium Proceedings, 975. pp. 147-152. ISSN 0272-9172

Bolognini, F and Shea, K and Vale, CW and Seshia, AA (2006) A multicriteria system-based method for simulation-driven design synthesis. In: 32nd Design Automation Conference: 2006 ASME International Design Engineering Technical Conferences (IDETC/CIE2006), 10-9-2006 to 13-9-2006, Philadelphia, PA, USA pp. 651-662..

Borg, U and Niordson, CF and Fleck, NA and Tvergaard, V (2006) A viscoplastic strain gradient analysis of materials with voids or inclusions. International Journal of Solids and Structures, 43. pp. 4906-4916. ISSN 0020-7683

C?t?, F and Deshpande, VS and Fleck, NA and Evans, AG (2006) The compressive and shear responses of corrugated and diamond lattice materials. International Journal of Solids and Structures, 43. pp. 6220-6242. ISSN 0020-7683

Cardwell, DA (2006) Review of engineering materials I and II. The Times Higher Education Supplement Textbook Guide.

Cardwell, DA and Hari Babu, N (2006) Processing and properties of single grain (RE)-Ba-Cu-O bulk superconductors. Physica C: Superconductivity, 445-44. pp. 1-7. ISSN 0921-4534

Cardwell, DA and Hari Babu, N and Iida, K (2006) Enhanced magnetic flux pinning in nano-composite (RE)Ba-Cu-O bulk superconductors. Nanopages, 1. pp. 165-183. ISSN 1787-4033

Cardwell, DA and Hari Babu, N and Shi, YH and Iida, K (2006) A practical processing method for the fabrication of high performance, single grain (LRE)-Ba–Cu–O superconductors. Superconductor Science and Technology, 19. S510-S516.

Cardwell, DA and Hari Babu, N and Shi, YH and Iida, K (2006) Single grain (LRE)-Ba-Cu-O superconductors fabricated top seeded melt growth in air. Journal of Physics: Conference Series, 43. pp. 421-424. ISSN 1742-6588

Cebon, D and Ashby, MF (2006) Engineering materials informatics. MRS Bulletin, 31. pp. 1004-1012. ISSN 0883-7694

Clyne, TW and Golosnoy, IO and Tan, JC and Markaki, AE (2006) Porous materials for thermal management under extreme conditions. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 364. pp. 125-146. ISSN 1364-503X

Colegrove, PA and Shercliff, HR (2006) CFD modelling of friction stir welding of thick plate 7449 aluminium alloy. Science and Technology of Welding and Joining, 11. pp. 429-441. ISSN 1362-1718

Cote, F and Deshpande, VS and Fleck, NA (2006) The shear response of metallic square honeycombs. Journal of Mechanics and Materials Structures, 1. pp. 1281-1299. ISSN 1559-3959

Cruickshank, HJ and Bertenyi, T and Cardwell, D and Jackson, S and Wan, T (2006) Sustainable development for engineers: developing resources to deliver transferable skills. In: The International Conference on Innovation, Good Practice and Research in Engineering Education, 24-7-2006 to 26-7-2006, Liverpool, England pp. 148-154..

Cruickshank, HJ and Bertenyi, T and Cardwell, DA and Jackson, S (2006) Sustainable development for engineers: developing resources to deliver transferable skills. In: 1st CDIO International Conference, 6-6-2006 to 9-6-2006, Kingston, Canada.

Csanyi, G and Pickard, CJ and Simons, BD and Needs, RJ (2006) Graphite intercalation compounds under pressure.

Côté, F and Deshpande, VS and Fleck, NA and Evans, AG (2006) The compressive and shear responses of corrugated and diamond lattice materials. International Journal of Solids and Structures, 43. pp. 6220-6242. ISSN 0020-7683

Deshpande, VS and Heaver, A and Fleck, NA (2006) An underwater shock simulator. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 462. pp. 1021-1041. ISSN 1364-5021

Deshpande, VS and McMeeking, RM and Evans, AG (2006) Erratum: A bio-chemo-mechanical model for cell contractility (Proceedings of the National Academy of Sciences of the United States of America (September 19, 2006) 38, 103 (14015-14020) DOI:_10.1073/pnas.0605837103). Proceedings of the National Academy of Sciences of the United States of America, 103. p. 17065. ISSN 0027-8424

Deshpande, VS and McMeeking, RM and Evans, AG (2006) A bio-chemo-mechanical model for cell contractility. Proceedings of the National Academy of Sciences USA, 103. pp. 14015-14020. ISSN 0027-8424

Deshpande, VS and McMeeking, RM and Evans, AG (2006) A bio-chemo-mechanical model for cell contractility. P NATL ACAD SCI USA, 103. pp. 14015-14020. ISSN 0027-8424

Domenzain, W and Seshia, AA (2006) Rapid prototyping of PDMS based microfluid systems. In: 17th Conference on Micromechanics and Microengineering Europe, 3-9-2006 to 5-9-2006, Southampton, UK.

Durrell, JH and Pardo, E and Evetts, JE and Blamire, MG (2006) Vortex cutting in YBa 2Cu 3O 7-δ. In: 7th European Conference on Applied Superconductivity (EUCAS'05), 11-9-2005 to 15-9-2005, Vienna, Austria pp. 627-630..

Engelen, RAB and Fleck, NA and Peerlings, RHJ and Geers, MGD (2006) An evaluation of higher-order plasticity theories for predicting size effects and localisation. International Journal of Solids and Structures, 43. pp. 1857-1877. ISSN 0020-7683

Evans, AG and Fleck, NA and Faulhaber, S and Vermaak, N and Maloney, M and Darolia, R (2006) Scaling laws governing the erosion and impact resistance of thermal barrier coatings. Wear, 260. pp. 886-894.

Granados, X and Bartolomé, E and Obradors, X and Tornes, M and Rodrigues, L and Gawalek, W and McCulloch, M and Hughes, D and Campbell, AM and Coombs, TA and Ausloos, M and Cloots, R (2006) Iron-YBCO heterostructures and their application for trapped field superconducting motor. Journal of Physics: Conference Series, 43. pp. 788-791. ISSN 1742-6588

H R, L and M P F, S (2006) A multi-scale model for friction in cold rolling of aluminium alloy. Tribology Letters, 22. pp. 95-104.

Haindl, S and Weber, HW and Sefcikova, M and Zmorayova, K and Diko, P and Hari Babu, N and Cardwell, DA and Shlyk, L and Krabbes, G (2006) Studies of cracking behaviour in melt processed YBCO bulk superconductors. Journal of Physics: Conference Series, 43. pp. 429-433. ISSN 1742-6588

Hari Babu, N and Iida, K and Cardwell, DA (2006) High performance single grain Y-Ba-Cu-O bulk superconductor enhanced magnetic flux pinning in nano-composite Y-Ba-Cu-O bulk superconductors. Physica C: Superconductivity. ISSN 0921-4534

Hari Babu, N and Iida, K and Shi, YH and Cardwell, DA (2006) Processing of high performance (LRE)-Ba-Cu-O large, single grain bulk superconductors in air. Physica C: Superconductivity, 445-44. pp. 286-290. ISSN 0921-4534

Hari Babu, N and Iida, K and Shi, YH and Withnell, TD and Cardwell, DA (2006) YBa2Cu3O7-δ/Y2Ba4CuMOy single grain nanocomposite superconductors with high critical current densities. Superconductor Science and Technology, 19. S461-S465. ISSN 0953-2048

Hari Babu, N and Liu, C and Iida, K and Cardwell, DA (2006) Nano-composite, large, single grain YBa2Cu3O7-δ/Y2Ba4CuBiOy bulk superconductors. Journal of Physics: Conference Series, 43. pp. 377-380.

Hong, Z and Campbell, AM and Coombs, TA (2006) Numerical solution of critical state in superconductivity by finite element software. Superconductor Science and Technology, 19. pp. 1246-1252. ISSN 0953-2048

Hutchinson, RG and Fleck, NA (2006) The structural performance of the periodic truss. Journal of the Mechanics and Physics of Solids, 54. pp. 756-782.

Hutchinson, RG and Fleck, NA and Cocks, ACF (2006) A sintering model for thermal barrier coatings. Acta Materialia, 54. pp. 1297-1306. ISSN 1359-6454

Iida, K and Hari Babu, N and Shi, YH and Cardwell, DA (2006) Seeded infiltration and growth of single-domain Gd-Ba-Cu-O based superconductors using a generic seed crystal. Superconductor Science and Technology, 19. S478-S485. ISSN 0953-2048

Iida, K and Hari Babu, N and Shi, YH and Cardwell, DA and Murakami, M (2006) Gd-Ba-Cu-O bulk superconductors fabricated by a seeded infiltration and growth technique under reduced oxygen partial pressure. Superconductor Science and Technology, 19. S641-S647. ISSN 0953-2048

Iida, K and Hari Babu, N and Withnell, TD and Shi, YH and Haindl, S and Weber, HW and Cardwell, DA (2006) High performance single grain Y-Ba-Cu-O bulk superconductor fabricated by seeded infiltration and growth. Physica C: Superconductivity, 445-44. pp. 277-281. ISSN 0921-4534

J A, W and H R, L (2006) Tribology and MEMS. Journal of Physics D, 39. R201-R214.

Jiang, Q and Majoras, M and Hong, Z and Campbell, AM and Coombs, TA (2006) Design and AC loss analysis of a superconducting synchronous motor. Superconductor Science and Technology, 19. pp. 1164-1168. ISSN 0953-2048

Ko, CC and Oyen, ML and Fallgatter, AM and Kim, JH and Douglas, WH and Fricton, J and Hu, WS (2006) Mechanical properties and cytocompatibility of biomimetic hydroxyapatite-gelatin nano-composites. Journal of Materials Research, 21. pp. 3090-3098. ISSN 0884-2914

Koblischka, MR and Winter, M and Hartmann, U and Koblischka Veneva, A and Hari Babu, N and Cardwell, DA (2006) Analysis of melt-textured YBCO with nanoscale inclusions. Journal of Physics: Conference Series, 43. pp. 522-526. ISSN 1742-6588

Koblischka Veneva, A and Holzapfel, C and Mücklich, F and Koblischka, MR and Hari Babu, N and Cardwell, DA (2006) Investigation of grain orientations of melt-textured HTSC with addition of uranium oxide, Y2O3 and Y2BaCuO5. Journal of Physics: Conference Series, 43. pp. 527-530.

Koblischka Veneva, A and Koblischka, MR and Hari Babu, N and Cardwell, DA and Mücklich, F (2006) Embedded Y2Ba4CuNbOx nanoparticles in melt-textured YBCO studied by means of EBSD. Physica C: Superconductivity, 445-44. pp. 379-381. ISSN 0921-4534

Koblischka Veneva, A and Koblischka, MR and Hari Babu, N and Cardwell, DA and Shlyk, L and Krabbes, G (2006) An electron back scatter diffraction investigation of the crystallographic orientation of embedded nanoparticles within melt textured YBCO high temperature superconductors. Superconductor Science and Technology, 19. S562-S566. ISSN 0953-2048

Koblischka Veneva, A and Mücklich, F and Koblischka, MR and Hari Babu, N and Cardwell, DA and Murakami, M (2006) Grain orientations and distribution of Y2Ba4CuUOx phase in melt-textured YBCO with addition of depleted uranium oxide studied by EBSD. Superconductor Science and Technology, 19. S567-S571. ISSN 0953-2048

Koblischka-Veneva, A and Mücklich, F and Koblischka, MR and Hari Babu, N and Cardwell, DA (2006) EBSD characterisation of Y2Ba4CuUOx phase in melttextured YBCO with addition of depleted uranium oxide. Journal of Physics: Conference Series, 43. pp. 438-441. ISSN 1742-6588

Lee, JEY and Zhu, Y and Seshia, AA (2006) A variable capacitor based MEMS electrometer. In: 20th European Conference on Sensors, 17-9-2006 to 20-9-2006, Goteborg, Sweden pp. 452-453..

Lillikakis, A and Sutcliffe, MPF (2006) The effect of vancomycin on the compression strength of bone cement. In: 62nd Panhellenic Orthopaedic Congress, 3-10-2006 to 7-10-2006, Athens, Greece.

Long, ACA and Skordos, A and Sutcliffe, MPF (2006) Optimisation of forming in woven composites manufacturing using variable peripheral pressure. In: 27th International SAMPE Europe Conference, 27-3-2006 to 29-3-2006, Paris, France.

Luo, JK and Fu, Y-Q and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2006) Normally closed microgrippers based on diamond-like carbon structures. In: International symposium on Diamond and Other New Carbon Materials, -6-2006 to --, Acireale, Sicily pp. 133-141..

Luo, JK and Huang, R and He, JH and Fu, YQ and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2006) Modelling and fabrication of low operation temperature microcages with a polymer/metal/DLC trilayer structure. Sensors and Actuators A: Physical, 132. pp. 346-353. ISSN 0924-4247

Luo, JK and Lin, M and Fu, YQ and Wang, L and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2006) MEMS based digital variable capacitors with a high-k dielectric insulator. Sensors and Actuators A: Physical, 132. pp. 139-146.

Luo, JK and Pritschow, M and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2006) Effects of process conditions on properties of electroplated Ni thin films for microsystem applications. Journal of the Electrochemical Society, 153. D155-D161. ISSN 0013-4651

MacManus Driscoll, JL and Maiorov, B and Durrell, JH and Foltyn, S and Jia, QX and Civale, L and Wang, H and Kursumovic, A and Peterson, DE (2006) Guidelines for optimizing random and correlated pinning in rare-earth-based superconducting films. Superconductor Science and Technology, 19. S55-S59. ISSN 0953-2048

Mattice, JM and Lau, AG and Oyen, ML and Kent, RW (2006) Spherical indentation load-relaxation of soft biological tissues. Journal of Materials Research, 21. pp. 2003-2010. ISSN 0884-2914

McShane, GJ and Boutchich, M and Phani, AS and Moore, DF and Lu, TJ (2006) Young's modulus measurement of thin-film materials using micro-cantilevers. J MICROMECH MICROENG, 16. pp. 1926-1934. ISSN 0960-1317

Meslin, S and Iida, K and Hari Babu, N and Cardwell, DA and Noudem, J (2006) The effect of Y-211 precursor particle size on the microstructure and properties of Y-Ba-Cu-O bulk superconductors fabricated by seeded infiltration and growth. Superconductor Science and Technology, 19. pp. 711-718. ISSN 0953-2048

Moras, G and Csanyi, G and Payne, MC and De Vita, A (2006) A novel molecular dynamics approach to large semiconductor systems. Physica B: Condensed Matter, 376-37. pp. 936-939. ISSN 0921-4526

Moras, G and Csanyi, G and Payne, MC and De Vita, A (2006) A novel molecular dynamics approach to large semiconductor systems. In: UNSPECIFIED pp. 936-939..

Needleman, A and van der Giessen, E and Deshpande, VS (2006) Statistical aspects of discrete dislocation plasticity. Scripta Materialia, 54. pp. 729-733. ISSN 1359-6462

Olesiak, SE and Oyen, M and Sponheimer, M and Eberle, JJ and Ferguson, VL (2006) Ultrastructural mechanical and material characterization of fossilized bone. Materials Research Society Symposium Proceedings, 975. pp. 45-50. ISSN 0272-9172

Oyen, ML (2006) Analytical techniques for indentation of viscoelastic materials. Philosophical Magazine, 86. pp. 5625-5641. ISSN 1478-6443

Oyen, ML (2006) Analytical techniques for indentation of viscoelastic materials. Philosophical Magazine, 86. pp. 5625-5641. ISSN 1478-6435

Oyen, ML (2006) Nanoindentation hardness of mineralized tissues. Journal of Biomechanics, 39. pp. 2699-2702. ISSN 0021-9290

Oyen, ML and Bembey, AK and Bushby, AJ (2006) Poroelastic indentation analysis for hydrated biological tissues. Materials Research Society Symposium Proceedings, 975. pp. 122-127. ISSN 0272-9172

Oyen, ML and Bushby, AJ and Mann, A and Ortiz, C (2006) Mechanics of biological and biomimetic materials at small length-scales. Journal of Materials Research, 21. pp. 1869-1870. ISSN 0884-2914

Oyen, ML and Calvin, SE and Landers, DV (2006) Premature rupture of the fetal membranes: is the amnion the major determinant? American Journal of Obstetrics and Gynecology, 195. pp. 510-515. ISSN 0002-9378

Palau, A and Durrell, JH and MacManus-Driscoll, JL and Harrington, S and Puig, T and Sandiumenge, F and Obradors, X and Blamire, MG (2006) Crossover between channeling and pinning at twin boundaries in YBa2Cu3O7 thin films. PHYS REV LETT, 97. -. ISSN 0031-9007

Pedersen, CBW and Deshpande, VS and Fleck, NA (2006) Compressive response of the Y-shaped sandwich core. European Journal of Mechanics - A / Solids, 25. pp. 125-141. ISSN 0997-7538

Pedersen, CBW and Fleck, NA and Ananthasuresh, GK (2006) Design of a compliant mechanism to convert an actuator characteristic to a constant output force. Transactions of the ASME, Journal of Mechanical Design, 128. pp. 1101-1112. ISSN 1050-0472

Peel, M and Steuwer, A and Withers, PJ and Dickerson, TL and Shi, Q and Shercliff, HR (2006) Dissimilar friction stir welds in AA5083-AA6082: Part I - Process parameter effects on thermal history and weld properties. Metallurgical and Materials Transactions A, 37. pp. 2183-2193.

Phani, AS and Seshia, AA and Palaniapan, M and Howe, RT and Yasaitis, J (2006) Modal coupling in micromechanical vibratory rate gyroscopes. IEEE Sensors Journal, 6. pp. 1144-1152. ISSN 1530-437X

Phani, AS and Woodhouse, J and Fleck, NA (2006) Wave propagation in two-dimensional periodic lattices. Journal of the Acoustical Society of America, 119. pp. 1995-2005. ISSN 0001-4966

Preston, RV and Shercliff, HR and Withers, PJ and Hughes, D and Smith, SD and Webster, PJ (2006) Synchrotron X-ray measurement and finite element analysis and of residual strain in TIG welded aluminium alloy 2024. Metallurgical and Materials Transactions A, 37. pp. 3629-3637.

Quinn, DJ and Spearing, SM and Ashby, MF and Fleck, NA (2006) A systematic approach to process selection in MEMS. Journal of Microelectromechanical Systems, 15. pp. 1039-1050. ISSN 1057-7157

Radford, DD and Deshpande, VS and Fleck, NA (2006) The response of clamped sandwich beams subjected to shock loading. International Journal of Impact Engineering, 32. pp. 968-987. ISSN 0734-743X

Radford, DD and McShane, GJ and Deshpande, VS and Fleck, NA (2006) The response of clamped sandwich plates with metallic foam cores to simulated blast loading. International Journal of Solids and Structures, 43. pp. 2243-2259. ISSN 0020-7683

Ransley, JHT and Watari, M and Sukumaran, D and McKendry, R and Seshia, AA (2006) SU-8 bio-chemical sensor microarrays. Journal of Microelectronic Engineering, 83. pp. 1621-1625. ISSN 0167-9317

Ransley, JHT and Watari, M and Sukumaran, D and McKendry, RA and Seshia, AA (2006) SU8 bio-chemical sensor microarrays. Microelectronic Engineering, 83. pp. 1621-1625. ISSN 0167-9317

Rastogi, A and Campbell, AM and Coombs, TA (2006) Dynamics of superconductor bearings in a cryogenic failure. Physica C: Superconductivity and its Applications, 442. pp. 9-12. ISSN 0921-4534

Rastogi, A and Campbell, AM and Coombs, TA (2006) Failure analysis of superconducting bearings. Journal of Physics: Conference Series, 43. pp. 1003-1006. ISSN 1742-6588

Rathbun, HJ and Radford, DD and Xue, Z and He, MY and Yang, J and Deshpande, V and Fleck, NA and Hutchinson, JW and Zok, FW and Evans, AG (2006) Performance of metallic honeycomb-core sandwich beams under shock loading. INT J SOLIDS STRUCT, 43. pp. 1746-1763. ISSN 0020-7683

Rathbun, HJ and Radford, DD and Xue, Z and He, MY and Yang, J and Deshpande, VS and Fleck, NA and Hutchinson, JW and Zok, FW and Evans, AG (2006) Performance of metallic honeycomb-core sandwich beams under shock loading. International Journal of Solids and Structures, 43. pp. 1746-1763. ISSN 0020-7683

Richter, H and Puica, I and Lang, W and Peruzzi, M and Durrell, JH and Sturm, H and Pedarnig, JD and Bauerle, D (2006) Angle dependence of the Hall effect in HgBa2CaCu2O6 thin films. PHYS REV B, 73. -. ISSN 1098-0121

Richter, H and Puica, I and Lang, W and Peruzzi, M and Durrell, JH and Sturm, H and Pedarnig, JD and Bauerle, D (2006) Angle-dependence of the Hall effect in Hg-Ba-Ca-Cu-O thin films. In: UNSPECIFIED pp. 706-709..

Robson, JD and Kamp, N and Sullivan, A and Shercliff, HR (2006) Modelling precipitate evolution during friction stir welding of aerospace aluminum alloys. In: 10th International Conference on Aluminium Alloys: Research Through Innovation and Technology, 9-7-2006 to 13-7-2006, Vancouver, B.C., Canada pp. 1101-1106..

Sandeman, KG and Daou, R and Ozcan, S and Durrell, JH and Mathur, ND and Fray, DJ (2006) Negative magnetocaloric effect from highly sensitive metamagnetism in CoMnSi1-xGex. PHYS REV B, 74. -. ISSN 1098-0121

Sekine, H and Beaumont, PWR (2006) Micro-mechanical theory of macroscopic stress-corrosion cracking in unidirectional GFRP. Journal of Materials Science, 41. pp. 4604-4610. ISSN 0022-2461

Shergold, OA and Fleck, NA and King, T (2006) The penetration of a soft solid by a liquid jet, with application to the administration of a needle-free injection. Journal of Biomechanics, 39. pp. 2593-2602. ISSN 0021-9290

Shergold, OA and Fleck, NA and Radford, D (2006) The uniaxial stress versus strain response of pig skin and silicone rubber at low and high strain rates. International Journal of Impact Engineering, 32. pp. 1384-1402. ISSN 0734-743X

Shi, Y-H and Hari Babu, N and Iida, K and Cardwell, DA (2006) Properties of Mg-doped Nd-Ba-Cu-O generic seed crystals for the top seeded melt growth of (RE)-Ba-Cu-O bulk superconductors. Journal of Physics: Conference Series, 43. pp. 446-449. ISSN 1742-6588

Shi, YH and Hari Babu, N and Iida, K and Cardwell, DA (2006) Mg-doped Nd-Ba-Cu-O generic seed crystals for the top seeded melt growth of large grain (RE)-Ba-Cu-O bulk superconductors. Journal of Materials Research, 21. pp. 1355-1362. ISSN 0884-2914

Shi, YH and Hari Babu, N and Iida, K and Cardwell, DA (2006) The influence of Nd–Ba–Cu–Mg–O generic seed crystal composition on Tc of seeded, bulk (RE)–Ba–Cu–O grains. Physica C, 445-44. pp. 295-298.

Shieh, J and Huber, JE and Fleck, NA (2006) Fatigue crack growth in ferroelectrics under electrical loading. Journal of the European Ceramic Society, 26. pp. 95-109.

Shu, W and Seshia, AA (2006) Microcantilever sensors: a platform for the investigation of biotin-streptavidin binding interactions. In: 9th World Congress on Biosensors, 10-5-2006 to 12-5-2006, Toronto, Canada pp. 9-10..

Skordos, A and Sutcliffe, MPF (2006) Geometrical variability of woven textiles. In: 8th International Conference on Textile Composites (TEXCOMP), 16-10-2006 to 18-10-2006, Nottingham, UK.

Skordos, A and Sutcliffe, MPF (2006) Stochastic geometric properties of woven textiles. In: 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, -5-2006 to --, Newport, R.I, USA pp. 7163-7172..

Skordos, A and Sutcliffe, MPF and Klintworth, JW and Adolfsson, JP (2006) Multi-objective optimisation of woven composite draping using genetic algorithms. In: 27th International SAMPE Europe Conference, 28-3-2006 to 30-3-2006, Paris, France.

Steeves, CA and Fleck, NA (2006) In-plane properties of composite laminates with through-thickness pin reinforcement. International Journal of Solids and Structures, 43. pp. 3197-3212. ISSN 0020-7683

Sui, Z and Corke, H and Oyen, ML and Lucas, PW (2006) Fracture and energy partitioning in uncooked and cooked noodles. Materials Research Society Symposium Proceedings, 975. pp. 70-74. ISSN 0272-9172

Suiker, SJ and Fleck, NA (2006) Modelling of fatigue crack tunnelling and delamination in layered composites. Composites Part A: Applied Science and Manufacturing, 37. pp. 1722-1733. ISSN 1359-835X

Sutcliffe, MPF (2006) Micromechanics and compressive loading of composite materials. In: 27th Riso International Symposium on Materials Science; Polymer Composite Materials for Wind Power Turbines, -9-2006 to --, Roskilde, Denmark pp. 49-68..

Sutcliffe, MPF (2006) Micromechanics and compressive loading of composite materials. In: 27th Risoe International Symposium on Materials Science: Polymer Composite Materials for Wind Power Turbines, 4-9-2006 to 7-9-2006, Roskilde, Denmark pp. 49-68..

Sutcliffe, MPF and Liu, F (2006) Development of a process map for low-k materials. In: 16th CMP Users Meeting, Semicon Europa, 7-4-2006 to --, Munich, Germany.

Symons, DD and Fleck, NA (2006) The imperfection sensitivity of isotropic two-dimensional elastic lattices. Journal of the Mechanics and Physics of Solids. ISSN 0022-5096

Th, Z and N A, F (2006) Mechanisms of elastodynamic erosion of electron-beam thermal barrier coatings. International Journal of Fracture. ISSN 0376-9429

Tilbrook, MT and Deshpande, VS and Fleck, NA (2006) The impulsive response of sandwich beams: analytical and numerical investigation of regimes of behaviour. Journal of the Mechanics and Physics of Solids, 54. pp. 2242-2280.

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Miller, DB (2006) Experimental investigation of roughening of the matt surface in pack rolling. Journal of Materials Processing Technology, 177. pp. 501-504.

Vader, DA and Kabla, A and Stein, AM and Weitz, DA and Mahadevan, L and Sanders, L (2006) A Biologically-inspired Method to Measure Collagen Mechanical Properties. MOLECULAR BIOLOGY OF THE CELL, 17. ISSN 1059-1524

Wei, Z and Deshpande, VS and McMeeking, RM and Evans, AG (2006) Analysis and interpretation of stress fiber organization in cells subject to cyclic stretch. ASME Journal of Biomechanical Engineering. ISSN 0148-0731

Williams, JA and Kauzlarich, JJ (2006) Application of the bulk properties of an acylic pressure sensitive adhesive to peeling. Journal of Adhesion Science and Technology. ISSN 0169-4243

Williams, JA and Kauzlarich, JJ (2006) Energy and force distributions during mandrel peeling of a flexible tape with a pressure sensitive adhesive. Journal of Adhesion Science and Technology, 20. pp. 661-676. ISSN 0169-4243

Williams, SW and Colgrove, PA and Shercliff, HR and Prangnell, P and Robson, JD and Withers, P and Richards, D and Sullivan, A and Kamp, N and Lohwasser, D and Poad, M (2006) Integrated modelling of the friction stir welding process. In: Proceedings of the 6th International Symposium on Friction Stir Welding, 10-10-2006 to 12-10-2006, Montreal, Canada.

Withnell, TD and Hari Babu, N and Iida, K and Shi, YH and Cardwell, DA and Haindl, S and Hengstberger, F and Weber, HW (2006) The effect of seed orientation and separation on the field trapping properties of multi-seeded, melt processed Y-Ba-Cu-O. Physica C: Superconductivity, 445-44. pp. 382-386. ISSN 0921-4534

Yan, J and Seshia, AA and Steen, PG and van Beek, JTM (2006) A silicon MEMS bulk mode 'sandwich' resonator. In: 17th European Workshop on Micromachining, Micromechanics and Microsystems (MME 2006), 3-9-2006 to 5-9-2006, Southampton, UK.

Yan, J and Seshia, AA and Steeneken, PG and van Beek, JTM (2006) A test structure for Young's modulus extraction through capacitance-voltage measurements. In: CAMTEC Workshop, 11-4-2006 to --, Cambridge, UK.

Zhang, G and Campbell, AM and Rastogi, A and Coombs, TA and Dai, S (2006) Numerical simulation of magnetic fields in YBCO high temperature superconducting flywheel model. IEEE Transactions on Applied Superconductivity (ASC), 16. pp. 1578-1581. ISSN 1051-8223

2005

A, S and H R, L and M P F, S (2005) An efficient finite element model of surface pit reduction on stainless steel in metal forming processes. Journal of Materials Processing Technology, 170. pp. 310-316.

Ashby, MF (2005) Materials selection in mechanical design. Elsevier Butterworth-Heinemann.

Ashby, MF and Cebon, D (2005) Materials and design: creating the connections. In: A Symposium in Honour of Ken Wallace on Engineering Design: Theory and Practice, -4-2005 to --, Cambridge, UK pp. 8-21..

Ashby, MF and Cebon, D (2005) Materials selection for high temperature applications. In: Seminar on Life Predication of Structural Materials for Elevated Temperature Service (at MITS Meeting 2005), 17-3-2005 to --, Tokyo, Japan.

Ashby, MF and Shercliff, HR (2005) Cambridge Engineering Selector (CES) Edupack. Cambridge University Department of Engineering, Cambridge, UK.

Babu, NH and Reddy, ES and Shi, Y and Iida, K and Withnell, TD and Cardwell, DA (2005) Large single grain (RE)-Ba-Cu-O superconductors with nano-phase inclusions. IEEE Transactions on Applied Superconductivity, 15. pp. 3090-3093. ISSN 1051-8223

Balint, DS and Deshpande, VS and Needleman, A and Van Der Giessen, E (2005) Discrete dislocation plasticity analysis of crack-tip fields in polycrystalline materials. Philosophical Magazine, 85. pp. 3047-3071. ISSN 1478-6435

Balint, DS and Deshpande, VS and Needleman, A and Van Der Giessen, E (2005) Modeling fatigue crack growth in crystalline solids with discrete dislocation plasticity. 11th International Conference on Fracture 2005, ICF11, 4. pp. 2517-2521.

Balint, DS and Deshpande, VS and Needleman, A and van der Giessen, E (2005) Discrete dislocation plasticity analysis of crack-tip fields in polycrystalline materials. Philosophical Magazine, 85. pp. 3047-3071. ISSN 1478-6435

Balint, DS and Deshpande, VS and Needleman, A and van der Giessen, E (2005) A discrete dislocation plasticity analysis of grain-size strengthening. Materials Science and Engineering A, 400-40. pp. 186-190. ISSN 0921-5093

Beaumont, PWR (2005) Cracking models. In: Multi-scale Modelling of Composite Material Systems: The Art of Predictive Damage Modelling. CRC Press / Woodhead Publishing Limited, Chapter 3-.

Beaumont, PWR (2005) Predictive multi-scale modelling (physical modelling of composite material systems and components). In: 2nd Conference on Advances in Multi-scale Modelling of Composite Materials and Systems and Components, 25-9-2005 to 30-9-2005, Monterey, CA, USA.

Bell, DJ and Lu, TJ and Fleck, NA and Spearing, SM (2005) MEMS actuators and sensors: observations on their performance and selection for purpose. Jounal of Micromechanics and Microengineering, 15. S153-S164. ISSN 0960-1317

Bembey, AK and Oyen, ML and Bushby, AJ and Boyde, A (2005) Nanoindentation measurements of bone viscoelasticity as a function of hydration state. Materials Research Society Symposium Proceedings, 898. pp. 104-109. ISSN 0272-9172

Bembey, AK and Oyen, ML and Ko, CC and Bushby, AJ and Boyde, A (2005) Elastic modulus and mineral density of dentine and enamel in natural caries lesions. In: UNSPECIFIED pp. 125-130..

Cardwell, DA (2005) Crystal maze survey reveals the big picture. The Times Higher Education Supplement Textbook Guide, 2 Dece. p.6-. ISSN 0049-3929

Cardwell, DA and Murakami, M and Zeisberger, M and Gawalek, W and Gonzalez Arrabal, R and Eisterer, M and Weber, HW and Fuchs, G and Krabbes, G and Leenders, A and Freyhardt, HC and Hari Babu, N (2005) Round robin tests on large grain melt processed Sm-Ba-Cu-O bulk superconductors. Superconductor Science and Technology, 18. S173-S179. ISSN 0953-2048

Cebon, D and Ashby, MF (2005) Data systems for optimal material selection. In: International Symposium on Materials Databases (held at MITS Meeting 2005), 15-3-2005 to --, Tokyo, Japan.

Cebon, D and Ashby, MF (2005) Materials engineering. In: Information Sources in Engineering. Guides to Information Sources . KG Saur, pp. 482-526.

Clyne, TW and Markaki, AE and Tan, JC (2005) Mechanical and magnetic properties of metal fibre networks, with and without a polymeric matrix. Composites Science and Technology, 65. pp. 2492-2499. ISSN 0266-3538

Colegrove, PA and Shercliff, HR (2005) 3-dimensional CFD modelling of flow round a threaded friction stir welding tool profile. Journal of Materials Processing Technology, 169. pp. 320-327.

Csanyi, G (2005) Embedding and locality in quantum mechanics. In: CECAM Workshop: Real space methods, 20-6-2005 to 24-6-2005, Lyon, France.

Csanyi, G (2005) High dimensional interpolation: how to make a naive classical potential. In: Ab initio meets classical simulation, 17-10-2005 to 19-10-2005, Lyon, France.

Csanyi, G (2005) Towards a la carte accuracy in large scale computer simulations. In: Psi-k Conference, -9-2005 to --, Schwäbisch Gmünd, Germany.

Csanyi, G and Albaret, T and Moras, G and Payne, MC and De Vita, A (2005) Multiscale hybrid simulation methods for material systems. Journal of Physics: Condensed Matter, 17. R691-R703. ISSN 0953-8984

Csanyi, G and Albaret, T and Moras, G and Payne, MC and De Vita, A (2005) Multiscale hybrid simulation methods for material systems. J PHYS-CONDENS MAT, 17. R691-R703. ISSN 0953-8984

Csanyi, G and Littlewood, PB and Nevidomskyy, AH and Pickard, CJ and Simons, BD (2005) The role of the interlayer state in the electronic structure of superconducting graphite intercalated compounds. Nature Physics, 1. pp. 42-45. ISSN 1745-2473

Deshpande, VS and Fleck, NA (2005) One-dimensional response of sandwich plates to underwater shock loading. Journal of the Mechanics and Physics of Solids, 53. pp. 2347-2383. ISSN 0022-5096

Deshpande, VS and Needleman, A and Van Der Giessen, E (2005) Discrete dislocation plasticity analysis of size effects in single crystals. Computational Plasticity: Fundamentals and Applications - Proceedings of the 8th International Conference on Computational Plasticity, COMPLAS VIII. pp. 1181-1184.

Deshpande, VS and Needleman, A and van der Giessen, E (2005) Discrete dislocation plasticity analysis of single slip tension. Materials Science and Engineering A, 400-40. pp. 154-157. ISSN 0921-5093

Deshpande, VS and Needleman, A and van der Giessen, E (2005) Plasticity size effects in tension and compression of single crystals. Journal of the Mechanics and Physics of Solids, 53. pp. 2661-2691. ISSN 0022-5096

Deshpande, VS and Needleman, A and van der Giessen, E (2005) Reply to "Comment on dislocation dynamics is chaotic". Scripta Materialia, 52. pp. 429-431. ISSN 1359-6462

Deshpande, VS and Needleman, A and van der Giessen, E (2005) Size dependence of energy storage and dissipation in a discrete dislocation plasticity analysis of static friction. Materials Science and Engineering A, 400-40. pp. 393-396. ISSN 0921-5093

Durrell, JH and Hogg, MJ and Kahlmann, F and Barber, ZH and Blamire, MG and Evetts, JE (2005) Critical current of YBa2Cu3O7-delta low-angle grain boundaries (vol 90, pg 247006, 2003). PHYS REV LETT, 95. -. ISSN 0031-9007

Feih, S and Shercliff, HR (2005) Adhesive and composite failure prediction of single-L joint structures under tensile loading. International Journal of Adhesion and Adhesives, 25. pp. 47-59. ISSN 0143-7496

Feih, S and Shercliff, HR (2005) Composite failure prediction of single-L joint structures under bending. Composites Part A: Applied Science and Manufacturing, 36. pp. 381-395. ISSN 1359-835X

Feih, S and Shercliff, HR (2005) Quality assessment of curved composite components in peel joint structures. Composites A: Applied Science and Manufacturing, 36. pp. 397-408. ISSN 1359-835X

Ferguson, VL and Oyen, ML and Boyde, A and Bushby, AJ (2005) Mineralization and nanomechanical properties in Articular Calcified Cartilage (ACC). Proceedings of the 2005 Summer Bioengineering Conference, 2005. pp. 960-961.

Fleck, NA (2005) The resistance of metallic sandwich beams with lattice cores to under-water shock loading. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005), 16-2-2005 to 18-2-2005, Melbourne, Australia.

Fleck, NA and Deshpande, VS (2005) Closure to "Discussion of 'The resistance of clamped sandwich beams to shock loading' " (2005, ASME J. Appl. Mech., 72, pp. 978-979). J APPL MECH-T ASME, 72. p. 980. ISSN 0021-8936

Fleck, NA and Deshpande, VS (2005) Closure to discussion of the resistance of clamped sandwich beams to shock loading. Transactions of the ASME, Journal of Applied Mechanics, 72. pp. 978-979. ISSN 0021-8936

H R, L and M P, S and J A, W (2005) Friction and material transfer in micro-scale sliding contact between aluminium alloy and steel. Tribology Letters, 18. pp. 99-104. ISSN 1023-8883

H R, L and M P F, S and J A, W (2005) Friction and material transfer in micro-scale sliding contact between aluminium alloy and steel. Tribology Letters, 18. pp. 99-104.

H R, L and M P F, S and P Z, W and G T, B (2005) Surface generation and boundary lubrication in bulk forming of aluminium alloy. Wear, 258. pp. 1567-1576.

Haindl, S and Eisterer, M and Hörhager, N and Weber, HW and Walter, H and Shlyk, L and Krabbes, G and Hari Babu, N and Cardwell, DA (2005) Novel methods to characterize bulk RE-BCO superconductors. Physica C, 426-43. pp. 625-631. ISSN 0921-4534

Haindl, S and Eisterer, M and Weber, HW and Babu, NH and Cardwell, DA (2005) Grain boundaries in multi-seeded melt-grown superconductors. IEEE Transactions on Applied Superconductivity, 15. pp. 3129-3132. ISSN 1051-8223

Haindl, S and Eisterer, M and Weber, HW and Hari Babu, N and Cardwell, DA (2005) Grain boundaries in multi-seeded melt grown superconductors. IEEE Transactions on Applied Superconductivity, 15. pp. 3129-3132. ISSN 1051-8223

Hari Babu, N and Iida, K and Shi, YH and Withnell, TD and Cardwell, DA (2005) Fabrication of high performance (LRE)-Ba-Cu-O single-grain superconductors in air. Applied Physics Letters, 87. pp. 202506-202509. ISSN 0003-6951

Hari Babu, N and Kambara, M and Reddy, ES and Shi, Y and Cardwell, DA (2005) Improved magnetic flux pinning in melt processed (Y,Nd)Ba2Cu3O7−δ superconductor. Superconductor Science and Technology, 18. S38-S42. ISSN 0953-2048

Hari Babu, N and Reddy, ES and Shi, Y and Iida, K and Withnell, TD and Cardwell, DA (2005) Large single grain (RE)-Ba-Cu-O superconductors with nano phase inclusions. IEEE Transactions on Applied Superconductivity, 15. pp. 3090-3093.

