Article

Threadgill, PL and Leonard, AJ and Shercliff, HR and Withers, PJ (2009) Friction stir welding of aluminium alloys. INT MATER REV, 54. pp. 49-93. ISSN 0950-6608

Colegrove, PA and Shercliff, HR and Zettler, R (2007) Model for predicting heat generation and temperature in friction stir welding from the material properties. SCI TECHNOL WELD JOI, 12. pp. 284-297. ISSN 1362-1718

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Miller, DB (2006) Experimental investigation of roughening of the matt surface in pack rolling. Journal of Materials Processing Technology, 177. pp. 501-504.

Colegrove, PA and Shercliff, HR (2006) CFD modelling of friction stir welding of thick plate 7449 aluminium alloy. Science and Technology of Welding and Joining, 11. pp. 429-441. ISSN 1362-1718

Peel, M and Steuwer, A and Withers, PJ and Dickerson, TL and Shi, Q and Shercliff, HR (2006) Dissimilar friction stir welds in AA5083-AA6082: Part I - Process parameter effects on thermal history and weld properties. Metallurgical and Materials Transactions A, 37. pp. 2183-2193.

Beaumont, PWR and Dimant, RA and Shercliff, HR (2006) Failure processes in composite materials: getting physical. Journal of Materials Science, 41. pp. 6526-6546. ISSN 0022-2461

Preston, RV and Shercliff, HR and Withers, PJ and Hughes, D and Smith, SD and Webster, PJ (2006) Synchrotron X-ray measurement and finite element analysis and of residual strain in TIG welded aluminium alloy 2024. Metallurgical and Materials Transactions A, 37. pp. 3629-3637.

Colegrove, PA and Shercliff, HR (2005) 3-dimensional CFD modelling of flow round a threaded friction stir welding tool profile. Journal of Materials Processing Technology, 169. pp. 320-327.

Feih, S and Shercliff, HR (2005) Adhesive and composite failure prediction of single-L joint structures under tensile loading. International Journal of Adhesion and Adhesives, 25. pp. 47-59. ISSN 0143-7496

Feih, S and Shercliff, HR (2005) Composite failure prediction of single-L joint structures under bending. Composites Part A: Applied Science and Manufacturing, 36. pp. 381-395. ISSN 1359-835X

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, P and Miller, DB (2005) Influence of friction on roughening of the matt surface in aluminium pack rolling. International Journal of Machine Tools and Manufacture, 45. pp. 803-809. ISSN 0890-6955

Rentzsch, W and Shercliff, HR and Brechet, Y and Legras, L (2005) Knowledge management for materials processing. Advanced Engineering Materials, 7. pp. 30-39. ISSN 1438-1656

Shercliff, HR and Russell, MJ and Taylor, A and Dickerson, TL (2005) Microstructural modelling in friction stir welding of 2000 series aluminium alloys. Mecanique et Industries, 6. pp. 25-35. ISSN 1296-2139

Feih, S and Shercliff, HR (2005) Quality assessment of curved composite components in peel joint structures. Composites A: Applied Science and Manufacturing, 36. pp. 397-408. ISSN 1359-835X

Preston, RV and Shercliff, HR and Withers, PJ and Smith, SD (2004) Physically-based constitutive modelling of residual stress development in welding of aluminium alloy 2024. Acta Materialia, 52. pp. 4973-4983. ISSN 1359-6454

Colegrove, PA and Shercliff, HR (2004) 2-Dimensional CFD modelling of flow round profiled FSW tooling. Science and Technology of Welding and Joining, 9. pp. 483-492.

Feih, S and Shercliff, HR (2004) Adhesive and composite failure prediction of single-L joint structures under tensile loading. International Journal of Adhesion and Adhesives, 25. pp. 47-59.

Colegrove, PA and Shercliff, HR (2004) Development of the Trivex friction stir welding tool: Part I – 2- Dimensional flow modelling and experimental validation. Science and Technology of Welding and Joining, 9. pp. 345-351.

Colegrove, PA and Shercliff, HR (2004) Development of the Trivex friction stir welding tool: Part II – 3 - Dimensional flow modelling. Science and Technology of Welding and Joining, 9. pp. 352-361.