Hari Babu, N and Shi, YH and Iida, K and Cardwell, DA (2005) A practical route for the fabrication of large single-crystal (RE)–Ba–Cu–O superconductors. Nature Materials, 4. pp. 476-480. ISSN 1476-1122

Hari Babu, N and Shi, YH and Iida, K and Cardwell, DA and Haindl, S and Eisterer, M and Weber, HW (2005) Processing of large, single grain YBa2Cu3O7−δ/Y2BaCuO5/Y2Ba4CuNbOy bulk composites. Physica C, 426-43. pp. 520-526. ISSN 0921-4534

Hofmann, S and Csanyi, G and Ferrari, AC and Payne, MC and Robertson, J (2005) Surface diffusion: the low activation energy path for nanotube growth. Physical Review Letters, 95. 036101-. ISSN 1079-7114

Hutchinson, RG and Fleck, NA (2005) Microarchitectured cellular solids - the hunt for statically determinate periodic trusses - Plenary lecture presented at the 75th Annual GAMM Conference, Dresden, Germany, 22-26 March 2004. ZAMM-Z ANGEW MATH ME, 85. pp. 607-617. ISSN 0044-2267

Hutchinson, RG and Fleck, NA (2005) Microarchitectured cellular solids – the hunt for statically determinate periodic trusses. Zeitschrift fur Angewandte Mathematik und Mechanik, 85. pp. 607-617.

Iida, K and Hari Babu, N and Cardwell, DA (2005) Seeded infiltration and growth of large, single domain Y-Ba-Cu-O bulk superconductors with very high critical current densities. Superconductor Science and Technology, 18. pp. 1421-1427. ISSN 0953-2048

Iida, K and Hari Babu, N and Reddy, ES and Shi, YH and Cardwell, DA (2005) The effect of nano-size ZrO2 powder addition on the microstructure and superconducting properties of single-domain Y–Ba–Cu–O bulk superconductors. Superconductor Science and Technology, 18. pp. 249-254. ISSN 0953-2048

Iida, K and Hari Babu, N and Shi, YH and Cardwell, DA (2005) The effect of the addition of zirconium-containing compounds on the microstructure and superconducting properties of mono-domain Y-Ba-Cu-O bulk superconductors. Superconductor Science and Technology, 18. pp. 704-709. ISSN 0953-2048

Ko, C-C and Oyen, M and Fallgatter, AM and Hu, W-S (2005) Effects of gelatin on mechanical properties of hydroxyapatite-gelatin nano-composltes. Materials Research Society Symposium Proceedings, 898. pp. 110-115. ISSN 0272-9172

Koblischka Veneva, A and Koblischka, MR and Hari Babu, N and Cardwell, DA and Murakami, M (2005) Comparative study of grain orientation in melt-textured HTSC with different additions. Physica C, 426-43. pp. 618-624. ISSN 0921-4534

Koblischka Veneva, A and Koblischka, MR and Hari Babu, N and Cardwell, DA and Mücklich, F and Murakami, M (2005) Orientation of embedded Y2BaCuO5 particles within the YBa2Cu3Ox matrix in melt-textured YBCO superconductors. Physica Status Solidi. C: Current Topics in Solid State Physics, 2. pp. 1714-1719. ISSN 1862-6351

Le, HR and Sutcliffe, MPF and Wang, P and Burstein, GT (2005) Surface generation and boundary lubrication in bulk forming of aluminium alloy. WEAR, 258. pp. 1567-1576. ISSN 0043-1648

Lukic, B and Seo, JW and Couteau, E and Lee, K and Gradecak, S and Berkecz, R and Hernadi, K and Delpeux, S and Cacciaguerra, T and Beguin, F and Fonseca, A and Nagy, JB and Csanyi, G and Kis, A and Kulik, AJ and Forro, L (2005) Elastic modulus of multi-walled carbon nanotubes produced by catalytic chemical vapour deposition. Applied Physics A: Materials Science and Processing, 80. pp. 695-700. ISSN 0947-8396

Luo, J and He, JH and Flewitt, A and Moore, DF and Spearing, SM and Fleck, NA and Milne, WI (2005) Development of all metal electrothermal actuator and its applications. Journal of Microlithography, Microfabrication and Microsystems, 4. pp. 1-9. ISSN 1537-1646

Luo, JK and Chu, DP and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2005) Uniformity control of Ni thin-film microstructures deposited by through-mask plating. Journal of the Electrochemical Society, 152. C36-C41. ISSN 0013-4651

Luo, JK and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2005) Comparison of microtweezers based on three lateral thermal actuator configurations. Journal of Micromechanics and Microengineering, 15. pp. 1294-1302. ISSN 0960-1317

Luo, JK and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2005) Three types of planar structure microspring electro-thermal actuators with insulating beam constraints. Journal of Micromechanics and Microengineering, 15. pp. 1527-1535. ISSN 0960-1317

Luo, JK and Fu, YQ and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2005) Large displacement spring-like electro-mechanical thermal actuators with insulator constraint beams. In: UNSPECIFIED pp. 67-77..

Luo, JK and He, JH and Flewitt, AJ and Moore, D and Spearing, SM and Fleck, NA and Milne, WI (2005) Development of all metal electro-thermal actuator and its applications. Journal of Microlithography, Microfabrication, and Microsystems (JM3), 04. 023012-. ISSN 1537-1646

Luo, JK and He, JH and Fu, YQ and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2005) Fabrication and characterization of diamond-like carbon/Ni bimorph normally closed microcages. Journal of Micromechanics and Microengineering, 15. pp. 1406-1413.

Maine, E and Probert, D and Ashby, M (2005) Investing in new materials: a tool for technology managers. Technovation, 25. pp. 15-23. ISSN 0166-4972

Markaki, AE and Clyne, TW (2005) Magneto-mechanical bone growth stimulation. In: The SPIE the International Society for Optical Engineering, 27-2-2005 to --, San Jose, CA, USA pp. 61-67..

Markaki, AE and Clyne, TW (2005) Magneto-mechanical stimulation of bone growth. In: Encyclopedia of Materials Science and Technology - Updates. Elsevier, Oxford, pp. 1-6.

Markaki, AE and Clyne, TW (2005) Magneto-mechanical actuation of bonded ferromagnetic fibre arrays. ACTA MATER, 53. pp. 877-889. ISSN 1359-6454

Markaki, AE and Colombo, P and Clyne, TW (2005) Highly porous cellular metals and ceramics. In: Encyclopedia of Condensed Matter Physics. Elsevier, Oxford, pp. 318-332. ISBN 0122276108

McShane, GJ and Deshpande, VS and Fleck, NA (2005) An assessment of the blast resistance of sandwich beams. Computational Plasticity: Fundamentals and Applications - Proceedings of the 8th International Conference on Computational Plasticity, COMPLAS VIII. pp. 1138-1141.

McShane, GJ and Radford, DD and Deshpande, VS and Fleck, NA (2005) The response of clamped sandwich plates with lattice cores subjected to shock loading. European Journal of Mechanics - A / Solids, 25. pp. 215-229. ISSN 0997-7538

Milne, WI and Luo, JK and Huang, R and He, JH and Fu, YQ and Flewitt, AJ and Spearing, SM and Fleck, NA (2005) Normally closed microgrippers based on diamond-like carbon/Ni bimorph and diamond-like carbon/metal/polymer trimorph structures. In: UNSPECIFIED pp. 1981-1984..

Murakami, M and Cardwell, DA and Salama, K and Krabbes, G and Habisreuther, T and Gawalek, W (2005) PASREG 2003: International workshop on processing and applications of superconducting (RE)BCO large grain materials. Superconductor Science and Technology, 18. S1-S218. ISSN 0953-2048

Ossa, EA and Deshpande, VS and Cebon, D (2005) Phenomenological model for monotonic and cyclic behavior of pure bitumen. J MATER CIVIL ENG, 17. pp. 188-197. ISSN 0899-1561

Ossa, EA and Deshpande, VS and Cebon, D (2005) Phenomenological model for the monotonic and cyclic behavior of pure bitumen. ASCE Journal of Materials in Civil Engineering, 17. pp. 188-197. ISSN 0899-1561

Ossa, EA and Deshpande, VS and Cebon, D (2005) Spherical indentation behaviour of bitumen. Acta Materialia, 53. pp. 3103-3113. ISSN 1359-6454

Oyen, ML (2005) Spherical indentation creep following ramp loading. Journal of Materials Research, 20. pp. 2094-2100. ISSN 0884-2914

Oyen, ML (2005) Spherical indentation creep following ramp loading. In: UNSPECIFIED pp. 211-216..

Oyen, ML (2005) A model for nonlinear viscoelastic mechanical responses of collagenous soft tissues. Materials Research Society Symposium Proceedings, 898. pp. 66-71. ISSN 0272-9172

Oyen, ML and Cook, RF and Stylianopoulos, T and Barocas, VH and Calvin, SE and Landers, DL (2005) Uniaxial and biaxial mechanical behavior of human amnion. Journal of Materials Research, 20. pp. 2902-2909. ISSN 0884-2914

Oyen, ML and Ko, CC (2005) Finite element modeling of bone ultrastructure as a two-phase composite. In: UNSPECIFIED pp. 263-268..

Oyen, ML and Ko, CC and Bembey, AK and Bushby, AJ and Boyde, A (2005) Nanoindentation and finite element analysis of resin-embedded bone samples as a three-phase composite material. In: UNSPECIFIED pp. 85-90..

Oyen, ML and Stylianopoulos, T and Barocas, VH and Calvin, SE and Cook, RF (2005) Uniaxial and biaxial mechanical behavior of human amnion. In: UNSPECIFIED pp. 161-166..

Oyen, MLL and Stylianopoulos, T and Calvin, SE and Landers, DV and Barocas, VH (2005) In vitro prefailure mechanics of placental membranes. Proceedings of the 2005 Summer Bioengineering Conference, 2005. pp. 926-927.

P Z, W and G T, B and H R, L and M P F, S (2005) The electrode potential of freshly generated aluminium surfaces in lubricating oil. Tribology Letters, 18. pp. 487-491.

Pandit, H and Shi, D and Hari Babu, N and Chaud, X and Cardwell, DA and He, P and Isfort, D and Tournier, R and Mast, D and Ferendeci, AM (2005) High Tc superconductor re-entrant cavity filter structures. Physica C, 425. pp. 44-51. ISSN 0921-4534

Pang, BSH and Bell, C and Tomov, RI and Durrell, JH and Blamire, MG (2005) Pseudo spin-valve behavior in oxide ferromagnet/superconductor/ferromagnet trilayers. PHYS LETT A, 341. pp. 313-319. ISSN 0375-9601

Payne, M and Csanyi, G and Albaret, T and De Vita, A (2005) A novel quantum/classical hybrid simulation technique. ChemPhysChem: a European journal of chemical physics and physical chemistry, 6. pp. 1731-1734. ISSN 1439-4235

Payne, MC and Csanyi, G and Albaret, T and De Vita, A (2005) A novel quantum/classical hybrid simulation technique. CHEMPHYSCHEM, 6. pp. 1731-1734. ISSN 1439-4235

Payne, MC and Csanyi, G and De Vita, A (2005) Hybrid atomistic modelling of materials processes. In: Handbook of Materials Modeling. Springer.

Peerlings, RHJ and Fleck, NA (2005) Computational evaluation of strain gradient constants. International Journal for Multiscale Computational Engineering, 2. pp. 599-619. ISSN 1543-1649

Qiu, X and Deshpande, VS and Fleck, NA (2005) Impulsive loading of clamped monolithic and sandwich beams over a central patch. Journal of the Mechanics and Physics of Solids, 53. pp. 1015-1046. ISSN 0022-5096

Radford, DD and Deshpande, VS and Fleck, NA (2005) The use of metal foam projectiles simulate shock loading on a structure. International Journal of Impact Engineering, 31. pp. 1152-1171. ISSN 0734-743X

Radford, DD and Deshpande, VS and Fleck, NA (2005) The use of metal foam projectiles to simulate shock loading on a structure. International Journal of Impact Engineering, 31. pp. 1152-1171. ISSN 0734-743X

Rastogi, A and Coombs, TA and Campbell, AM and Hall, R (2005) Axial stiffness of journal bearings in zero-field and field-cooled modes. IEEE Transactions on Applied Superconductivity ASC, 15. pp. 2242-2244. ISSN 1051-8223

Reddy, ES and Babu, NH and Shi, Y and Cardwell, DA (2005) Effect of size, morphology and crystallinity of seed crystal on the nucleation and growth of single grain Y-Ba-Cu-O. Journal of the European Ceramic Society, 25. pp. 2935-2938. ISSN 0955-2219

Reddy, ES and Hari Babu, N and Iida, K and Withnell, TD and Shi, YH and Cardwell, DA (2005) The effect of size, morphology and crystallinity of seed crystals on the nucleation and growth of Y–Ba–Cu–O single-grain superconductors. Superconductor Science and Technology, 18. pp. 64-72. ISSN 0953-2048

Reddy, ES and Hari Babu, N and Shi, Y and Cardwell, DA and Schmitz, G (2005) Processing of large grain Y-123 superconductors with pre-defined porous structures. Superconductor Science and Technology, 18. S15-S18. ISSN 0953-2048

Reddy, ES and Hari Babu, N and Shi, YH and Cardwell, DA (2005) Effect of size, morphology and crystallinity of seed crystal on the nucleation and growth of single grain Y-Ba-Cu-O. Journal of the European Ceramic Society, 25. pp. 2935-2938. ISSN 0955-2219

Rentzsch, W and Shercliff, HR and Brechet, Y and Legras, L (2005) Knowledge management for materials processing. Advanced Engineering Materials, 7. pp. 30-39. ISSN 1438-1656

Rockenbauer, A and Csanyi, G and Fulop, F and Garaj, S and Korecz, L and Lukacs, R and Simon, F and Forro, L and Pekker, S and Janossy, A (2005) Electron delocalization and dimerization in solid C59N doped C60 fullerene. In: 19th International Winter School/Euroconference, 12-3-2005 to 19-3-2005, Kirchberg, Austria pp. 41-45..

Rockenbauer, A and Csanyi, G and Fulop, P and Garaj, S and Korecz, L and Lukacs, R and Simon, F and Forro, L and Pekker, S and Janossy, A (2005) Electron delocalization and dimerization in solid C59N doped C60 fullerene. Physical Review Letters, 94. 066603-066607. ISSN 0031-9007

Ruiz Alonso, D and Coombs, TA and Campbell, AM (2005) Numerical solutions to the critical state in a magnet-high temperature superconductor interaction. Superconductor Science and Technology, 18. S209-S214. ISSN 0953-2048

Rutter, NA and Durrell, JH and Blamire, MG and MacManus-Driscoll, JL and Wang, H and Foltyn, SR (2005) Benefits of current percolation in superconducting coated conductors. Applied Physics Letters, 87. ISSN 0003-6951

Rutter, NA and Durrell, JH and Mennema, SH and Blamire, MG and MacManus-Driscoll, JL (2005) Transport properties of Ca-doped YBCO coated conductors. In: UNSPECIFIED pp. 2570-2573..

Saadatfar, M and Kabla, A and Senden, TJ and Aste, T (2005) The geometry and the number of contacts of monodisperse sphere packs using X-ray tomography. Powders and Grains 2005 - Proceedings of the 5th International Conference on Micromechanics of Granular Media, 1. pp. 33-36.

Seshia, AA (2005) Integrated resonant microstructures for sensor and timing applications. In: 8th International Conference on Modeling and Simulation of Microsystems (MSM2005), 8-5-2005 to 12-5-2005, Anaheim, CA, USA.

Seshia, AA (2005) A linear model for phase noise in silicon micro-electro-mechanical resonator oscillators. In: 6th Conference on MEMS for Millimeter-Wave Communications, 23-6-2005 to 24-6-2005, Lausanne, Switzerland.

Shercliff, HR and Russell, MJ and Taylor, A and Dickerson, TL (2005) Microstructural modelling in friction stir welding of 2000 series aluminium alloys. Mecanique et Industries, 6. pp. 25-35. ISSN 1296-2139

Shercliff, HR and Russell, MJ and Taylor, AD and Dickerson, TL (2005) Microstructural modelling in friction stir welding of 2000 series aluminium alloys. Mécanique et Industries (Journal of the Association Française de Mécanique), 6. pp. 25-35.

Shergold, OA and Fleck, NA (2005) Experimental investigation into the deep penetration of soft solids by sharp and blunt punches, with application to the piercing of skin. ASME Transactions, Journal of Biomechanical Engineering, 127. pp. 838-848. ISSN 0148-0731

Shi, YH and Hari Babu, N and Cardwell, DA (2005) Development of a generic seed crystal for the fabrication of large grain (RE)-Ba-Cu-O Bulk superconductors. Superconductor Science and Technology, 18. L13-L16. ISSN 0953-2048

Skordos, AA and Aceves, CM and Sutcliffe, MPF (2005) Design selection methodology for composite structures. In: 15th International Conference on Composite Materials; ICCM' 05, -6-2005 to --, Durban, South Africa pp. 109-110..

Skordos, AA and Sutcliffe, MPF and Aceves, CM (2005) Development of a simplified finite element model for draping and wrinkling of woven material. In: 8th International Conference on Material Forming, -4-2005 to --, Cluj-Napoca, Romania pp. 951-954..

Sridhar, I and Fleck, NA (2005) The multiaxial yield behaviour of an aluminium alloy foam. Journal of Materials Sciences, 40. pp. 4005-4008. ISSN 0022-2461

Steeves, CA and Fleck, NA (2005) Compressive strength of composite laminates with terminated internal plies. Composites Part A: applied science and manufacturing, 36. pp. 798-805. ISSN 1359-835X

Suiker, ASJ and Fleck, NA (2005) Failure mechanics in brittle laminates. In: 11th International Conference on Fracture, 20-3-2005 to 25-3-2005, Turin, Italy pp. 336-340..

Sutcliffe, MPF and Liu, F and Cheng, L (2005) Process map development for chemical mechanical polishing with low-k material. In: 3rd Conference on World Tribology Congress, -9-2005 to --, Washington, DC, UK pp. 411-412..

Symons, DD and Hutchinson, JW and Fleck, NA (2005) Actuation of the Kagome double layer grid: Part 1: prediction of the performance of the perfect structure. Journal of the Mechanics and Physics of Solids, 53. pp. 1855-1874. ISSN 0022-5096

Symons, DD and Hutchinson, RG and Fleck, NA (2005) Actuation of the kagome double layer grid. Part 1: Prediction of performance of the perfect structure. Journal of the Mechanics and Physics of Solids, 53. pp. 1855-1874. ISSN 0022-5096

Symons, DD and Shieh, J and Fleck, NA (2005) Actuation of the Kagome double layer grid: Part 2: effect of imperfections on measured and predicted actuation stiffness. Journal of the Mechanics and Physics of Solids, 53. pp. 1875-1891. ISSN 0022-5096

Tagarielli, VL and Deshpande, VS and Fleck, NA and Chen, C (2005) A constitutive model for transversely isotropic foams, and its application to the indentation of balsa wood. International Journal of Mechanical Sciences, 47. pp. 666-686. ISSN 0020-7403

Tagarielli, VL and Deshpande, VS and Fleck, NA and Chen, C (2005) A constitutive model for transversely isotropic foams: application to the indentation of balsa wood. International Journal of Mechanical Sciences, 47. pp. 666-686. ISSN 0020-7403

Tagarielli, VL and Fleck, NA (2005) A comparison of the structural response of clamped and simply supported sandwich beams with aluminium faces and a metal foam core. ASME Transactions, Journal of Applied Mechanics, 72. pp. 408-417. ISSN 0021-8936

Tan, PJ and Reid, SR and Harrigan, JJ and Fleck, NA and Deshpande, VS (2005) Discussion: "The resistance of clamped sandwich beams to shock loading" (Fleck, N. A., and Deshpande, V. S., 2004, ASME J. Appl. Mech., 71, pp. 386-401). Journal of Applied Mechanics, Transactions ASME, 72. pp. 978-980. ISSN 0021-8936

Thompson, MG and Marinelli, C and Zhao, X and Sellin, RL and Penty, RV and White, IH and Kaiander, IN and Bimberg, D and Kang, DJ and Blamire, MG (2005) Colliding-pulse modelocked quantum dot lasers. Electronics Letters, 41. pp. 248-250. ISSN 0013-5194

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, P and Miller, DB (2005) Influence of friction on roughening of the matt surface in aluminium pack rolling. International Journal of Machine Tools and Manufacture, 45. pp. 803-809. ISSN 0890-6955

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DP (2005) Evolution of matt surface topography in aluminium pack rolling. In: 3rd Conference on World Tribology Congress, -9-2005 to --, Washington, DC, USA 63172-..

Utsunoyima, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2005) Evolution of matt surface topography in aluminium pack rolling. In: Proceedings of the 3rd ASME World Tribology Congress, 12-9-2005 to 16-9-2005, Washington D.C., USA pp. 813-814..

Wang, P and Burstein, GT and Le, HR and Sutcliffe, MPF (2005) The electrode potential of freshly generated aluminium surfaces in lubricating oil. TRIBOL LETT, 18. pp. 487-491. ISSN 1023-8883

Williams, JA (2005) Engineering Tribology. Cambridge University Press, Cambridge, UK, -.

Williams, JA (2005) Wear and wear particles: some fundamentals. Tribology International, 38. pp. 863-870.

Williams, JA (2005) The influence of repeated loading, residual stresses and shakedown on the behaviour of tribological contacts. Tribology International, 38. pp. 786-797.

Williams, JA (2005) The influence of repeated loading, residual stresses and shakedown on the behaviour of tribological contacts. Tribology International, 38. pp. 786-797. ISSN 0301-679X

Williams, JA and Faszer, KLD (2005) Tribological properties of mems materials measured on a small-scale device. Proceedings of the World Tribology Congress III - 2005. pp. 737-738.

Williams, JA and Kauzlarich, JJ (2005) The influence of peel angle on the mechanics of peeling flexible adherends with arbitrary load-extension characteristics. Tribology International, 38. pp. 951-958. ISSN 0301-679X

Withnell, TD and Hari Babu, N and Majoros, M and Reddy, ES and Astill, DM and Shi, Y and Cardwell, DA and Campbell, AM and Kerley, N and Zhang, S (2005) Trapped field in individual and stacked rings of bulk melt processed Y-Ba-Cu-O. IEEE Transactions on Applied Superconductivity, 15. pp. 3125-3128. ISSN 1051-8223

Yan, J and Seshia, AA (2005) Effects of etch holes in microelectromechanical resonators. In: 8th International Conference on Modeling and Simulation of Microsystems (MSM2005), 8-5-2005 to 12-5-2005, Anaheim, CA, USA pp. 577-580..

Yan, J and Seshia, AA and Steeneken, PG and van Beek, JTM (2005) A test structure for Young modulus extraction through capacitance-voltage measurements. In: 4th IEEE Conference on Sensors (IEEE Sensors 2005), 31-10-2005 to 3-11-2005, Irvine, CA, USA -..

Yan, JZ and Seshia, AA and Steeneken, P and Van Beek, J (2005) A test structure for young modulus extraction through capacitance-voltage measurements. In: UNSPECIFIED pp. 901-903..

Zhu, HX and Fleck, NA and Cocks, ACF and Evans, AG (2005) Numerical simulations of crack formation from pegs in thermal barrier systems with NiCoCrAlY bond coats. Materials Science and Engineering A, 404. pp. 26-32. ISSN 0921-5093

Zhu, HX and Fleck, NA and Cocks, ACF and Evans, AG (2005) Numerical simulations of crack formation from pegs in thermal barrier systems with NiCoCrAlY bond coats. MAT SCI ENG A-STRUCT, 404. pp. 26-32. ISSN 0921-5093

2004

Ashby, MF and Brechet, YJM and Cebon, D and Salvo, L (2004) Selection strategies for materials and processes. Materials and Design, 25. pp. 51-67. ISSN 0261-3069

Bergounioux, S and Ossa, EA and Deshpande, VS and Cebon, D (2004) Monotonic and cyclic behaviour of polymer-modified bitumens. Road Materials and Pavement Design, 5. pp. 25-44. ISSN 1468-0629

C?te, F and Deshpande, VS and Fleck, NA and Evans, AG (2004) The out-of-plane compressive behavior of metallic honeycombs. Materials Sciences and Engineering A, 380. pp. 272-280. ISSN 0921-5093

Campbell, AM and Loram, JW and Hari Babu, N and Cooper, JR and Cardwell, DA (2004) The reversible magnetisation of a strong pinning superconductor. Physical Review B, 70. p. 214518. ISSN 1098-0121

Campbell, AM and Loram, JW and Hari Babu, N and Cooper, JR and Cardwell, DA (2004) The reversible magnetization of a strong-pinning superconductor. Physical Review B (Condensed Matter and Materials Physics), 70. 214518-. ISSN 1098-0121

Cantoro, M and Hofmann, S and Kleinsorge, B and Csanyi, G and Payne, MC and Ferrari, AC and Robertson, J (2004) Direct growth of carbon nanofibers on plastic substrates. In: Electric Properties of Synthetic Nanostructures: 17th International Winterschool/Euroconference on Electronic Properties of Novel Materials. AIP Conference Proceedings, 723 . American Institute of Physics, pp. 81-86. ISBN 0735402043

Cantoro, M and Hofmann, S and Kleinsorge, B and Csanyi, G and Payne, MC and Ferrari, AC and Robertson, J (2004) Direct growth of carbon nanofibers on plastic substrates. In: UNSPECIFIED pp. 81-84..

Cardwell, DA and Murakami, M and Zeisberger, M and Gawalek, W and Gonzalez Arrabal, R and Eisterer, M and Weber, HW and Fuchs, G and Krabbes, G and Leenders, A and Freyhardt, HC and Chaud, X and Tournier, R and Hari Babu, N (2004) Round robin measurements of the flux trapping properties of melt processed Sm-Ba-Cu-O bulk superconductors. Physica C, 412-41. pp. 623-632. ISSN 0921-4534

Cartié, DR and Cox, BN and Fleck, NA (2004) Mechanisms of crack bridging by composite and metallic rods. Composites Part A: Applied Science and Manufacturing, 35. pp. 1325-1336. ISSN 1359-835X

Chang, SH and Sutcliffe, MPF and Sharma, SB (2004) Microscopic investigation of tow geometry changes in a woven prepreg material during draping. Composites Science and Technology, 64. pp. 1701-1707. ISSN 0266-3538

Chen, X and He, MY and Spitsberg, I and Fleck, NA and Hutchinson, JW and Evans, AW (2004) Mechanisms governing the high temperature erosion of thermal barrier coatings. Wear, 256. pp. 735-746.

Colegrove, PA and Shercliff, HR (2004) 2-Dimensional CFD modelling of flow round profiled FSW tooling. Science and Technology of Welding and Joining, 9. pp. 483-492.

Colegrove, PA and Shercliff, HR (2004) Development of the Trivex friction stir welding tool: Part I – 2- Dimensional flow modelling and experimental validation. Science and Technology of Welding and Joining, 9. pp. 345-351.

Colegrove, PA and Shercliff, HR (2004) Development of the Trivex friction stir welding tool: Part II – 3 - Dimensional flow modelling. Science and Technology of Welding and Joining, 9. pp. 352-361.

Colegrove, PA and Shercliff, HR (2004) Modelling the friction stir welding of aerospace alloys. In: 5th International Friction Stir Welding Symposium, 14-9-2004 to 16-9-2004, Metz, France.

Colegrove, PA and Shercliff, HR and Hyoe, T (2004) Development of the Trivex friction stir welding tool for making lap welds. In: 5th International Friction Stir Welding Symposium, 14-9-2004 to 16-9-2004, Metz, France.

Csanyi, G and Albaret, T and Payne, MC and De Vita, A (2004) "Learn on the fly": A hybrid classical and quantum-mechanical molecular dynamics simulation. Physical Review Letters, 93. p. 175503-. ISSN 0031-9007

Csanyi, G and Albaret, T and Payne, MC and De Vita, A (2004) "Learn on the fly": A hybrid classical and quantum-mechanical molecular dynamics simulation. PHYS REV LETT, 93. -. ISSN 0031-9007

Csanyi, G and Szendroi, B (2004) Az internet szabadsága. Koktél Magazin.

Csanyi, G and Szendroi, B (2004) Fractal-small-world dichotomy in real-world networks. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 70. 016122-. ISSN 1063-651X

Csanyi, G and Szendroi, B (2004) Structure of a large social network. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 69. 036131-. ISSN 1063-651X

Csanyi, G and Szendroi, B (2004) Szociális hálózatok. Beszélö.

Csányi, G and Szendroi, B (2004) Fractal-small-world dichotomy in real-world networks. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 70. 016122-1-016122-5. ISSN 1539-3755

Csányi, G and Szendroi, B (2004) Fractal-small-world dichotomy in real-world networks. Phys Rev E Stat Nonlin Soft Matter Phys, 70. 016122-. ISSN 1539-3755

Csányi, G and Szendroi, B (2004) Structure of a large social network. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 69. 036131-1-036131-5. ISSN 1063-651X

Csányi, G and Szendroi, B (2004) Structure of a large social network. Phys Rev E Stat Nonlin Soft Matter Phys, 69. 036131-. ISSN 1539-3755

Côte, F and Deshpande, VS and Fleck, NA and Evans, AG (2004) The out-of-plane compressive behavior of metallic honeycombs. Materials Sciences and Engineering A, 380. pp. 272-280. ISSN 0921-5093

Davy, CA and Bolton, MD and Fleck, NA (2004) The shearing behaviour of a sugar aggregate. Acta Materialia, 52. pp. 3587-3601. ISSN 1359-6454

Deshpande, VS and Cebon, D (2004) Micromechanical modeling of steady-state deformation in asphalt. ASCE Journal of Materials in Civil Engineering, 16. pp. 100-106. ISSN 0899-1561

Deshpande, VS and Cebon, D (2004) Micromechanical modeling of steady-state deformation in asphalt. J MATER CIVIL ENG, 16. pp. 100-106. ISSN 0899-1561

Deshpande, VS and Needleman, A and Van der Giessen, E (2004) Discrete dislocation predictions of single crystal fatigue crack growth. In: UNSPECIFIED pp. 79-86..

Deshpande, VS and Needleman, A and van der Giessen, E (2004) Discrete dislocation plasticity analysis of static friction. Acta Materialia, 52. pp. 3135-3149. ISSN 1359-6454

Diko, P and Zmorayová, K and Hari Babu, N and Krabbes, G and Cardwell, DA (2004) The influence of the addition of depleted uranium on particle pushing in melt-processed, bulk Y-Ba-Cu-O. Superconductor Science and Technology, 17. pp. 186-193. ISSN 0953-2048

Durrell, JH and Burnell, G and Tsaneva, VN and Barber, ZH and Blamire, MG and Evetts, JE (2004) Critical currents in vicinal YBa2Cu3O7-delta films. PHYS REV B, 70. -. ISSN 1098-0121

Durrell, JH and Hogg, MJ and Rutter, NA and Driscoll, JL and Barber, ZH and Glowacki, BA and Blamire, MG and Evetts, JE (2004) Properties of oblique YBa2Cu3O7-delta artificial grain boundaries. In: UNSPECIFIED pp. 61-63..

Feih, S and Shercliff, HR (2004) Adhesive and composite failure prediction of single-L joint structures under tensile loading. International Journal of Adhesion and Adhesives, 25. pp. 47-59.

Feih, S and Shercliff, HR (2004) The validation of boundary conditions for finite element analyses. In: NAFEMS Advanced Workbook of Examples and Case Studies (Volume 2). NAFEMS, East Kilbride.

Fleck, NA (2004) An overview of the mechanical properties of foams and periodic lattice materials. In: International Conference on Fracture, -10-2004 to --, Germany.

Fleck, NA and Deshpande, VS (2004) The resistance of clamped sandwich beams to shock loading. Transactions of the ASME, Journal of Applied Mechanics, 71. pp. 386-401. ISSN 0021-8936

Fleck, NA and Willis, JR (2004) Bounds and estimates for the effect of strain gradients upon the effective plastic properties of an isotropic two phase composite. Journal of the Mechanics and Physics of Solids, 52. pp. 1855-1888.

H R, L and M P F, S (2004) The effect of surface deformation on lubrication and oxide scale fracture in cold metal rolling. Metallurgical and Materials Transactions B, 35. pp. 919-928.

H R, L and M P F, S and P Z, W and G T, B (2004) Surface oxide fracture in cold aluminium rolling. Acta Materialia, 52. pp. 911-920. ISSN 1359-6454

H R, L and M P F, S and P Z, W and G T, B (2004) Development of metal-to-metal contact in forming of aluminium with boundary lubrication. In: 2nd International Conference on International Conference on Tribology in Manufacturing Processes (ICTMP2004), 15-6-2004 to 18-6-2004, Nyborg, Denmark.

Huber, JE and Fleck, NA (2004) Ferroelectric switching – a micromechanics model versus measured behaviour. European Journal of Mechanics - A / Solids, 23. pp. 203-217. ISSN 0997-7538

J A, W and H R, L (2004) Some aspects of tribological behaviour at the microscale - with particular reference to MEMs and MMAs. In: The 31st Leeds-Lyon Symposium on Tribology; Life Cycle Tribology, -9-2004 to -- pp. 77-88..

Kabla, A and Debregeas, G and Meglio, JMD and Senden, T (2004) X-ray observation of micro-failures in granular piles approaching an avalanche.

Kabla, A and Debrégeas, G (2004) Contact dynamics in a gently vibrated granular pile. Phys Rev Lett, 92. 035501-. ISSN 0031-9007

Kis, A and Csanyi, G and Salvetat, JP and Lee, T and Couteau, E and Kulik, A and Benoit, W and Brugger, J and Forro, L (2004) Reinforcement of single-walled carbon nanotube bundles by intertube bridging. Nature Materials, 3. pp. 153-157. ISSN 1476-1122

Kooistra, GW and Deshpande, VS and Wadley, HNG (2004) Compressive behaviour of age hardenable tetrahedral lattice truss structures made from aluminium. Acta Materialia, 52. pp. 4229-4237. ISSN 1359-6454

Lacerda, RG and Teo, KBK and Teh, AS and Yang, MH and Dalal, SH and Jefferson, DA and Durrell, JH and Rupesinghe, NL and Roy, D and Amaratunga, GAJ and Milne, WI and Wyczisk, F and Legagneux, P (2004) Thin-film metal catalyst for the production of multi-wall and single-wall carbon nanotubes. Journal of Applied Physics, 96. pp. 4456-4462. ISSN 0021-8979

Lacerda, RG and Teo, KBK and Teh, AS and Yang, MH and Dalal, SH and Jefferson, DA and Durrell, JH and Rupesinghe, NL and Roy, D and Amaratunga, GAJ and Milne, WI and Wyczisk, F and Legagneux, P and Chhowalla, M (2004) Thin-film metal catalyst for the production of multi-wall and single-wall carbon nanotubes. Journal of Applied Physics, 96. pp. 4456-4462. ISSN 0021-8979

Le, HR and Sutcliffe, MPF and Wang, PZ and Burstein, GT (2004) Surface oxide fracture in cold aluminium rolling. ACTA MATER, 52. pp. 911-920. ISSN 1359-6454

Le, HR and Sutcliffe, MPF and Williams, JA (2004) Friction and material transfer in micro-scale sliding contact between aluminium alloy and steel. Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2004. pp. 309-316.

Lee, HR and Sutcliffe, MPF (2004) Finite element modelling of the evolution of surface pits in metal forming processes. Journal of Materials Processing Technology, 145. pp. 391-396. ISSN 0924-0136

Liu, D and Fleck, NA and Sutcliffe, MPF (2004) Compressive strength of composites with random fibre waviness. Journal of the Mechanics and Physics and Solids, 52. pp. 1481-1505.

Luo, JK and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2004) Novel normally-off microgrippers using highly stressed diamond-like carbon and Ni bimorph structure. Applied Physics Letters, 85. pp. 5748-5750. ISSN 0003-6951

Luo, JK and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2004) Modelling of microspring thermal actuator. In: NSTI Nanotechnology Conference and Trade Show - Nanotech 2004; Vol. 1, 7-3-2004 to 11-3-2004, Boston, MA, US pp. 355-358..

Luo, JK and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2004) Young's modulus of electroplated Ni thin film for MEMS applications. Materials Letters, 58. pp. 2306-2309. ISSN 0167-577X

Luo, JK and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2004) Normally closed microgrippers using a highly stressed diamond-like carbon and Ni bimorph structure. Applied Physics Letters, 85. pp. 5748-5750. ISSN 0003-6951

Luo, JK and He, JH and Flewitt, AJ and Moore, DF and Spearing, SM and Fleck, NA and Milne, WI (2004) Development of all metal electro-thermal actuator and its applications. Proceedings of SPIE - The International Society for Optical Engineering, 5344. pp. 201-210. ISSN 0277-786X

Luo, JK and He, JH and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2004) Microgripper using a diamond like carbon/metal bilayer. In: UNSPECIFIED pp. 283-286..

Markaki, AE and Clyne, TW (2004) Elastic properties of thin sandwich panels with fibrous metallic cores. Euromech Newsletter, 26. pp. 10-18.

Markaki, AE and Clyne, TW (2004) Magneto-mechanical stimulation of bone growth in a bonded array of ferromagnetic fibres. BIOMATERIALS, 25. pp. 4805-4815. ISSN 0142-9612

Mishra, AK and Hari Babu, N and He, P and Ferendeci, AM and Cardwell, DA and Isfort, D and Chaud, X and Tournier, R and Mast, DM and Shi, D (2004) Surface resistance measurements of single domain YBa2Cu3Ox. Physica C, 402. pp. 277-282. ISSN 0921-4534

Moore, DF and Williams, JA (2004) Laser prototyping of MEMS structures and SiN cantilvers: experience teaching a practical undergraduate course. IEE Proceedings on Science Measurement and Technology, 151. pp. 54-60. ISSN 1350-2344

Morgan, CN and Silver, M and Williams, KA and Atlasis, A and Bennett, PJ and Zhao, X and Penty, RV and White, IH and Kang, D-J and Blamire, MG (2004) Novel wideband active waveguide photonic crystal polarisation selector. OSA Trends in Optics and Photonics Series, 96 A. pp. 1631-1632. ISSN 1094-5695

Nygard, K and Huotari, S and Hämäläinen, K and Manninen, S and Hari Babu, N and Kambara, M and Cardwell, DA (2004) Temperature dependence of MgB2 Compton profiles. Physical Review B (Condensed Matter and Materials Physics), 69. 020501-. ISSN 1098-0121

Ossa, EA and Deshpande, VS and Cebon, D (2004) Triaxial deformation behaviour of bituminous mixes. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Ossa, EA and Deshpande, VS and Cebon, D (2004) Uniaxial monotonic and cyclic deformation behaviour of bituminous mixes. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Oyen, M (2004) Prose, indeed [5]. Economist, 371. p. 14. ISSN 0013-0613

Oyen, ML and Calvin, SE and Cook, RF (2004) Uniaxial stress-relaxation and stress-strain responses of human amnion. Journal of Materials Science: Materials in Medicine, 15. pp. 619-624. ISSN 0957-4530

Oyen, ML and Cook, RF and Calvin, SE (2004) Mechanical failure of human fetal membrane tissues. Journal of Materials Science: Materials in Medicine, 15. pp. 651-658. ISSN 0957-4530

Oyen, ML and Cook, RF and Emerson, JA and Moody, NR (2004) Erratum: "Indentation responses of time-dependent films on stiff substrates" [J. Mater. Res. 19, 2487 (2004)]. Journal of Materials Research, 19. pp. 3120-3121. ISSN 0884-2914

Oyen, ML and Cook, RF and Emerson, JA and Moody, NR (2004) Indentation responses of time-dependent films on stiff substrates. J MATER RES, 19. pp. 2487-2497. ISSN 0884-2914

Oyen, ML and Cook, RF and Emerson, JA and Moody, NR (2004) Indentation responses of time-dependent films on stiff substrates (vol 19, pg 2487, 2004). J MATER RES, 19. pp. 3120-3121. ISSN 0884-2914

Oyen, ML and Cook, RF and Moody, NR and Emerson, JA (2004) Indentation responses of time-dependent films on stiff substrates. Journal of Materials Research, 19. pp. 2487-2497. ISSN 0884-2914

Oyen, ML and Ko, C-C (2004) Variability of nanoindentation responses of bone and artificial bone-like composites. Advances in Bioengineering, BED. pp. 391-392. ISSN 0360-9960

Pedersen, CBW and Seshia, AA (2004) Compliant force amplifier mechanisms for surface-mircromachined resonant accelerometers. In: 7th International Conference on Modeling and Simulation of Microsystems, MSM' 04, 7-3-2004 to 11-3-2004, Boston, MA, USA pp. 331-334..