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2004) Evolution of matt surface topography in aluminium pack rolling: Part I – model development. International Journal of Mechanical Sciences, 46. pp. 1349-1364. ISSN 0020-7403

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2004) Evolution of matt surface topography in aluminium pack rolling: Part II – effect of material properties. International Journal of Mechanical Sciences, 46. pp. 1365-1375. ISSN 0020-7403

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2004) Three-dimensional topography of the matt surface in aluminium pack rolling. International Journal of Mechanical Sciences, 46. pp. 1083-1096. ISSN 0020-7403

Colegrove, PA and Shercliff, HR (2003) Experimental and numerical analysis of aluminium alloy 7075-T7351 friction stir welds. SCI TECHNOL WELD JOI, 8. pp. 360-368. ISSN 1362-1718

Preston, RV and Shercliff, HR and Withers, PJ and Smith, SD (2003) Finite element modelling of tungsten inert gas welding of aluminium alloy 2024. Science and Technology of Welding and Joining, 8. pp. 10-18. ISSN 1362-1718

Steuwer, A and Peel, M and Withers, PJ and Dickerson, TL and Shi, Q and Shercliff, HR (2003) Measurement and prediction of residual stresses in aluminium friction stir welds. Journal of Neutron Research, 11. pp. 267-272. ISSN 1023-8166

Owen, RA and Preston, RV and Withers, PJ and Shercliff, HR and Webster, PJ (2003) Neutron and synchrotron measurements of residual strain in TIG welded aluminium alloy 2024. Materials Science and Engineering A, 346. pp. 159-167. ISSN 0921-5093

Ch-A, G and Y, B and M, R and G, C and M F, A and H R, S (2002) Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys. Acta Materialia, 50. pp. 901-927. ISSN 1359-6454

Dimant, RA and Shercliff, HR and Beaumont, PWR (2002) Evaluation of a damage-mechanics approach to the modelling of notched strength in KFRP and GRP cross-ply laminates. Composites Science and Technology, 62. pp. 255-263. ISSN 0266-3538

Webster, PJ and Ananthaviravakumar, N and Hughes, DJ and Mills, D and Preston, RV and Shercliff, HR and Withers, PJ (2002) Measurement and modelling of residual stresses in a TIG weld. Applied Physics A: Materials Science and Processing, 74. S1421-S1423. ISSN 0947-8396

Grong, O and Shercliff, HR (2002) Microstructural modelling in metals processing. Progress in Materials Science, 47. pp. 163-282. ISSN 0079-6425

Shercliff, HR (2002) Modelling and selection of surface treatments for steels. Advanced Engineering Materials, 4. pp. 397-402. ISSN 1438-1656

LeBacq, C and Brechet, Y and Shercliff, HR and Jeggy, T and Salvo, L (2002) Selection of joining methods in mechanical design. Materials and Design, 23. pp. 405-416. ISSN 0261-3069

Shercliff, HR and Fleck, NA (2001) Ashby Festschrift - Preface. PROG MATER SCI, 46. pp. 187-189. ISSN 0079-6425

Shercliff, HR and Lovatt, AM (2001) Selection of manufacturing processes in design and the role of process modelling. Progress in Materials Science, 46. pp. 429-459. ISSN 0079-6425

Furu, T and Shercliff, HR and Baxter, GJ and Sellars, CM (1999) The influence of transient deformation conditions on recrystallization during thermomechanical processing of an Al-1% Mg alloy. ACTA MATER, 47. pp. 2377-2389. ISSN 1359-6454

Ashby, MF and Humphreys, FJ and Sellars, CM and Shercliff, HR and Stowell, MJ (1999) Deformation processing of metals. PHILOS T ROY SOC A, 357. pp. 1443-1445. ISSN 1364-503X

Shercliff, HR and Lovatt, AM (1999) Modelling of microstructure evolution in hot deformation. PHILOS T ROY SOC A, 357. pp. 1621-1642. ISSN 1364-503X

Lovatt, AM and Bassetti, D and Shercliff, HR and Brechet, Y (1999) Process and alloy selection for aluminium casting. International Journal of Cast Metals Research, 12. pp. 211-225. ISSN 1364-0461

Preston, RV and Smith, SD and Shercliff, HR and Withers, PJ (1999) An investigation into the residual stresses in an aluminium 2024 test weld. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 393. pp. 265-277. ISSN 0277-027X