Pedersen, CBW and Seshia, AA (2004) On the optimization of compliant force amplifier mechanisms for surface micromachined resonant accelerometers. Journal of Micromechanics and Microengineering, 14. pp. 1281-1293. ISSN 0960-1317

Phani, AS and Seshia, AA (2004) Identification of anisoelasticity and nonproportional damping in MEMS gyroscopes. In: 7th International Conference on Modeling and Simulation of Microsystems, MSM' 04, 7-3-2004 to 11-3-2004, Boston, MA, USA pp. 343-346..

Phani, AS and Seshia, AA and Palaniapna, M and Howe, RT and Yasaitis, J (2004) Coupling of resonant modes in micromechanical vibratory rate gyroscopes. In: 7th International Conference on Modeling and Simulation Microsystems, MSM' 04, 7-3-2004 to 11-3-2004, Boston, USA pp. 335-338..

Preston, RV and Shercliff, HR and Withers, PJ and Smith, SD (2004) Physically-based constitutive modelling of residual stress development in welding of aluminium alloy 2024. Acta Materialia, 52. pp. 4973-4983. ISSN 1359-6454

Qiu, X and Deshpande, VS and Fleck, NA (2004) Dynamic response of a clamped circular sandwich plate subject to shock loading. ASME Transactions, Journal of Applied Mechanics, 71. pp. 637-645. ISSN 0021-8936

Reddy, ES and Babu, NH and Shi, Y and Cardwell, D (2004) The existence of a highly undercooled state during the formation of Y2BaCuO5 in large grain Y–Ba–Cu–O superconductors. Superconductor Science and Technology, 17. L1-L5. ISSN 0953-2048

Robson, JD and Sullivan, A and Shercliff, HR and McShane, G (2004) Microstructural evolution during friction stir welding of AA7449. In: 5th International Friction Stir Welding Symposium, 14-9-2004 to 16-9-2004, Metz, France.

Ruiz Alonso, D and Coombs, TA and Campbell, AM (2004) Computer modelling of high-temperature superconductors using an A-V formulation. Superconductor Science and Technology, 17. S305-S310. ISSN 0953-2048

Ruiz Alonso, D and Coombs, TA and Campbell, AM (2004) Numerical analysis of high-temperature superconductors with the critical-state model. IEEE Transactions on Applied Superconductivity, 14. pp. 2053-2063. ISSN 1051-8223

Sefcikova, M and Zmorayova, K and Diko, P and Hari Babu, N and Cardwell, DA (2004) Nano-sized pinning centres in YBCO bulk superconductors with complex alloying. Czechoslovak Journal of Physics, 54. D473-D476. ISSN 0011-4626

Sharma, SB and Sutcliffe, MPF (2004) A simplified finite element model for draping of woven material. Composites A: Applied Science and Manufacturing, 35. pp. 637-643. ISSN 1359-835X

Shergold, OA and Fleck, NA (2004) Mechanisms of deep penetration of soft solids, with application to the injection and wounding of skin. Proceedings of the Royal Society of London A, 460. pp. 3037-3058. ISSN 1364-5021

Steeves, C and Fleck, NA (2004) Collapse mechanisms of sandwich beams with composite face sheets and a foam core, loaded in three-point bending: Part I: analytical models and minimum weight design. International Journal of Mechanical Sciences, 46. pp. 561-583. ISSN 0020-7403

Steeves, C and Fleck, NA (2004) Collapse mechanisms of sandwich beams with composite face sheets and a foam core, loaded in three-point bending: Part II: experimental investigation and numerical modelling. International Journal of Mechanical Sciences, 46. pp. 585-608. ISSN 0020-7403

Steeves, C and Fleck, NA (2004) Material selection in sandwich beam construction. Scripta Materialia, 50. pp. 1335-1339. ISSN 1359-6462

Suiker, ASJ and Fleck, NA (2004) Crack tunnelling and plane-strain delamination in layered solids. International Journal of Fracture, 125. pp. 1-32. ISSN 0376-9429

Suiker, ASJ and Fleck, NA (2004) Frictional collapse of granular assemblies. ASME Transactions, Journal of Applied Mechanics, 71. pp. 350-358.

Sutcliffe, MPF and Combarieu, R and Montmitonnet, P (2004) Effect of additives on friction during plane strain compression of aluminium strip. Wear, 257. pp. 1071-1080.

Sutcliffe, MPF and Combarieu, R and Montmitonnet, P (2004) Plane strain compression tests of aluminium strip under boundary lubrication conditions. In: 2nd International Conference on International Conference on Tribology in Manufacturing Processes (ICTMP2004), 15-6-2004 to 18-6-2004, Nyborg, Denmark.

Szendroi, B and Csanyi, G (2004) Polynomial epidemics and clustering in contact networks. Proceedings of the Royal Society Biology Letters -Supplement-, 271. S364-S366. ISSN 0962-8452

Tagarielli, VL and Fleck, NA and Deshpande, VS (2004) Collapse of clamped and simply supported composite sandwich beams in three-point bending. Composites B: Engineering, 35. pp. 523-534. ISSN 1359-8368

Tagarielli, VL and Fleck, NA and Deshpande, VS (2004) The collapse response of sandwich beams with aluminium face sheets and a metal foam core. Advanced Engineering Materials, 6. pp. 440-443. ISSN 1438-1656

Thompson, MG and Marinelli, C and Chu, Y and Sellin, RL and Penty, RV and White, IH and Van der Poel, M and Birkedal, D and Hvam, J and Ustinov, VM and Lammlin, M and Bimberg, D (2004) Novel single mode laser operation through transverse mode coupling in a 2-D photonic crystal. In: 19th IEEE International Semiconductor Laser Conference, -- to --.

Thompson, MG and Tan, KT and Marinelli, C and Williams, KA and Penty, RV and White, IH and Kuntz, M and Ouyang, D and Bimberg, D and Ustinov, VM and Zhukov, AE and Kovsh, AR and Ledentsov, NN and Kang, DJ and Blamire, MG (2004) Transform-limited optical pulses from 18 GHz monolithic modelocked quantum dot lasers operating at ~1.3 ?m. Electronics Letters, 40. pp. 346-347. ISSN 0013-5194

Thompson, MG and Tan, KT and Marinelli, C and Williams, KA and Sellin, RL and Penty, RV and White, IH and Kaiander, IN and Bimberg, D and Visinka, F and Jochum, S and Hansmann, S and Kang, DJ and Blamire, MG (2004) Mode-locked quantum dot lasers for picosecond pulse generation. Proceedings of SPIE: Novel In-Plane Semiconductor Lasers III, 5365. pp. 107-116. ISSN 0277-786X

Thompson, MG and Tan, KT and Marinelli, C and Williams, KA and Sellin, RL and Penty, RV and White, IH and Kuntz, M and Ouyang, D and Kaiander, IN and Ledentsov, NN and Bimberg, D and Ustinov, VM and Zhukov, AE and Kovsh, AR and Visinka, F and Jochum, S and Hansmann, S and Kang, DJ and Blamire, MG (2004) Mode-locking of InGaAs quantum dot lasers. In: UNSPECIFIED pp. 117-129..

Tsaneva, VN and Donchev, TI and Popov, TK and Durrell, JH and Blamire, MG and Barber, ZH and Evetts, JE (2004) Optical emission studies of the plasma during high-pressure sputtering of Y-Ba-Cu-O targets. In: UNSPECIFIED pp. 257-260..

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2004) Evolution of matt surface topography in aluminium pack rolling: Part I – model development. International Journal of Mechanical Sciences, 46. pp. 1349-1364. ISSN 0020-7403

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2004) Evolution of matt surface topography in aluminium pack rolling: Part II – effect of material properties. International Journal of Mechanical Sciences, 46. pp. 1365-1375. ISSN 0020-7403

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2004) Three-dimensional topography of the matt surface in aluminium pack rolling. International Journal of Mechanical Sciences, 46. pp. 1083-1096. ISSN 0020-7403

Utsunoyima, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2004) Three-dimensional topography of the matt surface in aluminium pack rolling. International Journal of Mechanical Sciences, 46. pp. 1083-1096. ISSN 0020-7403

Williams, JA (2004) The behaviour of sliding contacts between non-conformal rough surfaces protected by 'smart' films. Tribology Letters, 17. pp. 765-778.

Williams, JA and Kauzlarich, JJ (2004) Peeling shear and cleavage failure due to tape prestrain. Journal of Adhesion, 80. pp. 433-458. ISSN 0021-8464

Zeimetz, B and Tadinada, K and Eves, DE and Coombs, TA and Evetts, JE and Campbell, AM (2004) Thermal instability and current-voltage scaling in superconducting fault current limiters. Superconductor Science and Technology, 17. pp. 657-662. ISSN 0953-2048

Zhao, X and Williams, KA and Bennett, PJ and Chu, Y and Penty, RV and White, IH and Lin, YX and Yu, YC and Huang, YL and Kang, DJ and Blamire, MG (2004) Novel single-mode laser operation using 2D photonic crystal. Proceedings of SPIE: Active and Passive Optical Components for WDM Communications IV, 5595. pp. 36-44. ISSN 0277-786X

Zmorayova, K and Sefcikova, M and Diko, P and Hari Babu, N and Cardwell, DA (2004) New pinning centres in YBCO bulk superconductors with depleted uranium addition. Czechoslovak Journal of Physics, 54. D469-D472. ISSN 0011-4626

Zupan, M and Deshpande, VS and Fleck, NA (2004) The out-of-plane compressive behaviour of woven-core sandwich plates. European Journal of Mechanics - A / Solids, 23. pp. 411-421. ISSN 0997-7538

2003

Cardwell, David Anthony, ed. (2003) Handbook of superconducting materials. Institute of Physics Publishing, Bristol, UK, pp. 1155-1158.

Fleck, Norman Andrew, ed. (2003) Proceedings of the International Conference on Cellular Metals: Manufacturing, Properties, Applications (MetFoam'03). MIT-Verlag, Breman, Germany.

Ashby, MF and Cebon, D (2003) New approaches to materials education for students of engineering. In: ASEE Annual Conference & Exposition, 22-6-2003 to 25-6-2003, Nashville, Tennessee.

Babu, NH and Cardwell, DA and Tarrant, CD and Schneider, KR (2003) U-doped Y-Ba-Cu-O melt-processed superconductor. Tsinghua Science and Technology, 8. pp. 242-250. ISSN 1007-0214

Babu, NH and Kambara, M and Cardwell, DA and Campbell, DA (2003) Solidification path of YxNd1−x+yBa2−yCu3O6+δ superconducting composites. Superconductor Science and Technology, 16. pp. 1286-1293. ISSN 0953-2048

Babu, NH and Kambara, M and Shi, Y and Cardwell, DA and Tarrant, CD and Schneider, KR (2003) Development of the microstructure of uranium-doped Nd-Ba-Cu-O. IEEE Transactions on Applied Superconductivity, 13. pp. 3147-3150. ISSN 1051-8223

Babu, NH and Kambara, M and Shi, Y and Cardwell, DA and Tarrant, CD and Schneider, KR (2003) The chemical composition of uranium-containing phase particles in U-doped Y-Ba-Cu-O melt processed superconductor. Physica C: Superconductivity and its Applications, 392-39. pp. 110-115. ISSN 0921-4534

Babu, NH and Reddy, ES and Cardwell, DA and Campbell, AM and Tarrant, CD and Schneider, KR (2003) Artificial flux pinning centers in large, single-grain (RE)-Ba-Cu-O superconductors. Applied Physics Letters, 83. pp. 4806-4808. ISSN 0003-6951

Babu, NH and Reddy, ES and Cardwell, DA and Campbell, DA (2003) New chemically stable, nano-size artificial flux pinning centres in (RE)-Ba-Cu-O superconductors. Superconductor Science and Technology, 16. L44-L45. ISSN 0953-2048

Beaumont, PWR (2003) Physical modelling of damage development in structural composite materials under stress. In: Fatigue in Composites: Science and Technology of the Fatigue Response of Fibre-Reinforced Plastics. CRC Press / Woodhead Publishing Limited, Chapter 13-.

Bell, DJ and Lu, TJ and Fleck, NA and Spearing, SM (2003) The selection of MEMS actuators and sensors. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Cansiz, A and Campbell, AM and Coombs, TA (2003) An Evershed type superconducting flywheel bearing. Physics C: Superconductivity and its Applications, 390. pp. 305-310. ISSN 0921-4534

Cardwell, DA (2003) Introduction to bulk melt processing techniques. In: Handbook of Superconducting Materials. Institute of Physics Publishing, Bristol, UK, p.283-.

Cardwell, DA and Babu, NH and Kambara, M and Shi, YH and Tarrant, CD and Schneider, KR (2003) Improved-trapped magnetic fields in top seeded melt grown YBCO superconductor doped with depleted and enriched uranium oxide. Materials Science Forum, 426-43. pp. 3499-3504. ISSN 0255-5476

Cardwell, DA and Babu, NH and Kambara, M and Tarrant, CD and Schneider, KR (2003) Processing and properties of melt processed Y-Ba-Cu-O containing depleted uranium oxide. In: 104th Annual Meeting of The American Ceramic Society, 28-4-2002 to --, Missouri, USA pp. 257-272..

Cardwell, DA and Ginley, DS (2003) Introduction to critical currents of type II superconductors. In: Handbook of Superconducting Materials. Institute of Physics Publishing, Bristol, UK, p.171-.

Cardwell, DA and Ginley, DS (2003) Introduction to superconductivity. In: Handbook of Superconducting Materials. Institute of Physics Publishing, Bristol, UK, p.3-.

Cardwell, DA and Ginley, DS (2003) Introduction to to elementary theories of superconductivity. In: Handbook of Superconducting Materials. Institute of Physics Publishing, Bristol, UK, p.141-.

Cartie, DD and Fleck, NA (2003) The effect of pin reinforcement upon the through-thickness compressive strength of foam-cored sandwich panels. Composites Science and Technology, 63. pp. 2401-2409. ISSN 0266-3538

Cebon, D and Ashby, MF (2003) Data systems for optimal material selection. Advanced Materials and Processes, 161. pp. 51-54. ISSN 0882-7958

Chang, SH and Sharma, SB and Sutcliffe, MPF (2003) Microscopic investigation of tow geometry of a dry satin weave fabric during deformation. Composites Science and Technology, 63. pp. 99-111. ISSN 0266-3538

Chen, C and Deshpande, VS and Fleck, NA (2003) A constitutive model for a transversely isotropic compressible solid: user manual for a UMAT in ABAQUS. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Chen, C and Fleck, NA and Shen, YP (2003) Experimental and micromechanical study of size effects in the constrained deformation of metallic foams. Key Engineering Materials, 243-24. pp. 421-426. ISSN 1013-9826

Chen, Q and Deshpande, VS and van der Giessen, E and Needleman, A (2003) Friction stress effects on mode I crack growth predictions. Scripta Materialia, 48. pp. 755-759. ISSN 1359-6462

Clyne, TW and Gergely, V and Markaki, AE (2003) Special issue of Composite Science and Technology on porous materials - Preface. Composites Science and Technology, 63. p. 2291. ISSN 0266-3538

Colegrove, P and Shercliff, HR (2003) 2-dimensional CFD modeling of flow round profiled FSW tooling. In: 2nd International Conference on Friction Stir Welding and Processing, -3-2003 to --, San Diego, CA, USA pp. 13-22..

Colegrove, PA and Shercliff, HR (2003) Experimental and numerical analysis of aluminium alloy 7075-T7351 friction stir welds. SCI TECHNOL WELD JOI, 8. pp. 360-368. ISSN 1362-1718

Colegrove, PA and Shercliff, HR and Threadgill, PL (2003) Modelling and development of the Trivex friction stir welding tool. In: 4th International Symposium on Friction Stir Welding, 14-5-2003 to 16-5-2003, Park City, Utah, USA.

Coombs, TA and Ruiz Alonso, D and Campbell, AM (2003) Computer simulations of the dynamical behaviour of magnet-HTS systems. In: Applied Superconductivity 2003 : the Sixth European Conference on Applied Superconductivity, 14-9-2003 to 18-9-2003, Sorrento, Italy.

Crotaz, CR and Shercliff, HR (2003) Advanced statistical methods applied to modelling of aluminium processing. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Csanyi, G (2003) Learn-on-the-fly: An adaptive classical/quantum hybrid molecular dynamics scheme. In: MRS Fall Meeting, -- to --, Boston, Massachusetts, U.S.A..

Csanyi, G (2003) Learn-on-the-fly: an adaptive classical/quantum hybrid molecular dynamics scheme. In: CECAM Workshop: Towards Chemical Complexity, -7-2003 to --, Lyon, France.

Csanyi, G and Szendroi, B (2003) Don Juan és a fraktálok. Népszabadság.

Csanyi, G and Szendroi, B (2003) Hálók a hálón. Figyelo. ISSN 0015-086X

Deshpande, VS and Fleck, NA (2003) Blast resistance of sandwich beams. In: The 6th International Conference on International Conference on Sandwich Structures, -4-2003 to --, Fort Lauderdale, FL, US pp. 724-731..

Deshpande, VS and Needleman, A and van der Giessen, E (2003) Discrete dislocation modeling of short cracks in single crystals. Acta Materialia, 51. pp. 1-15. ISSN 1359-6454

Deshpande, VS and Needleman, A and van der Giessen, E (2003) Finite strain discrete dislocation plasticity. Journal of the Mechanics and Physics of Solids, 51. pp. 2057-2083. ISSN 0022-5096

Deshpande, VS and Needleman, A and van der Giessen, E (2003) Scaling of discrete dislocation predictions for near-threshold fatigue crack growth. Acta Materialia, 51. pp. 4637-4651. ISSN 1359-6454

Dickerson, TL and Shercliff, HR and Schmidt, H (2003) A weld marker technique for flow visualisation in friction stir welding. In: 4th International Symposium on Friction Stir Welding, 14-5-2003 to 16-5-2003, Park City, UT, US.

Dickerson, TL and Shi, Q-Y and Shercliff, HR (2003) Heat flow into friction stir welding tools. In: 4th International Symposium on Friction Stir Welding, 14-5-2003 to 16-5-2003, Park City, UT, US.

Diko, P and Zmorayova, K and Babu, NH and Cardwell, DA (2003) Shape change during solidification of bulk, single grain Y-Ba-Cu-O samples fabricated by top seeded melt growth. Physica C: Superconductivity and its Applications, 398. pp. 1-7. ISSN 0921-4534

Durrell, JH and Evetts, JE and Rossler, R and Delamare, MP and Pedarnig, JD and Bauerle, D (2003) Effect of varying material anisotropy on critical current anisotropy in vicinal YBa2Cu3O7-delta thin films. APPL PHYS LETT, 83. pp. 4999-5001. ISSN 0003-6951

Durrell, JH and Hogg, MJ and Kahlmann, F and Barber, ZH and Blamire, MG and Evetts, JE (2003) Critical current of YBa2Cu3O7-delta low-angle grain boundaries. PHYS REV LETT, 90. -. ISSN 0031-9007

Durrell, JH and Mennema, SH and Jooss, C and Gibson, G and Barber, ZH and Zandbergen, HW and Evetts, JE (2003) Flux line lattice structure and behavior in antiphase boundary free vicinal YBa2Cu3O7-delta thin films. Journal of Applied Physics, 93. pp. 9869-9874. ISSN 0021-8979

Fleck, NA and Ashby, MF and Hutchinson, JW (2003) The role of geometrically necessary dislocations in giving material strengthening. Scripta Materialia, 48. pp. 179-183. ISSN 1359-6462

Fleck, NA and Deshpande, VS (2003) Energy absorption of an egg-box material. Journal of the Mechanics and Physics of Solids, 51. pp. 187-208. ISSN 0022-5096

Fleck, NA and Tagarielli, V and Radford, D and Symons, DD (2003) Dynamic loading of composite sandwich beams. In: ASME International Mechanical Engineering Congress, 15-11-2003 to 21-11-2003, Washington, DC, US.

Ginley, DS and Cardwell, DA (2003) Introduction to characteristic properties of superconductors. In: Handbook of Superconducting Materials. Institute of Physics Publishing, Bristol, UK, p.53-.

Ginley, DS and Cardwell, DA (2003) Introduction to thick and thin film superconductors. In: Handbook of Superconducting Materials. Institute of Physics Publishing, Bristol, UK, p.721-.

Ginley, DS and Cardwell, DA (2003) Manufacturer and supplier dictionary. In: Handbook of Superconducting Materials. Institute of Physics Publishing, Bristol, UK, p.2009-.

H R, L and M P F, S (2003) Evolution of surface pits on stainless steel strip in cold rolling and strip drawing. Transactions of the ASME: Journal of Tribology, 125. pp. 384-390. ISSN 0742-4787

H R, L and M P F, S (2003) A friction model for cold strip rolling with two-wavelength surface roughness in the "mixed" lubrication regime. Transactions of the ASME: Journal of Tribology, 125. pp. 670-677. ISSN 0742-4787

Hutchinson, RG and Wicks, N and Evans, AG and Fleck, NA and Hutchinson, JW (2003) Kagome plate structures for actuation. International Journal of Solids and Structures, 40. pp. 6969-6980. ISSN 0020-7683

Hutchinson, RG and Wicks, N and Evans, AG and Fleck, NA and Hutchinson, JW (2003) Kagorne plate structures for actuation. In: UNSPECIFIED pp. 6969-6980..

Hyoe, T and Shercliff, HR and Colegrove, PA (2003) Thermal and microstructure modelling in thick plate aluminium alloy 7075 friction stir welds. In: 2nd International Conference on Friction Stir Welding and Processing, -3-2003 to --, San Diego, CA, USA pp. 33-42..

Kabla, A and Debrégeas, G (2003) Local stress relaxation and shear banding in a dry foam under shear. Phys Rev Lett, 90. 258303-. ISSN 0031-9007

Lewis, JH and Deloria, LB and Oyen Tiesma, M and Thompson, RC and Ericson, M and Oegema, TR (2003) Cell death after cartilage impact occurs around matrix cracks. Journal of Orthopaedic Research, 21. pp. 881-887. ISSN 0736-0266

M P F, S and H R, L and D, F (2003) Simulation of transfer layer formation in strip drawing of stainless steel. Wear, 254. pp. 523-531. ISSN 0043-1648

Markaki, AE and Clyne, TW (2003) Mechanics of thin ultra-light stainless steel sandwich sheet material Part I. Stiffness. ACTA MATER, 51. pp. 1341-1350. ISSN 1359-6454

Markaki, AE and Clyne, TW (2003) Mechanics of thin ultra-light stainless steel sandwich sheet material Part II. Resistance to delamination. ACTA MATER, 51. pp. 1351-1357. ISSN 1359-6454

Markaki, AE and Gergely, V and Cockburn, A and Clyne, TW (2003) Production of a highly porous material by liquid phase sintering of short ferritic stainless steel fibres and a preliminary study of its mechanical behaviour. COMPOS SCI TECHNOL, 63. pp. 2345-2351. ISSN 0266-3538

Marsden, W and Ashby, MF and Cebon, D (2003) New approaches to materials education. In: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 11th AIAA/ASME/AHS Adaptive Structures Forum, 5th AIAA Non-Deterministic Approaches Forum, 4th AIAA Gossamer Spacecraft Forum, AIAA Dynamics Specialists Conference, 7-4-2003 to 10-4-2003, Norfolk, VA, USA pp. 4174-4179..

Masur, L and Kellers, J and Pegrum, CM and Cardwell, DA (2003) Applied properties of superconducting materials. In: Handbook of Superconducting Materials. Institute of Physics Publishing, Bristol, UK, p.27-.

Nevidomskyy, AH and Csanyi, G and Payne, MC (2003) Chemically active substitutional nitrogen impurity in carbon nanotubes. Physical Review Letters, 91. 105502-. ISSN 0031-9007

Nevidomskyy, AH and Csanyi, G and Payne, MC (2003) Chemically active substitutional nitrogen impurity in carbon nanotubes. Physical Review Letters, 91. p. 105502-p. 105502. ISSN 0031-9007

Owen, RA and Preston, RV and Withers, PJ and Shercliff, HR and Webster, PJ (2003) Neutron and synchrotron measurements of residual strain in TIG welded aluminium alloy 2024. Materials Science and Engineering A, 346. pp. 159-167. ISSN 0921-5093

Oyen, ML and Cook, RF (2003) Load-displacement behavior during sharp indentation of viscous-elastic-plastic materials. Journal of Materials Research, 18. pp. 139-150. ISSN 0884-2914

Oyen, ML and Ko, C (2003) Local variations in viscous-elastic-plastic nanoindentation responses of healing bone. In: UNSPECIFIED S307-S307..

Pandit, H and Mishra, A and Babu, NH and Shi, YH and He, P and Isfort, D and Chaud, X and Ferendeci, AM and Cardwell, DA and Tournier, R and Mast, D and Shi, D (2003) RF property characterization of single domain YBa2Cu3Ox. In: The MRS Symposium on New Materials and Applications: Frontiers in Superconducting Materials, -12-2003 to -- pp. 181-184..

Preston, RV and Shercliff, HR and Withers, PJ and Smith, SD (2003) Finite element modelling of tungsten inert gas welding of aluminium alloy 2024. Science and Technology of Welding and Joining, 8. pp. 10-18. ISSN 1362-1718

Qiu, X and Deshpande, VS and Fleck, NA (2003) Finite element analysis of the dynamic response of clamped sandwich beams subject to shock loading. European Journal of Mechanics - A / Solids, 22. pp. 801-814. ISSN 0997-7538

Rastogi, A and Alonso, DR and Coombs, TA and Campbell, AM (2003) Axial and journal bearings for superconducting flywheel systems. IEEE Transactions on Applied Superconductivity ASC, 13. pp. 2267-2270. ISSN 1051-8223

Rastogi, A and Ruiz Alonso, D and Campbell, AM (2003) Role of journal bearings in superconducting flywheel systems. In: Applied Superconductivity 2003 : the Sixth European Conference on Applied Superconductivity, Sorrento, Italy, 14-18 September 2003, 14-9-2003 to 18-9-2003.

Reddy, ES and Babu, NH and Shi, YH and Cardwell, DA and Schmitz, GJ (2003) Processing of single domain Y-Ba-Cu-O with pre-defined 3D interconnected porosity for bulk reinforcement. Superconductor Science and Technology, 16. L40-L43. ISSN 0953-2048

Russell, MJ and Shercliff, HR and Hyoe, T (2003) Microstructural modelling in friction stir welding of 2014-T6 aluminium alloy. In: Proceedings of the Conference of the Ecole de Mecanique des Materiaux (MECAMAT), -1-2003 to --, Aussois, France.

Sharma, SB and Sutcliffe, MPF (2003) A simplified finite element approach to draping of woven fabric. In: 6th International ESAFORM Conference on Material Forming, 28-4-2003 to 30-4-2003, Salerno, Italy pp. 887-890..

Sharma, SB and Sutcliffe, MPF and Chang, SH (2003) Characterisation of material properties for draping of dry woven composite material. COMPOS PART A-APPL S, 34. pp. 1167-1175. ISSN 1359-835X

Shercliff, HR and Ashby, MF (2003) Teach yourself phase diagrams. In: Handbook of Superconducting Materials. Institute of Physics, Bristol, UK, Chapter H3-.

Shergold, OA and Fleck, NA (2003) A mechanics model of skin penetration. In: ASME International Mechanical Engineering Congress and Exposition IMECE'03, 16-11-2003 to 21-11-2003, Washington, DC, US pp. 309-310..

Shi, QY and Dickerson, TL and Shercliff, HR (2003) Thermomechanical FE modelling of friction stir welding of Al-2024 including tool loads. In: 4th International Symposium on Friction Stir Welding, 14-5-2003 to 16-5-2003, Park City, Utah, USA.

Shieh, J and Huber, JE and Fleck, NA (2003) An evaluation of switching criteria for ferroelectrics under stress and electric field. Acta Materialia, 51. pp. 6123-6137. ISSN 1359-6454

Singleton, ACN and Baillie, CA and Beaumont, PWR and Peijs, T (2003) On the mechanical properties, deformation and fracture of a natural fibre/recycled polymer composite. Composites Part B: Engineering, 34. pp. 519-526. ISSN 1359-8368

Sirisalee, P and Parks, GT and Clarkson, PJ and Ashby, MF (2003) A new approach to multi-criteria material selection in engineering design. In: 14th International Conference on Engineering Design (ICED 03): Research for Practice: Innovation in Products, Processes and Organisations, 19-8-2003 to 21-8-2003, Stockholm, Sweden pp. 451-452..

Steuwer, A and Peel, M and Withers, PJ and Dickerson, TL and Shi, Q and Shercliff, HR (2003) Measurement and prediction of residual stresses in aluminium friction stir welds. Journal of Neutron Research, 11. pp. 267-272. ISSN 1023-8166

Sutcliffe, MPF and Combarieu, R and Repoux, M and Montmitonnet, P (2003) Tribology of plane strain compression tests on aluminium strip using ToF-SIMS analysis of transfer films. Wear, 254. pp. 65-79. ISSN 0043-1648

Sutcliffe, MPF and Sharma, SB (2003) Draping of woven fabrics progressive drape model. Plastics Rubber and Composites, 32. pp. 57-64. ISSN 1465-8011

Tagarielli, VL and Fleck, NA (2003) Transverse loading of sandwich structures. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Tagarielli, VL and Fleck, NA and Deshpande, VS (2003) The collapse response of sandwich beams with aluminium face sheets and a metal foam core in three-point bending. In: 3rd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2003), 23-6-2003 to 25-6-2003, Berlin, Germany pp. 381-386..

Tan, KT and Thompson, MG and Marinelli, C and Williams, KA and Penty, RV and White, IH and Kaiander, IN and Sellin, RL and Bimberg, D and Kang, DJ and Blamire, MG and Visinka, F and Jochum, S and Hansmann, S (2003) Investigation of high repetition rate mode-locked quantum dot lasers. In: UNSPECIFIED pp. 826-827..

Thompson, MG and Marinelli, C and Tan, KT and Williams, KA and Penty, RV and White, IH and Kaiander, IN and Sellin, RL and Bimberg, D and Kang, DJ and Blamire, MG and Visinka, F and Jochum, S and Hansmann, S (2003) 10 GHz hybrid modelocking of monolithic InGaAs quantum dot lasers. Electronics Letters, 39. pp. 1121-1122. ISSN 0013-5194

Tsaneva, VN and Nurgaliev, TC and Donchev, TI and Vickers, ME and Durrell, JH and Purnell, A and Cohen, LF and Barber, ZH (2003) Optical emission spectroscopy of the plasma during sputter deposition of YBCO films for microwave applications. In: UNSPECIFIED pp. 2769-2772..

Vanderbemden, P and Dorbolo, S and Babu, NH and Ntatsis, A and Cardwell, DA and Campbell, AM (2003) Behavior of bulk melt-textured YBCO single domains subjected to crossed magnetic fields. IEEE Transactions on Applied Superconductivity, 13. pp. 3746-3749. ISSN 1051-8223

Vanderbemden, P and Dorbolo, S and Hari-Babu, N and Ntatsis, A and Cardwell, DA and Campbell, AM (2003) Behavior of bulk melt-textured YBCO single domains subjected to crossed magnetic fields. IEEE Transactions on Applied Superconductivity, 13. pp. 3746-3749. ISSN 1051-8223

Wadley, HNG and Fleck, NA and Evans, AG (2003) Fabrication and structural performance of periodic cellular metal sandwich structures. Composites Science and Technology, 63. pp. 2331-2343. ISSN 0266-3538

Wadley, HNG and Fleck, NA and Evans, AG (2003) Fabrication and structural performance of periodic cellular metal sandwich structures. Composites Science and Technology, 63. pp. 2331-2343.

Williams, JA and Kauzlarich, JJ (2003) The influence of component geometry on the measurement of wear. In: UNSPECIFIED pp. 29-40..

Zupan, M and Chen, C and Fleck, NA (2003) The plastic collapse and energy absorption capacity of egg-box panels. International Journal of Mechanical Sciences, 45. pp. 851-871. ISSN 0020-7403

2002

Ashby, MF (2002) Material and shape. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Ashby, MF and Johnson, KW (2002) Materials and design: the art and science of material selection in product design. Butterworth-Heinemann, Oxford, UK, -.

Babu, H and Kambara, M and Shi, YH and Cardwell, DA and Tarrant, CD and Schneider, KR (2002) Processing and microstructure of single grain, uranium-doped Y-Ba-Cu-O superconductor. Superconductor Science and Technology, 15. pp. 104-110. ISSN 0953-2048

Babu, NH and Kambara, M and Cardwell, DA and Campbell, AM (2002) Effect of oxygen content variation on flux pinning in Nd-Ba-Cu-O top-seeded melt grown superconductor. Superconductor Science and Technology, 15. pp. 702-707. ISSN 0953-2048

Babu, NH and Kambara, M and Cardwell, DA and Tarrant, CD and Schneider, K (2002) Effect of the addition of depleted UO2 on the microstructure of melt processed Y-Ba-Cu-O superconductors. Physica C: Superconductivity, 372-37. pp. 1183-1186. ISSN 0921-4534

Babu, NH and Kambara, M and Shi, Y and Cardwell, DA (2002) Reply to `comment on "processing and microstructure of single grain U-doped Y-Ba-Cu-O superconductor" '. Superconductor Science and Technology, 15. pp. 1476-1477. ISSN 0953-2048

Bart Smith, H and Hutchinson, JW and Fleck, NA and Evans, AG (2002) Influence of imperfections on the performance of metal foam core sandwich panels. International Journal of Solids and Structures, 39. pp. 4999-5012. ISSN 0020-7683

Bart-Smith, H and Hutchinson, JW and Fleck, NA and Evans, AG (2002) Influence of imperfections on the performance of metal foam core sandwich panels. International Journal of Solids and Structures, 39. pp. 4999-5012. ISSN 0020-7683

Beaumont, PWR and Sekine, H (2002) Physical modelling of the engineering problems of composites and structures. In: The 5th Seminar on Experimental Techniques and Design in Composite Materials, -9-2000 to --, Cagliari, Italy pp. 255-266..

Bennett, PJ and Williams, KA and White, IH and Kang, DJ and Webster, M and Wood, SA and Haywood, ME and Phillips, AEW and Penty, RV and Blamire, MG (2002) Semiconductor laser incorporating a short two-dimensional grating.

Cardwell, DA and Babu, NH and Kambara, M and Campbell, AM (2002) Magnetic properties and critical currents of bulk MgB2 polycrystalline superconductor. Physica C: Superconductivity, 372-37. pp. 1262-1265. ISSN 0921-4534

Cardwell, DA and Bradley, AD and Babu, NH and Kambara, M and Lo, W (2002) Processing, microstructure and characterization of artificial joins in top-seeded melt grown Y-Ba-Cu-O. Superconductor Science and Technology, 15. pp. 639-647. ISSN 0953-2048

Cardwell, DA and Ginley, DS (2002) Introduction to elementary theories of superconductivity. In: Handbook of Superconducting Materials. Taylor & Francis, 141-.

Ch-A, G and Y, B and M, R and G, C and M F, A and H R, S (2002) Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys. Acta Materialia, 50. pp. 901-927. ISSN 1359-6454

Ch-A, G and Y, B and M, R and G, C and M F, A and H R, S (2002) Modelisation de la solidification et des traitements thermiques pour la prediction de la limite d'elasticite des alliages de fonderie. In: Proceedings of the Conference of the Ecole de Mecanique des Materiaux (MECAMAT), -1-2002 to --, Aussois, France.

Chen, C and Fleck, NA (2002) Size effects in the constrained deformation of metallic foams. Journal of the Mechanics and Physics of Solids, 50. pp. 955-977. ISSN 0022-5096

Chen, C and Fleck, NA and Ashby, MF (2002) Creep response of sandwich beams with a metallic foam core. Advanced Engineering Materials, 4. pp. 777-780. ISSN 1438-1656

Coombs, TA and Cansiz, A and Campbell, AM (2002) A superconducting thrust-bearing system for an energy storage flywheel. Superconductor Science and Technology, 15. pp. 831-835. ISSN 0953-2048

Coombs, TA and Tadinada, K and Weller, R and Campbell, AM (2002) Predicting the effects of inhomogeneities in resistive superconducting fault current limiters. Physica C: Superconductivity and its Applications, 372-37. pp. 1602-1605. ISSN 0921-4534

Court, RS and Tavakoli, SM and Sutcliffe, MPF (2002) Predicting adhesive joint life-times. In: 25th Annual Meeting of the Adhesion Society / 2nd World Congress on Adhesion and Related Phenomena (WCARPII), 10-2-2002 to 14-2-2002, Orlando, FL, USA.

Crotaz, CR and Shercliff, HR and Mackay, DJC (2002) Advanced statistical modelling of processing of aluminium alloys. In: 8th International Conference on Aluminium Alloys: Their Physical and Mechanical Properties (ICAA8), 2-7-2002 to 5-7-2002, Cambridge, UK pp. 643-648..

Csanyi, G (2002) Nitrogen defect in carbon nanotubes. In: 4th International Conference Nanotechnology in Carbon and Related Materials Nanote C'02, 28-8-2002 to 31-8-2002, Brighton, Sussex, UK.

Csanyi, G and Arias, TA (2002) Accurate hyperfine couplings for C59N. Chemical Physics Letters, 360. pp. 552-556. ISSN 0009-2614

Csanyi, G and Goedecker, S and Arias, TA (2002) Improved tensor-product expansions for the two-particle density matrix. Physical Review, Series A, 65. 032510-. ISSN 1050-2947

Csányi, G and Goedecker, S and Arias, TA (2002) Improved tensor-product expansions for the two-particle density matrix. Physical Review A - Atomic, Molecular, and Optical Physics, 65. 032510/1-032510/5. ISSN 1050-2947

Davey, CA and Fleck, NA and Bolton, MD (2002) The collapse behaviour of a sugar aggregate. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Deshpande, VS and Fleck, NA (2002) Energy absorption of an egg-box material. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Deshpande, VS and Needleman, A and van der Giessen, E (2002) Discrete dislocation modeling of fatigue crack growth. Acta Materialia, 50. pp. 831-846. ISSN 1359-6454

Dimant, RA and Shercliff, HR and Beaumont, PWR (2002) Evaluation of a damage-mechanics approach to the modelling of notched strength in KFRP and GRP cross-ply laminates. Composites Science and Technology, 62. pp. 255-263. ISSN 0266-3538

Eisterer, M and Zehetmayer, M and Tonies, S and Weber, HW and Kambara, M and Babu, NH and Cardwell, DA and Greenwood, LR (2002) Neutron irradiation of MgB2 bulk superconductors. Superconductor Science and Technology, 15. L9-L12. ISSN 0953-2048

Fleck, NA and Chen, C (2002) Size effects in the constrained deformation of metallic foams. Journal of the Mechanics and Physics of Solids, 50. pp. 955-977. ISSN 0022-5096

Ginley, DS and Cardwell, DA (2002) Manufacturer and supplied directory: handbook of superconducting materials. Institute of Physics Publishing, Bristol, UK, -.

Gonzalez, MT and Babu, NH and Cardwell, DA (2002) Enhancement of Jc under magnetic field by Zn doping in melt-textured Y-Ba-Cu-O superconductors. Superconductor Science and Technology, 15. pp. 1372-1376. ISSN 0953-2048

Grong, O and Shercliff, HR (2002) Microstructural modelling in metals processing. Progress in Materials Science, 47. pp. 163-282. ISSN 0079-6425

H R, L and M P F, S (2002) Evolution of surface pits on stainless steel strip in cold rolling and strip drawing. In: ASME/STLE Joint International Tribology Conference 2002, 27-10-2002 to 30-10-2002, Cancun, Mexico.

H R, L and M P F, S (2002) Measurements of friction in strip drawing under thin film lubrication. Tribology International, 35. pp. 123-128. ISSN 0301-679X

H R, L and M P F, S (2002) Rolling of thin strip and foil: application of a tribological model for "mixed" lubrication. Transactions of the ASME: Journal of Tribology, 124. pp. 129-136. ISSN 0742-4787

H R, L and M P F, S (2002) The role of lubricant entrapment in the evolution of surface pits in metal forming processes. In: The Colloquium on Friction and Wear in Metal Forming, -6-2002 to --, Valenciennes, France pp. 47-54..

Hari Babu, N and Kambara, M and Cardwell, DA and Tarrant, CD and Schneider, K (2002) Effect of addition of depleted UO2 to the microstructure of melt processed Y-Ba-Cu-O superconductors. Physica C: Superconductivity, 372-37. pp. 1183-1186. ISSN 0921-4534

Huber, JE and Shieh, J and Fleck, NA (2002) Multiaxial response of hard and soft ferroelectrics under stress and electric field. In: The SPIE International Conference on Active Materials: Behavior and Mechanics, -3-2002 to --, San Diego, CA, US pp. 133-142..

Johnson, KW and Langdon, PM and Ashby, MF (2002) Grouping materials and processes for the designer: an application for cluster analysis. Materials and Design, 23. pp. 1-10. ISSN 0928-1045

Kambara, M and Babu, NH and Cardwell, DA and Campbell, AM (2002) Joining of Nd-Ba-Cu-O superconducting oxides. Physica C: Superconductivity, 372-37. pp. 1155-1158. ISSN 0921-4534

Kambara, M and Babu, NH and Shi, Y and Cardwell, DA (2002) High temperature phase relationships in (Y,Nd)-123 superconducting oxides: the Y2BaCuO5-Nd4Ba2Cu2O10-Ba3Cu5Ox. Superconductor Science and Technology, 15. pp. 708-711. ISSN 0953-2048

Kapoor, A and Fletcher, DI and Franklin, FJ and Deters, L and Poll, G and Olver, A and Sperring, TP and Roylance, BJ and Williams, JA and Beke, AF and Wang, Y and Hadfield, M and Childs, THC and Diab, Y and Coulon, S and Ville, F and Flamand, L and Sperring, T and Ward, A and Lewis, R and Dwyer-Joyce, RS (2002) Session IX - Friction, wear and life of line contacts in machine elements (1) - Life predictions. Tribology Series, 41. pp. 881-883. ISSN 0167-8922

Kennish, YC and McGrath, GC and Shercliff, HR (2002) Heat flow model for laser welding of polymers. In: ANTEC 2002: the Society of Plastics Engineers 60th Annual Technical Conference, -5-2002 to --, San Francisco, CA, USA pp. 1132-1136..

Kennish, YC and Shercliff, HR and Mcgrath, GC (2002) Heat flow model for laser welding of polymers. In: The 60th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2002), 5-5-2002 to 9-5-2002 pp. 1132-1136..

LeBacq, C and Brechet, Y and Shercliff, HR and Jeggy, T and Salvo, L (2002) Selection of joining methods in mechanical design. Materials and Design, 23. pp. 405-416. ISSN 0261-3069

Long, AC and Gil, RG and Clifford, MJ and Harrison, P and Sharma, SB and Sutcliffe, MPF (2002) Experimental analysis of fabric deformation during forming of textile composites. In: The 5th International ESAFORM Conference on Material Forming, -4-2002 to --, Cracow, Poland pp. 279-282..

Maine, E and Ashby, MF (2002) Succeeding with new materials. A comprehensive guide for assessing market potential. Institute of Manufacturing, University of Cambridge, Cambridge, UK.

Markaki, AE and Clyne, TW (2002) Energy absorption during failure of layered metal foam/ceramic laminates. Materials Science and Engineering A: Structural Materials : Properties Microstructure and Processing, 323. pp. 260-269. ISSN 0921-5093

Markaki, AE and Westgate, SA and Clyne, TW (2002) The stiffness and weldability of an ultra-light steel sandwich sheet material with a fibrous metal core. In: Third Global Symposium on Materials Processing and Manufacturing: Processing and Properties of Lightweight Cellular Metals and Structures, 17-2-2002 to 21-2-2002, Seattle, WA, USA pp. 15-24..

Moore, DF and Williams, JA and Hopcraft, MA and Boyle, B and He, JH and Syms, RA (2002) Laser micromachining of thin films for optoelectronic devices and packages. In: The SPIE International Symposium on Laser Micromachining for Optoelectronic Device Fabrication, -10-2002 to -- pp. 140-147..

Moore, DF and Williams, JA and Hopcroft, MA and Boyle, B and He, JH and Syms, RRA (2002) Laser micromachining of thin films for optoelectronic devices and packages. Proceedings of SPIE - The International Society for Optical Engineering, 4941. pp. 140-147. ISSN 0277-786X

Needleman, A and Van der Giessen, E and Deshpande, VS (2002) Discrete dislocation modeling of fatigue crack growth in single crystals. In: UNSPECIFIED pp. 11-16..

Sato, M and Yokobori, AB and Ozawa, Y and Kamiyama, T and Miyanaga, T and Beaumont, PWR and Sekine, H (2002) Experimental study of repair efficiency for single-sided composite patches bonded to aircraft structural panels. Advanced Composite Materials, 11. pp. 51-59. ISSN 0924-3046

Seshia, AA and Howe, RT and Montague, S (2002) An integrated microelectromechanical resonant output gyroscope. In: 15th IEEE Internatioanl Conference on Micro Electro Mechanical Systems, MEMS' 02, 20-1-2002 to 24-1-2002, Las Vegas, NV, USA pp. 722-727..

Seshia, AA and Low, W and Bhave, SA and Howe, RT and Montague, S (2002) Micromechanical pierce oscillators for resonant sensing applications. In: 5th International Conference on Modeling and Simulation of Microsystems, MSM' 02, 22-4-2002 to 25-4-2002, San Juan, Puerto Rico pp. 162-165..

Seshia, AA and Palaniapan, M and Roessig, TA and Howe, RT and Gooch, R and Schimert, T and Montague, S (2002) A vacuum packaged surface micromachined resonant accelerometer. Journal of Microelectromechanical Systems, 11. pp. 784-793. ISSN 1057-7157

Sharma, SB and Sutcliffe, MPF (2002) Draping of woven fabrics: a progressive drape model. In: The 9th International Conference on Fibre Reinforced Composites, -3-2002 to --, Newcastle upon Tyne, UK pp. 337-344..

Shercliff, HR (2002) Modelling and selection of surface treatments for steels. Advanced Engineering Materials, 4. pp. 397-402. ISSN 1438-1656

Shercliff, HR and Colegrove, PA (2002) Modelling of friction stir welding. In: UNSPECIFIED pp. 927-974..

Shi, QY and Dickerson, T and Shercliff, HR (2002) Thermo-mechanical analyses of welding aluminum alloy with TIG and friction stir welding. In: 6th International Conference on Trends in Welding Research, -4-2002 to --, Pine Mountain, GA, US pp. 247-252..

Shieh, J and Fleck, NA and Huber, JE (2002) Observation of fatigue crack growth in ferroelectrics under electrical loading. In: The SPIE International Conference on Active Materials: Behavior and Mechanics, -3-2002 to --, San Diego, CA, US pp. 51-63..

Spikes, HA and Xu, H and Redlich, AC and Bartel, D and Deters, L and Williams, JA and Ville, F and Zhu, D and Evans, HP and Hooke, CJ (2002) Session XV elastohydrodynamic lubrication (2) - EHL-mixed lubrication. Tribology Series, 41. pp. 892-896. ISSN 0167-8922

Sridhar, I and Fleck, NA (2002) End compression of sandwich columns. Composites Part A: Applied Science and Manufacturing, 33. pp. 353-359. ISSN 1359-835X

Steeves, CA and Fleck, NA (2002) Minimum weight design for the strength of sandwich panels with composite face-sheets and a polymer foam core. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Stelmashenko, N and Yates, KA and Tsaneva, VN and Kambara, M and Cardwell, DA and Blamire, MG (2002) In-situ deposition of superconducting MgB2 films. In: UNSPECIFIED pp. 33-38..

Sutcliffe, MPF (2002) Surface finish and friction in cold metal rolling. In: Metal Forming Science and Practice: A State-of-The-Art Volume in Honour of Profesor J.A. Schey’s 80th Birthday. Elsevier Press. ISBN 008044024X

Sutcliffe, MPF and Combarieu, R and Repoux, M and Montmitonnet, P (2002) Characterisation of friction during plane strain compression tests on aluminium strip. In: The Colloquium on Friction and Wear in Metal Forming, -6-2002 to --, Valenciennes, France pp. 141-148..

Sutcliffe, MPF and Combarieu, R and Repoux, M and Montmitonnet, P (2002) Tribology of plane strain compression tests on aluminium strip using ToF-SIMS analysis of transfer films. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Sutcliffe, MPF and Georgiades, F (2002) Characterisation of pit geometry in cold-rolled stainless steel strip. Wear, 253. pp. 963-974. ISSN 0043-1648

Sutcliffe, MPF and Sharma, SB and Long, AC and Clifford, MJ and Gil, RG and Harrison, P and Rudd, CD (2002) A comparison of simulation approaches for forming of textile composites. In: The 5th International ESAFORM Conference on Material Forming, -4-2002 to --, Cracow, Poland pp. 311-314..

Wang, L and Wood, RJK and Harvey, TJ and Morris, S and Powrie, HEG and Care, I and Mischler, S and Childs, THC and Sugimura, J and Dahm, K and Ahlatci, H and Candan, E and Cimenoglu, H and Dearnley, PA and Hirasata, K and Hayashi, K and Matsunami, H and Kang, W and Tanaka, S and Yamamoto, Y and Williams, JA (2002) Session XVII friction, wear and life of contacts in machine elements (2)-wear. Tribology Series, 41. pp. 898-901. ISSN 0167-8922

Webster, PJ and Ananthaviravakumar, N and Hughes, DJ and Mills, D and Preston, RV and Shercliff, HR and Withers, PJ (2002) Measurement and modelling of residual stresses in a TIG weld. Applied Physics A: Materials Science and Processing, 74. S1421-S1423. ISSN 0947-8396

Weinstein, R and Sawh, R-P and Hari Babu, N and Kambara, M and Shi, Y-H and Cardwell, DA and Tarrant, CD and Schneider, KR (2002) Comment on 'processing and microstructure of single grain uranium-doped Y-Ba-Cu-O superconductor' (multiple letters). Superconductor Science and Technology, 15. pp. 1474-1477. ISSN 0953-2048

Williams, JA and Kauzlarich, JJ (2002) The influence of component geometry on the measurement of wear. In: The Friction, Lubrication and Wear of Artificial Joints. Wiley, -.

Wonfor, A and Tan, KT and Ribbatt, C and Bimberg, D and Williams, KA and Kang, DJ and Blamire, MG and Kovsh, AR and Ustinove, VM and Zhukov, AE and Penty, RV and White, IH (2002) High bandwidth modulation of multiple contact 1.3 micron quantum dot lasers. In: UNSPECIFIED.

Yassin, C and Barboy, I and Dikovsky, V and Kambara, M and Cardwell, DA and Withington, S and Jung, G (2002) Microwave transmission through high-temperature superconducting waveguides. Physica C: Superconductivity, 372-37. pp. 523-525. ISSN 0921-4534

Yassin, G and Barboy, I and Dikovsky, V and Kambara, M and Cardwell, DA and Withignton, S and Jung, G (2002) Microwave transmission through high-temperature superconducting waveguides. In: UNSPECIFIED pp. 523-525..

Zupan, M and Ashby, MF and Fleck, NA (2002) Actuator classification and selection - the development of a database. Advanced Engineering Materials, 4. pp. 933-940. ISSN 1438-1656

Zupan, M and Fleck, NA and Ashby, MF (2002) The collapse and energy absorption of egg-box panels. In: TMS Annual Meeting and Exhibition, 17-2-2002 to 21-2-2002, Seattle, WA, US pp. 243-250..

Zupan, MP and Ashby, MF and Fleck, NA (2002) Actuator classification and selection: the development of a database. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

2001

Fleck, Norman Andrew, ed. (2001) Proceedings of the International Conference on Cellular Metals and Metal Foaming Technology (MetFoam'01). MIT-Verlag, Breman, Germany.

Ahmed, R and Sutcliffe, MPF (2001) An experimental investigation of surface pit evolution during cold-rolling or drawing of stainless steel strip. Transactions of the ASME: Journal of Tribology, 123. pp. 1-7. ISSN 0742-4787

Ashby, MF and Bréchet, Y and Salvo, L (2001) Sélection des matériaux et des procédés. Traité des Matériaux, 20 . Presses Polytechniques et Universitaires Romandes.

Babu, HN and Kambara, N and McCrone, JE and Cooper, JR and Tallon, JL and Cardwell, DA (2001) Fabrication of Ca-doped large grain Y-Ba-Cu-O superconductors. IEEE Transactions on Applied Superconductivity, 11. pp. 3521-3524. ISSN 1051-8223

Babu, NH and Kambara, M and McCrone, J and Cooper, JR and Tallon, JL and Cardwell, DA (2001) Fabrication of Ca-doped large grain Y-Ba-Cu-O superconductors. In: UNSPECIFIED pp. 3521-3524..

Bauerle, D and Pedarnig, JD and Rossler, R and Stockinger, W and Lang, W and Durrell, JH and Evetts, JE (2001) Pulsed-laser deposition and characterization of high-temperature superconducting films. In: 9th International Conference on Laser-Assisted Microtechnology, -- to --, 23-25 Aug. 2000 pp. 220-227..

Berenov, A and Lockman, Z and Qi, X and Bugoslavsky, Y and Cohen, LF and Jo, M-H and Stelmashenko, NA and Tsaneva, VN and Kambara, VN and Babu, NH and Cardwell, DA and Blamire, MG and Macmanus Driscoll, JL (2001) Growth of strongly biaxially aligned MgB2 thin films on sapphire by postannealing of amorphous precursors. Applied Physics Letters, 79. pp. 4001-4003. ISSN 0003-6951

Berenov, A and Lockman, Z and Qi, X and MacManus-Driscoll, JL and Bugoslavsky, Y and Cohen, LF and Jo, MH and Stelmashenko, NA and Tsaneva, VN and Kambara, M and Babu, NH and Cardwell, DA and Blamire, MG (2001) Growth of strongly biaxially aligned MgB2 thin films on sapphire by postannealing of amorphous precursors. APPL PHYS LETT, 79. pp. 4001-4003. ISSN 0003-6951

Bradley, AD and Lo, W and Mironova, M and Babu, NH and Cardwell, DA and Campbell, AM and Salama, K (2001) Microstructure and growth of joins in melt-textured YBa2Cu3O7-δ. Journal of Materials Research, 16. pp. 2298-2305. ISSN 0884-2914

Cardwell, DA and Kambara, M and Babu, NH and Smith, PJ and Shi, Y (2001) Fabrication of large grain Nd-Ba-Cu-O by self-seeded melt growth. In: UNSPECIFIED pp. 3712-3715..

Cardwell, DA and Kambara, M and Babu, NH and Smith, PJ and Shi, Y (2001) Fabrication of large grain Nd-Ba-Cu-O by self-seeded melt growth. IEEE Transactions on Applied Superconductivity, 11. pp. 3712-3715. ISSN 1051-8223

Chen, C and Fleck, NA and Ashby, MF (2001) Numerical predictions of the creep response of sandwich beams with a metallic foam core. In: Metfoam 2001: The International Conference on Cellular Metals and Metal Foaming Technology, -6-2001 to --, Bremen, Germany pp. 369-374..

Chen, C and Fleck, NA and Lu, TJ (2001) Mode I crack growth resistance of metallic foams. Journal of the Mechanics and Physics of Solids, 49. pp. 231-259. ISSN 0022-5096

Chen, C and Fleck, NA and Lu, TJ (2001) The mode I crack growth resistance of metallic foams. Journal of the Mechanics and Physics of Solids, 49. pp. 231-259. ISSN 0022-5096

Chen, C and Harte, A-M and Fleck, NA (2001) Plastic collapse of sandwich beams with a metallic foam core. International Journal of Mechanical Sciences, 43. pp. 1483-1506. ISSN 0020-7403

Chen, C and Harte, AM and Fleck, NA (2001) The plastic collapse of sandwich beams with a metallic foam core. International Journal of Mechanical Sciences, 43. pp. 1483-1506. ISSN 0020-7403

Chen, C and Lu, TJ and Fleck, NA (2001) Effect of inclusions and holes on the stiffness and strength of honeycombs. International Journal of Mechanical Sciences, 43. pp. 487-504. ISSN 0020-7403

Choi, SH and Song, BG and Kang, KJ and Fleck, NA (2001) Fracture of a ductile layer constrained by stiff substrates. Fatigue and Fracture of Engineering Materials and Structures, 24. pp. 1-13. ISSN 8756-758X

Coombs, TA and Campbell, AM and Murphy, A and Emmens, M (2001) A fast algorithm for calculating the critical state in superconductors. Compel: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 20. pp. 240-252. ISSN 0332-1649

Court, RS and Sutcliffe, MPF and Tavakoli, SM (2001) Ageing of adhesively bonded joints-fracture and failure analysis using video imaging techniques. International Journal of Adhesion and Adhesives, 21. pp. 455-463. ISSN 0143-7496

Creighton, CJ and Sutcliffe, MPF and Clyne, TW (2001) A multiple field image analysis procedure for characterisation of fibre alignment in composites. Composites Part A: Applied Science and Manufacturing, 32. pp. 221-229. ISSN 1359-835X

Creighton, CJ and Sutcliffe, MPF and Clyne, TW (2001) A multiple field image analysis procedure for characterisation of fibre alignment in composites. COMPOS PART A-APPL S, 32. pp. 221-229. ISSN 1359-835X

Csanyi, G (2001) New ab initio formulation of electron correlation and spin resonance. PhD thesis, UNSPECIFIED.

Deshpande, VS and Ashby, MF and Fleck, NA (2001) Foam topology: bending versus stretching dominated architectures. International Journal of Solids and Structures, 49. pp. 1035-1040. ISSN 1359-6454

Deshpande, VS and Cleveringa, HHM and Van der Giessen, E and Needleman, A (2001) A discrete dislocation analysis of fatigue crack growth. Journal De Physique. IV : JP, 11. Pr569-Pr575. ISSN 1155-4339

Deshpande, VS and Cleveringa, HMM and van der Giessen, E and Needleman, A (2001) A discrete dislocation analysis of fatigue crack growth. Journal de Physique IV, 5. pp. 69-75. ISSN 1155-4339

Deshpande, VS and Fleck, NA (2001) Collapse of truss core sandwich beams in 3-point bending. International Journal of Solids and Structures, 38. pp. 6275-6305. ISSN 0020-7683

Deshpande, VS and Fleck, NA (2001) Effective properties of the octet-truss lattice material. Journal of the Mechanics and Physics of Solids, 49. pp. 1747-1769. ISSN 0022-5096

Deshpande, VS and Fleck, NA (2001) Multi-axial yield behaviour of polymer foams. Acta Materialia, 49. pp. 1859-1866. ISSN 1359-6454

Deshpande, VS and Needleman, A and van der Giessen, E (2001) Dislocation dynamics is chaotic. Scripta Materialia, 45. pp. 1047-1053. ISSN 1359-6462

Deshpande, VS and Needleman, A and van der Giessen, E (2001) A discrete dislocation analysis of crack growth. In: 10th International Conference on Fracture, ICF' 01, 2-12-2001 to 6-12-2001, Honolulu, Hawaii, USA.

Deshpande, VS and Needleman, A and van der Giessen, E (2001) A discrete dislocation analysis of near-threshold fatigue crack growth. Acta Materialia, 49. pp. 3189-3203. ISSN 1359-6454

Durrell, J (2001) Critical current anisotropy in high temperature superconductors. PhD thesis, UNSPECIFIED.

E M A, M and M F, A (2001) Viability assessment: a case study of metal foams. In: Encyclopedia of Materials: Science and Technology. Elsevier Press, Amsterdam, The Netherlands.

Evans, AG and Hutchinson, JW and Fleck, NA and Ashby, MF and Wadley, HN (2001) The topological design of multifunctional cellular metals. Progress in Materials Science, 46. pp. 209-327. ISSN 0079-6425

Feih, S and Shercliff, HR and McGrath, G (2001) Quality assesment and design guidelines for adhesively bonded peel-joint geometries in composite aerospace structures. In: 6th International Conference on Deformation and Fracture of Composites (DFC6), -4-2001 to --, UMIST, Manchester, UK.

Feih, S and Shercliff, HR and McGrath, G (2001) Simplifying finite element design verification of adhesively bonded composite joints by customising MSC/PATRAN and ABAQUS. In: Proceedings of the Conference ICCE-8, -7-2001 to --, Tenerife, Spain.

Fleck, NA (2001) Multi-axial strength of metallic foams and lattice materials. Journal of the JSMS: Materials Science for the 21st Century, A. pp. 336-340.

Fleck, NA and Chen, C and Ashby, MF (2001) Size effects in the fracture of metallic foams. In: Metfoam 2001: The International Conference on Cellular Metals and Metal Foaming Technology, -6-2001 to --, Bremen, Germany pp. 293-298..

Fleck, NA and Hutchinson, JW (2001) A reformulation of strain gradient plasticity. Journal of the Mechanics and Physics of Solids, 49. pp. 2245-2271. ISSN 0022-5096

Fleck, NA and Liu, D (2001) Microbuckle initiation from a patch of large amplitude fibre waviness in a composite under compression and bending. European Journal of Mechanics, Series A; Solids, 20. pp. 23-38. ISSN 0997-7538

Fleck, NA and Olurin, OB (2001) The effect of hole size upon the strength of metallic and polymeric foams. Journal of the Mechanics and Physics of Solids, 49. pp. 2015-2030. ISSN 0022-5096

Fleck, NA and Olurin, OB and Chen, C and Ashby, MF (2001) The effect of hole size upon the strength of metallic and polymeric foams. Journal of the Mechanics and Physics of Solids, 49. pp. 2015-2030. ISSN 0022-5096

Gandin, CA and Brechet, Y and Rappaz, M and Canova, G and Ashby, MF and Shercliff, HR (2001) Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys. In: 7th European Conference on Advanced Materials and Processes (Euromat 2001), -6-2001 to -- 259-..

H R, L and M P F, S (2001) A semi-empirical friction model for cold metal rolling. Tribology Transactions, 44. pp. 284-290. ISSN 0569-8197

Harte, AM and Fleck, NA and Ashby, MF (2001) The fatigue strength of sandwich beams with an aluminium alloy foam core. International Journal of Fatigue, 23. pp. 499-507. ISSN 0142-1123

Huber, JE and Fleck, NA (2001) Multi-axial electrical switching of a ferroelectric: theory versus experiment. Journal of the Mechanics and Physics of Solids, 49. pp. 785-811. ISSN 0022-5096

Johnson, KW and Lenau, T and Ashby, MF (2001) The aesthetic and perceived attributes of materials and products. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Kambara, M and Babu, NH and Sadki, ES and Cooper, JR and Minami, H and Cardwell, DA (2001) High temperature phase relationships in (Y,Nd)123 superconducting oxides. Physica C: Superconductivity, 357-36. pp. 649-653. ISSN 0921-4534

Kambara, M and Babu, NH and Sadki, ES and Cooper, JR and Minami, H and Cardwell, DA and Campbell, AM and Inoue, IH (2001) High intergranular critical currents in metallic MgB2 superconductor. SUPERCOND SCI TECH, 14. L5-L7. ISSN 0953-2048

Kambara, M and Babu, NH and Sadki, ES and Cooper, JR and Minami, H and Cardwell, DA and Campbell, AM and Inoue, IH (2001) High intergranular critical currents in metallic MgB~2 superconductor. Superconductor Science and Technology, 14. L5-L7. ISSN 0953-2048

Kambara, M and Babu, NH and Shi, Y and Cardwell, DA (2001) Crystal growth of melt-textured Nd-123 under 1% oxygen partial pressure atmosphere. IEEE Transactions on Applied Superconductivity, 11. pp. 3442-3445. ISSN 1051-8223

Kambara, M and Babu, NH and Shi, Y and Cardwell, DA (2001) Growth of melt-textured Nd-123 by hot seeding under reduced oxygen partial pressure. Journal of Materials Research, 16. pp. 1163-1170. ISSN 0884-2914

Kambara, M and HariBabu, N and Shi, Y and Cardwell, DA (2001) Crystal growth of melt-textured Nd-123 under 1% oxygen partial pressure atmosphere. In: UNSPECIFIED pp. 3442-3445..

Kambara, M and HariBabu, N and Shi, Y and Cardwell, DA (2001) Crystal growth of melt-textured Nd-123 under 1% oxygen partial pressure atmosphere. IEEE Transactions on Applied Superconductivity, 11. pp. 3442-3445. ISSN 1051-8223

Kauzlarich, JJ and Williams, JA (2001) Archard wear and component geometry. Proceedings of the Institution of Mechanical Engineers, J: Journal of Engineering Tribology, 215. pp. 387-403. ISSN 1350-6501

Kauzlarich, JJ and Williams, JA (2001) Archard wear and component geometry. P I MECH ENG J-J ENG, 215. pp. 387-403. ISSN 1350-6501

Kawano, K and Abell, JS and Bradley, AD and Lo, W and Cardwell, DA (2001) Magnetic field and current distributins in melt-textured YBa 2Cu 3O 7-x with an artificial grain boundary. IEEE Transactions on Applied Superconductivity, 11. pp. 3505-3508. ISSN 1051-8223

Kawano, K and Abell, JS and Bradley, AD and Lo, W and Cardwell, DA (2001) Magnetic field and current distributions in melt-textured YBa2 Cu3O7-x with an artificial grain boundary. IEEE Transactions on Applied Superconductivity, 11. p.3505-3508.

Kawano, K and Abell, JS and Bradley, AD and Lo, W and Cardwell, DA (2001) Magnetic field and current distributions in melt-textured YBa2Cu3O7-x with an artificial grain boundary. IEEE Transactions on Applied Superconductivity, 11. pp. 3505-3508. ISSN 1051-8223

Kawano, K and Abell, JS and Bradley, AD and Lo, W and Cardwell, DA (2001) Magnetic field and current distributions in melt-textured YBa2Cu3O7-x with an artificial grain boundary. In: UNSPECIFIED pp. 3505-3508..

Kawano, K and Abell, JS and Kambara, M and Babu, NH and Cardwell, DA (2001) Evidence for high intergranular current flow in a single-phase polycrystalline MgB2 superconductor. Applied Physics Letters, 79. pp. 2216-2218. ISSN 0003-6951

Kennish, YC and Shercliff, HR and Liddell, I (2001) Tensile strength and tear resistance of woven polyethylene fabric. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kennish, YC and Shercliff, HR and Liddell, I (2001) Tensile strength and tear resistance of woven polyethylene fabric. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Le, HR and Sutcliffe, MPF (2001) Rolling of thin strip and foil: Application of a tribological model for "mixed" lubrication. American Society of Mechanical Engineers, Tribology Division, TRIB. pp. 1-8.

Le, HR and Sutcliffe, MPF (2001) A robust model for rolling of thin strip and foil. INT J MECH SCI, 43. pp. 1405-1419. ISSN 0020-7403

M F, A and K W, J (2001) Classification and choice in product design. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

M P F, S and H R, L and R, A (2001) Modeling of micro-pit evolution in rolling or strip-drawing. Transactions of the ASME: Journal of Tribology, 123. pp. 791-798. ISSN 0742-4787

Markaki, AE and Clyne, TW (2001) The effect of cell wall microstructure on the deformation and fracture of aluminium-based foams. Acta Materialia, 49. pp. 1677-1686. ISSN 1359-6454

Olurin, OB and Fleck, NA and Ashby, MF (2001) Tensile and compressive failure of notched cellular foams. ADV ENG MATER, 3. pp. 55-58. ISSN 1438-1656

Olurin, OB and McCullough, KY and Fleck, NA and Ashby, MF (2001) Fatigue crack propagation in aluminium alloy foams. International Journal of Fatigue, 23. pp. 375-382. ISSN 0142-1123

Oyen Tiesma, M and Cook, RF (2001) Technique for estimating the fracture resistance of cultured neocartilage. Journal of Materials Science: Materials in Medicine, 12. pp. 327-332. ISSN 0957-4530

Oyen-Tiesma, M and Toivola, YA and Cook, RF (2001) Load-displacement behavior during sharp indentation of viscous-elastic-plastic materials. Materials Research Society Symposium - Proceedings, 649. Q1.5.1-Q1.5.6. ISSN 0272-9172

Papachristos, VD and Panagopoulos, CN and Christoffersen, LW and Markaki, AE (2001) Youngâs modulus, hardness and scratch adhesion of Ni-P-W multilayered alloy coating produced by pulse plating. Thin Solid Films, 396. pp. 173-182. ISSN 0040-6090

Peerlings, RHJ and Fleck, NA (2001) Enriched effective modelling of elastic periodic composites. In: ECCM 2001: European Conference on Computational Mechanics, 26-6-2001 to 29-6-2001, Cracow, Poland pp. 336-340..

Peerlings, RHJ and Fleck, NA (2001) Numerical analysis of strain gradient effects in periodic media. Journal de Physique IV, 11. pp. 154-160. ISSN 1155-4339

Peerlings, RHJ and Fleck, NA (2001) Numerical analysis of strain gradient effects in periodic media. In: UNSPECIFIED pp. 153-160..

Redanz, P and Fleck, NA (2001) Discrete element modelling of compaction of cylindrical powder particles. In: UNSPECIFIED pp. 293-298..

Redanz, P and Fleck, NA (2001) The compaction of a random distribution of metal cylinders by the discrete element method. Acta Materialia, 49. pp. 4325-4335. ISSN 1359-6454

Russell, MJ and Shercliff, HR and Threadgill, PL (2001) Development and application of an analytical process model for friction stir welding. In: Automotive Aluminum 2001: a Conference of the TMS Annual Meeting, -2-2001 to -- pp. 225-234..

Schmidt, I and Fleck, NA (2001) Crack growth resistance of metal foams. In: 10th International Conference on Fracture, 3-12-2001 to 7-12-2001, Honolulu, Hawaii pp. 336-340..

Schmidt, I and Fleck, NA (2001) Ductile fracture of two-dimensional cellular structures. International Journal of Fracture, 111. pp. 327-342. ISSN 0376-9429

Sharma, SB and Sutcliffe, MPF (2001) Draping of woven composites over irregular surfaces. In: 13th International Conference on Composite Materials (ICCM-13), 25-6-2001 to 29-6-2001, Beijing, China.

Sharma, SB and Sutcliffe, MPF and Cliffort, MJ and Long, AC (2001) Experimental investigation of tow deformation during draping of woven fabrics. In: The 4th International Conference on Material Forming, ESAFORM, -4-2001 to --, Liege, Belgium pp. 107-110..

Shercliff, HR and Fleck, NA (2001) Ashby Festschrift - Preface. PROG MATER SCI, 46. pp. 187-189. ISSN 0079-6425

Shercliff, HR and Lovatt, AM (2001) Selection of manufacturing processes in design and the role of process modelling. Progress in Materials Science, 46. pp. 429-459. ISSN 0079-6425

Shieh, J and Huber, JE and Fleck, NA and Ashby, MF (2001) The selection of sensors. Progress in Materials Science, 46. pp. 461-504. ISSN 0079-6425

Shu, JY and Van der Giessen, E and Fleck, NA and Needleman, A (2001) Boundary layers in constrained plastic flow: comparison of nonlocal and discrete dislocation plasticity. Journal of the Mechanics and Physics of Solids, 49. pp. 1361-1395. ISSN 0022-5096

Smith, PJ and Cardwell, DA and Babu, NH and Kambara, M and Shi, Y (2001) Self-seeded melt growth of Au-doped Nd-Ba-Cu-O. Superconductor Science and Technology, 14. pp. 624-630. ISSN 0953-2048

Smith, PJ and Cardwell, DA and Babu, NH and Kambara, M and Shi, Y-H (2001) Preparation of doped precursor powders for the fabrication of large grain high temperature superconductors. IEEE Transactions on Applied Superconductivity, 11. pp. 2850-2853. ISSN 1051-8223

Smith, PJ and Cardwell, DA and Babu, NH and Kambara, M and Shi, YH (2001) Self-seeded melt growth of Au-doped Nd-Ba-Cu-O. SUPERCOND SCI TECH, 14. pp. 624-630. ISSN 0953-2048

Smith, PJ and Cardwell, DA and Hari-Babu, N and Kambara, M and Shi, YH (2001) Preparation of doped precursor powders for the fabrication of large grain high temperature superconductors. In: UNSPECIFIED pp. 2850-2853..

Sridhar, I and Fleck, NA and Akisanya, AR (2001) Cold compaction of an array of cylindrical fibres. International Journal of Mechanical Sciences, 43. pp. 715-742. ISSN 0020-7403

Sutcliffe, MPF and Montmitonnet, P (2001) Numerical modelling of lubricated foil rolling | Un modèle de lubrification en laminage à froid. Revue de Metallurgie. Cahiers D'Informations Techniques, 98. pp. 435-442. ISSN 0035-1563

Sutcliffe, MPF and Yuwono, AH (2001) Experimental study of microbuckle initiation in a model composite system. Scripta Materialia, 45. pp. 831-837. ISSN 1359-6462

Wierzbicki, T and Doyoyo, M and Markaki, AE (2001) Redefining the concept of stress-strain curve for foams. In: The 2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001), -6-2001 to -- pp. 449-454..

Williams, JA (2001) Advances in the modelling of boundary lubrication. In: The 28th International Symposium on Symposium on tribology; Boundary and Mixed Lubrication Science and Application, -9-2001 to -- pp. 37-48..

Williams, JA (2001) Friction and wear of rotating pivots in MEMS and other small scale devices. Wear, 251. pp. 965-972. ISSN 0043-1648

Williams, JA and Hyncica, AM (2001) Mechanisms of abrasive wear in lubricated contacts. In: Hydraulic Failure Analysis: Fluids, Components and System Effects. American Soicety for Testing and Materials, pp. 13-31. ISBN 0803128835,9780803128835

Yassin, G and Jung, G and Dikovsky, V and Barboy, I and Kambara, M and Cardwell, DA and Withington, S (2001) Investigation of microwave propagation in high-temperature superconducting. IEEE Microwave and Wireless Components Letters, 11. pp. 413-415. ISSN 1531-1309

van der Giessen, E and Deshpande, VS and Cleveringa, HHM and Needleman, A (2001) Discrete dislocation plasticity and crack tip fields in single crystals. Journal of the Mechanics and Physics of Solids, 49. pp. 2133-2153. ISSN 0022-5096

2000

Cardwell, David Anthony, ed. (2000) PASREG 2005: The 2nd International Workshop on Processing and Applications of Superconducting (RE)BCO Large Grain Materials. Superconductor Science and Technology, 13 . Institute of Physics Publishing, Bristol, UK.

Ahmed, R and Sutcliffe, MPF (2000) Analysis of micro-plasto-hydrodynamic lubrication using strip drawing rig. In: UNSPECIFIED pp. 329-342..

Ahmed, R and Sutcliffe, MPF (2000) Identification of surface features on cold-rolled stainless steel strip. Wear, 244. pp. 60-70. ISSN 0043-1648

Ashby, MF (2000) Multi-objective optimisation in material design and selection. Acta Materialia, 48. pp. 359-369. ISSN 1359-6454

Ashby, MF and Evans, AG and Fleck, NA and Gibson, LJ and Hutchinson, JW and Wadley, HNG (2000) Metal Foams: A Design Guide. Butterworth-Heinemann.

Ashby, MF and Evans, AG and Fleck, NA and Hutchinson, JW and Gibson, LJ and Wadley, H (2000) Metal foams - a design guide. Butterworth-Heinemann, Oxford, UK.

Ashby, MF and Maine, EMA (2000) Design aspects of metal matrix composite usage. In: Comprehensive Composite Materials: Volume 3: Metal Matrix Composites. Elsevier Press.

Babu, H and Cardwell, DA and Lo, W and Campbell, AM (2000) Flux pinning in large NdBCO grains fabricated by seeded-melt growth. Physical Review B: Condensed Matter and Materials Physics, 61. pp. 735-740. ISSN 0163-1829

Babu, NH and Kambara, M and Cardwell, DA and Smith, PJ (2000) Fabrication of large single-grain Y-Ba-Cu-O through infiltration and seeded growth processing. Journal of Materials Research, 15. pp. 1235-1238. ISSN 0884-2914

Babu, NH and Kambara, M and Smith, PJ and Cardwell, DA and Shi, Y (2000) Fabrication of large single-grain Y-Ba-Cu-O through infiltration and seeded growth processing. J MATER RES, 15. pp. 1235-1238. ISSN 0884-2914

Babu, NH and Lo, W and Cardwell, DA (2000) Influence of undercooling and Nd4Ba2Cu2O10 content on the growth rate of large-grain bulk Nd-Ba-Cu-O superconductor. Journal of the American Ceramic Society, 83. pp. 2622-2624. ISSN 0002-7820

Babu, NH and Lo, W and Cardwell, DA and Shi, YH (2000) Fabrication and microstructure of large grain Nd-Ba-Cu-O. Superconductor Science and Technology, 13. pp. 468-472. ISSN 0953-2048

Beaumont, PWR and Shercliff, HR and Dimant, RA and Sekine, H (2000) Physical modelling of engineering problems of composites and structures. In: 9th European Conference on Composite Materials (ECCM 9), 4-6-2000 to 7-6-2000, Brighton, UK.

Blencoe, KA and Williams, JA (2000) The contact of rough surfaces carrying pressure sensitive boundary layers. Tribology Series, 38. pp. 45-56. ISSN 0167-8922

Cardwell, DA and Babu, NH and Kambara, M and Smith, PJ and Shi, Y (2000) Fabrication of large grain Nd-Ba-Cu-O by seeded melt growth. In: UNSPECIFIED pp. 2297-2300..

Cardwell, DA and Babu, NH and Kambara, M and Smith, PJ and Shi, Y (2000) Fabrication of large grain Nd-Ba-Cu-O by seeded melt growth. Physica C: Superconductivity, 341-34. pp. 2297-2300. ISSN 0921-4534

Cardwell, DA and Babu, NH and Kambara, M and Smith, PJ and Shi, Y (2000) Fabrication of large grain Nd-Ba-Cu-O by seeded melt growth. Physica C: Superconductivity and its Applications, 341-34. IV/-IV/. ISSN 0921-4534

Cardwell, DA and Babu, NH and Lo, W and Campbell, AM (2000) Processing, microstructure and irreversibility of large-grain Nd-Ba-Cu-O. Superconductor Science and Technology, 13. pp. 646-654. ISSN 0953-2048

Cebon, D and Ashby, MF (2000) Information systems for material and process selection. Advanced Materials & Processes, 157. pp. 44-54. ISSN 0882-7958

Cebon, D and Ashby, MF (2000) Material and process selection system. Engineering Designer, 26. pp. 8-13. ISSN 0013-7898

Chen, C and Fleck, NA (2000) A creep model for polymeric foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Csanyi, G (2000) New physics of the 30 degree partial dislocation in Silicon. In: EDS 2000, 24-8-2000 to --, Brighton, Great Britain.