Lovatt, AM and Shercliff, HR (1998) Manufacturing process selection in engineering design. Part 1: the role of process selection. MATER DESIGN, 19. pp. 205-215. ISSN 0261-3069

Lovatt, AM and Shercliff, HR (1998) Manufacturing process selection in engineering design. Part 2: a methodology for creating task-based process selection procedures. MATER DESIGN, 19. pp. 217-230. ISSN 0261-3069

Poole, WJ and Shercliff, HR and Castillo, T (1997) Process model for two step age hardening of 7475 aluminium alloy. MATER SCI TECH SER, 13. pp. 897-904. ISSN 0267-0836

Bratland, DH and Grong, O and Shercliff, HR and Myhr, OR and Tjotta, S (1997) Modelling of precipitation reactions in industrial processing. Acta Materialia, 45. pp. 1-22.

Duly, D and Baxter, GJ and Shercliff, HR and Whiteman, JA and Sellars, CM and Ashby, MF (1996) Microstructure and local crystallographic evolution in an Al-1 wt% Mg alloy deformed at intermediate temperature and high strain-rate. ACTA MATER, 44. pp. 2947-2962. ISSN 1359-6454

KAUTE, DAW and SHERCLIFF, HR and ASHBY, MF (1995) MODELING OF FIBER BRIDGING AND TOUGHNESS OF CERAMIC-MATRIX COMPOSITES. SCRIPTA METALL MATER, 32. pp. 1055-1060. ISSN 0956-716X

Gibson, LJ and Ashby, MF and Karam, GN and Wegst, UGK and Shercliff, HR (1995) The mechanical properties of natural materials, II. Microstructures for mechanical efficiency. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 450. pp. 141-162. ISSN 1364-5021

SHERCLIFF, H and VEKINIS, G and Beaumont, PWR (1994) DIRECT OBSERVATION OF THE FRACTURE OF CAS-GLASS SIC COMPOSITES .2. NOTCHED TENSION. J MATER SCI, 29. pp. 4184-4190. ISSN 0022-2461

SHERCLIFF, HR and MYHR, OR and TJOTTA, S (1994) MODELING THE PROCESSING OF ALUMINUM-ALLOYS. MRS BULL, 19. pp. 25-28. ISSN 0883-7694

Karam, GN and Wegst, UGK and Shercliff, HR and Ashby, MF and Gibson, LJ (1994) Biomimicking of natural cellular materials. American Society of Mechanical Engineers, Bioengineering Division (Publication) BED, 28.

Shercliff, HR and Ashby, MF (1994) Design with metal matrix composites. Materials Science and Technology, 10. pp. 443-451. ISSN 0267-0836

Shercliff, HR and Vekinis, G and Beaumont, PWR (1994) Direct observation of the fracture of CAS-Glass/SiC composites: Part I - Delamination. Journal of Materials Science, 29. pp. 3643-3652. ISSN 0022-2461

KAUTE, DAW and SHERCLIFF, HR and ASHBY, MF (1993) DELAMINATION, FIBER BRIDGING AND TOUGHNESS OF CERAMIC-MATRIX COMPOSITES. ACTA METALL MATER, 41. pp. 1959-1970. ISSN 0956-7151

Vekinis, G and Ashby, MF and Shercliff, HR and Beaumont, PWR (1993) The micromechanics of fracture of alumina and a ceramic-based fibre composite: Modelling the failure processes. Composites Science and Technology, 48. pp. 325-330.

ION, JC and SHERCLIFF, HR and ASHBY, MF (1992) DIAGRAMS FOR LASER MATERIALS PROCESSING. ACTA METALL MATER, 40. pp. 1539-1551. ISSN 0956-7151

JOHNSON, KL and SHERCLIFF, HR (1992) SHAKEDOWN OF 2-DIMENSIONAL ASPERITIES IN SLIDING CONTACT. INT J MECH SCI, 34. pp. 375-394. ISSN 0020-7403

SHERCLIFF, HR and ASHBY, MF (1991) THE PREDICTION OF CASE DEPTH IN LASER TRANSFORMATION HARDENING. METALL TRANS A, 22. pp. 2459-2466. ISSN 0360-2133