Csanyi, G and Arias, TA (2000) Tensor product expansions for correlation in quantum many-body systems. Physical Review Series B: Condensed Matter and Materials Physics, 61. pp. 7348-7352. ISSN 1098-0121

Csanyi, G and Engeness, TD and Ismail Beigi, S and Arias, TA (2000) New physics of the 30 degree partial dislocation in silicon. Journal of Physics: Condensed Matter, 12. pp. 10029-10038. ISSN 0953-8984

Csanyi, G and Engeness, TD and Ismail-Beigi, S and Arias, TA (2000) New physics of the 30 degrees partial dislocation in silicon revealed through ab initio calculation. In: UNSPECIFIED pp. 10029-10037..

Deshpande, VS and Ashby, MF and Fleck, NA (2000) Foam topology: bending versus stretching dominated architectures. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Deshpande, VS and Cebon, D (2000) Uniaxial experiments on idealized asphalt mixes. Journal of Materials in Civil Engineering, 12. pp. 262-271. ISSN 0899-1561

Deshpande, VS and Fleck, NA (2000) High strain rate compressive behaviour of aluminium alloy foams. International Journal of Impact Engineering, 24. pp. 277-298. ISSN 0734-743X

Deshpande, VS and Fleck, NA (2000) Isotropic constitutive models for metallic foams. Journal of the Mechanics and Physics of Solids, 48. pp. 1253-1283. ISSN 0022-5096

Durrell, JH and Gibson, G and Barber, ZH and Evetts, JE and Rossler, R and Pedarnig, JD and Bauerle, D (2000) Dependence of critical current on field angle in off-c-axis grown Bi2Sr2CaCu2O8 film. Applied Physics Letters, 77. pp. 1686-1688. ISSN 0003-6951

Esawi, AMK and Ashby, MF (2000) Computer-based selection of joining processes. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Feih, S and Shercliff, HR and McGrath, G (2000) Design of composite adhesive joints. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Fleck, NA (2000) Micromechanisms of compressive failure in composites. In: The 3rd Nordic Meeting on Materials and Mechanics, 8-5-2000 to 11-5-2000, Aalborg, Denmark.

Fleck, NA and Liu, D and Shu, JY (2000) Microbuckle initiation from a hole and from the free edge of a fibre composite. INT J SOLIDS STRUCT, 37. pp. 2757-2775. ISSN 0020-7683

Fleck, NA and Zhao, LG (2000) Microbuckle tunnelling in fibre composites. Journal of the Mechanics and Physics of Solids, 48. pp. 1865-1891. ISSN 0022-5096

H R, L and M P F, S (2000) Analysis of surface roughness of cold-rolled aluminium foil. Wear, 244. pp. 71-78. ISSN 0043-1648

Harte, AM and Fleck, NA (2000) Deformation and failure mechanisms of braided composite tubes in compression and torsion. Acta Materialia, 48. pp. 1259-1271. ISSN 1359-6454

Harte, AM and Fleck, NA and Akisanya, AR (2000) Energy absorption of foam-filled circular tubes with braided composite walls. European Journal of Mechanics, Series A: Solids, 19. pp. 31-50. ISSN 0997-7538

Harte, AM and Fleck, NA and Ashby, MF (2000) Sandwich panel design using aluminum alloy foam. Journal of the Mechanics and Physics of Solids, 2. pp. 219-222. ISSN 1438-1656

Huber, JE and Fleck, NA (2000) Multiaxial models and experiments with ferroelectrics. In: The SPIE International Conference on Active Materials: Behavior and Mechanics, -3-2000 to --, Newport Beach, CA, US pp. 288-295..

Johnson, KW and Langdon, PM and Ashby, MF (2000) Grouping materials and processes for the designer: an application for cluster analysis. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Johnson, KW and Shercliff, HR and Ashby, MF (2000) Technology coupling in the design of sports equipment. In: 3rd International Sports Engineering Association Conference (ISEA 2000), 9-6-2000 to 12-6-2000, Sydney, Australia pp. 21-34..

Kambara, M and Nadendla, HB and Shi, Y and Cardwell, DA (2000) Reduction of porosity in RE1Ba2Cu3Oy pseudo crystals. Physica. C: Superconductivity, 341-34. pp. 2473-2474. ISSN 0921-4534

Kambara, M and Nadendla, HB and Shi, Y and Cardwell, DA (2000) Reduction of porosity in RE1Ba2Cu3Oy pseudo crystals. Physica C: Superconductivity and its Applications, 341-34. IV/-IV/. ISSN 0921-4534

Kitching, KJ and Cebon, D and Cole, DJ (2000) Performance of a semi-active damper for heavy vehicles. Journal of Dynamic Systems Measurement and Control, 122. pp. 498-506. ISSN 0022-0434

Kitching, KJ and Cole, DJ and Cebon, D (2000) Theoretical investigation into the use of controllable suspensions to minimize road damage. Proceedings of the Institution of Mechanical Engineers, D: Journal of Automobile Engineering, 214. pp. 13-32. ISSN 0954-4070

Latif, A and Booij, WE and Durrell, JH and Blamire, MG (2000) Real time resistometric depth monitoring in the focused ion beam. Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures, 18. pp. 761-764. ISSN 1071-1023

Lee, HR and Sutcliffe, MPF (2000) A two-wavelength model of surface flattening in cold metal rolling with mixed lubrication. Tribology Transactions, 43. pp. 595-602. ISSN 0569-8197

Lo, W and Babu, NH and Cardwell, DA and Shi, Y and Astill, DM (2000) Fabrication and characterization of large Nd-Ba-Cu-O grains prepared under low oxygen pressure. Journal of Materials Research, 15. pp. 33-39. ISSN 0884-2914

Maine, E and Ashby, MF (2000) Cost estimation and the viability of metal foams. Advanced Engineering Materials, 2. pp. 205-209. ISSN 1438-1656

Markaki, AE and Clyne, TW (2000) Characterisation of impact response of metallic foam / ceramic laminates. Materials Science and Technology, 16. pp. 785-791. ISSN 0267-0836

McCullough, KYG and Fleck, NA and Ashby, MF (2000) The stress-life fatigue behaviour of aluminium alloy foams. Fatigue and Fracture of Engineering Materials and Structures, 23. pp. 199-208. ISSN 8756-758X

Mesarovic, SD and Fleck, NA (2000) Frictionless indentation of dissimilar elastic-plastic spheres. International Journal of Solids and Structures, 37. pp. 7071-7091. ISSN 0020-7683

Olurin, OB and Ashby, MF and Fleck, NA (2000) Indentation resistance of an aluminium foam. Scripta Materialia, 43. pp. 983-989. ISSN 1359-6462

Olurin, OB and Fleck, NA and Ashby, MF (2000) Deformation and fracture of aluminium foams. Materials Science and Engineering A, 291. pp. 136-146. ISSN 0921-5093

Olurin, OB and Fleck, NA and Ashby, MF (2000) Joining of aluminium foams with fasteners and adhesives. Journal of Materials Science, 35. pp. 1079-1086. ISSN 0022-2461

Olurin, OB and Fleck, NA and Ashby, MF (2000) Joining of metal foams with fasteners. Advanced Engineering Materials, 2. pp. 521-528. ISSN 1438-1656

Oyen-Tiesma, M and Lewis, JL and Cook, RF (2000) Viscoelastic stress-relaxation of cultured neocartilage. In: UNSPECIFIED pp. 740-742..

Petras, A and Sutcliffe, MPF (2000) Indentation failure analysis of sandwich beams. Composite Structures, 50. pp. 311-318. ISSN 0263-8223

Roylance, BJ and Williams, JA and Dwyer Joyce, R (2000) Wear debris and associated wear phenomena-fundamental research and practice. Proceedings of the Institution of Mechanical Engineers, J: Journal of Engineering Tribology, 214. pp. 79-106. ISSN 1350-6501

Roylance, BJ and Williams, JA and Dwyer-Joyce, R (2000) Wear debris and associated wear phenomena - fundamental research and practice. P I MECH ENG J-J ENG, 214. pp. 79-105. ISSN 1350-6501

Schmidt, I and Fleck, NA (2000) Ductile fracture of honeycombs. In: UNSPECIFIED S497-S498..

Sekine, H and Beaumont, PWR (2000) On a simple power law for macroscopic crack propagation rate due to stress-corrosion cracking in unidirectional GFRP composites. Materials Science and Engineering A, 285. pp. 298-302. ISSN 0921-5093

Sekine, H and Beaumont, PWR (2000) Physical modelling of engineering problems of composites and structures. Applied Composite Materials, 7. pp. 13-37. ISSN 0929-189X

Sekine, H and Beaumont, PWR (2000) An experimental study of the repair efficiency of composite patches bonded to aircraft structural panels. In: 9th US-Japan Conference on Composite Materials, 3-7-2000 to 5-7-2000, Resources Development Center, Mishima, Shizuoka, Japan.

Shercliff, HR and Ashby, MF (2000) Elastic structures in design. In: Encyclopedia of Materials: Science and Technology. Elsevier Press, Amsterdam, The Netherlands.

Shercliff, HR and Lovatt, AM and Withers, PJ (2000) Material and process selection. In: Advanced Design and Technology. Longman, Chapter 7-.

Shieh, J and Huber, JE and Fleck, NA and Ashby, MF (2000) The selection of sensors. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Smith, PJ and Cardwell, DA and Babu, NH and Zhou, W and Shi, Y (2000) Properties of Y-Ba-Cu-O powder prepared by evaporative decomposition of solution for melt-processed bulk ceramics. Superconductor Science and Technology, 13. pp. 1526-1532. ISSN 0953-2048

Smith, PJ and Cardwell, DA and Babu, NH and Zhou, W and Shi, YH (2000) Properties of Y-Ba-Cu-O powder prepared by evaporative decomposition of solution for melt-processed bulk ceramics. SUPERCOND SCI TECH, 13. pp. 1526-1532. ISSN 0953-2048

Sridhar, I and Fleck, NA (2000) Yield behaviour of cold compacted composite powders. Acta Materialia, 48. pp. 3341-3352. ISSN 1359-6454

Steeves, CA and Fleck, NA (2000) Failure modes in sandwich beams with composite face-sheets and PVC foam cores. In: The International Symposium on the Mechanics of Sandwich Structures, -11-2000 to --, Orlando, FL, US pp. 21-28..

Sutcliffe, MPF and Lee, HR (2000) Measurements of surface roughness in cold metal rolling in the mixed lubrication regime. Tribology Transactions, 43. pp. 39-44. ISSN 0569-8197

Sutcliffe, MPF and Xin, XJ and Fleck, NA and Curtis, PT (2000) Composite compressive strength modeller, version 1.4. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

U G K, W and M F, A (2000) The mechanical efficiency of natural materials, and bionics: an introduction. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Wegst, UGK and Ashby, MF (2000) Environmentally-conscious materials selection and design of sports equipment. The Engineering of Sport-Research Development and Innovation. pp. 521-531. ISSN 1050-1606

Williams, JA and Dwyer Joyce, R (2000) Contact mechanics. In: A Handbook on Modern Tribology. CRC Publications, -.

Williams, JA and Hutchings, IM and Liew, WYH (2000) The influence of the environmental process conditions on the machining of aluminium alloys. In: Characteristics of Interacting Surfaces - A Key Factor in Sustainable and Economic Products. Proceedings of the 1st International Conference on Tribology in Environmental Design 2000 . Professional Engineering Publishing Ltd, Bury St. Edmunds, UK, pp. 175-184. ISBN 1860582664

Williams, JA and Hutchings, IM and Liew, WYH (2000) The influence of the environmental process conditions on the machining of aluminium alloys. In: The 1st International Conference on Tribology in Environmental Design, -9-2000 to -- pp. 175-184..

Yap, D and Cebon, D (2000) Energy confinement in imperfect periodic systems. Journal of Sound and Vibration, 232. pp. 669-694. ISSN 0022-460X

Zhao, LG and Lu, TJ and Fleck, NA (2000) Crack channelling and spalling in a plate due to thermal shock loading. Journal of the Mechanics and Physics of Solids, 48. pp. 867-897. ISSN 0022-5096

1999

Fleck, Norman Andrew, ed. (1999) Proceedings of the 1st international conference on metal foams and porous metal structures (MetFoam'99). MIT-Verlag, Breman, MIT, -.

Ahmed, R and Sutcliffe, MPF (1999) Evolution of surface finish within the roll bite during cold rolling of stainless steel. In: 3rd International Conference on Modelling of Metal Rolling Processes, 13-12-1999 to 15-12-1999, London, UK pp. 390-399..

Ashby, MF (1999) Materials selection in mechanical design. Butterworth-Heinemann, Oxford, UK.

Ashby, MF (1999) Multi-objective optimisation in material design and selection. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Ashby, MF and Humphreys, FJ and Sellars, CM and Shercliff, HR and Stowell, MJ (1999) Deformation processing of metals. PHILOS T ROY SOC A, 357. pp. 1443-1445. ISSN 1364-503X

Atkinson, PJ and Oyen Tiesma, M and DeCamp, CE and MacKenzie, CD and Haut, RC (1999) Patellar tendon augmentation after removal of its central third limits joint tissue changes. Journal of Orthopaedic Research, 17. pp. 28-36. ISSN 0736-0266

Babu, H and Lo, W and Campbell, AM and Cardwell, DA (1999) The irreversibility behavior of NdBaCuO fabricated by top-seeded melt processing. Applied Physics Letters, 75. pp. 2981-2983. ISSN 0003-6951

Babu, H and Lo, W and Cardwell, DA and Shi, Y (1999) The effect of undercooling and Nd422 phase content on the nucleation of large Nd-Ba-Cu-O grains fabricated by top-seeded melt processing. Journal of Materials Research, 14. pp. 3859-3863. ISSN 0884-2914

Babu, NH and Lo, W and Cardwell, DA and Shi, YH (1999) Fabrication and microstructure of large grain Nd-Ba-Cu-O. In: The 4th European Conference on Applied Superconductivity (EUCAS); Vol 1: Large Scale Applications, -9-1999 to -- pp. 41-46..

Beaumont, PWR and Greer Jr, JM (1999) Towards a predictive design methodology for composite laminate patches based on physical modeling of failure processes. In: The 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, -8-1998 to --, Williamsburg, VA pp. 545-554..

Blamire, MG and Teo, BS and Durrell, JH and Mathur, ND and Barber, ZH and Macmanus Driscoll, JL and Cohen, LF and Evetts, JE (1999) Strain-induced time-dependent magnetic disorder in ultra-thin La0.7Ca0.3MnO3 films. Journal of Magnetism and Magnetic Materials, 191. pp. 359-367. ISSN 0304-8853

Bradley, AD and Doyle, R and Lo, W and Campbell, AM and Cardwell, DA (1999) Large transport critical currents across boundaries in artificially joined large-grain YBCO. Superconductor Science and Technology, 12. pp. 1054-1058. ISSN 0953-2048

Bradley, AD and Doyle, RA and Charalambous, D and Lo, W and Cardwell, DA and Campbell, AM (1999) Transport properties of bulk-bicrystal grain boundaries in artificially joined large-grain YBCO. IEEE Transactions on Applied Superconductivity ASC, 9. pp. 2038-2041. ISSN 1051-8223

Bradley, AD and Doyle, RA and Charalambous, D and Lo, W and Cardwell, DA and Campbell, AM and Vanderbemden, P (1999) Transport properties of bulk-bicrystal grain boundaries in artificially joined large-grain YBCO. In: UNSPECIFIED pp. 2038-2041..

Bressan, JD and Genin, GM and Williams, JA (1999) The influence of pressure, boundary film shear strength and elasticity on the friction between a hard asperity and a deforming softer surface. In: 24th Symposium on Tribology and Interface Engineering, -9-1998 to --, Leeds-Lyon pp. 79-90..

Chen, C and Fleck, NA and Lu, TJ (1999) The mode I crack growth resistance of metallic foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Chen, C and Lu, TJ and Fleck, NA (1999) Effect of imperfections on the yielding of two-dimensional foams. Journal of the Mechanics and Physics of Solids, 47. pp. 2235-2272. ISSN 0022-5096

Chen, C and Lu, TJ and Fleck, NA (1999) Effect of inclusions and holes on the stiffness and strength of 2D cellular solids. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Court, RS and Sutcliffe, MPF and Tavakoli, SM (1999) Fracture and failure analysis of adhesively bonded joints by video imaging techniques. In: 7th International Conference on Adhesion and Adhesives, -9-1999 to --, Cambridge, UK pp. 237-242..

Deshpande, VS and Cebon, D (1999) Models for a particle reinforced non-linear viscous composite. Journal of Engineering Mechanics (ASCE), 125. pp. 255-262. ISSN 0733-9399

Deshpande, VS and Cebon, D (1999) Models of particle reinforced nonlinear-viscous composite. Journal of Engineering Mechanics (ASCE), 125. pp. 255-262. ISSN 0733-9399

Deshpande, VS and Cebon, D (1999) Steady-state constitutive relationship for idealised asphalt mixes. Mechanics of Materials, 31. pp. 271-288. ISSN 0167-6636

Deshpande, VS and Fleck, NA (1999) Multi-axial yield of aluminium alloy foams. In: The 1st International Conference on Metal Foams and Porous Metal Structures (MetFoam'99), 14-6-1999 to 16-6-1999, Bremen, Germany pp. 247-254..

Durrell, JH and Herzog, R and Berghuis, P and Bramley, AP and Tarte, EJ and Barber, ZH and Evetts, JE (1999) Determination of pinning forces on vortex lines in YBa2Cu3O7-delta. Superconductor Science &Technoloogy, 12. pp. 1090-1093. ISSN 0953-2048

Dyson, IN and Williams, JA and Kapoor, A (1999) The effect of surface hardening on the elastic shakedown of elliptical contacts. P I MECH ENG J-J ENG, 213. pp. 287-298. ISSN 1350-6501

Dyson, IN and Williams, JA and Kapoor, A (1999) The effect of surface hardening on the elastic shakedown of elliptical contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 213. pp. 287-298. ISSN 1350-6501

Esawi, AMK and Ashby, MF (1999) CPS: a software tool for selecting manufacturing processes. In: 12th International Conference in Engineering Design (ICED'99), 24-8-1999 to 26-8-1999, Munich, Germany pp. 409-412..

Esawi, AMK and Ashby, MF (1999) Cost estimation for process selection. In: 1999 ASME Design Engineering Technical Conferences (DETC'99), 12-9-1999 to 15-9-1999, Las Vegas, Nevada, USA.

Esawi, AMK and Ashby, MF (1999) Cost estimation for process selection. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Fleck, NA and Liu, D and Shu, JW (1999) Microbuckle initiation from a hole and from the free edge of a fibre composite. International Journal of Solids and Structures, 37. pp. 2757-2775. ISSN 0020-7683

Fleck, NA and Steeves, CA (1999) Z-pinned composite laminates: knockdown in compressive strength. In: The 5th International Conference on the Deformation and Fracture of Composites, -3-1999 to --, London, UK pp. 60-68..

Fortes, MA and Ashby, MF (1999) The effect of non-uniformity of the in-plane modulus of honeycombs. Acta Materialia, 47. pp. 3469-3473. ISSN 1359-6454

French, GJ and Foulds, SAL and Abell, JS and Bradley, AD and Lo, W and Doyle, RA and Cardwell, DA (1999) Magneto-optic characterisation of artificial grain boundaries in melt-textured YBCO. In: The 4th European Conference on Applied Superconductivity (EUCAS); Vol 1: Large Scale Applications, -9-1999 to -- pp. 195-198..

Furu, T and Shercliff, HR and Baxter, GJ and Sellars, CM (1999) The influence of transient deformation conditions on recrystallization during thermomechanical processing of an Al-1% Mg alloy. ACTA MATER, 47. pp. 2377-2389. ISSN 1359-6454

H R, L and M P F, S (1999) Surface finish of cold rolled aluminium foil. In: 3rd International Conference on Modelling of Metal Rolling Processes, 13-12-1999 to 15-12-1999, London, UK pp. 468-476..

Harte, A-M and Fleck, NA and Ashby, MF (1999) Sandwich panel design using aluminium alloy foam. In: The 1st International Conference on Metal Foams and Porous Metal Structures (MetFoam'99), 14-6-1999 to 16-6-1999, Bremen, Germany pp. 307-312..

Harte, AM and Fleck, NA (1999) On the mechanics of braided composites in tension. European Journal of Mechanics, Series A: Solids, 19. pp. 259-276. ISSN 0997-7538

Harte, AM and Fleck, NA and Ashby, MF (1999) Fatigue failure of an open cell and a closed cell aluminium alloy foam. Acta Materialia, 47. pp. 2511-2524. ISSN 1359-6454

Huber, JE and Fleck, NA and Landis, C and McMeeking, RM (1999) A constitutive model for ferroelectric polycrystals. Journal of the Mechanics and Physics of Solids, 47. pp. 1663-1697. ISSN 0022-5096

Huber, JE and Fleck, NA and McMeeking, RM (1999) A crystal plasticity model for ferroelectrics. In: UNSPECIFIED pp. 39-52..

Huber, JE and McMeeking, RM and Fleck, NA (1999) A crystal plasticity model for ferroelectrics. Ferroelectrics, 228. pp. 39-52. ISSN 0015-0193

Johnson, KL and Shercliff, HR and Ashby, MF (1999) Design and selection tools for sports equipment. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Johnson, KW and Shercliff, HR and Ashby, MF (1999) Design and selection tools for sports equipment. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Johnson, KW and Shercliff, HR and Ashby, MF (1999) New materials and processes in sports equipment design. In: Organisation for the Applications of Science in Sports Conference (OASIS), 13-12-1999 to --, Paris, France pp. 49-56..

Kitching, KJ and Cebon, D and Cole, DJ (1999) An experimental investigation of preview control. Vehicle System Dynamics, 32. pp. 459-478. ISSN 0042-3114

Liew, WY and Hutchings, IM and Williams, JA (1999) The interaction between tool material, environment, and process conditions in the machining of aluminum alloys. Machining Science and Technology, 3. pp. 273-286. ISSN 1091-0344

Liew, WYH and Hutchings, IM and Williams, JA (1999) The interaction between tool material, environment, and process conditions in the machining of aluminium alloys. Machining Science and Technology, 3. pp. 273-286. ISSN 1091-0344

Liu, D and Fleck, NA (1999) Scale effects in the initiation of cracking of a scarf joint. INT J FRACTURE, 95. pp. 67-88. ISSN 0376-9429

Liu, D and Fleck, NA (1999) Scale effects in the initiation of cracking of a scarf joints. International Journal of Fracture, 95. pp. 67-88. ISSN 0376-9429

Liu, D and Fleck, NA (1999) User's manual II for finite element code FLASH for fibre microbuckling. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Lo, W and Cardwell, DA and Bradley, AD and Doyle, RA and Shi, YH and Lloyd, S (1999) Development of non-weak link bulk YBCO grain boundaries for high magnetic field eegimeering applications. IEEE Transactions on Applied Superconductivity, 9. pp. 2042-2045. ISSN 1051-8223

Lo, W and Cardwell, DA and Bradley, AD and Doyle, RA and Shi, YH and Lloyd, S (1999) Development of non-weak link bulk YBCO grain boundaries for high magnetic field engineering applications. IEEE Transactions on Applied Superconductivity, 9. pp. 2042-2045. ISSN 1051-8223

Lo, W and Cardwell, DA and Shi, YH (1999) Spray dried Pt-doped NdBaCuO precursor powder for seeded peritectic processing of large superconducting grains. Materials Science and Engineering B: Solid State Materials for Advanced Technology, 65. pp. 1-10. ISSN 0921-5107

Lovatt, AM and Bassetti, D and Shercliff, HR and Brechet, Y (1999) Process and alloy selection for aluminium casting. International Journal of Cast Metals Research, 12. pp. 211-225. ISSN 1364-0461

Maine, E and Ashby, MF (1999) Cost estimation and the viability of metal foams. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Maine, EMA and Ashby, MF (1999) Cost estimation and the viability of metal foams. In: International Conference on Metal Foams and Porous Metal Structures, 14-6-1999 to 16-6-1999, Bremen, Germany pp. 63-70..

Malone, CAT and Stoddart, SKF (1999) Editorial. Antiquity, 73. pp. 1-12.

Manninen, S and Hämäläinen, K and Dixon, MAG and Cooper, MJ and Cardwell, DA and Buslaps, T (1999) Electronic properties of YBa2Cu3O7−δ and Bi2Sr2CaCu2O8 superconductors studied by Compton scattering technique. Physica C: Superconductivity, 314. pp. 19-26. ISSN 0921-4534

Markaki, AE and Clyne, TW (1999) Energy absorption during flexural failure of layered metal foam/ceramic composites. In: The 12th International Conference on Composite Materials, -- to -- -..

Markaki, AE and Clyne, TW (1999) The effect of impact velocity on deformation of layered metal foam/ceramic composites. In: The 1st International Conference on Metal Foams and Porous Metal Structures (MetFoam'99), --1999 to -- pp. 359-364..

McCullough, KYG and Fleck, NA and Ashby, MF (1999) Toughness of aluminium alloy foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

McCullough, KYG and Fleck, NA and Ashby, MF (1999) Toughness of aluminium alloy foams. Acta Materialia, 47. pp. 2331-2343. ISSN 1359-6454

McCullough, KYG and Fleck, NA and Ashby, MF (1999) Uniaxial stress-strain behaviour of aluminium alloy foams. Acta Materialia, 47. pp. 2323-2330. ISSN 1359-6454

McCullough, KYG and Fleck, NA and Ashby, MF (1999) The stress-life fatigue behaviour of aluminium alloy foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Mesarovic, SD and Fleck, NA (1999) Spherical indentation of elastic-plastic solids. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 455. pp. 2707-2728. ISSN 1364-5021

Miyamoto, R and Shercliff, HR (1999) Selection of joining processes for aluminium alloys. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Olurin, OB and Fleck, NA and Ashby, MF (1999) Fatigue of an aluminium alloy foam. In: The 1st International Conference on Metal Foams and Porous Metal Structures (MetFoam'99), 14-6-1999 to 16-6-1999, Bremen, Germany pp. 365-372..

Olurin, OB and Fleck, NA and Ashby, MF (1999) Joining of aluminium foams with fasteners. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Olurin, OB and Fleck, NA and Ashby, MF (1999) Joining of aluminium foams with fasteners and adhesives. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Petras, A and Sutcliffe, MPF (1999) Indentation resistance of sandwich beams. Composite Structures, 46. pp. 413-424. ISSN 0263-8223

Preston, RV and Smith, SD and Shercliff, HR and Withers, PJ (1999) An investigation into the residual stresses in an aluminium 2024 test weld. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 393. pp. 265-277. ISSN 0277-027X

Schmidt, I and Fleck, NA (1999) Fracture toughness of honeycombs. In: The 1st International Conference on Metal Foams and Porous Metal Structures (MetFoam'99), 14-6-1999 to 16-6-1999, Bremen, Germany pp. 387-390..

Shercliff, HR and Lovatt, AM (1999) Modelling of microstructure evolution in hot deformation. PHILOS T ROY SOC A, 357. pp. 1621-1642. ISSN 1364-503X

Shkel, AM and Horowitz, R and Seshia, AA and Park, S and Howe, RT (1999) Dynamics and control of micromachined gyroscopes. In: Proceedings of the American Control Conference, 2-6-1999 to 4-6-1999, San Diego, USA pp. 2119-2124..

Shu, JY and Fleck, NA (1999) Strain gradient crystal plasticity: size-dependent deformation of bicrystals. Journal of the Mechanics and Physics of Solids, 47. pp. 297-324. ISSN 0022-5096

Shu, JY and King, WE and Fleck, NA (1999) Finite elements for materials with strain gradient effects. Journal of the Mechanics and Physics of Solids, 44. pp. 373-392. ISSN 0029-5981

Smith, PJ and Cardwell, DA and Babu, NH and Shi, YH (1999) The effect of the addition of gold on secondary phase formation in RE-Ba-Cu-O (RE=Y, Nd). In: The 4th European Conference on Applied Superconductivity (EUCAS); Vol 1: Large Scale Applications, -9-1999 to -- pp. 75-78..

Steeves, CA and Fleck, NA (1999) In-plane properties of CFRP laminates containing through-thickness reinforcing rods (Z-pins). In: The 12th International Conference on Composite Materials (ICCM-12), 5-7-1999 to 9-7-1999, Paris, France.

Storaakers, B and Fleck, NA and McMeeking, RM (1999) The viscoplastic compaction of composite powders. Journal of the Mechanics and Physics of Solids, 47. pp. 785-816. ISSN 0022-5096

Storey, RJ and Coombs, TA and Campbell, AM and Weller, RA and Cardwell, DA (1999) Development of superconducting DC machines using bulk YBCO. In: UNSPECIFIED pp. 1253-1256..

Storey, RJ and Coombs, TA and Campbell, AM and Weller, RA and Cardwell, DA (1999) Development of superconducting DC machines using bulk YBCO. IEEE Transactions on Applied Superconductivity ASC, 9. pp. 1253-1256. ISSN 1051-8223

Sugimura, Y and Rabiei, A and Evans, AG and Harte, AM and Fleck, NA (1999) Compression fatigue of a cellular Al alloy. Materials Science and Engineering A, 269. pp. 38-48. ISSN 0921-5093

Sugimura, Y and Rabiei, A and Evans, AG and Harte, AM and Fleck, NA (1999) Compression fatigue of a cellular Al alloy. MAT SCI ENG A-STRUCT, 269. pp. 38-48. ISSN 0921-5093

Sutcliffe, MPF (1999) Flattening of random rough surfaces in metal-forming processes. Transactions of the ASME: Journal of Tribology, 121. pp. 433-440. ISSN 0742-4787

Sutcliffe, MPF and Montmitonnet, PA (1999) A coupled tribological and mechanical model for thin foil rolling in the mixed lubrication regime. In: 3rd International Conference on Modelling of Metal Rolling Processes, 13-12-1999 to 15-12-1999, London, UK pp. 187-196..

Sutcliffe, MPF and Petras, A (1999) Failure mode maps for honeycomb sandwich panels. Composite Structures, 44. pp. 237-252. ISSN 0263-8223

Vanderbemden, P and Cloots, R and Ausloos, M and Doyle, RA and Bradley, AD and Lo, W and Cardwell, DA and Campbell, AM (1999) Intragranular and intergranular superconducting properties of bulk melt-textured YBCO. In: UNSPECIFIED pp. 2308-2311..

Wegst, UGK and Ashby, MF (1999) The CIRAD-CMS woods database. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Weller, RA and Campbell, AM and Coombs, TA and Cardwell, DA and Storey, RJ and Hancox, J (1999) Computer modelling of superconducting film type fault current limiters. In: UNSPECIFIED pp. 1377-1380..

Weller, RA and Campbell, AM and Coombs, TA and Cardwell, DA and Storey, RJ and Hancox, J (1999) Computer modelling of superconducting film type fault current limiters. IEEE Transactions on Applied Superconductivity ASC, 9. pp. 1377-1380. ISSN 1051-8223

Williams, JA (1999) Wear modelling: analytical, computational and mapping: a continuum mechanics approach. In: UNSPECIFIED pp. 1-17..

Williams, JA and Dyson, IN and Kapoor, A (1999) Repeated loading, residual stresses, shakedown, and tribology. J MATER RES, 14. pp. 1548-1559. ISSN 0884-2914

Yamamoto, T and Tabata, O and Seshia, AA and Howe, RT (1999) Integrated resonant accelerometer based on rigidity change. In: 10th International Conference on Solid-State Sensors and Actuators (Transducers 99), 7-6-1999 to 11-6-1999, Sendai, Japan pp. 1538-1541..

Zhao, LG and Lu, TJ and Fleck, NA (1999) The channelling and spalling of cracks under cold shock. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

1998

Cardwell, David Anthony, ed. (1998) Proceedings of the 1st International Workshop on the processing and applications of superconducting (RE)BCO large grain materials (PASREG). Science and Engineering B: Solid State Materials for Advanced Technology, 53 . Elsevier Press, Switzerland, pp. 45-53.

Ashby, MF (1998) Checks and estimates for material properties. I. Ranges and simple correlations. Proceedings of the Royal Society of London. Series A, Mathematical and Physical and Engineering Sciences, 454. pp. 1301-1321. ISSN 1364-5021

Bassetti, D and Brechet, Y and Ashby, MF (1998) Estimates for material properties II: the method of multiple correlations. Proceedings - Royal Society of London A, 454. pp. 1323-1336. ISSN 1364-5021

Beaumont, PWR (1998) Predictive design abd certification procedures: modelling fracture stress, fatigue strength and life-time of composites and structures. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR and Spearing, SM (1998) Predictive design and modelling failure problems in fibre composites. In: The 8th EACM European Conference on Composite Materials (ECCM-8), 1-6-1998 to 4-6-1998, Naples, Italy pp. 557-564..

Blencoe, KA and Roper, GW and Williams, JA (1998) The influence of lubricant rheology and surface topography in modelling friction at concentrated contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 212. pp. 391-400. ISSN 1350-6501

Budiansky, B and Fleck, NA and Amazigo, JC (1998) On kink-band propagation in fiber composites. Journal of the Mechanics and Physics of Solids, 46. pp. 1637-1654. ISSN 0022-5096

Cardwell, DA (1998) Processing and properties of large grain (RE)BCO. Materials Science and Engineering B: Solid State Materials for Advanced Technology, 53. pp. 1-10. ISSN 0921-5107

Cardwell, DA and Lo, W (1998) Processing of (RE)BCO large grain fabricated by seeded melt growth and their properties. Research Review 1998: High Temperature Superconductivity (IRC in Superconductivity Research Review). pp. 175-186.

Chen, C and Lu, TJ and Fleck, NA (1998) Effect of imperfections on the yielding of two-dimensional foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Chow, JCL and Lettow, JS and Lo, W and Cardwell, DA (1998) SmBa2Cu3O6.5 seed fabrication for seeded peritectic solidification of YBa2Cu3O7−δ. Journal of Materials Science, 33. pp. 133-137. ISSN 0022-2461

Chow, JCL and Leung, HT and Lo, W and Cardwell, DA (1998) Analysis of the spatial distribution of Y2BaCuO5 inclusions in large-grain YBa2Cu3O7-δ. Journal of Materials Science, 33. pp. 1083-1089. ISSN 0022-2461

Chow, JCL and Leung, HT and Lo, W and Cardwell, DA (1998) Effects of Pt doping on the size distribution and uniformity of Y2BaCuO5 particles in large-grain YBCO. Superconductor Science and Technology, 11. pp. 369-374. ISSN 0953-2048

Chow, JCL and Lo, W and Leung, HT and Dewhurst, CD and Cardwell, D (1998) Processing, Y2BaCuO5 distribution and critical current density in large grain Pt-doped YBCO. Materials Science and Engineering B: Solid State Materials for Advanced Technology, 53. pp. 79-85. ISSN 0921-5107

Cooper, JR and Babic, D and Loram, JW and Lo, W and Cardwell, DA (1998) Ground state superconducting phase fluctuations as a precursor for strong critical fluctuations in high-T-c superconductors. Fizika A, 8. pp. 333-344. ISSN 1330-0008

Csanyi, G and Ismail Beigi, S and Arias, TA (1998) Paramagnetic structure for the soliton of the 30 degree partial dislocation in silicon. Physical Review Letters, 80. pp. 3984-3987. ISSN 0031-9007

Deshpande, VS and Fleck, NA (1998) High strain rate compressive behaviour of aluminium alloy foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Deshpande, VS and Fleck, NA (1998) Isotropic constitutive models for metallic foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Dewhurst, CD and Lo, W and Shi, YH and Cardwell, DA (1998) Homogeneity of superconducting properties in SmBa2Cu3O7-d seeded melt processed YBCO. Materials Science and Engineering B: Advanced Functional Solid-State Materials, 53. pp. 169-173. ISSN 0921-5107

Doyle, RA and Bradley, AD and Lo, W and Cardwell, DA and Campbell, AM (1998) High field behavior of artificially engineered boundaries in melt-processed YBa2Cu3O7−δ. Applied Physics Letters, 73. pp. 117-119. ISSN 0003-6951

Esawi, AMK and Ashby, MF (1998) Computer-based selection of manufacturing processes: methods, software and case studies. Proceedings - Institute of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 212. pp. 595-610. ISSN 0954-4054

Esawi, AMK and Ashby, MF (1998) Cost-based ranking for manufacturing process selection. In: 2nd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 98), 27-5-1998 to 29-5-1998, Compiegne, France pp. 1001-1008..

Esawi, AMK and Ashby, MF (1998) The development and use of a software tool for selecting manufacturing processes at the early stages of design. In: 3rd Biennial World Conference on Integrated Design & Process Technology (IDPT), 6-7-1998 to 9-7-1998, Berlin, Germany pp. 210-217..

Evans, AG and Hutchinson, JW and Ashby, MF (1998) Cellular metals. Current Opinion in Solid State and Material Science, 3. pp. 288-303. ISSN 1359-0286

Fleck, NA and Hutchinson, JW (1998) A discussion of strain gradient plasticity theories and application to shear bands. In: The International Symposium on Material Instabilities in Solids, -6-1997 to --, Delft, Netherlands pp. 507-520..

Harte, AM and Fleck, NA and Ashby, MF (1998) Fatigue failure of an open cell and a closed cell aluminium alloy foam. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Hwang, SC and Huber, JE and McMeeking, RM and Fleck, NA (1998) The simulation of switching in polycrystalline ferroelectric ceramics. Journal of Applied Physics, 84. pp. 1530-1540. ISSN 0021-8979

J D, J and R A, D and W, L and A D, B and Ph, V and S, F and D A, C and A M, C (1998) Supercurrent transport across grain boundaries in melt-processed bulk YBCO. Research Review 1998: High Temperature Superconductivity (IRC in Superconductivity Research Review). pp. 187-192.

Kovalev, LK and Ilyushin, KV and Larionoff, AE and Kovalev, KL and Penkin, VT and Larionoff, SA and Dew Hughes, D and McCulloch, MD and Cardwell, DA and Lo, W and Akimov, II (1998) Alternators which use HTSC wire coils and bulk YBCO materials. In: International Cryogenic Engineering Conference, ICEC' 08, 14-7-1998 to 17-7-1998, Bournemouth, England, UK pp. 379-382..

Liew, WYH and Hutchings, IM and Williams, JA (1998) Friction and lubrication effects in the machining of aluminium alloys. Tribology Letters, 5. pp. 117-122. ISSN 1023-8883

Lo, W and Babu, H and Cardwell, DA and Shi, YH and Astill, DM (1998) Preparation and properties of large grain peritectically processed Nd-Ba-Cu-O. In: The 11th International Symposium on Superconductivity, -11-1998 to -- pp. 721-724..

Lo, W and Cardwell, DA (1998) Investigation of the controlled growth of large undoped and Pt-containing YBCO pseudo-crystals. Materials Science and Engineering B: Solid State Materials for Advanced Technology, 53. pp. 45-53. ISSN 0921-5107

Lo, W and Cardwell, DA and Chow, JCL (1998) Anisotropic growth morphology and platelet formation in large grain Y-Ba-Cu-O grown by seeded peritectic solidification. Journal of Materials Research, 13. pp. 1141-1146. ISSN 0884-2914

Lo, W and Cardwell, DA and Chow, JCL and Leung, HT (1998) Experimental investigation of the Y2BaCuO5 surface free energy during peritectic solidification of YBCO. Journal of Materials Research, 13. pp. 2035-2038. ISSN 0884-2914

Lo, W and Cardwell, DA and Hunneyball, PD (1998) Growth morphology of large YBCO grains fabricated by seeded peritectic solidification I: The seeding process. Journal of Materials Research, 13. pp. 2048-2056. ISSN 0884-2914

Lovatt, AM and Shercliff, HR (1998) Manufacturing process selection in engineering design. Part 1: the role of process selection. MATER DESIGN, 19. pp. 205-215. ISSN 0261-3069

Lovatt, AM and Shercliff, HR (1998) Manufacturing process selection in engineering design. Part 2: a methodology for creating task-based process selection procedures. MATER DESIGN, 19. pp. 217-230. ISSN 0261-3069

Lu, TJ and Fleck, NA (1998) The thermal shock resistance of solids. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Lu, TJ and Fleck, NA (1998) The thermal shock resistance of solids. Acta Materialia, 46. pp. 4755-4768. ISSN 1359-6454

McCullough, KYG and Fleck, NA and Ashby, MF (1998) Uniaxial stress-strain behaviour of aluminium alloy foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Oyen Tiesma, M and Atkinson, J and Haut, RC (1998) A method for promoting regular exercise in rabbits involved in orthopaedics research. Contemporary Topics in Laboratory Animal Science, 37. pp. 77-80. ISSN 1060-0558

Panagopoulos, CN and Markaki, AE and Agathocleous, PE (1998) Excimer laser treatment of nickel-coated cast iron. Materials Science and Engineering A: Structural Materials: Properties Microstructure and Processing, 241. pp. 226-232. ISSN 0921-5093

Ph, V and A D, B and R A, D and W, L and D M, A and D A, C and A M, C (1998) Superconducting properties of natural and artificial grain boundaries in bulk melt-textured YBCO. Physica C: Superconductivity, 302. pp. 257-270. ISSN 0921-4534

Redanz, P and Fleck, NA and McMeeking, RM (1998) Failure of a porous solid from a deep notch. International Journal of Fracture, 88. pp. 187-203. ISSN 0376-9429

Sauvage, C and Lovatt, AM and Shercliff, HR (1998) Development of selection methods for steels and their heat treatments. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Sekine, H and Beaumont, PWR (1998) A physically based micromechanical theory and diagrams of macroscopic stress-corrosion cracking in GFRP laminates. In: The 8th Japan-US Conference on Composite Materials, -9-1998 to --, Baltimore; MD, USA, pp. 199-208..

Sekine, H and Beaumont, PWR (1998) A physically based micromechanical theory of macroscopic stress-corrosion cracking in aligned continuous glass-fibre-reinforced polymer laminates. Composites Science and Technology, 58. pp. 1659-1665. ISSN 0266-3538

Shercliff, HR and Jayaram, S (1998) Effects of arc welding on aluminium alloy 7108. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shu, JY and Fleck, NA (1998) The prediction of a size effect in micro-indentation. International Journal of Solids and Structures, 35. pp. 1364-1384. ISSN 0020-7683

Shu, JY and Fleck, NA (1998) The prediction of a size effect in micro-indentation. INT J SOLIDS STRUCT, 35. pp. 1363-1383. ISSN 0020-7683

Spearing, SM and Beaumont, PWR (1998) Towards a predictive design methodology based on the physical modelling of the fracture of fiber composites. Applied Composite Materials, 5. pp. 69-94. ISSN 0929-189X

Sutcliffe, MPF and Rayner, PJ (1998) Experimental measurements of load and strip profile in thin strip rolling. International Journal of Mechanical Sciences, 40. pp. 887-900. ISSN 0020-7403

Wegst, UGK and Ashby, MF (1998) Eco-criteria for materials selection. Engineering Designer, 24. pp. 8-12. ISSN 0013-7898

Wegst, UGK and Ashby, MF (1998) Environmentally-conscious design and materials selection. In: 2nd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME'98), 27-5-1998 to 29-5-1998, Compiègne, France pp. 913-920..

Wegst, UGK and Ashby, MF (1998) Mechanical efficiency and structural optimisation of natural materials. In: 4th International Congress of the Society for Technical Biology and Bionics, -6-1998 to --, Munich, Germany pp. 75-82..

Wegst, UGK and Ashby, MF (1998) The development and use of a methodology for the environmentally-conscious selection of materials. In: 3rd Biennial World Conference on Integrated Design and Process Technology (IDPT), 6-7-1998 to 9-7-1998, Berlin, Germany pp. 88-93..

Weller, RA and Campbell, AM and Coombs, TA and Cardwell, DA and Hancox, J and Storey, RJ (1998) Computer modelling of superconductive fault current limiters. Materials Science and Engineering: B Advanced Functional Solid-State Materials, 53. pp. 229-233. ISSN 0921-5107

Yao, CH and Shercliff, HR (1998) Modelling of welding of aluminium alloy 7475. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

1997

Ashby,, ed. (1997) The Material selector. Chapman and Hall, London, UK.

Akisanya, AR and Cocks, ACF and Fleck, NA (1997) The yield behaviour of metal powders. INT J MECH SCI, 39. pp. 1315-1324. ISSN 0020-7403

Akisanya, AR and Fleck, NA (1997) Interfacial cracking from the free-edge of a long bi-material strip. International Journal of Solids and Structures, 34. pp. 1645-1666. ISSN 0020-7683

Ashby, MF (1997) Design and selection composites. In: Composites: Design for Performance, 12-10-1997 to 17-10-1997, Lake Louise, Canada.

Ashby, MF (1997) Materials selection: multiple constraints and compound objectives. In: Computerization and Networking of Materials Databases: Fifth Volume. American Society for Testing and Materials, USA, pp. 45-62.

Beaumont, PWR and Dimant, RA and Shercliff, HR (1997) Modelling problems of damage and fracture of notched fibre composites. In: The 11th Internatonal Conference on Composite Materials (ICCM-XI): Vol 2: Fatigue, Fracture and Ceramic Matrix Composites, -7-1997 to --, Gold Coast, Australia pp. 342-352..

Blencoe, KA and Williams, JA (1997) Friction of sliding surfaces carrying boundary films. Wear, 203-20. pp. 722-729. ISSN 0043-1648

Blencoe, KA and Williams, JA (1997) Friction of sliding surfaces carrying boundary layers. Tribology Letters, 3. pp. 121-123. ISSN 1023-8883

Bratland, DH and Grong, O and Shercliff, HR and Myhr, OR and Tjotta, S (1997) Modelling of precipitation reactions in industrial processing. Acta Materialia, 45. pp. 1-22.

Campbell, AM and Cardwell, DA (1997) Bulk high temperature superconductors for magnet applications. Cryogenics, 37. pp. 567-575. ISSN 0011-2275

Cardwell, DA and Lo, W and Leung, H-T and Chow, JCL (1997) The effect of platinum doping on the spatial distribution of Y2BaCuO5 inclusions in large grain melt processed YBa2Cu3O7d. In: The 9th International Symposium on Superconductivity (ISS '96) (vol.2), -10-1996 to -- pp. 725-728..

Cebon, D and Ashby, MF (1997) The optimal selection of engineering entities. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Chow, JCL and Lo, W and Dewhurst, CD and Leung, HT and Cardwell, DA and Shi, YH (1997) The influence of process parameters on the growth morphology of large-grain Pt-doped YBCO fabricated by seeded peritectic solidification. Superconductor Science and Technology, 10. pp. 435-443. ISSN 0953-2048

Coombs, TA and Cardwell, DA and Campbell, AM (1997) Dynamic properties of superconducting magnetic bearings. In: UNSPECIFIED pp. 924-927..

Coombs, TA and Cardwell, DA and Campbell, AM (1997) Dynamic properties of superconducting magnetic bearings. IEEE Transactions on Applied Superconductivity, 7. pp. 924-927. ISSN 1051-8223

Coombs, TA and Cardwell, DA and Campbell, AM (1997) Dynamic properties of superconducting magnetic bearings. IEEE Transactions on Applied Superconductivity ASC, 7. pp. 924-927. ISSN 1051-8223

Cowley, KD and Beaumont, PWR (1997) Damage accumulation at notches and the fracture stress of carbon-fibre/polymer composites: Combined effects of stress and temperature (part 1). Composites Science and Technology, 57. pp. 1211-1219. ISSN 0266-3538

Cowley, KD and Beaumont, PWR (1997) Damage mechanics of composite materials at elevated temperature. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Cowley, KD and Beaumont, PWR (1997) Modelling problems of damage at notches and the fracture stress of carbon-fibre/polymer composites: Matrix, temperature and residual stress effects (part 2). Composites Science and Technology, 57. pp. 1309-1329. ISSN 0266-3538

Cowley, KD and Beaumont, PWR (1997) The interlaminar and intralaminar fracture toughness of carbon-fibre/polymer composites: The effect of temperature (part 2). Composites Science and Technology, 57. pp. 1433-1444. ISSN 0266-3538

Cowley, KD and Beaumont, PWR (1997) The measurement and prediction of residual stresses in carbon-fibre/polymer composites (part 4). Composites Science and Technology, 57. pp. 1445-1455. ISSN 0266-3538

D, C and M F, A (1997) The optimal selection of engineering entities. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Dewhurst, CD and Lo, W and Cardwell, DA (1997) Distribution of critical current density in large YBa2Cu 3O7-δ grains fabricated using seeded peritectic solidification. IEEE Transactions on Applied Superconductivity, 7. pp. 1925-1928. ISSN 1051-8223

Dewhurst, CD and Lo, W and Cardwell, DA (1997) Distribution of critical current density in large YBa2Cu3O7-delta grains fabricated using seeded peritectic solidification. In: UNSPECIFIED pp. 1925-1928..

Dewhurst, CD and Lo, W and Cardwell, DA (1997) Distribution of critical current density in large YBa2Cu3O7-δ grains fabricated using seeded peritectic solidification. IEEE Transactions on Applied Superconductivity, 7. pp. 1925-1928. ISSN 1051-8223

Dewhurst, CD and Lo, W and Shi, YH and Cardwell, DA (1997) Influence of Sm contamination on the superconducting properties of SmBa2Cu3O78 seeded melt textured YBa2Cu3O7-δ. Conference Series: Institute of Physics, 158. pp. 865-868. ISSN 0951-3248

Dimant, RA and Shercliff, HR and Beaumont, PWR (1997) The micromechanics of crack growth in fibre composites: observing and modelling the failure process. In: ICCM11 (11th Int. Conf. on Composite Materials), -- to --, Brisbane, Australia.

Durban, D and Fleck, NA (1997) Spherical cavity expansion in a Drucker-Prager solid. Transactions of the ASME: Journal of Applied Mechanics, 64. pp. 743-750. ISSN 0021-8936

Durrell, J and Hauchecorne, G and Bok, J and Bouvier, J and Boccara, AC and Contour, JP and Roger, JP (1997) Study of the birefringence by optical reflectivity in YBa2Cu3O7 and its variation with a superconducting current. In: UNSPECIFIED pp. 1025-1026..

Esawi, AMK and Ashby, MF (1997) Computer-based selection of manufacturing processes. In: 11th International Conference on Engineering Design (ICED'97), 19-8-1997 to 21-8-1997, Tampere, Finland pp. 571-574..

Esawi, AMK and Ashby, MF (1997) Computer-based selection of manufacturing processes. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Esawi, AMK and Ashby, MF (1997) Systematic process selection in mechanical design: a summary. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Fleck, NA (1997) Compressive failure of fiber composites. ADV APPL MECH, 33. pp. 43-117. ISSN 0065-2156

Fleck, NA and Hutchinson, JW (1997) Strain gradient plasticity. ADV APPL MECH, 33. pp. 295-361. ISSN 0065-2156

Fleck, NA and Storakers, B and McMeeking, RM (1997) The viscoplastic compaction of powders. In: UNSPECIFIED pp. 1-10..

Gibson, LJ and Ashby, MF (1997) Cellular solids: structure and properties. Cambridge Solid State Science Series . Cambridge University Press, Cambridge, UK.

Huber, JE and Fleck, NA and Ashby, MF (1997) The selection of mechanical actuators based on performance indices. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 453. pp. 2185-2205. ISSN 1364-5021

Huber, JE and Fleck, NA and Ashby, MF (1997) The selection of mechanical actuators based on performance indices. Proceedings - Royal Society of London A, 453. pp. 2185-2205. ISSN 1364-5021

Kapoor, A and Williams, JA (1997) The effect of interfacial shear strength on the performance of coated surfaces in repeated sliding. Transactions of the ASME: Journal of Tribology, 119. pp. 541-549. ISSN 0742-4787

Kerherve, Y and Shercliff, HR (1997) The effect of prior heat treatment on the recrystallisation of hot-worked aluminium alloy AA3104. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Lo, W and Cardwell, DA and Dewhurst, CD and Leung, HT and Chow, JCL and Shi, YH (1997) Controlled processing and properties of large Pt-doped Y-Ba-Cu-O pseudocrystals for electromagnetic applications. Journal of Materials Research, 12. pp. 2889-2900. ISSN 0884-2914

Lo, W and Leung, HT and Cardwell, DA and Chow, JCL (1997) Local dendrite development during seeded peritectic solidification of large YBa2Cu3O7-δ grains. Journal of the American Ceramic Society, 80. pp. 813-816. ISSN 0002-7820

Murphy, AM and Ashby, MF and Fleck, NA (1997) Metallography and image analysis of metallic foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Panagopoulos, CN and Markaki, AE and Hontzopoulos, E (1997) Excimer laser treatment of copper-coated mild steel. Journal of Materials Science. ISSN 0022-2461

Poole, WJ and Shercliff, HR and Castillo, T (1997) Process model for two step age hardening of 7475 aluminium alloy. MATER SCI TECH SER, 13. pp. 897-904. ISSN 0267-0836

Rowley, AT and Wroe, FCR and Vasquez Navarro, MD and Lo, W and Cardwell, DA (1997) Microwave assisted oxygenation of melt processed bulk YBCO ceramics. Journal of Materials Science, 32. pp. 4541-4547. ISSN 0022-2461

Rowley, AT and Wroe, FCR and Vasquez Navarro, MD and Lo, W and Cardwell, DA (1997) Microwave-assisted oxygenation of melt-processed bulk YBa2Cu3O7-δ ceramics. Journal of Materials Science, 32. pp. 4541-4547. ISSN 0022-2461

Russell, MJ and Shercliff, HR and Threadgill, P (1997) Development and modelling of friction stir welding. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Sekine, H and Beaumont, PWR (1997) A physically-based micromechanical theory of macroscopic stress corrosion cracking in glass fibre-polymer laminates. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR (1997) Modelling of materials and processes: a review of activity and needs in the UK in response to the Technology Foresight exercise. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Amariglio, L and Reynolds, AD (1997) Toughness testing of aluminium alloys AA6082 and friction stir welded AA7108. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shu, JY and Fleck, NA (1997) Microbuckle initiation in fibre composites under multiaxial loading. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 453. pp. 2063-2083. ISSN 1364-5021

Siegmund, T and Fleck, NA and Needleman, A (1997) Dynamic crack growth across an interface. International Journal of Fracture, 85. pp. 381-402. ISSN 0376-9429

Sivashanker, S and Fleck, NA and Sutcliffe, MPF (1997) Microbuckle propagation in fibre composites. Acta Materialia, 45. pp. 921-932. ISSN 1359-6454

Spearing, SM and Beaumont, PWR (1997) A predictive design methodology: the physical modelling of the fracture of fiber composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Sridhar, I and Johnson, KL and Fleck, NA (1997) Adhesion mechanics of the surface force apparatus. Journal of Physics D: Applied Physics, 30. pp. 1710-1719. ISSN 0022-3727

Sutcliffe, MPF and Fleck, NA (1997) Microbuckle propagation in fibre composites. Acta Materialia, 45. pp. 921-932. ISSN 1359-6454

Sutcliffe, MPF and Fleck, NA and Xin, XJ (1997) Prediction of compressive toughness for fibre composites (vol 452, pg 2443, 1996). P ROY SOC LOND A MAT, 453. pp. 1119-1120. ISSN 1364-5021

Wakabayashi, T and Williams, JA and Hutchings, IM (1997) Fundamental studies of the action of gaseous lubricants for safe machining in space environments. In: International Conference on Reliability and Safety Engineering, --1997 to --, Kagawa.

Weaver, PM and Ashby, MF (1997) Material limits for shape efficiency. Progress in Materials Science, 41. pp. 61-128. ISSN 0079-6425

Weaver, PM and Ashby, MF (1997) An overview of material limits for shape efficiency. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Wegst, UGK and Ashby, MF (1997) Material selection charts for natural materials. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Wegst, UGK and Ashby, MF (1997) A database of the engineering properties of woods and its application. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Williams, JA (1997) 24th Leeds-Lyon Symposium on Tribology - 4-6 September 1997. TRIBOL INT, 30. p. 897. ISSN 0301-679X

Williams, JA (1997) Laboratory simulation of abrasive wear. Tribotest, 3. pp. 267-306. ISSN 1354-4063

Williams, JA and Blencoe, KA (1997) Friction of sliding surfaces carrying boundary layers: the relation between friction on the micro- and macro-scales. In: Mirco and Nano-Tribology and its Applications. NATO Science Series E . Springer, pp. 391-399. ISBN 0792343867,9780792343868

Williams, JA and Morris, JH and Ball, A (1997) The effect of transfer layers on the surface contact and wear of carbon-graphite materials. Tribology International, 30. pp. 663-676. ISSN 0301-679X

Wong, SK and Kapoor, A and Williams, JA (1997) Shakedown limits on coated and engineered surfaces. In: UNSPECIFIED pp. 162-170..

Wong, SK and Kapoor, A and Williams, JA (1997) Shakedown limits on coated surfaces. Thin Solid Films, 292. pp. 156-163. ISSN 0040-6090

Wong, SK and Kapoor, A and Williams, JA (1997) Shakedown limits on coated surfaces. THIN SOLID FILMS, 292. pp. 156-163. ISSN 0040-6090

Zeisberger, M and Campbell, AM and Lo, W and Cardwell, DA (1997) Characterization of YBCO Bulk samples by local AC-susceptometry. IEEE Transactions on Applied Superconductivity, 7. pp. 1065-1068. ISSN 1051-8223

Zeisberger, M and Campbell, AM and Lo, W and Cardwell, DA (1997) Characterization of YBCO bulk samples by local AC-susceptometry. In: UNSPECIFIED pp. 1065-1068..

Zeisberger, M and Campbell, AM and Lo, W and Cardwell, DA (1997) Characterisation of YBCO bulk samples by local AC-susceptometry. IEEE Transactions on Applied Superconductivity, 7. pp. 1065-1068. ISSN 1051-8223

Zhu, Q and Shercliff, HR and Sellars, CM (1997) Modelling hot deformation behaviour based on evolution of dislocation substructures. In: UNSPECIFIED pp. 2039-2045..

1996

Ashby, MF (1996) Checks and estimates for material properties. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Ashby, MF (1996) Materials selection: multiple constraints and compound objectives. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Ashby, MF (1996) Modelling of materials problems. Journal of Computer Aided Materials Design, 3. pp. 95-99. ISSN 0928-1045

Ashby, MF and Brechet, Y and Dupeaux, M and Luchet, F (1996) Choix et usage des matériaux. Techniques de l'ingenieur, T5100. pp. 1-23.

Ashby, MF and Cebon, D (1996) Case studies in materials selection. Elsevier Science and Technology. ISBN 0750636041

Ashby, MF and Jones, DRH (1996) Engineering materials 1: an introduction to their properties and applications. Butterworth-Heineman, Oxford, UK.

Bassetti, D and Brechet, Y and Ashby, MF (1996) Estimates for material properties: the method multiple correlations. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Beaumont, PWR (1996) Opportunities for innovation in design: the way forward. Applied Composite Materials, 3. pp. 1-2. ISSN 0929-189X

Bolton, MD and McKinley, J (1996) Clastic mechanics. In: IUTAM Symposium on Mechanics of Granular and Porous Materials, 15-7-1996 to 17-7-1996, Cambridge, UK pp. 35-46..

Brechet, Y and Ashby, MF and Dupeaux, M and Louchet, F (1996) La sélection des matériaux et des procédés. Matériaux et Techniques, 84. pp. 26-30. ISSN 0032-6895

Burgess, SC and Ashby, MF and Weaver, PM and Shibaike, N (1996) Green design case study - fridge shelf. In: 2nd International Workshop on Collaborative Design, -1-1996 to --, Tokyo, Japan.

Cebon, D and Ashby, MF (1996) Database user's manuals for CMS 2.0: Polymers vI.0 (1994), Light Alloys vI.0 (1994), Metal Matrix Composites vI.0 (1994), Copper Alloys vI.0 (1994), Conductors1.0 (1995), Foams v1.0 (1996), Ferrous Metals v1.0 (1996).

Coombs, TA and Campbell, AM and Cardwell, DA (1996) The development of an active superconducting magnetic bearing. In: 9th International Symposium on Superconductivity, 21-10-1996 to 24-10-1996, Sapporo, Japan -..

Cowley, KD and Beaumont, PWR (1996) Fracture and damage mechanics of composite materials at elevated temperature: Vol. 1. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Cowley, KD and Beaumont, PWR (1996) Fracture and damage mechanics of composite materials at elevated temperature: Vol. 2. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Csanyi, G and Kertesz, J (1996) Scaling behaviour in discrete traffic models (vol 28, pg L427, 1995). J PHYS A-MATH GEN, 29. p. 471. ISSN 0305-4470

Deshpande, VS and Cebon, D (1996) Plane strain deformation of a regular array of hexagonal particles with a bitumen binder. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Dewhurst, CD and Cardwell, DA and Campbell, AM and Doyle, RA and Balakrishnan, G and Paul, D (1996) Determination of the onset of bulk pinning and the low-temperature-irreversibility line in Bi2Sr2CaCu2O8+δ. Physical Review: B, 53. pp. 14594-14600. ISSN 0163-1829

Duly, D and Baxter, GJ and Shercliff, HR and Whiteman, JA and Sellars, CM and Ashby, MF (1996) Microstructure and local crystallographic evolution in an Al-1 wt% Mg alloy deformed at intermediate temperature and high strain-rate. ACTA MATER, 44. pp. 2947-2962. ISSN 1359-6454

Esawi, AMK and Ashby, MF (1996) Systematic process selection in mechanical design. In: 1996 ASME Design Engineering Technical Conferences (DETC'96), 18-8-1996 to 22-8-1996, Irvine, California, USA p.240-..

Fleck, NA and Kang, KJ and Williams, JA (1996) The machining of sintered bronze. International Journal of Mechanical Sciences, 38. pp. 141-155. ISSN 0020-7403

Fleck, NA and Storakers, B and McMeeking, RM (1996) Proceedings of the IUTAM Symposium on Mechanics of Granular and Porous Materials. In: The International Symposium on the Microstructure-Property Interactions in Composite Materials, -7-1996 to --, Cambridge, UK pp. 1-10..

Fleck, NA and Sutcliffe, MPF (1996) Compressive R-curve of a carbon fibre-epoxy matrix composite. Composites Part B: Engineering, 27. pp. 531-542. ISSN 1359-8368

Fleck, NA and Sutcliffe, MPF and Sivashankar, S and Xin, XJ (1996) Compressive R-curve of a carbon fibre-epoxy matrix composite. Composites Part B: Engineering, 27. pp. 531-542. ISSN 1359-8368

Furu, T and Shercliff, HR and Sellars, CM and Ashby, MF (1996) Physically-based modelling of strength, microstructure and recrystallisation during thermomechanical processing of Al-Mg alloys. In: UNSPECIFIED pp. 453-458..

Kang, KJ and Fleck, NA (1996) Analysis of the machining process of sintered bronze. KSME J, 10. pp. 314-320. ISSN 1011-8861

Kapoor, A and Johnson, KL and Williams, JA (1996) A model for the mild ratchetting wear of metals. Wear, 200. pp. 38-44. ISSN 0043-1648

Kapoor, A and Williams, JA (1996) Shakedown limits in rolling-sliding point contacts on an anisotropic halfspace. Wear, 191. pp. 256-260. ISSN 0043-1648

Lo, W and Cardwell, DA and Dewhurst, CD and Dung, SL (1996) Fabrication of large grain YBCO by seeded peritectic solidification. Journal of Materials Research, 11. pp. 786-794. ISSN 0884-2914

Lo, W and Cardwell, DA and Dung, SL and Barter, RG (1996) Preparation and properties of precursor powder for melt processed bulk YBCO by spray drying. Journal of Materials Research, 11. pp. 39-49. ISSN 0884-2914

Lo, W and Cardwell, DA and Dung, SL and Barter, RG (1996) Preparation and properties of spray dried precursor powder for melt-processed bulk YBCO ceramics. Journal of Materials Research, 11. pp. 39-49. ISSN 0884-2914

Lo, W and Leung, H-T and Cardwell, DA and Chow, JCL (1996) Review of "Applied superconductivity". Materials World, 4. 714-. ISSN 0967-8638

Lo, W and Leung, HT and Cardwell, DA and Chow, JCL (1996) Etching of melt-processed YBa2Cu3O7−δ for SEM image analysis. Journal of Materials Science Letters, 15. pp. 1833-1835. ISSN 0261-8028

Lovatt, A and Shercliff, HR (1996) Process selection in engineering design: a task level approach. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

McKelvey, AL and Cebon, D and Collop, AC and Ashby, MF (1996) An investigation of fracture of bituminous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Myhr, OR and Shercliff, HR and Furu, T (1996) The effect of hot deformation on the ageing response and notched strength of aluminium alloy AA6082. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Myhr, OR and Shercliff, HR and Furu, T (1996) The influence of hot-working and ageing on notched-strength and ductility of aluminium alloy AA6082. In: UNSPECIFIED pp. 1221-1226..

Poole, WJ and Ashby, MF and Fleck, NA (1996) Micro-hardness of annealed and work-hardened copper polycrystals. SCRIPTA MATER, 34. pp. 559-564. ISSN 1359-6462

Poole, WJ and Shercliff, HR (1996) The effect of deformation prior to artificial ageing on the ageing characteristics of a 7475 aluminum alloy. In: UNSPECIFIED pp. 1287-1292..

Shaw, MC and Clyne, TW and Cocks, ACF and Fleck, NA and Pateras, SK (1996) Cracking patterns in metal-ceramic laminates: effects of plasticity. Journal of the Mechanics and Physics of Solids, 44. pp. 801-822. ISSN 0022-5096

Shaw, MC and Clyne, TW and Cocks, ACF and Fleck, NA and Pateras, SK (1996) Cracking patterns in metal-ceramic laminates: Effects of plasticity. In: UNSPECIFIED 801-&..

Shu, JY and Fleck, NA and King, WE (1996) Bicrystals with strain gradient effects. In: The MRS International Symposium on Interfacial Engineering for Optimized Properties, -12-1996 to --, Boston, MA, US pp. 295-300..

Sivashanker, S and Fleck, NA and Sutcliffe, MPF (1996) Microbuckle propagation in a unidirectional carbon fibre-epoxy matrix composite. Acta Materialia, 44. pp. 2581-2590. ISSN 1359-6454

Slaughter, WS and Fan, J and Fleck, NA (1996) Dynamic compressive failure of fiber composites. Journal of the Mechanics and Physics of Solids, 44. pp. 1867-1890. ISSN 0022-5096

Smyshlyaev, VP and Fleck, NA (1996) The role of strain gradients in the grain size effect for polycrystals. Journal of the Mechanics and Physics of Solids, 44. pp. 465-495. ISSN 0022-5096

Sutcliffe, MPF and Fleck, NA and Xin, XJ (1996) Prediction of compressive toughness for fibre composites. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 452. pp. 2443-2465. ISSN 1364-5021

Sutcliffe, MPF and Fleck, NA and Xin, XJ (1996) Prediction of compressive toughness for fibre composites. Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 452. pp. 2443-2465. ISSN 1364-5021

Tabary, PE and Sutcliffe, MPF and Porral, F and Deneuville, P (1996) Measurements of friction in cold metal rolling. Transactions of the ASME: Journal of Tribology, 118. pp. 629-636. ISSN 0742-4787

W, L and C D, D and D A, C and Ph, V and R A, D (1996) Growth features and intergranular connectivity of melt processed YBCO. Applied Superconductivity, 4. pp. 507-517. ISSN 0964-1807

Waterman, NA and Ashby, MF (1996) The materials selector. Chapman and Hall, London, UK, -.

Weaver, PM and Ashby, MF (1996) Material limits for shape efficiency. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Weaver, PM and Ashby, MF and Burgess, SC and Shibaike, N (1996) Selection of materials to reduce environmental impact: a case study on refrigerator insulation. Materials and Design, 17. pp. 11-18. ISSN 0261-3069

Weaver, PM and Ashby, MF and Burgess, SC and Shibaike, N (1996) A case study on refrigerator insulation. Materials and Design, 17. pp. 11-17. ISSN 0261-3069

Wegst, UGK and Ashby, MF (1996) Alternative woods for violin bows. Newsletter of the British Violin Making Association. pp. 7-14. ISSN 1365-1595

Wegst, UGK and Ashby, MF (1996) Materials selection for sports equipment. In: 1st International Conference on the Engineering of Sport, 2-7-1996 to 4-7-1996, Sheffield, UK pp. 175-184..

Williams, JA (1996) Analytical models of scratch hardness. Tribology International, 29. pp. 675-694. ISSN 0301-679X

Williams, JA (1996) Wear by solid particles in lubricated contacts. In: Solid-Solid Interactions: Proceedings of the First Royal Society-Unilever Indo-UK Forum in Materials Science and Engineering. Imperial College Press, London, UK.

Williams, JA and Xie, Y (1996) Friction of sliding surfaces carrying adsorbed lubricant layers. Tribology Series, 31. pp. 651-664. ISSN 0167-8922

Xie, Y and Williams, JA (1996) The prediction of friction and wear when a soft surface slides against a harder rough surface. Wear, 196. pp. 21-34. ISSN 0043-1648

Yan, Y and Cardwell, DA and Campbell, AM and Stobbs, WM (1996) A transmission electron microscopy study of the crystallinity and secondary phase formation in melt processed YBa2Cu3O7-δ. Journal of Materials Research, 11. pp. 2990-2999. ISSN 0884-2914

1995

Ashby, MF (1995) Materials selection: multiple constraints and objectives. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Ashby, MF (1995) Materials, bicycles and design (The 1994 Edward DeMille Campbell Memorial Lecture). Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 26. pp. 3057-3064. ISSN 1073-5623

Ashby, MF and Abel, CA (1995) Materials selection to resist creep. Philosophical Transactions - Royal Society London Series A Physcial Sciences and Engineering, 351. pp. 451-468. ISSN 0962-8428

Ashby, MF and Cebon, D (1995) Materials selection for aerospace design. In: 'Aerotech 95' Aircraft Structures and Materials, -- to --, Birmingham, UK pp. 55-70..

Ashby, MF and Cebon, D and Shibaike, N (1995) Micromechanisms: materials and processes. In: Proceedings of the 1st International Workshop on Collaborative Design, --1995 to --, Tokyo, Japan.

Ashby, MF and Gibson, LJ and Wegst, U and Olive, R (1995) The mechanical properties of natural materials, I: material property charts. Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 450. pp. 123-140. ISSN 0962-8444

COOMBS, TA and CAMPBELL, AM and CARDWELL, DA (1995) DEVELOPMENT OF AN ACTIVE SUPERCONDUCTING MAGNETIC BEARING. In: UNSPECIFIED pp. 630-633..

Cardwell, DA (1995) HTS materials - requirements for magnets. IEE Colloquium Digest, 233. 1-. ISSN 0963-3308

Cardwell, DA (1995) Surface impedance of YBa2Cu3O78 thin films on LaAlO3 and NdGaO3 substrates deposited by MOCVD. Conference Series: Institute of Physics, 148. pp. 1043-1046. ISSN 0951-3248

Cardwell, DA and Campbell, AM (1995) The design of electrical machines using high temperature superconductors. IEE Colloquium Digest, 234. 2/1-2/5. ISSN 0963-3308

Cardwell, DA and Lo, W and Thorpe, HDE and Roberts, A (1995) A controllable temperature gradient furnace for the fabrication of large grain YBCO ceramics. Journal of Materials Science Letters, 14. 1444-. ISSN 0261-8028

Cardwell, DA and Weaver, G (1995) I.R.T.V. by the pyroelectric effect: materials selection and deployment. In: Case Studies in Manufacturing with Advanced Materials. Elsevier Press, pp. 99-136.

Clarke, AR and Archenhold, G and Davidson, N and Slaughter, WS and Fleck, NA (1995) Determining the power spectral density of the waviness of unidirectional glass fibres in polymer composites. Applied Composite Materials, 2. pp. 233-243. ISSN 0929-189X

Coombs, TA and Campbell, AM and Cardwell, DA (1995) Development of an active superconducting magnetic bearing. IEEE Transactions on Applied Superconductivity, 5. pp. 630-633. ISSN 1051-8223

Cowley, KD and Beaumont, PWR (1995) The micro-mechanics of crack growth in fiber composites: observing and modelling the failure processes. In: The 10th International Conference on Composite Materials (ICCM X): Vol. 1: Fatigue and Fracture, -8-1995 to --, Whistler; Canada pp. 787-801..

Csanyi, G and Kertesz, J (1995) Scaling behaviour in discrete traffic models. Journal of Physics -London- a Mathematical and General, 28. L427-L432. ISSN 0305-4470

DEWHURST, CD and CARDWELL, DA and ALFORD, NM (1995) INVESTIGATION OF THE TEMPERATURE-DEPENDENCE OF THE CRITICAL-STATE IN MELT-PROCESSED YBA2CU3O7-DELTA THICK-FILMS. J APPL PHYS, 77. pp. 2607-2612. ISSN 0021-8979

Dewhurst, CD and Cardwell, DA and Alford, N (1995) Investigation of the temperature dependence of the critical state in melt processed YBa2Cu3O7−∂ thick films. Journal of Applied Physics, 77. pp. 2067-2073. ISSN 0021-8979

Dewhurst, CD and Doyle, RA and Cardwell, DA (1995) 'Arrowhead' magnetisation anomaly, hysteresis loop scaling properties and the irreversibility line in Bi2Sr2CaCu2O8+8. Journal of Physics: Conference Series, 148. pp. 291-294. ISSN 0951-3248

Esawi, AMK and Ashby, MF (1995) Cost estimation techniques for the early stages of design. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Esawi, AMK and Ashby, MF (1995) Selection of manufacturing processes. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Fleck, NA (1995) On the cold compaction of powders. Journal of the Mechanics and Physics of Solids, 43. pp. 1409-1431. ISSN 0022-5096

Fleck, NA (1995) A crystal plasticity view of powder compaction. Acta Metallurgica et Materialia, 43. pp. 3177-3184. ISSN 0956-7151

Fleck, NA and Curtis, PT (1995) Development of a design package for compressive failure of polymer composites. Technical Report. Defence Research Agency (DRA), Farnborough, UK.

Fleck, NA and Deng, L and Budiansky, B (1995) Prediction of kink width in compressed fiber composites. Transactions of the ASME: Journal of Applied Mechanics, 62. pp. 329-337. ISSN 0021-8936

Fleck, NA and Jelf, M and Curtis, PT (1995) Compressive failure of laminated and woven composites. Journal of Composites Technology and Research, 17. pp. 212-220. ISSN 0884-6804

Fleck, NA and Jelf, PM (1995) Deformation and failure of a carbon fibre composite under combined shear and transverse loading. Acta Metallurgica et Materialia, 43. pp. 3001-3007. ISSN 0956-7151

Fleck, NA and Shu, JY (1995) Microbuckle initiation in fibre composites: a finite element study. Journal of the Mechanics and Physics of Solids, 43. pp. 1887-1918. ISSN 0022-5096

Gibson, LJ and Ashby, MF and Karam, GN and Wegst, UGK and Shercliff, HR (1995) The mechanical properties of natural materials, II. Microstructures for mechanical efficiency. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 450. pp. 141-162. ISSN 1364-5021

Ingle, NJC and Cardwell, DA and Jones, AR and Wellhofer, F (1995) The effect of thickness on the magnetic properties of melt-processed YBCO thick films. Semiconductor Science and Technology, 8. pp. 282-290. ISSN 0953-2048

Ingle, NJC and Cardwell, DA and Jones, AR and Wellhofer, F and Button, TW (1995) The effect of thickness on the magnetic properties of melt-processed YBCO thick films. Superconductor Science and Technology, 8. pp. 282-290. ISSN 0953-2048

JONES, AR and BAKER, AP and DEWHURST, CD and ASHWORTH, SP and CARDWELL, DA and CAMPBELL, AM (1995) INVESTIGATION OF CURRENT FLOW IN HIGH-TEMPERATURE SUPERCONDUCTING THICK-FILMS. In: UNSPECIFIED pp. 47-53..

Jiang, XH and Astill, DM and Lo, W and Cardwell, DA (1995) Experimental analysis of the magnetic field shielding and trapping properties of bulk melt-processed YBa2Cu3O7−δ. Physica C: Superconductivity, 249. pp. 171-180. ISSN 0921-4534

KAUTE, DAW and SHERCLIFF, HR and ASHBY, MF (1995) MODELING OF FIBER BRIDGING AND TOUGHNESS OF CERAMIC-MATRIX COMPOSITES. SCRIPTA METALL MATER, 32. pp. 1055-1060. ISSN 0956-716X

Lo, W and Cardwell, DA (1995) The growth of large grain YBCO by seeded peritectic solidification. Journal of Physics: Conference Series, 148. pp. 139-142. ISSN 0951-3248

Lo, W and Cardwell, DA and Dung, S-L and Barter, RG (1995) Chemically prepared precursor powder for the fabrication of melt processed YBCO. IEEE Transactions on Applied Superconductivity, 5. 1619-. ISSN 1051-8223

Lo, W and Cardwell, DA and Dung, SL and Barter, RG (1995) Processing of bulk YBa2Cu3O7−δ ceramics prior to peritectic solidification. Journal of Materials Science, 30. pp. 3995-4002. ISSN 0022-2461

OGBONNA, N and FLECK, NA (1995) COMPACTION OF AN ARRAY OF SPHERICAL-PARTICLES. ACTA METALL MATER, 43. pp. 603-620. ISSN 0956-7151

Ogbonna, N and Fleck, NA and Cocks, ACF (1995) Transient creep analysis of ball indentation. Journal of Materials Science, 37. pp. 1179-1202. ISSN 0020-7403

Poole, WJ and Shercliff, HR and Boyd, MTB (1995) The effect of cold deformation after quenching on the ageing of 7475 aluminium alloy. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shu, JY and Fleck, NA (1995) User's manual for finite element code for fibre microbuckling. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Wakabayashi, T and Williams, JA and Hutchings, IM (1995) The kinetics of gas-phase lubrication in the orthogonal machining of an aluminium alloy. Proceedings of the Institution of Mechanical Engineers, pt J: Journal of Engineering Tribology, 209. pp. 131-136. ISSN 1350-6501

Weaver, PM and Ashby, MF (1995) The optimal selection of material and shape. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Xin, XJ and Sutcliffe, MPF and Fleck, NA and Curtis, PT (1995) Cambridge Composite Designer: a users' manual. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

1994

A R, J and D A, C and N J C, I and S P, A and A M, C and N McM, A and T W, B and F, W and J S, A (1994) Transport and magnetic critical current measurements in melt processed YBa2Cu3O7-d thick films. In: Critical Current Workshop, -1-1994 to --, Alpbach, Austria.

A R, J and D A, C and N J C, I and S P, A and A M, C and N McN, A and T W, B and F, W and J S, A (1994) Correlation of transport and magnetic critical current densities in melt processed YBa2Cu3O7-d thick films. Journal of Applied Physics, 76. 1720-. ISSN 0021-8979

Abel, CA and Ashby, MF (1994) Materials selection to resist creep and creep rupture. Technical Report. Cambridge Engineering Design Centre, Cambridge, UK.