Vekinis, G and Shercliff, HR and Beaumont, PWR (1991) Dynamic testing of ceramics and ceramic composites in the SEM. Metals and Materials, 7. pp. 279-284. ISSN 0026-0940

Beaumont, PWR and Vekinis, G and Shercliff, HR (1991) Failure mechanisms and toughness of Al2O3 ductile-particle toughened ceramics and SiC fibre-ceramic composites. American Society of Mechanical Engineers, Aerospace Division (Publication) AD, 22. pp. 1-6. ISSN 0733-4230

SHERCLIFF, HR and ASHBY, MF (1990) A PROCESS MODEL FOR AGE HARDENING OF ALUMINUM-ALLOYS .1. THE MODEL. ACTA METALL MATER, 38. pp. 1789-1802. ISSN 0956-7151

SHERCLIFF, HR and ASHBY, MF (1990) A PROCESS MODEL FOR AGE HARDENING OF ALUMINUM-ALLOYS .2. APPLICATIONS OF THE MODEL. ACTA METALL MATER, 38. pp. 1803-1812. ISSN 0956-7151

Shercliff, HR and Fleck, NA (1990) Effect of specimen geometry on fatigue crack growth in plane strain: I. constant amplitude response. Fatigue and Fracture of Engineering Materials and Structures, 13. pp. 287-296. ISSN 8756-758X

Shercliff, HR and Fleck, NA (1990) Effect of specimen geometry on fatigue crack growth in plane strain: II. overload response. Fatigue and Fracture of Engineering Materials and Structures, 13. pp. 297-310. ISSN 8756-758X

Bannister, M and Shercliff, HR and Bao, G and Zok, F and Ashby, MF Toughening in brittle systems by ductile bridging ligaments. Acta metall. mater., 40. pp. 1531-1537. (Unpublished)

Book

Ashby, MF and Shercliff, H and Cebon, D (2009) Materials: engineering, science, processing and design. Butterworth Heinemann, -. ISBN 1856178951,9781856178952

Ashby, MF and Shercliff, HR and Cebon, D (2007) Materials: engineering, science, processing and design. Elsevier Butterworth-Heinemann.

Book Section

Shercliff, HR and Colegrove, PA (2007) Process Modeling. In: Friction Stir Welding and Processing. ASM International, USA, pp. 187-217.

Feih, S and Shercliff, HR (2004) The validation of boundary conditions for finite element analyses. In: NAFEMS Advanced Workbook of Examples and Case Studies (Volume 2). NAFEMS, East Kilbride.

Shercliff, HR and Ashby, MF (2003) Teach yourself phase diagrams. In: Handbook of Superconducting Materials. Institute of Physics, Bristol, UK, Chapter H3-.

Shercliff, HR and Ashby, MF (2000) Elastic structures in design. In: Encyclopedia of Materials: Science and Technology. Elsevier Press, Amsterdam, The Netherlands.

Shercliff, HR and Lovatt, AM and Withers, PJ (2000) Material and process selection. In: Advanced Design and Technology. Longman, Chapter 7-.

Conference or Workshop Item

Sullivan, A and Robson, JD and Shercliff, HR and McShane, G (2007) Process modelling of friction stir welding for aerospace aluminium alloys. In: 5th International Conference on Processing and Manufacturing of Advanced Materials; THERMEC 2006 Supplement, -7-2006 to --, Vancover, B.C., Canada pp. 351-356..

Robson, JD and Kamp, N and Sullivan, A and Shercliff, HR (2006) Modelling precipitate evolution during friction stir welding of aerospace aluminum alloys. In: 10th International Conference on Aluminium Alloys: Research Through Innovation and Technology, 9-7-2006 to 13-7-2006, Vancouver, B.C., Canada pp. 1101-1106..

Williams, SW and Colgrove, PA and Shercliff, HR and Prangnell, P and Robson, JD and Withers, P and Richards, D and Sullivan, A and Kamp, N and Lohwasser, D and Poad, M (2006) Integrated modelling of the friction stir welding process. In: Proceedings of the 6th International Symposium on Friction Stir Welding, 10-10-2006 to 12-10-2006, Montreal, Canada.

Utsunoyima, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2005) Evolution of matt surface topography in aluminium pack rolling. In: Proceedings of the 3rd ASME World Tribology Congress, 12-9-2005 to 16-9-2005, Washington D.C., USA pp. 813-814..