Abel, CA and Edwards, KL and Ashby, MF (1994) Materials, processing and the environment in engineering design: the issues. Materials and Design, 15. pp. 179-193. ISSN 0261-3069

Akisanya, AR and Cocks, ACF and Fleck, NA (1994) Hydrostatic compaction of cylindrical particles. Journal of the Mechanics and Physics of Solids, 42. pp. 1067-1085. ISSN 0022-5096

Akisanya, AR and Cocks, ACF and Fleck, NA (1994) The role of contact-contact interaction in the densification of powders. In: The Powder Metallurgy World Congress (PM'94), -6-1994 to --, Paris, France pp. 757-760..

Akisanya, AR and Fleck, NA (1994) The decohesion of thin films on brittle substrates. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Akisanya, AR and Fleck, NA (1994) The edge cracking and decohesion of thin films. Journal of Materials Science, 31. pp. 3175-3199. ISSN 0020-7683

Ashby, MF (1994) Materials selection in mechanical design. La Metallurgia Italiana, 86. 475-. ISSN 0026-0843

Beaumont, PWR (1994) Damage accumulation. In: Damage Mechanics of Composite Materials. Composite Materials Series, 9 . Elsevier Press, Chapter 5-.

Bower, AF and Fleck, NA (1994) Brittle fracture under a sliding line contact. Journal of the Mechanics and Physics of Solids, 42. pp. 1375-1396. ISSN 0022-5096

Campbell, AM and Cardwell, DA and Ashworth, SP and Coombs, TA (1994) Power engineering applications of high temperature superconductors. IRC in Superconductivity Research Review 1994. pp. 174-181.

Cardwell, DA and Campbell, AM (1994) Large grain growth of YBa2Cu3O7-δ. IRC in Superconductivity Research Review 1994. pp. 144-151.

Cardwell, DA and Jones, AR and Ingle, NJC and Campbell, AM and Button, TW and Alford, NM and Wellhofer, F and Abell, JS (1994) Investigation of critical state in melt processed YBa 2Cu 3O 7-δ thick films. Cryogenics, 34. pp. 671-677. ISSN 0011-2275

Cebon, D and Ashby, MF (1994) Cambridge materials selector user's manual, version 2.0.

Cebon, D and Ashby, MF (1994) Materials selection for precision instruments. Measurement Science and Technology, 5. pp. 296-306. ISSN 0957-0233

Cox, BN and Carter, WC and Fleck, NA (1994) A binary model of textile composites-I: formulation. Acta Metallurgica et Materialia, 42. pp. 3463-3479. ISSN 0956-7151

D A, C and A R, J and N J C, I and A M, C and T W, B and N McN, A and F, W and J S, A (1994) Investigation of the critical state in melt processed YBa2Cu3O7−δ thick films. Cryogenics, 34. pp. 671-677. ISSN 0011-2275

Fleck, NA (1994) Development of anisotropy in powder compaction. In: The International Symposium on the Microstructure-Property Interactions in Composite Materials, -8-1994 to --, Aalborg, Denmark pp. 101-112..

Fleck, NA and Kang, KJ and Ashby, MF (1994) Overview no. 112: The cyclic properties of engineering materials. Acta Metallurgica et Materialia, 42. pp. 365-381. ISSN 0956-7151

Fleck, NA and Khang, KJ and Ashby, MF (1994) The cyclic properties of engineering materials. Acta Metallurgica et Materialia, 42. pp. 365-381. ISSN 0956-7151

Fleck, NA and Muller, GM and Ashby, MF and Hutchinson, JW (1994) Strain gradient plasticity: Theory and experiment. Acta Metallurgica et Materialia, 42. pp. 475-487. ISSN 0956-7151

Jelf, PM and Fleck, NA (1994) The failure of composite tubes due to combined compression and torsion. Journal of Materials Science, 29. pp. 3080-3084. ISSN 0022-2461

Jones, AR and Cardwell, DA and Ingle, NJC and Ashworth, SP and Campbell, AM and Alford, NM and Button, TW and Wellhofer, F and Abell, JS (1994) Correlation of transport and magnetic critical currents in melt-processed YBa 2Cu 3O 7-δ thick films. Journal of Applied Physics, 76. pp. 1720-1725. ISSN 0021-8979

Kapoor, A and Williams, JA (1994) Shakedown limits in sliding contacts on a surface-hardened half-space. Wear, 172. pp. 197-206. ISSN 0043-1648

Kapoor, A and Williams, JA and Johnson, KL (1994) The steady state sliding of rough surfaces. Wear, 175. pp. 81-92. ISSN 0043-1648

Karam, GN and Wegst, UGK and Shercliff, HR and Ashby, MF and Gibson, LJ (1994) Biomimicking of natural cellular materials. American Society of Mechanical Engineers, Bioengineering Division (Publication) BED, 28.

Kaute, DAW and Ashby, MF and Shercliff, HR (1994) Delamination, fibre bridging and toughness of ceramic matrix composites, version 2. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kaute, DAW and Ashby, MF and Shercliff, HR (1994) Mode I delamination in ceramic matrix composites with 2-dimensional reinforcement. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kaute, DAW and Ashby, MF and Shercliff, HR (1994) Mode II delamination in ceramic matrix composites with unidirectional reinforcement. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Newell, JM and Shercliff, HR and Ashby, MF (1994) Metal matrix composites: development of a database and case studies in design. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

SHERCLIFF, H and VEKINIS, G and Beaumont, PWR (1994) DIRECT OBSERVATION OF THE FRACTURE OF CAS-GLASS SIC COMPOSITES .2. NOTCHED TENSION. J MATER SCI, 29. pp. 4184-4190. ISSN 0022-2461

SHERCLIFF, HR and MYHR, OR and TJOTTA, S (1994) MODELING THE PROCESSING OF ALUMINUM-ALLOYS. MRS BULL, 19. pp. 25-28. ISSN 0883-7694

Shercliff, HR and Ashby, MF (1994) Design with metal matrix composites. Materials Science and Technology, 10. pp. 443-451. ISSN 0267-0836

Shercliff, HR and Vekinis, G and Beaumont, PWR (1994) Direct observation of fracture of CAS-Glass/SiC composites: Part I - Delamination. Journal of Materials Science, 29. pp. 3643-3652. ISSN 0022-2461

Shercliff, HR and Vekinis, G and Beaumont, PWR (1994) Direct observation of the fracture of CAS-Glass/SiC composites: Part I - Delamination. Journal of Materials Science, 29. pp. 3643-3652. ISSN 0022-2461

Shercliff, HR and Vekinis, G and Sofianopoulos, M and Munday, M and Fernandes, J (1994) Novel processing of Ni-toughened alumina and characterisation of fracture behaviour. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Slaughter, WS and Fleck, NA (1994) Microbuckling of fiber composites with random initial fiber waviness. Journal of the Mechanics and Physics of Solids, 42. pp. 1743-1766. ISSN 0022-5096

Slaughter, WS and Fleck, NA (1994) Viscoelastic microbuckling of fibre composites. Journal of Applied Mechanics, 60. pp. 802-806. ISSN 0021-8936

Smyshlyaev, VP and Fleck, NA (1994) Bounds and estimates for linear composites with strain gradient effects. Journal of the Mechanics and Physics of Solids, 42. pp. 1851-1882. ISSN 0022-5096

Smyshlyaev, VP and Fleck, NA (1994) Bounds and estimates for the overall plastic behaviour of composites with strain gradient effects. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 451. pp. 795-810. ISSN 1364-5021

Su, LY and Grovenor, CR and Goringe, MJ and Dewhurst, CD and Cardwell, DA and Jenkins, R and Jones, H (1994) Fabrication and properties of TBCCO films via air-atomising spray deposition of thallium-free precursors. Physica C: Superconductivity and its Applications, 229. pp. 70-78. ISSN 0921-4534

Su, LY and Grovenor, CRM and Goringe, MJ and Dewhurst, CD and Cardwell, DA and Jenkins, R and Jones, H (1994) Fabrication and properties of TBCCO films via air-atomising spray deposition of thallium-free precursors. Physica C: Superconductivity and its applications, 229. pp. 70-78. ISSN 0921-4534

Sutcliffe, MPF and Fleck, NA (1994) Microbuckle propagation in carbon fibre-epoxy composites. Acta Metallurgica et Materialia, 42. pp. 2219-2231. ISSN 0956-7151

Watson, IM and Atwood, MP and Cardwell, DA and Cumberbatch, TJ (1994) MOCVD of high quality YBa2Cu3O7-δ films: in situ preparation of fluorine-free layers from a flourinated barium source. Journal of Materials Chemistry, 4. pp. 1393-1401. ISSN 0959-9428

Watson, IM and Cardwell, DA and Atwood, MP (1994) Thin films by MOCVD for microwave and other applications. IRC in Superconductivity Research Review 1994. pp. 117-126.

Wegst, UGK and Shercliff, HR and Ashby, MF (1994) Mechanical performance of bamboo. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

YAN, Y and STOBBS, WM and CARDWELL, DA and CAMPBELL, AM (1994) TEM STUDY OF MELT-PROCESSED 123 YBACUO CONTAINING EXCESS 211. In: UNSPECIFIED pp. 794-795..

Yan, Y and Stobbs, WM and Cardwell, DA and Campbell, AM (1994) TEM study of melt processed 123 YBCO containing excess 211. In: 52nd Meeting of Microscopy Society of America, -7-1994 to --, New Orleans, USA.

1993

Akisanya, AR and Fleck, NA (1993) Fatigue and creep of a constrained metal wire. Acta Metallurgica et Materialia, 41. pp. 121-131. ISSN 0956-7151

Ashby, MF (1993) Criteria for selecting the components of composites. Acta Metallurgica et Materialia, 41. pp. 1313-1335. ISSN 0956-7151

Ashby, MF (1993) Design and selection composites. In: Troisieme Conference Europeenne sur les Materiaux et les Procedes Avances, 8-6-1993 to 10-6-1993, Paris, France.

Ashby, MF (1993) Selecting the components of composites. Journal de Physique IV, 3. C7-1595. ISSN 1155-4339

Ashby, MF and Abel, CA and Edwards, KL (1993) Materials and process selection. In: The 9th International Conference on Engineering Design (ICED'93), -- to --, The Hague, The Netherlands.

Ashby, MF and Cebon, D (1993) Materials selection in mechanical design. Journal de Physique IV, 3. C-1. ISSN 1155-4339

Bower, AF and Fleck, NA and Needleman, A and Ogbonna, N (1993) Indentation of a power law creeping solid. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 441. pp. 97-124. ISSN 1364-5021

Budiansky, B and Fleck, NA (1993) Compressive failure of fibre composites. International Journal of Fracture, 41. pp. 183-211. ISSN 0376-9429

Cebon, D and Ashby, MF and Chong, W-T (1993) Selecting materials in design. In: International Conference on Engineering Design (ICED'93), 17-8-1993 to 19-8-1993, The Hague, The Netherlands pp. 955-958..

D A, C and A R, J and N J C, I and A M, C and N McN, A and T W, B and S J, P and F, W and J S, A (1993) Magnetization and transport critical current densities in melt processed YBa2Cu3O7-d thick films. In: EUCAS 1: 1st European conference on applied superconductivity, 4-10-1993 to 9-10-1993, Göttingen, Germany pp. 641-644..

DURBAN, D and FLECK, NA (1993) SINGULAR PLASTIC FIELDS IN STEADY PENETRATION OF A RIGID CONE - CLOSURE. J APPL MECH-T ASME, 60. p. 1062. ISSN 0021-8936

Fleck, NA and Budiansky, B (1993) Compressive failure of fibre composites. Journal of the Mechanics and Physics of Solids, 41. p.183-. ISSN 0022-5096

Fleck, NA and Hutchinson, JW (1993) A phenomenological theory for strain gradient effects in plasticity. Journal of the Mechanics and Physics of Solids, 41. pp. 1825-1857. ISSN 0022-5096

Fleck, NA and Kang, KJ and Ashby, MF (1993) The cyclic properties of engineering materials. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Garton, DA and Khang, KJ and Fleck, NA and Ashby, MF (1993) Materials selection for minimum weight fatigue design. In: Theoretical Concepts and Numerical Analysis of Fatigue. Engineering Materials Advisory Services Ltd, Warley, UK, pp. 359-376. ISBN 0947817573

KAUTE, DAW and SHERCLIFF, HR and ASHBY, MF (1993) DELAMINATION, FIBER BRIDGING AND TOUGHNESS OF CERAMIC-MATRIX COMPOSITES. ACTA METALL MATER, 41. pp. 1959-1970. ISSN 0956-7151

Kaute, DAW and Ashby, MF and Shercliff, HR (1993) Delamination, fibre bridging, and toughness of ceramic matrix composites: version 1. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Lim, CY and Shercliff, HR (1993) Quench sensitivity of aluminium alloy 6082. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

SHARP, SJ and ASHBY, MF and FLECK, NA (1993) MATERIAL RESPONSE UNDER STATIC AND SLIDING INDENTATION LOADS. ACTA METALL MATER, 41. pp. 685-692. ISSN 0956-7151

Sargent, PM and Shercliff, HR and Wood, RL (1993) Modelling materials processing. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Slaughter, WS and Fleck, NA (1993) Compressive fatigue of fibre composites. Journal of the Mechanics and Physics of Solids, 41. pp. 1265-1284. ISSN 0022-5096

Slaughter, WS and Fleck, NA (1993) Microbuckling of fibre composites. In: The 1st ASME Joint Mechanics Meeting on the Mechanics of Thick Composites, -6-1993 to --, Charlottesville, VA, US 67-..

Slaughter, WS and Fleck, NA (1993) Viscoelastic microbuckling of fiber composites. ASME Transactions, Journal of Applied Mechanics, 60. pp. 802-806. ISSN 0021-8936

Slaughter, WS and Fleck, NA and Budiansky, B (1993) Compressive failure of Fiber composites: the roles of multiaxial loading and creep. Transactions of the ASME: Journal of Engineering Materials and Technology, 115. pp. 308-313. ISSN 0094-4289

Soutis, C and Curtis, PT and Fleck, NA (1993) Compressive failure of notched carbon fibre composites. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 440. pp. 241-256. ISSN 1364-5021

Staughter, WS and Fleck, NA (1993) Viscoelastic microbuckling of fiber composites. American Society of Mechanical Engineers (Paper). pp. 1-5. ISSN 0402-1215

Sutcliffe, MPF and Fleck, NA (1993) Effect of geometry on compressive failure of notched composites. International Journal of Fracture, 59. pp. 115-132. ISSN 0376-9429

Vekinis, G and Ashby, MF and Beaumont, PWR (1993) Plaster of Paris as a model material for brittle porous solids. Journal of Materials Science, 28. pp. 3221-3227. ISSN 0022-2461

Vekinis, G and Ashby, MF and Shercliff, HR and Beaumont, PWR (1993) The micromechanics of fracture of alumina and a ceramic-based fibre composite: Modelling the failure processes. Composites Science and Technology, 48. pp. 325-330.

Vekinis, G and Ashby, MF and Shercliff, HR and Beaumont, PWR (1993) The micromechanisms of fracture of alumina and a ceramic-based fibre composite: Modelling the failure processes. Composites Science and Technology, 48. 325-. ISSN 0266-3538

WILLIAMS, JA (1993) FILTRATION AND CONTAMINATION CONTROL IN LUBRICATION AND FLUID-POWER SYSTEMS - 4 MARCH 1993, LONDON, UK. TRIBOL INT, 26. p. 224. ISSN 0301-679X

WILLIAMS, JA (1993) SMALL-SCALE EFFECTS IN METAL-CUTTING. In: UNSPECIFIED pp. 289-299..

Wakabayashi, T and Williams, JA and Hutchings, IM (1993) The action of gaseous lubricants in the orthogonal machining of an aluminum alloy by titanium nitride coated tools. Surface and Coatings Technology, 57. pp. 183-189. ISSN 0257-8972

Wright, SC and Fleck, NA and Stronge, WJ (1993) Ballistic impact of polycarbonate—An experimental investigation. International Journal of Impact Engineering, 13. pp. 1-20. ISSN 0734-743X

Xie, Y and Williams, JA (1993) The generation of worn surfaces by the repeated interaction of parallel grooves. Wear, 162-16. pp. 864-872. ISSN 0043-1648

1992

Akisanya, AR and Fleck, NA (1992) Analysis of a wavy crack in sandwich specimens. International Journal of Fracture, 55. pp. 29-45. ISSN 0376-9429

Akisanya, AR and Fleck, NA (1992) Brittle fracture of adhesive joints. International Journal of Fracture, 58. pp. 93-114. ISSN 0376-9429

Akisanya, AR and Fleck, NA (1992) Compressive failure mechanisms in composites. In: The 17th Annual Mechanics of Composites Review, 27-10-1992 to 28-10-1992, Wright-Patterson Air Force Base, OH, US pp. 48-57..

Ashby, MF (1992) Materials Selection in Mechanical Design. Pergamon Press, Oxford, UK, -.

Ashby, MF (1992) Materials and the environment. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Ashby, MF (1992) Materials and the environment. Physica Status Solidi A, 131. pp. 625-638. ISSN 1862-6300

Beaumont, PWR and Spearing, SM and Kortschot, MT and Ashby, MF (1992) The physical modelling of damage in carbon fibre laminates. Advanced Composites Letters, 1. pp. 19-22. ISSN 0963-6935

Cebon, D and Ashby, MF (1992) Computer-aided materials selection for mechanical design. Metals and Materials. pp. 25-30. ISSN 0026-0940

Cebon, D and Ashby, MF (1992) Material selection for mechanical design. In: Computerisation and Networks of Materials Databases. ASTM Special Technical Publication, 1140 . ASTM.

Durban, D and Fleck, NA (1992) Singular plastic fields in steady penetration of a rigid cone. Journal of Applied Mechanics, 59. pp. 706-710. ISSN 0021-8936

FLECK, NA and JOHNSON, KL and MEAR, ME and ZHANG, LC (1992) COLD-ROLLING OF FOIL. P I MECH ENG B-J ENG, 206. pp. 119-131. ISSN 0954-4054

Fleck, NA and Johnson, KL and Mear, ME and Zhang, LC (1992) Cold rolling of foil. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 206. pp. 119-131. ISSN 0954-4054

Fleck, NA and Kuhn, LT and McMeeking, RM (1992) Yielding of metal powder bonded by isolated contacts. International Journal of Fracture, 40. pp. 1139-1162. ISSN 0376-9429

Flores, M and Rosa, ME and Barlow, CY and Fortes, MA and Ashby, MF (1992) The properties and uses of consolidated cork dust. Journal of Materials Science, 27. pp. 5629-5634. ISSN 0022-2461

Garton, DA and Kang, KJ and Fleck, NA and Ashby, MF (1992) Materials selection for minimum weight fatigue design. In: The EMAS Conference on Theoretical Concepts and Numerical Analysis of Fatigue, 25-5-1992 to 27-5-1992, Birmingham, UK.

ION, JC and SHERCLIFF, HR and ASHBY, MF (1992) DIAGRAMS FOR LASER MATERIALS PROCESSING. ACTA METALL MATER, 40. pp. 1539-1551. ISSN 0956-7151

JELF, PM and FLECK, NA (1992) COMPRESSION FAILURE MECHANISMS IN UNIDIRECTIONAL COMPOSITES. J COMPOS MATER, 26. pp. 2706-2726. ISSN 0021-9983

JOHNSON, KL and SHERCLIFF, HR (1992) SHAKEDOWN OF 2-DIMENSIONAL ASPERITIES IN SLIDING CONTACT. INT J MECH SCI, 34. pp. 375-394. ISSN 0020-7403

Kang, KJ and Garton, D and Fleck, NA (1992) Compilation of fatigue design data. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kedward, KT and Beaumont, PWR (1992) On the notch sensitivity and toughness of a ceramic composite. In: ASME Annual Winter Meeting on Engineering Materials, 8-11-1992 to 12-11-1992, Anaheim, CA, USA.

Kedward, KT and Beaumont, PWR (1992) The treatment of fatigue and damage accumulation in composite design. International Journal of Fatigue, 14. pp. 283-294. ISSN 0142-1123

Shercliff, HR and Grong, O and Myhr, OR and Ashby, MF (1992) Process modelling applied to age hardening aluminium alloys. In: ICAA3 (3rd International Conference on Aluminium Alloys), -6-1992 to --, Trondheim, Norway.

Shercliff, HR and Vekinis, G and Ashby, MF and Beaumont, PWR (1992) Direct observation of fracture of CAS-glass/SiC composites and processing of toughened alumina. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Vekinis, G and Ashby, MF and Beaumont, PWR (1992) Direct observation of CAS-glass/SiC composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Spearing, SM and Beaumont, PWR (1992) Fatigue damage mechanics of composite materials Part III: Prediction of post-fatigue strength. Composites Science and Technology, 44. pp. 299-307. ISSN 0266-3538

Spearing, SM and Beaumont, PWR (1992) Fatigue damage mechanics of composite materials Part IV: Prediction of post-fatigue stiffness. Composites Science and Technology, 44. pp. 309-317. ISSN 0266-3538

Spearing, SM and Beaumont, PWR (1992) Fatigue damage mechanics of composite materials. I: Experimental measurement of damage and post-fatigue properties. Composites Science and Technology, 44. pp. 159-168. ISSN 0266-3538

Spearing, SM and Beaumont, PWR (1992) Fatigue damage mechanics of composite materials. II: A damage growth model. Composites Science and Technology, 44. pp. 169-177. ISSN 0266-3538

Spearing, SM and Beaumont, PWR and Kortschot, MT (1992) The fatigue damage mechanics of notched carbon fibre/PEEK laminates. Composites, 23. pp. 305-311. ISSN 0010-4361

Sutcliffe, MPF and Fleck, NA (1992) Compressive failure of notched carbon fibre-epoxy laminates. In: European Conference on Composites Testing and Standardisation, -9-1992 to --, Amsterdam, Netherlands pp. 123-132..

Vekinis, G and Ashby, MF and Shercliff, HR and Beaumont, PWR (1992) The micromechanisms of fracture of Alumina and a ceramic-based fibre composite: modelling the failure processes. In: International Conference on Microphenomena in Fibre Composites, 30-7-1992 to 1-8-1992, Ministry of Technology, Tel Aviv, Israel.

WILLIAMS, JA and HYNCICA, AM (1992) MECHANISMS OF ABRASIVE WEAR IN LUBRICATED CONTACTS. WEAR, 152. pp. 57-74. ISSN 0043-1648

WILLIAMS, JA and XIE, Y (1992) THE GENERATION OF WEAR SURFACES. In: UNSPECIFIED A158-A164..

WRIGHT, SC and HUANG, Y and FLECK, NA (1992) DEEP PENETRATION OF POLYCARBONATE BY A CYLINDRICAL PUNCH. MECH MATER, 13. pp. 277-284. ISSN 0167-6636

Wakabayashi, T and Williams, JA and Hutchings, IM (1992) The action of gaseous lubricants in metal cutting. In: 6th Joint IMechE/IOP Meeting, 10-4-1992 to --, London, UK pp. 33-40..

Waterman, NA and Ashby, MF (1992) Elsevier materials selector. Elsevier Applied Science.

Williams, JA (1992) Small scale effects in metal cutting. In: 19th Leeds-Lyon Symposium on Thin Films in Tribology, 8-9-1992 to 11-9-1992, Leeds, UK -..

Williams, JA and Hyncica, AM (1992) Abrasive wear in lubricated contacts. Journal of Physics D: Applied Physics, 25. A81-A90. ISSN 0022-3727

Williams, JA and Kapoor, A (1992) 19th Leeds-Lyon symposium on tribology. 8-10 September 1992, Leeds, UK. Tribology International, 25. pp. 411-412. ISSN 0301-679X

Williams, JA and Xie, Y (1992) Generation of wear surfaces. Journal of Physics D: Applied Physics, 25. A158-A164. ISSN 0022-3727

Williams, JA and Xie, Y (1992) The generation of wear surfaces by the interaction of parallel grooves. Wear, 155. pp. 363-379. ISSN 0043-1648

Williams, JA and Xie, Y (1992) The generation of wear surfaces. Journal of Physics D: Applied Physics, 25. A158-A164. ISSN 0022-3727

Wright, SC and Huang, Y and Fleck, NA (1992) Deep penetration of polycarbonate by a cylindrical punch. Mechanics of Materials, 13. pp. 277-284. ISSN 0167-6636

1991

Ashby, MF (1991) Materials and shape. Acta Metallurgica et Materialia, 39. pp. 1025-1039. ISSN 0956-7151

Ashby, MF (1991) On materials and shape. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Ashby, MF and Beaumont, PWR and Shercliff, HR and Vekinis, G (1991) Direct observation of fracture and the damage mechanics of ceramics. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR and Spearing, SM (1991) The damage mechanics of static and cyclic failure of carbon fibre-polymer composites. In: The 1st International Conference on the Deformation and Fracture of Composites, -3-1991 to --, Manchester, UK p.511-..

Beaumont, PWR and Spearing, SM and Kortschot, MT (1991) Development of fatigue damage mechanics for application to the design of damage-tolerant composite components. In: The International Conference on Spacecraft Structures and Mechanical Testing, -4-1991 to --, Noordwijk, The Netherlands pp. 91-96..

Beaumont, PWR and Spearing, SM and Kortschot, MT (1991) Development of fatigue damage mechanics for application to the design of damage-tolerant composite components. In: The 14th Annual Energy-Sources Technology Conference: Symposium on Composite Material Technology, -1-1991 to --, Houston, TX pp. 89-96..

Beaumont, PWR and Spearing, SM and Kortschot, MT (1991) The mechanics of fatigue damage in structural composite materials. In: Composites: Design, Manufacture, and Application: the 8th International Conference on Composite Materials (ICCM-8), -7-1991 to --, Honolulu, HI.

Beaumont, PWR and Vekinis, G and Shercliff, HR (1991) Failure mechanisms and toughness of Al2O3 ductile-particle toughened ceramics and SiC fibre-ceramic composites. American Society of Mechanical Engineers, Aerospace Division (Publication) AD, 22. pp. 1-6. ISSN 0733-4230

Cardwell, DA (1991) High temperature superconducting materials. In: Electronic Materials: From Silicon to Organics. Plenum Press, New York, USA, pp. 417-430.

Cardwell, DA and Cockburn, JW and Cowey, L and Jones, H (1991) The dependence of critical current density on grain morphology in BiCaSrCu2Ox ceramic. Cryogenics, 31. pp. 105-109. ISSN 0011-2275

Cebon, D and Ashby, MF (1991) Computer-based materials selection for mechanical design. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Fleck, NA (1991) Brittle fracture due to an array of microcracks. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 432. pp. 55-76. ISSN 0080-4630

Fleck, NA and Durban, D (1991) Steady penetration of a rigid cone with a rough wall into a power-law viscous solid. Journal of Applied Mechanics, 58. pp. 872-880. ISSN 0021-8936

Fleck, NA and Hutchinson, J and Suo, Z (1991) Crack path selection in a brittle adhesive layer. International Journal of Solids and Structures, 27. pp. 1683-1703. ISSN 0020-7683

Fleck, NA and Otoyo, H and Needleman, A (1991) Indentation of porous solids. International Journal of Solids and Structures, 29. pp. 1613-1636. ISSN 0020-7683

Ion, JC and Shercliff, HR and Ashby, MF (1991) A diagram for laser materials processing. In: 3rd Nordic Laser Materials Processing, -- to --, Lappeenranta, Finland.

Kedward, KT and Beaumont, PW (1991) The treatment of fatigue and damage accumulation in composite design. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kortschot, MT and Beaumont, PWR (1991) Damage mechanics of composite materials. III: Prediction of damage growth and notched strength. Composites Science and Technology, 40. pp. 147-165. ISSN 0266-3538

Kortschot, MT and Beaumont, PWR (1991) Damage mechanics of composite materials. IV: The effect of lay-up on damage growth and notched strength. Composites Science and Technology, 40. pp. 167-169. ISSN 0266-3538

Kortschot, MT and Beaumont, PWR (1991) Damage-based notched strength modelling. In: Composite Materials: Fatigue and Fracture. ASTM Special Technical Publication, 1110 . American Society for Testing and Materials, pp. 596-616.

SHERCLIFF, HR and ASHBY, MF (1991) MODELING THERMAL-PROCESSING OF ALUMINUM-ALLOYS. In: UNSPECIFIED pp. 85-88..

SHERCLIFF, HR and ASHBY, MF (1991) THE PREDICTION OF CASE DEPTH IN LASER TRANSFORMATION HARDENING. METALL TRANS A, 22. pp. 2459-2466. ISSN 0360-2133

SOUTIS, C and FLECK, NA and CURTIS, PT (1991) HOLE HOLE INTERACTION IN CARBON-FIBER EPOXY LAMINATES UNDER UNIAXIAL COMPRESSION. COMPOSITES, 22. pp. 31-38. ISSN 0010-4361

Shercliff, HR (1991) Fatigue crack closure in silicon carbide-reinforced aluminium alloys. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Soutis, C and Fleck, NA (1991) Notch sensitivity of composite laminates loaded in compression. In: Applied Solid Mechanics 4: the 4th Conference on Applied Solid Mechanics, Leicester, 3-5 April 1991, 3-4-1991 to 5-4-1991 pp. 101-115..

Soutis, C and Fleck, NA and Smith, PA (1991) Compression fatigue behaviour of notched carbon fibre-epoxy laminates. International Journal of Fatigue, 13. pp. 303-312. ISSN 0142-1123

Soutis, C and Fleck, NA and Smith, PA (1991) Failure prediction technique for compression loaded carbon fibre-epoxy laminate with open holes. Journal of Composite Materials, 25. pp. 1476-1498. ISSN 0021-9983

Spearing, SM and Beaumont, PWR and Ashby, MF (1991) Fatigue damage mechanics of notched graphite-epoxy laminates. In: Composite Materials: Fatigue and Fracture. ASTM Special Technical Publication, 1110 . American Society for Testing and Materials, pp. 617-637.

Spearing, SM and Beaumont, PWR and Kortschott, MT (1991) The fatigue damage mechanics of notched carbon fibre/PEEK laminates. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Sutcliffe, MPF (1991) Measurements of the rheological properties of a kerosene metal-rolling lubricant. Proceedings of the Institution of Mechanical Engineers, B: Management and Engineering Manufacture, B205. pp. 215-219. ISSN 0263-7154

Sutcliffe, MPF (1991) Traction measurements in mixed elastohydrodynamic lubrication with a controlled circumferential roughness. Proceedings of the Institution of Mechanical Engineers, C: Mechanical Engineering Sciences, C205. pp. 265-273. ISSN 0263-7154

Vekinis, G and Ashby, MF and Beaumont, PWR (1991) The compressive failure of alumina containing controlled distributions of flaws. Acta Metallurgica et Materialia, 39. pp. 2583-2588. ISSN 0956-7151

Vekinis, G and Ashby, MF and Beaumont, PWR and Shercliff, HR (1991) Failure mechanisms of ductile particle toughened ceramics and fibre strengthened ceramic composites. In: The 112th ASME Winter Annual Meeting on Failure Mechanisms in High Temperature Composite Materials, -12-1991 to --, Atlanta, GA, USA.

Vekinis, G and Beaumont, PWR and Pritchard, G and Wainwright, R (1991) Dynamic observation of fracture in particulate-filled epoxy resins reinforced with rubber. Journal of Materials Science, 26. pp. 4527-4533. ISSN 0022-2461

Vekinis, G and Shercliff, HR and Beaumont, PWR (1991) Dynamic testing of ceramics and ceramic composites in the SEM. Metals and Materials, 7. pp. 279-284. ISSN 0026-0940

1990

Anderson, PM and Fleck, NA and Johnson, KL (1990) Localisation of plastic deformation in shear due to microcracks. Journal of the Mechanics and Physics of Solids, 38. pp. 681-699. ISSN 0022-5096

Beaumont, PWR (1990) The mechanics of fatigue damage in structural composite materials. In: The 4th European Conference on Composite Materials (ECCM'90): Developments in the Science and Technology of Composite Materials, -9-1990 to --, Stuttgart, Germany pp. 195-205..

Beaumont, PWR and Schultz, JM and Friedrich, K (1990) Design with advanced composite materials. Delaware Composites Design Encyclopedia, 4 . Technomic.

Beaumont, PWR and Spearing, SM (1990) Development of fatigue damage mechanics for application to the design of structural composite components. In: Mechanical Identification of Composites: the European Mechanics Colloquium on Experimental Identification of the Mechanical Characteristics of Composite Materials and Structures, -12-1990 to --, Saint-Etienne, France pp. 311-326..

Ganczakowski, HL and Ashby, MF and Beaumont, PWR and Smith, PA (1990) The behaviour of Kevlar fibre-epoxy laminates under static and fatigue loading—Part 2: Modelling. Composites Science and Technology, 37. pp. 371-392. ISSN 0266-3538

Jelf, M and Soutis, C and Fleck, NA (1990) Notched compression failure of carbon-fibre PEEK laminates. In: The 3rd International Conference on Advanced Composites in Emerging Technologies, Patras, Greece, 20-24 August 1990, 20-8-1990 to 24-8-1990, Patras, Greece pp. 204-215..

Kortschot, MT and Beaumont, PWR (1990) Damage mechanics of composite materials: II — a damaged-based notched strength model. Composites Science and Technology, 39. pp. 303-326. ISSN 0266-3538

Kortschot, MT and Beaumont, PWR (1990) Damage mechanics of composite materials: I— Measurements of damage and strength. Composites Science and Technology, 39. pp. 289-290. ISSN 0266-3538

SHERCLIFF, HR and ASHBY, MF (1990) A PROCESS MODEL FOR AGE HARDENING OF ALUMINUM-ALLOYS .1. THE MODEL. ACTA METALL MATER, 38. pp. 1789-1802. ISSN 0956-7151

SHERCLIFF, HR and ASHBY, MF (1990) A PROCESS MODEL FOR AGE HARDENING OF ALUMINUM-ALLOYS .2. APPLICATIONS OF THE MODEL. ACTA METALL MATER, 38. pp. 1803-1812. ISSN 0956-7151

SUTCLIFFE, MPF and JOHNSON, KL (1990) LUBRICATION IN COLD STRIP ROLLING IN THE MIXED REGIME. P I MECH ENG B-J ENG, 204. pp. 249-261. ISSN 0954-4054

Shercliff, HR and Fleck, NA (1990) Effect of specimen geometry on fatigue crack growth in plane strain: I. constant amplitude response. Fatigue and Fracture of Engineering Materials and Structures, 13. pp. 287-296. ISSN 8756-758X

Shercliff, HR and Fleck, NA (1990) Effect of specimen geometry on fatigue crack growth in plane strain: II. overload response. Fatigue and Fracture of Engineering Materials and Structures, 13. pp. 297-310. ISSN 8756-758X

Soutis, C and Fleck, NA (1990) Compressive fatigue damage in T800/924C carbon fibre-epoxy laminates with an open hole. In: Developments in the Science and Technology of Composite Materials: the 4th European Conference on Composite Materials (ECCM-4), Stuttgart, Germany, 25-28 September 1990, 25-9-1990 to 28-9-1990 pp. 221-228..

Soutis, C and Fleck, NA (1990) Investigation of the static and fatigue compressive behaviour of carbon fibre composite laminates. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Soutis, C and Fleck, NA (1990) Software package for prediction of compression strength of notched composite panel. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Soutis, C and Fleck, NA (1990) Static compression failure of carbon fibre T800/924C composite plate with a single hole. Journal of Composite Materials, 24. pp. 536-558. ISSN 0021-9983

Spearing, SM and Beaumont, PWR (1990) Fatigue damage mechanics of carbon fibre composites. In: The 8th Biennial European Conference on Fracture (ECF-8): Fracture Behaviour and Design of Materials and Structures, 2-10-1990 to 5-10-1990, Turin, Italy.

Spearing, SM and Beaumont, PWR (1990) Fatigue damage mechanics of composite materials I: experimental measurement of damage and post-fatigue properties. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Spearing, SM and Beaumont, PWR (1990) Fatigue damage mechanics of composite materials II: a damage growth model. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Spearing, SM and Beaumont, PWR (1990) Fatigue damage mechanics of composite materials III: prediction of post-fatigue strength. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Spearing, SM and Beaumont, PWR and Ashby, MF (1990) Fatigue damage mechanics of notched carbon fibre epoxy laminates. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Spearing, SM and Beaumont, PWR and Smith, PA (1990) Fatigue damage mechanics of composite materials IV: prediction of post-fatigue stiffness. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Stronge, WA and Fleck, NA and Liu, JH (1990) High strain-rate shear response of Polycarbonate and Polymethyl Methacrylate. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 429. pp. 459-479. ISSN 0080-4630

Sutcliffe, MPF (1990) Central film thickness charts for elliptical contacts. Proceedings of the Institution of Mechanical Engineers, C: Mechanical Engineering Sciences, 204. pp. 273-275. ISSN 0954-4062

Sutcliffe, MPF (1990) Experimental measurements of lubricant film thickness in cold strip rolling. Proceedings of the Institution of Mechanical Engineers, C: Mechanical Engineering Sciences, C204. pp. 263-273. ISSN 0263-7154

Vekinis, G and Ashby, MF and Beaumont, PWR (1990) Direct observation of fracture and the damage mechanics of ceramics: 2nd annual progress report. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Vekinis, G and Ashby, MF and Beaumont, PWR (1990) R-Curve behaviour of Alumina ceramics. Acta Metallurgica et Materialia, 38. pp. 1151-1162. ISSN 1359-6454

1989

Barlow, CY and Ashby, MF (1989) Cork dust composites. In: 10th Riso International Symposium on Metallurgy and Materials Science: Materials Architecture, 4-9-1989 to 8-9-1989, Roskilde, Denmark pp. 275-281..

Beaumont, PWR (1989) Design with advanced composite materials. In: Design with Advanced Composite Materials. The Design Council / Springer-Verlag, Chapter 10-.

Beaumont, PWR (1989) "Failure of composites" stress concentrations, cracks and notches. In: Concise Encyclopedia of Composite Materials. Advances in Materials Science and Engineering . Pergamon Press, Oxford, UK, pp. 75-77.

Beaumont, PWR (1989) On Kevlar fibre-epoxy laminates under fatigue loading. In: ASME International Conference on Advanced Materials, 24-7-1989 to 28-7-1989, Honolulu, USA.

Beaumont, PWR (1989) The failure of fibre composites: an overview. Journal of Strain Analysis, 24. pp. 189-205. ISSN 0309-3247

Beaumont, PWR and Wells, JK (1989) Toughness of fibrous composites. In: Concise Encyclopedia of Composite Materials. Advances in Materials Science and Engineering . Pergamon Press, Oxford, UK, pp. 275-280.

Cardwell, DA (1989) Electronic potentialities of high-temperature superconductors. IEE Review, 35. pp. 57-60. ISSN 0013-5127

Cardwell, DA and Cockburn, JW and Whatmore, RW (1989) The dependence of microstructure and superconducting phase formation on post-sintering cool-rate of BiCaSrCu2Ox ceramic. Superconductor Science and Technology, 2. pp. 132-139. ISSN 0953-2048

Cardwell, DA and Cooper, MJ (1989) The effect of exchange and correlation on the agreement between APW and LCAO compton profiles and experiment. Journal of Physics: Condensed Matter, 1. pp. 9357-9367. ISSN 0953-8984

Cardwell, DA and Cooper, MJ and Wakoh, S (1989) Compton scattering studies of electron correlation effects in chromium. Journal of Physics: Condensed Matter, 1. pp. 541-550. ISSN 0953-8984

Cardwell, DA and Shorrocks, NM (1989) Possible antipolar pairing mechanism in high-temperature superconductors. Physics Review B: Condensed Matter and Materials Physics, 40. pp. 6564-6569. ISSN 1550-235X

FLECK, NA and WRIGHT, SC (1989) DEFORMATION AND FRACTURE OF POLYCARBONATE AT HIGH-STRAIN RATE. INST PHYS CONF SER. pp. 73-80. ISSN 0951-3248

Fleck, NA and Durban, D (1989) Asymptotic fields at tip of conical notches and inclusions in a power hardening solid. Journal of the Mechanics and Physics of Solids, 37. pp. 233-263. ISSN 0022-5096

Fleck, NA and Hutchinson, JW and Tvergaard, V (1989) Softening by void nucleation and growth in tension and shear. Journal of the Mechanics and Physics of Solids, 37. pp. 515-540. ISSN 0022-5096

Fleck, NA and Shercliff, HR (1989) Overload retardation due to plasticity-induced crack closure. In: ICF7 (7th International Conference on Fracture), -3-1989 to --, Houston, USA.

Fleck, NA and Wright, SC and Harding, J (1989) Deformation and fracture of polycarbonate at high strain rate. In: The 4th International Conference on the Mechanical Properties of Materials at High Rates of Strain, Oxford, UK, 19-22 March 1989, 19-3-1989 to 22-3-1989 pp. 73-80..

Ganczakowski, HL and Beaumont, PWR (1989) The behaviour of Kevlar fibre-epoxy laminates under static and fatigue loadings. Part I—experimental. Composites Science and Technology, 36. pp. 299-319. ISSN 0266-3538

Johnson, KL and Shercliff, HR and Kopalinsky, E (1989) Shakedown of two-dimensional asperities in sliding contact. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kortschot, MT and Ashby, MF and Beaumont, PWR (1989) Damage mechanics of composite materials III: prediction of damage growth and notched strength. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kortschot, MT and Beaumont, PWR (1989) Damage mechanics of composite materials I: measurement of damage and strength. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kortschot, MT and Beaumont, PWR (1989) Damage mechanics of composite materials II: a damage-based notched strength model. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kortschot, MT and Beaumont, PWR (1989) Damage mechanics of composite materials IV: the effect of lay-up on damage growth and notched strength. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kortschot, MT and Beaumont, PWR (1989) Damage-based notched strength modelling: a summary. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

SUTCLIFFE, MPF (1989) CENTRAL FILM THICKNESSES IN ELLIPTICAL CONTACTS. P I MECH ENG C-J MEC, 203. pp. 387-392. ISSN 0954-4062

Shercliff, HR and Ashby, MF (1989) Modelling of the response of heat-treatable aluminium alloys to thermal processing. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Ashby, MF (1989) The prediction of case depth in laser transformation hardening. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Fleck, NA (1989) The effect of geometry on fatigue crack growth in plane strain. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shin, S and Fleck, NA (1989) Fatigue and fracture of a zinc die casting alloy. International Journal of Fatigue, 11. pp. 341-346. ISSN 0142-1123

Sutcliffe, MPF (1989) Central film thicknesses in elliptical contacts. Proceedings of the Institution of Mechanical Engineers, C: Journal of Mechanical Engineering Sciences, 203. pp. 387-392. ISSN 0954-4062

Sutcliffe, MPF (1989) Friction and lubrication in metal rolling. PhD thesis, UNSPECIFIED.

Vekinis, G and Beaumont, PWR (1989) Direct observation of fracture and the damage mechanics of ceramics. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

1988

Beaumont, PWR (1988) Fatigue damage mechanics of fibre composites. In: The International Conference on Materials and Engineering Design: The Next Decade, -- to -- pp. 311-319..

Beaumont, PWR (1988) Micromechanics of composite fracture. In: Engineering Materials 200: Commemorating Australia’s Bicentenary. Materials Forum, 11 . Trans Tech Publications, Ruschcutters Bay, NSW, Australia, pp. 332-340.

Beaumont, PWR (1988) Micromechanisms of crack extension in brittle polymers containing rubbery particles. In: American Chemical Society International Conference on Toughened Plastics, 21-9-1988 to 25-9-1988, Los Angeles, USA.

Beaumont, PWR (1988) The failure of fibre composites: a perspective. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR (1988) The micromechanics of crack extension in brittle polymers containing rubbery particles. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

De Vouvray, A and Haug, E and Dowlatyari, E and Beaumont, PWR and Spearing, M (1988) Advanced model development and validation for composite damage mechanics. In: The ESA Conference on Advanced Structural Materials for the Design of Space Applications, 23-3-1988 to 25-3-1988, Noordwijk, The Netherlands pp. 343-360..

FLECK, NA and WRIGHT, SC and LIU, JH and STRONGE, WJ (1988) BALLISTIC PERFORATION OF POLYCARBONATE SHEET AND ITS HIGH-STRAIN RATE RESPONSE. J PHYS-PARIS, 49. pp. 145-149. ISSN 0302-0738

Fleck, NA (1988) Creep fracture under remote shear. In: The 239th European Mechanics Colloquium on the Mechanics of Creep Brittle Materials, 15-8-1988 to 17-8-1988, Leicester, UK pp. 290-309..

Fleck, NA and Wright, SC and Liu, JH and Stronge, WJ (1988) Penetration response of polycarbonate plates. In: The 7th International Conference on Deformation, Yield and Fracture of Polymers, 11-4-1988 to 14-4-1988, Cambridge, UK 24/1-24/4..

Kortschot, MT and Beaumont, PWR (1988) Damage mechanics of carbon fibre composite materials. In: The ESA Conference on Advanced Structural Materials for the Design of Space Applications, 23-3-1988 to 25-3-1988, Noordwijk, The Netherlands pp. 335-342..

Shercliff, HR (1988) Strength loss in the heat affected zones of welds in non-heat-treatable aluminium alloys. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Soutis, C and Smith, PA and Fleck, NA (1988) Investigation of the compressive strength of carbon fibre reinforced plastics. In: The International Conference on Phase Interactions in Composite Materials, 22-8-1988 to 27-8-1988, Patras, Greece pp. 327-344..

Sutcliffe, MPF (1988) Surface asperity deformation in metal forming processes. International Journal of Mechanical Sciences, 30. pp. 847-868. ISSN 0020-7403

Whatmore, RW and Cardwell, DA and Cockburn, JW and Patel, A and Osbond, PC and Dorey, LY and Wort, CJ and Ainger, FW (1988) High Tc yttrium barium copper oxide ceramics and thin films. Physica C: Superconductivity, 153-15. pp. 790-791. ISSN 0921-4534

1987

Beaumont, PWR (1987) The micromechanics of composite fracture. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Cardwell, DA and Osbond, PC and Patel, A and Wort, CJH and Stevenson, A and Latimer, MJ and Whatmore, RW and Ainger, FW (1987) Fabrication and characterization of YBa2Cu3O7 superconducting ceramics. In: Workshop on HiTc Superconductors and Potential Applications, 1-7-1987 to 3-7-1987, Genoa, Italy.

Cardwell, DA and Osbond, PC and Patel, A and Wort, CJH and Stevenson, A and Latimer, MJ and Whatmore, RW and Ainger, FW (1987) The fabrication and characterisation of YBa2Cu3O7 superconducting ceramics. In: European Ceramic Society Meeting `Superconducting Ceramics', 9-9-1987 to 10-9-1987, Canterbury, UK pp. 53-56..

Eve, RW and Williams, JA (1987) ABRASIVE WEAR OF LUBRICATED CONTACTS. I Mech E Conference Publications (Institution of Mechanical Engineers). pp. 183-192. ISSN 0144-0799

Fleck, NA and Johnson, KL (1987) Towards a new theory of cold rolling thin foil. International Journal of Mechanical Science, 29. pp. 507-524. ISSN 0020-7403

Ganczakowski, HL and Smith, PA and Beaumont, PW (1987) On the modulus of KFRP laminates in static and fatigue loading. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Ganczakowski, HL and Smith, PA and Beaumont, PWR (1987) On the modulus of KFRP laminates in static and fatigue loading. In: The ICCM/ECCM Joint International Conference on Composite Materials, -7-1987 to --, London, UK pp. 166-175..

Kirkpatrick, RJ and Williams, JA and Paetke, SJ (1987) GROOVE FORMATION AND INTERACTION DURING ABRASION OF COPPER. I Mech E Conference Publications (Institution of Mechanical Engineers). pp. 239-245. ISSN 0144-0799

Kortschot, MT and Beaumont, PWR and Nixon, WC and Breton, BC (1987) Crack advancement in a carbon fibre-epoxy composite observed by dynamic SEM. In: The ICCM/ECCM Joint International Conference on Composite Materials, -7-1987 to --, London, UK pp. 388-396..

Kortschot, MT and Beaumont, PWR and Nixon, WC and Breton, BC (1987) Crack advancement in a carbon-fibre epoxy composite observed by dynamic scanning electron microscopy. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR (1987) Modelling of thermal processes in metallic alloys. PhD thesis, UNSPECIFIED.

Shin, CS and Fleck, NA (1987) Overload retardation in a structural steel. Fatigue and Fracture of Engineering Materials and Structures, 9. pp. 379-393. ISSN 8756-758X

Wells, JK and Beaumont, PWR (1987) The prediction of R-curves and notched tensile strength for composite laminates. Journal of Materials Science, 22. pp. 1457-1468. ISSN 0022-2461

1986

Ahmed, ZB and Ashby, MF and Beaumont, PWR (1986) The contribution of particle-stretching to the fracture toughness of rubber modified polymers. Scripta Metallurgica, 20. pp. 843-848. ISSN 1359-6462

Ashby, MF and Jones, DRH (1986) Engineering materials 2: an introduction to microstructures, processing and design. International Series on Materials Science and Technology, 39 . Pergamon Press, Oxford, UK.

Brown, DJ and Windle, AH and Gilbert, DG and Beaumont, PWR (1986) Dynamic studies of peel failure in metallized polyester films. Journal of Materials Science, 21. pp. 314-320. ISSN 0022-2461

Cardwell, DA and Cooper, MJ (1986) Directional compton profile measurements of aluminium with 60 keV and 412 keV radiation. Philosophical Magazine B: Physics of Condensed Matter Electronic Optical and Magnetic Properties, 54. pp. 37-49. ISSN 0141-8637

Cooper, MJ and Laundy, D and Cardwell, DA and Timms, DN and Holt, RS and Clarke, G (1986) Spin-dependent momentum distribution in iron studied with circularly polarized synchrotron radiation. Physical Review B (Condensed Matter and Materials Physics), 34. pp. 5984-5987. ISSN 1098-0121

Evans, AG and Ahmad, ZB and Gilbert, DG and Beaumont, PWR (1986) Mechanisms of toughening in rubber toughened polymers. Acta Metallurgica, 34. pp. 79-87. ISSN 0001-6160

FLECK, NA (1986) FINITE-ELEMENT ANALYSIS OF PLASTICITY-INDUCED CRACK CLOSURE UNDER PLANE-STRAIN CONDITIONS. ENG FRACT MECH, 25. pp. 441-449. ISSN 0013-7944

Fleck, NA (1986) FATIGUE CRACK GROWTH - THE COMPLICATIONS. pp. 75-88.

Fleck, NA (1986) Finite element analysis of plasticity-induced crack closure under plane strain conditions. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Fleck, NA (1986) Finite element analysis of plasticity-induced crack closure under plane strain conditions. Engineering Fracture Mechanics, 25. pp. 441-449. ISSN 0013-7944

Fleck, NA and Hutchinson, JW (1986) Void growth in shear. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 407. pp. 435-458. ISSN 0080-4630

Fleck, NA and Newman, JC (1986) Analysis of crack closure under plane strain conditions. In: The International Symposium on the Mechanics of Fatigue Crack Closure, -- to --.

Fleck, NA and Newman, JC (1986) Analysis of crack closure under plane strain conditions. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Gilbert, DG and Ashby, MF and Beaumont, PWR (1986) Modulus-maps for amorphous polymers. Journal of Materials Science, 21. pp. 3194-3210. ISSN 0022-2461

Holt, RS and Laundy, D and Cardwell, DA and Cooper, MJ and Naylor, T and Manninen, SO and Hatton, P (1986) Polarised X-Ray study of the spin dependent compton profile of ferromagnetic iron. Nuclear Instruments and Methods in Physics Research A: Accelerators, Spectrometers, Detectors and Associated Equipment, 243. pp. 608-610. ISSN 0168-9002

Manninen, SO and Cooper, MJ and Cardwell, DA (1986) Gamma-ray source line broadening and compton line profile analysis. Nuclear Instruments and Methods in Physics Research A: Accelerators, Spectrometers, Detectors and Associated Equipment, 245. pp. 485-489. ISSN 0168-9002

Poursartip, A and Ashby, MF and Beaumont, PWR (1986) The fatigue damage mechanics of a carbon fibre composite laminate: I — development of the model. Composites Science and Technology, 25. pp. 193-218. ISSN 0266-3538

Poursartip, A and Beaumont, PWR (1986) The fatigue damage mechanics of a carbon fibre composite laminate: II — life prediction. Composites Science and Technology, 25. pp. 283-299. ISSN 0266-3538

Poursartip, A and Smith, PA and Ganczakowski, H and Beaumont, PWR (1986) A computer-controlled fatigue machine for composite testing. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Ashby, MF (1986) Master plots for predicting the case-depth in laser surface treatments. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Stronge, WJ and Sutcliffe, MPF and Yu, T (1986) Wrinkling of elastoplastic circular plates during stamping. Experimental Mechanics, 26. pp. 345-353. ISSN 0014-4851

1985

Ashby, MF and Beaumont, PWR and Gibson, LJ and Gilbert, DG and Maiti, SK (1985) Deformation mechanism maps for cellular materials and solid polymers. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Bressan, JD and Williams, JA (1985) Limit strains in the sheet forming of strain and strain-rate sensitive materials. Journal of Materials Processing Technology, 11. 291-. ISSN 0924-0136

Brown, DJ and Gilbert, DG and Beaumont, PWR and Nixon, WC and Windle, AH (1985) Microcracking and fracture in bulk polymers and composite films. In: The 6th International Conference on Deformation, Yield and Fracture of Polymers, -4-1985 to --, London, UK 74.1-74.4..

Evans, AG and Ahmad, ZB and Gilbert, DG and Beaumont, PWR (1985) Mechanisms of toughening in rubber toughened polymers. In: The 2nd International Conference on the Toughening of Plastics, -7-1985 to -- p.1611-..

Evans, AG and Williams, S and Beaumont, PWR (1985) On the toughness of particulate filled polymers. Journal of Materials Science, 20. pp. 3668-3674. ISSN 0022-2461

Fleck, NA (1985) Fatigue crack growth due to periodic underloads and overloads. Acta Metallurgica, 33. pp. 1339-1354. ISSN 0001-6160

Fleck, NA and Shin, S and Smith, RA (1985) Fatigue crack growth under compressive loading. Engineering Fracture Mechanics, 21. pp. 173-185. ISSN 0013-7944

Ogin, SL and Smith, PA and Beaumont, PWR (1985) Matrix cracking and stiffness reduction during the fatigue of a (0/90)s GFRP laminate. Composites Science and Technology, 22. pp. 23-31. ISSN 0266-3538

Ogin, SL and Smith, PA and Beaumont, PWR (1985) A stress intensity factor approach to the fatigue growth of transverse ply cracks. Composites Science and Technology, 24. pp. 47-59. ISSN 0266-3538

Wells, JK and Beaumont, PWR (1985) Debonding and pull-out processes in fibrous composites. Journal of Materials Science, 20. pp. 1275-1284. ISSN 0022-2461

1984

Evans, AG and Palmer, AC and Goodman, DJ and Ashby, MF and Hutchinson, JW and Ponter, ARS and Williams, GJ (1984) Indentation spalling of edge-loaded ice sheets. In: Ice: the 7th International Symposium of the International Association for Hydraulic Research, -8-1984 to --, Hamburg, Germany pp. 113-121..

Evans, AG and Williams, S and Beaumont, PW (1984) On the toughness of particulate filled polymers. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Fleck, NA (1984) Fatigue crack growth - the complications. In: The Conference on Fatigue Crack Growth : 30 Years of Progress, -9-1984 to --, Cambridge, UK -..

Fleck, NA (1984) Influence of stress state of crack growth retardation. In: Basic Questions in Fatigue : the International Symposium on Fundamental Questions and Critical Experiments on Fatigue, -10-1984 to --, Dallas, TX, US pp. 157-183..

Fleck, NA (1984) An investigation of fatigue crack closure. PhD thesis, UNSPECIFIED.

Fleck, NA and Smith, RA (1984) DISCUSSION OF MECHANISMS OF ACCELERATED AND RETARDED FATIGUE CRACK GROWTH. pp. 1823-1829.

Fleck, NA and Smith, RA (1984) Fatigue life prediction of a structural steel under service loading. International Journal of Fatigue, 6. pp. 203-210. ISSN 0142-1123

Gilbert, DG and Ashby, MF and Beaumont, PW (1984) Deformation maps for amorphous polymers. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Gilbert, DG and Beaumont, PWR and Nixon, WC (1984) Direct observations of dynamic fracture mechanisms in polymeric materials. Journal of Materials Science Letters, 3. pp. 961-964. ISSN 0261-8028

Itoh, F and Cooper, MJ and Holt, RS and Laundy, D and Cardwell, DA and Kawamiya, N (1984) Compton profile anisotropy in Ni3Ga. Philosophical Magazine A: Physics of Condensed Matter Structure Defects and Mechanical Properties, 50. pp. 703-709. ISSN 0141-8610

Ogin, SL and Smith, PA and Beaumont, PWR (1984) Transverse ply crack growth and associated stiffness reduction during the fatigue of a simple crossply laminate. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Poursatip, A and Ashby, MF and Beaumont, PVR (1984) The fatigue damage mechanics of fibrous composites. In: Polymer NDE: the European Workshop on Nondestructive Evaluation of Polymers and Matrix Composites, 4-9-1984 to 5-9-1984, Termar do Vimeiro, Portugal pp. 250-260..

Wells, JK and Beaumont, PWR (1984) Crack tip energy absorption processes in fibre composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Wells, JK and Beaumont, PWR (1984) Debonding and pull-out processes in fibrous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

1983

Anstice, PD and Beaumont, PWR (1983) Direct observations of the failure and toughness of hybrid composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Anstice, PD and Beaumont, PWR (1983) Direct observations of the failure and toughness of hybrid composites. Journal of Materials Science Letters, 2. pp. 617-622. ISSN 0261-8028

Anstice, PD and Beaumont, PWR (1983) Hygrothermal ageing and fracture of glass fibre-epoxy composites. Journal of Materials Science, 18. pp. 3404-3408. ISSN 0022-2461

Anstice, PD and Beaumont, PWR (1983) Hygrothermal aging and fracture of glass fibre-epoxy composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR and Wells, JK (1983) Origins of the toughness of fibrous composites. In: The European Meeting on Polymer Processing and Properties, 13-6-1983 to 16-6-1983, Capri, Italy pp. 328-336..

Bressan, JD and Williams, JA (1983) Relationship between the coefficients of normal anisotropy in the plastic behaviour of sheet metals. International Journal of Engineering Science, 21. pp. 847-849. ISSN 0020-7225

Bressan, JD and Williams, JA (1983) The use of a shear instability criterion to predict local necking in sheet metal deformation. International Journal of Mechanical Sciences, 25. pp. 155-168. ISSN 0020-7403

Fleck, NA (1983) Some aspects of clip gauge design. Strain, 19. pp. 17-26. ISSN 0039-2103

Fleck, NA and Hooley, T (1983) Development of low cost computer control. In: SEECO'83: The International Conference on Digital Techniques in Fatigue, -3-1983 to --, Cambridge, MA, US pp. 309-316..

Fleck, NA and Smith, IFC and Smith, RA (1983) Closure behaviour of surface cracks. Fatigue of Engineering Materials and Structures, 6. p.225-. ISSN 8756-758X

Fleck, NA and Smith, RA (1983) Accelerated fatigue crack growth in a low strength steel. In: SEECO'83: The International Conference on Digital Techniques in Fatigue, -3-1983 to --, Cambridge, UK pp. 190-196..

Gilbert, DG and Beaumont, PWR and Nixon, WC (1983) Direct observations of the micromechanisms of fracture in polymeric solids using the scanning electron microscope. In: 4th International Conference on Mechanical Behaviour of Materials, 15-8-1983 to 19-8-1983, Stockholm, Sweden pp. 705-710..

Mao, TH and Beaumont, PWR and Nixon, WC (1983) Direct observations of crack propagation in brittle materials. Journal of Materials Science Letters, 2. pp. 613-616. ISSN 0261-8028

Mao, TH and Beaumont, PWR and Nixon, WC (1983) Direct observations of crack propagation in brittle materials. Acta Materiae Compositae Sinica / Fuhe Cailiao Xuebao. ISSN 1000-3851

1982

Anstice, PD and Beaumont, PWR (1982) Hygrothermal ageing of fibrous composites. In: The 4th International Conference on Composite Materials (ICCM4), 25-10-1982 to 28-10-1982, Tokyo, Japan pp. 1001-1008..

Beaumont, PWR and Wells, JK and Anstice, PD (1982) Development of fracture maps for fibrous composites. In: The 37th Annual Conference of the Reinforced Plastics/Composites Institute: Session 20A, -1-1982 to --, Washington D.C. pp. 1-6..

Fleck, NA and Smith, RA (1982) Crack closure - is it just a surface phenomenon? International Journal of Fatigue, 4. pp. 157-160. ISSN 0142-1123

Frost, HJ and Ashby, MF (1982) Deformation mechanism maps: the plasticity and creep of metals and ceramics. Pergamon Press, Oxford, UK.

Poursartip, A and Ashby, MF and Beaumont, PWR (1982) Damage accumulation during fatigue of composites. In: The 4th International Conference on Composite Materials (ICCM4), 25-10-1982 to 28-10-1982, Tokyo, Japan pp. 693-700..

Poursartip, A and Ashby, MF and Beaumont, PWR (1982) Damage accumulation during fatigue of composites. Scripta Metallurgica, 16. pp. 601-606. ISSN 1359-6462

Poursartip, A and Beaumont, PWR (1982) A damage approach to the fatigue of composites. In: The IUTAM Symposium on the Mechanics of Composite Materials, -8-1982 to -- pp. 449-456..

Pousartip, A and Ashby, MF and Beaumont, PWR (1982) Damage accumulation in composites during fatigue. In: The 3rd RISØ International Symposium on Fatigue and Creep of Composite Materials, 6-9-1982 to 10-9-1982, Roskilde, Denmark pp. 279-284..

Wells, JK and Beaumont, PWR (1982) Correlations for the fracture of composite materials. Scripta Metallurgica, 16. pp. 99-103. ISSN 1359-6462

Wells, JK and Beaumont, PWR (1982) Use of fracture maps in a failure analysis of fibre composite materials. In: The 5th International Conference on Deformation, Yield and Fracture of Polymers, 29-3-1982 to 1-4-1982, Cambridge, UK.

Williams, JA (1982) On the influence of strain dependence in the deformation of superplastic materials. Journal of Mechanical Working Technology, 7. pp. 11-22. ISSN 0378-3804

Williams, JA and Horne, JG (1982) Crystallographic effects in metal cutting. Journal of Materials Science, 17. pp. 2618-2624. ISSN 0022-2461

1981

Anstice, PD and Beaumont, PWR (1981) Hygrothermal ageing effects on the micromechanisms of crack extension in glass fibre and carbon fibre composites. In: The 5th International Conference on Fracture (ICF5), 29-3-1981 to 3-4-1981, Cannes, France pp. 473-483..

Beaumont, PWR (1981) Failure of fibrous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR (1981) Micromechanisms of fracture and hygrothermal aging of fibrous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Fleck, NA and Smith, RA (1981) Effect of density on tensile strength, fracture toughness, and fatigue crack propagation behaviour of sintered steel. Powder Metallurgy, 3. pp. 121-125. ISSN 0032-5899

Fleck, NA and Smith, RA (1981) Use of simple models to estimate the effect of density on fracture behaviour of sintered steel. Powder Metallurgy, 3. pp. 126-130. ISSN 0032-5899

Kunz, SC and Beaumont, PWR (1981) Low temperature behavior of epoxy-rubber particulate composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kunz, SC and Beaumont, PWR (1981) Low-temperature behaviour of epoxy-rubber particulate composites. Journal of Materials Science, 16. pp. 3141-3152. ISSN 0022-2461

Magarey, A and Beaumont, PWR (1981) Damage accumulation during fatigue of composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Mao, TH and Beaumont, PWR and Nixon, WC (1981) Crack propagation in fibrous and particulate composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Poursartnip, A and Ashby, MF and Beaumont, PWR (1981) The fatigue damage-mechanics of carbon-fibre reinforced laminates. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Wells, JK and Beaumont, PWR (1981) Construction and use of toughness maps in a fracture analysis of the micromechanies of composite failure. In: The 6th ASTM Conference on Composite Materials: Testing and Design, -5-1981 to --, Phoenix, AZ, USA pp. 147-162..

Wells, JK and Beaumont, PWR (1981) Correlations for the fracture of composite materials. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Wells, JK and Beaumont, PWR (1981) The construction and use of toughness maps in a fracture analysis of the micromechanics of a composite failure. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

1980

Anstice, PD and Beaumont, PWR (1980) Hygrothermal effects on the micromechanisms of cork extension in glass fibre and carbon fibre composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR and Anstice, PD (1980) A failure analysis of the micromechanisms of fracture of carbon fibre and glass fibre composites in monotonic loading. Journal of Materials Science, 15. pp. 2619-2635. ISSN 0022-2461

Kunz Douglass, S and Beaumont, PWR and Ashby, MF (1980) A model for the toughness of epoxy-rubber particulate composite. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kunz Douglass, SC and Beaumont, PWR and Ashby, MF (1980) A model for the toughness of epoxy-rubber particulate composites. Journal of Materials Science, 15. pp. 1109-1123. ISSN 0022-2461

Owen, AB and Beaumont, PWR (1980) Fracture of surgical acrylic bone cement. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Russell, DP and Beaumont, PWR (1980) Structure and properties of injection moulded nylon-6. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Russell, DP and Beaumont, PWR (1980) Structure and properties of injection-moulded nylon-6 (part 1). Journal of Materials Science, 15. pp. 197-207. ISSN 0022-2461

Russell, DP and Beaumont, PWR (1980) Structure and properties of injection-moulded nylon-6 (part 2). Journal of Materials Science, 15. pp. 208-215. ISSN 0022-2461

Russell, DP and Beaumont, PWR (1980) Structure and properties of injection-moulded nylon-6 (part 3). Journal of Materials Science, 15. pp. 216-221. ISSN 0022-2461

1979

Anstice, PD and Beaumont, PWR (1979) Micromechanisms of fracture of fibrous composites in monotonic loading. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR (1979) Fracture mechanisms in fibrous composites. In: The Symposium on Fracture Mechanics - Current Status, Future Prospects, 16-3-1979 to --, Cambridge, UK pp. 211-233..

Beaumont, PWR (1979) Fracture processes in acrylic bone cement containing barium sulphate dispersions. Journal of Biomedical Engineering, 1. pp. 147-152. ISSN 0141-5425

Beaumont, PWR (1979) Modelling microfracture processes in fibrous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Munro, M and Beaumont, PWR (1979) Fracture mechanisms and toughening of fibre composites. In: The 3rd International Conference on the Mechanical Behaviour of Materials (ICM-3), -8-1979 to --, Cambridge, UK pp. 253-261..

Owen, AB and Beaumont, PWR (1979) Fracture behaviour of commercial surgical acrylic bone cements. Journal of Biomedical Engineering, 1. pp. 277-280. ISSN 0141-5425

WILLIAMS, JA and STOBBS, WM (1979) CHANGES IN MODE OF CHIP FORMATION AS FUNCTION OF PRESENCE OF OXYGEN. MET TECHNOL, 6. pp. 424-432. ISSN 0307-1693

Williams, JA and Stobbs, WM (1979) Changes in the mode of chip formation as a function of presence of oxygen. Metals Technology, 6. pp. 424-432. ISSN 0307-1693

1978

Beaumont, PWR and Aleszka, JC (1978) Cracking and toughening of concrete and polymer-concrete dispersed with short steel wires. Journal of Materials Science, 13. pp. 1749-1760. ISSN 0022-2461

Kunz, SC and Beaumont, PWR and Ashby, MF (1978) Toughening of epoxy-rubber particulate composites. In: International Conference on Toughening of Plastics, 4-7-1978 to 6-7-1978, London, UK 15.1-15.10..

1977

Beaumont, PWR (1977) Crack growth in acrylic bone cement. In: The 3rd Annual Meeting of the Society for Biomaterials and the 9th Annual International Biomaterials Symposium, --1977 to --, New Orleans, USA p.55-..

Beaumont, PWR (1977) Cracking and toughness of concrete and polymer-concrete dispersed with short steel wires. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR (1977) The strength of acrylic bone cements and acrylic cement-stainless steel interfaces (part 1). Journal of Materials Science, 12. pp. 1845-1852. ISSN 0022-2461

Beaumont, PWR and Joliffe, V and Gore, D (1977) Fracture of particulate composites based on PMMA. In: The 4th International Conference on Fracture: Advances in Research on the Strength and Fracture of Materials, -6-1977 to --, Waterloo, Canada pp. 1015-1023..

Beaumont, PWR and Kirk, JN and Munro, M (1977) Improving the impact and fracture resistance of fibrous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR and Plumpton, B (1977) The strength of acrylic bone cements and acrylic cement-stainless steel interfaces (part 2). Journal of Materials Science, 12. pp. 1853-1856. ISSN 0022-2461

Beaumont, PWR and Young, RJ (1977) Failure of brittle polymers by slow crack growth (part 3). Journal of Materials Science, 12. pp. 684-692. ISSN 0022-2461

Beaumont, PWR and Young, RJ (1977) Strength and fracture of Acrylic bone cement and cement-metal interfaces. Plastics and Rubber: Materials and Applications, Februa. pp. 2-6. ISSN 0307-9414

Williams, JA (1977) Deformation diagrams of chip forming mechanisms. Journal of Materials Science, 12. pp. 621-624. ISSN 0022-2461

Williams, JA (1977) The action of lubricants in metal cutting. Journal of Mechanical Engineering Science, 19. pp. 202-212. ISSN 0022-2542

Williams, JA and Gane, N (1977) Some observations on the flow stress of metals during metal cutting. Wear, 42. pp. 341-353. ISSN 0043-1648

Williams, JA and Tabor, D (1977) The role of lubricants in machining. Wear, 43. pp. 275-292. ISSN 0043-1648

1976

Beaumont, PWR and Martin, V (1976) Improving the impact and fracture resistance of fibrous composites: final technical report. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Stobbs, W and Kallend, J and Williams, JA (1976) Deformation behaviour of copper in ultramicrotomy. Acta Materialia, 24. pp. 1083-1093. ISSN 1359-6454

Young, RJ and Beaumont, PWR (1976) Crack propagation and arrest in epoxy resins. Journal of Materials Science, 11. pp. 776-779. ISSN 0022-2461

Young, RJ and Beaumont, PWR (1976) Slow crack growth in epoxy and epoxy composites. In: The 21st SAMPE Bicentennial of Materials Progress, -4-1976 to --, Los Angeles, USA pp. 885-894..

Young, RJ and Beaumont, PWR (1976) Time dependent failure of PMMA. In: The 2nd International Conference on the Mechanical Behaviour of Materials, 16-8-1976 to 20-8-1976, Boston, MA, USA.

Young, RJ and Beaumont, PWR (1976) Time-dependent failure of poly(methyl methacrylate). Polymer, 17. pp. 717-722. ISSN 0032-3861

1975

Beaumont, PWR (1975) Improving the impact and fracture resistance of fibrous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR and Kunz, SC and Munro, M (1975) Compressive fatigue of carbon fibre reinforced plastics. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR and Riewald, PG and Zweben, C (1975) Methods for improving the impact resistance of composite materials. In: The ASTM Symposium on Foreign Object Impact Damage to Composites, -9-1973 to --, Philadelphia, USA pp. 134-158..

Beaumont, PWR and Young, RJ (1975) Failure of brittle polymers by slow crack growth (part 1). Journal of Materials Science, 10. pp. 1334-1342. ISSN 0022-2461

Beaumont, PWR and Young, RJ (1975) Failure of brittle polymers by slow crack growth (part 2). Journal of Materials Science, 10. pp. 1343-1350. ISSN 0022-2461

Beaumont, PWR and Young, RJ (1975) Slow crack growth in acrylic bone cement. Journal of Biomedical Materials Research, 9. pp. 423-439. ISSN 0021-9304

Beaumont, PWR and Young, RJ (1975) Strength and fracture of acrylic bone cement and acrylic cement-metal interfaces. In: The 2nd Conference on Plastics in Medicine and Surgery, 24-9-1975 to 25-9-1975, Glasgow, UK pp. 1-10..

Young, RJ and Beaumont, PWR (1975) Failure mechanisms in glass filled epoxy resin composites. In: The 1st International Conference on Composite Materials (ICCM-1), 7-4-1975 to 11-4-1975, Geneva, Switzerland pp. 1085-1105..

1974

Beaumont, PWR (1974) A fracture mechanics approach to failure in fibrous composites. Journal of Adhesion, 6. pp. 107-137. ISSN 0021-8464

Beaumont, PWR and Server, WL (1974) Some observations on the dynamic fracture behaviour of carbon fiber-strengthened epoxy resin. In: The ASTM Symposium on Composite Reliability, 15-4-1974 to 16-4-1974, Las Vegas, Nevada, USA.

1973

Kunz, SC and Beaumont, PWR (1973) Microcrack growth in graphite-epoxy resin systems during compressive fatigue. In: The ASTM Symposium on the Fatigue of Composite Materials, -12-1973 to --, Bal Harbour, FL, USA pp. 71-91..

1972

Beaumont, PWR and Harris, B (1972) The energy of crack propagation in carbon fibre-reinforced resin systems. Journal of Materials Science, 7. pp. 1265-1279. ISSN 0022-2461

Beaumont, PWR and Phillips, DC (1972) Tensile strengths of notched composites. Journal of Composite Materials, 6. pp. 32-46. ISSN 0021-9983

Beaumont, PWR and Phillips, DC (1972) The fracture energy of a glass fibre composite. Journal of Materials Science, 7. pp. 682-686. ISSN 0022-2461

Beaumont, PWR and Tetelman, AS (1972) The fracture strength and toughness of fibrous composites. In: The Annual Spring Meeting of AIME: Failure Modes in Composites, -5-1972 to --, Boston, MA.

FitzRandolph, J and Phillips, DC and Beaumont, PWR and Tetelman, AS (1972) The fracture energy and acoustic emission of a boron-epoxy composite. Journal of Materials Science, 7. pp. 289-294. ISSN 0022-2461

1971

B, H and P W R, B and E, MDF (1971) Strength and fracture toughness of carbon fibre polyester composites. Journal of Materials Science, 6. pp. 238-251. ISSN 0022-2461

FitzRandolph, J and Phillips, DC and Beaumont, PWR (1971) Acoustic emission studies of a Boron-epoxy composite. Journal of Composite Materials, 5. pp. 542-548. ISSN 0021-9983

1969

Harris, B and Beaumont, PWR and Rosen, A (1969) Silane coupling in carbon fibre-reinforced polyester resin. Journal of Materials Science, 4. pp. 432-438. ISSN 0022-2461

NULL

Bannister, M and Shercliff, HR and Bao, G and Zok, F and Ashby, MF Toughening in brittle systems by ductile bridging ligaments. Acta metall. mater., 40. pp. 1531-1537. (Unpublished)

Barlow, CY and Ashby, MF and Shercliff, HR Energy materials as systems. In: 29th Risoe International Symposium on Materials Science, 1-9-2008 to 5-9-2008, Risoe, Denmark. (Unpublished)

Baxter, GJ and Duly, D and Orsetti Rossi, PL and Sellars, CM and Whiteman, JA and Shercliff, HR Microstructural evolution and recrystallisation in hot worked Al-1% Mg alloy. In: 16th Risø Int. Symposium on Materials Science, -9-1995 to --, Roskilde, Denmark pp. 267-272.. (Unpublished)

Bratland, DH and Grong, O and Shercliff, HR and Myhr, OR Modelling of the quench sensitivity of aluminium alloy AA6082. In: COMMP '93 (Int. Conf. on Computer-Assisted Materials Design and Process Simulation), -9-1993 to --, Tokyo, Japan pp. 135-140.. (Unpublished)

Bratland, DH and Grong, O and Shercliff, HR and Tjotta, S and Myhr, OR Process model based optimisation of cooling schedules for AA6082 extrusions. In: ICAA4 (4th International Conference on Aluminium Alloys), -9-1994 to --, Atlanta, USA. (Unpublished)

Colegrove, PA and Shercliff, HR and Robson, JD and Kamp, N and Sullivan, A and Williams, SW Integrated process modelling of friction stir welding. In: Mathematical Modelling of Weld Phenomena 8, -9-2007 to --, Graz, Austria pp. 469-484.. (Unpublished)

Feih, S and Shercliff, HR and McGrath, G 3D progressive damage modelling for adhesively bonded composite peel joints: implementation in a UMAT and related compuational issues. In: ABAQUS Users Conference, -8-2000 to --, Warrington, UK. (Unpublished)

Feih, S and Shercliff, HR and McGrath, G Optimisation of peel joint geometries in CFRP laminates under static loading with regard to first and final failure. In: ECCM-9 (9th European Conference on Composite Materials), -4-2000 to --, Brighton, UK. (Unpublished)

Ion, JC and Shercliff, HR and Ashby, MF A chart for laser processing of metallic alloys. In: Mat Tech 90, -6-1990 to --, Helsinki, Finland. (Unpublished)

Kaute, DAW and Ashby, MF and Shercliff, HR Toughening mechanisms in delamination of ceramic matrix composites. In: ECCM-6 (6th European Conference on Composite Materials), -9-1993 to --, Bordeaux, France pp. 483-490.. (Unpublished)

UNSPECIFIED Sandwich material. CA2364364.

Russell, MJ and Shercliff, HR Analytical modelling of friction stir welding. In: INALCO '98 (Int. Conf. on Joining in Aluminium Structures), -4-1998 to --, TWI, Abington, UK. (Unpublished)

Russell, MJ and Shercliff, HR Analytical modelling of microstructure development in friction stir welding. In: 1st Int. Symp. On Friction Stir Welding, -6-1999 to --, Thousand Oaks, California. (Unpublished)

Sargent, PM and Shercliff, HR and Wood, RL Modelling materials processing. In: COMMP '93 (Int. Conf. on Computer-Assisted Materials Design and Process Simulation), -9-1993 to --, Tokyo, Japan pp. 474-479.. (Unpublished)

Shercliff, HR and Withers, PJ and Lovatt, AM and Barat, P Advanced statistical modelling applied to recrystallisation of hot-worked Al-Mg alloy. In: 21st Risø Int. Symposium on Materials Science, -9-2000 to --, Roskilde, Denmark pp. 575-580.. (Unpublished)

Sun, X and Trusty, PA and Yeomans, JA and Shercliff, HR The fabrication and properties of alumina-ductile metal particle composites. In: ICCM7 (7th International Conference on Composite Materials), -7-1991 to --, Hawaii, USA. (Unpublished)

Wegst, UGK and Shercliff, HR and Ashby, MF The mechanical efficiency of bamboo and palm. In: Interdisciplinary Colloquium on Plant Biomechanics, -9-1994 to --, Montpellier, France. (Unpublished)

Wegst, UGK and Shercliff, HR and Ashby, MF The structure and properties of bamboo as an engineering material. In: 3rd. Int. Symp.of the Sondersforschungsbereich 230 ("Evolution of Natural Structures"), -10-1994 to --, Stuttgart, Germany pp. 209-213.. (Unpublished)

This list was generated on Wed Jan 16 19:34:28 2013 GMT.