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DP (2005) Evolution of matt surface topography in aluminium pack rolling. In: 3rd Conference on World Tribology Congress, -9-2005 to --, Washington, DC, USA 63172-..

Colegrove, PA and Shercliff, HR and Hyoe, T (2004) Development of the Trivex friction stir welding tool for making lap welds. In: 5th International Friction Stir Welding Symposium, 14-9-2004 to 16-9-2004, Metz, France.

Robson, JD and Sullivan, A and Shercliff, HR and McShane, G (2004) Microstructural evolution during friction stir welding of AA7449. In: 5th International Friction Stir Welding Symposium, 14-9-2004 to 16-9-2004, Metz, France.

Colegrove, PA and Shercliff, HR (2004) Modelling the friction stir welding of aerospace alloys. In: 5th International Friction Stir Welding Symposium, 14-9-2004 to 16-9-2004, Metz, France.

Dickerson, TL and Shi, Q-Y and Shercliff, HR (2003) Heat flow into friction stir welding tools. In: 4th International Symposium on Friction Stir Welding, 14-5-2003 to 16-5-2003, Park City, UT, US.

Colegrove, PA and Shercliff, HR and Threadgill, PL (2003) Modelling and development of the Trivex friction stir welding tool. In: 4th International Symposium on Friction Stir Welding, 14-5-2003 to 16-5-2003, Park City, Utah, USA.

Shi, QY and Dickerson, TL and Shercliff, HR (2003) Thermomechanical FE modelling of friction stir welding of Al-2024 including tool loads. In: 4th International Symposium on Friction Stir Welding, 14-5-2003 to 16-5-2003, Park City, Utah, USA.

Dickerson, TL and Shercliff, HR and Schmidt, H (2003) A weld marker technique for flow visualisation in friction stir welding. In: 4th International Symposium on Friction Stir Welding, 14-5-2003 to 16-5-2003, Park City, UT, US.

Colegrove, P and Shercliff, HR (2003) 2-dimensional CFD modeling of flow round profiled FSW tooling. In: 2nd International Conference on Friction Stir Welding and Processing, -3-2003 to --, San Diego, CA, USA pp. 13-22..

Hyoe, T and Shercliff, HR and Colegrove, PA (2003) Thermal and microstructure modelling in thick plate aluminium alloy 7075 friction stir welds. In: 2nd International Conference on Friction Stir Welding and Processing, -3-2003 to --, San Diego, CA, USA pp. 33-42..

Russell, MJ and Shercliff, HR and Hyoe, T (2003) Microstructural modelling in friction stir welding of 2014-T6 aluminium alloy. In: Proceedings of the Conference of the Ecole de Mecanique des Materiaux (MECAMAT), -1-2003 to --, Aussois, France.

Crotaz, CR and Shercliff, HR and Mackay, DJC (2002) Advanced statistical modelling of processing of aluminium alloys. In: 8th International Conference on Aluminium Alloys: Their Physical and Mechanical Properties (ICAA8), 2-7-2002 to 5-7-2002, Cambridge, UK pp. 643-648..

Kennish, YC and Shercliff, HR and Mcgrath, GC (2002) Heat flow model for laser welding of polymers. In: The 60th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2002), 5-5-2002 to 9-5-2002 pp. 1132-1136..

Shi, QY and Dickerson, T and Shercliff, HR (2002) Thermo-mechanical analyses of welding aluminum alloy with TIG and friction stir welding. In: 6th International Conference on Trends in Welding Research, -4-2002 to --, Pine Mountain, GA, US pp. 247-252..

Ch-A, G and Y, B and M, R and G, C and M F, A and H R, S (2002) Modelisation de la solidification et des traitements thermiques pour la prediction de la limite d'elasticite des alliages de fonderie. In: Proceedings of the Conference of the Ecole de Mecanique des Materiaux (MECAMAT), -1-2002 to --, Aussois, France.

Shercliff, HR and Colegrove, PA (2002) Modelling of friction stir welding. In: UNSPECIFIED pp. 927-974..

Feih, S and Shercliff, HR and McGrath, G (2001) Simplifying finite element design verification of adhesively bonded composite joints by customising MSC/PATRAN and ABAQUS. In: Proceedings of the Conference ICCE-8, -7-2001 to --, Tenerife, Spain.

Gandin, CA and Brechet, Y and Rappaz, M and Canova, G and Ashby, MF and Shercliff, HR (2001) Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys. In: 7th European Conference on Advanced Materials and Processes (Euromat 2001), -6-2001 to -- 259-..

Feih, S and Shercliff, HR and McGrath, G (2001) Quality assesment and design guidelines for adhesively bonded peel-joint geometries in composite aerospace structures. In: 6th International Conference on Deformation and Fracture of Composites (DFC6), -4-2001 to --, UMIST, Manchester, UK.

Russell, MJ and Shercliff, HR and Threadgill, PL (2001) Development and application of an analytical process model for friction stir welding. In: Automotive Aluminum 2001: a Conference of the TMS Annual Meeting, -2-2001 to -- pp. 225-234..

Beaumont, PWR and Shercliff, HR and Dimant, RA and Sekine, H (2000) Physical modelling of engineering problems of composites and structures. In: 9th European Conference on Composite Materials (ECCM 9), 4-6-2000 to 7-6-2000, Brighton, UK.

Johnson, KW and Shercliff, HR and Ashby, MF (2000) Technology coupling in the design of sports equipment. In: 3rd International Sports Engineering Association Conference (ISEA 2000), 9-6-2000 to 12-6-2000, Sydney, Australia pp. 21-34..

Johnson, KW and Shercliff, HR and Ashby, MF (1999) New materials and processes in sports equipment design. In: Organisation for the Applications of Science in Sports Conference (OASIS), 13-12-1999 to --, Paris, France pp. 49-56..

Zhu, Q and Shercliff, HR and Sellars, CM (1997) Modelling hot deformation behaviour based on evolution of dislocation substructures. In: UNSPECIFIED pp. 2039-2045..

Dimant, RA and Shercliff, HR and Beaumont, PWR (1997) The micromechanics of crack growth in fibre composites: observing and modelling the failure process. In: ICCM11 (11th Int. Conf. on Composite Materials), -- to --, Brisbane, Australia.

Furu, T and Shercliff, HR and Sellars, CM and Ashby, MF (1996) Physically-based modelling of strength, microstructure and recrystallisation during thermomechanical processing of Al-Mg alloys. In: UNSPECIFIED pp. 453-458..

Poole, WJ and Shercliff, HR (1996) The effect of deformation prior to artificial ageing on the ageing characteristics of a 7475 aluminum alloy. In: UNSPECIFIED pp. 1287-1292..

Myhr, OR and Shercliff, HR and Furu, T (1996) The influence of hot-working and ageing on notched-strength and ductility of aluminium alloy AA6082. In: UNSPECIFIED pp. 1221-1226..

Vekinis, G and Ashby, MF and Shercliff, HR and Beaumont, PWR (1992) The micromechanisms of fracture of Alumina and a ceramic-based fibre composite: modelling the failure processes. In: International Conference on Microphenomena in Fibre Composites, 30-7-1992 to 1-8-1992, Ministry of Technology, Tel Aviv, Israel.

Shercliff, HR and Grong, O and Myhr, OR and Ashby, MF (1992) Process modelling applied to age hardening aluminium alloys. In: ICAA3 (3rd International Conference on Aluminium Alloys), -6-1992 to --, Trondheim, Norway.

Vekinis, G and Ashby, MF and Beaumont, PWR and Shercliff, HR (1991) Failure mechanisms of ductile particle toughened ceramics and fibre strengthened ceramic composites. In: The 112th ASME Winter Annual Meeting on Failure Mechanisms in High Temperature Composite Materials, -12-1991 to --, Atlanta, GA, USA.

SHERCLIFF, HR and ASHBY, MF (1991) MODELING THERMAL-PROCESSING OF ALUMINUM-ALLOYS. In: UNSPECIFIED pp. 85-88..

Ion, JC and Shercliff, HR and Ashby, MF (1991) A diagram for laser materials processing. In: 3rd Nordic Laser Materials Processing, -- to --, Lappeenranta, Finland.

Fleck, NA and Shercliff, HR (1989) Overload retardation due to plasticity-induced crack closure. In: ICF7 (7th International Conference on Fracture), -3-1989 to --, Houston, USA.

Feih, S and Shercliff, HR and McGrath, G 3D progressive damage modelling for adhesively bonded composite peel joints: implementation in a UMAT and related compuational issues. In: ABAQUS Users Conference, -8-2000 to --, Warrington, UK. (Unpublished)

Shercliff, HR and Withers, PJ and Lovatt, AM and Barat, P Advanced statistical modelling applied to recrystallisation of hot-worked Al-Mg alloy. In: 21st Risø Int. Symposium on Materials Science, -9-2000 to --, Roskilde, Denmark pp. 575-580.. (Unpublished)

Russell, MJ and Shercliff, HR Analytical modelling of friction stir welding. In: INALCO '98 (Int. Conf. on Joining in Aluminium Structures), -4-1998 to --, TWI, Abington, UK. (Unpublished)

Russell, MJ and Shercliff, HR Analytical modelling of microstructure development in friction stir welding. In: 1st Int. Symp. On Friction Stir Welding, -6-1999 to --, Thousand Oaks, California. (Unpublished)

Barlow, CY and Ashby, MF and Shercliff, HR Energy materials as systems. In: 29th Risoe International Symposium on Materials Science, 1-9-2008 to 5-9-2008, Risoe, Denmark. (Unpublished)

Colegrove, PA and Shercliff, HR and Robson, JD and Kamp, N and Sullivan, A and Williams, SW Integrated process modelling of friction stir welding. In: Mathematical Modelling of Weld Phenomena 8, -9-2007 to --, Graz, Austria pp. 469-484.. (Unpublished)

Baxter, GJ and Duly, D and Orsetti Rossi, PL and Sellars, CM and Whiteman, JA and Shercliff, HR Microstructural evolution and recrystallisation in hot worked Al-1% Mg alloy. In: 16th Risø Int. Symposium on Materials Science, -9-1995 to --, Roskilde, Denmark pp. 267-272.. (Unpublished)

Sargent, PM and Shercliff, HR and Wood, RL Modelling materials processing. In: COMMP '93 (Int. Conf. on Computer-Assisted Materials Design and Process Simulation), -9-1993 to --, Tokyo, Japan pp. 474-479.. (Unpublished)

Bratland, DH and Grong, O and Shercliff, HR and Myhr, OR Modelling of the quench sensitivity of aluminium alloy AA6082. In: COMMP '93 (Int. Conf. on Computer-Assisted Materials Design and Process Simulation), -9-1993 to --, Tokyo, Japan pp. 135-140.. (Unpublished)

Feih, S and Shercliff, HR and McGrath, G Optimisation of peel joint geometries in CFRP laminates under static loading with regard to first and final failure. In: ECCM-9 (9th European Conference on Composite Materials), -4-2000 to --, Brighton, UK. (Unpublished)

Bratland, DH and Grong, O and Shercliff, HR and Tjotta, S and Myhr, OR Process model based optimisation of cooling schedules for AA6082 extrusions. In: ICAA4 (4th International Conference on Aluminium Alloys), -9-1994 to --, Atlanta, USA. (Unpublished)

Kaute, DAW and Ashby, MF and Shercliff, HR Toughening mechanisms in delamination of ceramic matrix composites. In: ECCM-6 (6th European Conference on Composite Materials), -9-1993 to --, Bordeaux, France pp. 483-490.. (Unpublished)

Ion, JC and Shercliff, HR and Ashby, MF A chart for laser processing of metallic alloys. In: Mat Tech 90, -6-1990 to --, Helsinki, Finland. (Unpublished)

Sun, X and Trusty, PA and Yeomans, JA and Shercliff, HR The fabrication and properties of alumina-ductile metal particle composites. In: ICCM7 (7th International Conference on Composite Materials), -7-1991 to --, Hawaii, USA. (Unpublished)

Wegst, UGK and Shercliff, HR and Ashby, MF The mechanical efficiency of bamboo and palm. In: Interdisciplinary Colloquium on Plant Biomechanics, -9-1994 to --, Montpellier, France. (Unpublished)

Wegst, UGK and Shercliff, HR and Ashby, MF The structure and properties of bamboo as an engineering material. In: 3rd. Int. Symp.of the Sondersforschungsbereich 230 ("Evolution of Natural Structures"), -10-1994 to --, Stuttgart, Germany pp. 209-213.. (Unpublished)

Monograph

Crotaz, CR and Shercliff, HR (2003) Advanced statistical methods applied to modelling of aluminium processing. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kennish, YC and Shercliff, HR and Liddell, I (2001) Tensile strength and tear resistance of woven polyethylene fabric. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kennish, YC and Shercliff, HR and Liddell, I (2001) Tensile strength and tear resistance of woven polyethylene fabric. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Feih, S and Shercliff, HR and McGrath, G (2000) Design of composite adhesive joints. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Johnson, KL and Shercliff, HR and Ashby, MF (1999) Design and selection tools for sports equipment. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Johnson, KW and Shercliff, HR and Ashby, MF (1999) Design and selection tools for sports equipment. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Miyamoto, R and Shercliff, HR (1999) Selection of joining processes for aluminium alloys. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Sauvage, C and Lovatt, AM and Shercliff, HR (1998) Development of selection methods for steels and their heat treatments. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Shercliff, HR and Jayaram, S (1998) Effects of arc welding on aluminium alloy 7108. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Yao, CH and Shercliff, HR (1998) Modelling of welding of aluminium alloy 7475. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Russell, MJ and Shercliff, HR and Threadgill, P (1997) Development and modelling of friction stir welding. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR (1997) Modelling of materials and processes: a review of activity and needs in the UK in response to the Technology Foresight exercise. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Amariglio, L and Reynolds, AD (1997) Toughness testing of aluminium alloys AA6082 and friction stir welded AA7108. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kerherve, Y and Shercliff, HR (1997) The effect of prior heat treatment on the recrystallisation of hot-worked aluminium alloy AA3104. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Lovatt, A and Shercliff, HR (1996) Process selection in engineering design: a task level approach. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Myhr, OR and Shercliff, HR and Furu, T (1996) The effect of hot deformation on the ageing response and notched strength of aluminium alloy AA6082. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Poole, WJ and Shercliff, HR and Boyd, MTB (1995) The effect of cold deformation after quenching on the ageing of 7475 aluminium alloy. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kaute, DAW and Ashby, MF and Shercliff, HR (1994) Delamination, fibre bridging and toughness of ceramic matrix composites, version 2. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Wegst, UGK and Shercliff, HR and Ashby, MF (1994) Mechanical performance of bamboo. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Newell, JM and Shercliff, HR and Ashby, MF (1994) Metal matrix composites: development of a database and case studies in design. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kaute, DAW and Ashby, MF and Shercliff, HR (1994) Mode I delamination in ceramic matrix composites with 2-dimensional reinforcement. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kaute, DAW and Ashby, MF and Shercliff, HR (1994) Mode II delamination in ceramic matrix composites with unidirectional reinforcement. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Vekinis, G and Sofianopoulos, M and Munday, M and Fernandes, J (1994) Novel processing of Ni-toughened alumina and characterisation of fracture behaviour. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kaute, DAW and Ashby, MF and Shercliff, HR (1993) Delamination, fibre bridging, and toughness of ceramic matrix composites: version 1. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Sargent, PM and Shercliff, HR and Wood, RL (1993) Modelling materials processing. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Lim, CY and Shercliff, HR (1993) Quench sensitivity of aluminium alloy 6082. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Vekinis, G and Ashby, MF and Beaumont, PWR (1992) Direct observation of CAS-glass/SiC composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR (1991) Fatigue crack closure in silicon carbide-reinforced aluminium alloys. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Ashby, MF (1989) Modelling of the response of heat-treatable aluminium alloys to thermal processing. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Johnson, KL and Shercliff, HR and Kopalinsky, E (1989) Shakedown of two-dimensional asperities in sliding contact. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Fleck, NA (1989) The effect of geometry on fatigue crack growth in plane strain. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Ashby, MF (1989) The prediction of case depth in laser transformation hardening. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR (1988) Strength loss in the heat affected zones of welds in non-heat-treatable aluminium alloys. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Ashby, MF (1986) Master plots for predicting the case-depth in laser surface treatments. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Thesis

Shercliff, HR (1987) Modelling of thermal processes in metallic alloys. PhD thesis, UNSPECIFIED.