Article

Castrejón-Pita, JR and Castrejón-Pita, AA and Hinch, EJ and Lister, JR and Hutchings, IM (2012) Self-similar breakup of near-inviscid liquids. Phys Rev E Stat Nonlin Soft Matter Phys, 86. 015301-.

Castrejon-Pita, AA and Castrejon-Pita, JR and Hutchings, IM (2012) Breakup of Liquid Filaments. PHYS REV LETT, 108. -. ISSN 0031-9007

Castrejón-Pita, AA and Castrejón-Pita, JR and Hutchings, IM (2012) Experimental observation of von Kármán vortices during drop impact. Phys Rev E Stat Nonlin Soft Matter Phys, 86. 045301-.

Castrejón-Pita, AA and Castrejón-Pita, JR and Hutchings, IM (2012) Experimental observation of von Kármán vortices during drop impact. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 86. ISSN 1539-3755

Hoath, SD and Jung, S and Hsiao, W-K and Hutchings, IM (2012) How PEDOT:PSS solutions produce satellite-free inkjets. Organic Electronics: physics, materials, applications, 13. pp. 3259-3262. ISSN 1566-1199

Hoath, SD and HARLEN, OG and HUTCHINGS, IM (2012) Jetting behaviour of polymer solutions in drop-on-demand inkjet printing. Journal of Rheology, 56. pp. 1109-1127.

Hutchings, IM (2012) Patterning of carbon nanotube structures by inkjet printing of catalyst. Journal of Materials Science, 47. pp. 5760-5765. ISSN 0022-2461

Gardiner, DJ and Hsiao, W-K and Morris, SM and Hands, PJW and Wilkinson, TD and Hutchings, IM and Coles, HJ (2012) Printed photonic arrays from self-organized chiral nematic liquid crystals. SOFT MATTER, 8. pp. 9977-9980. ISSN 1744-683X

Castrejón-Pita, JR and Castrejón-Pita, AA and Hinch, EJ and Lister, JR and Hutchings, IM (2012) Self-similar breakup of near-inviscid liquids. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 86. ISSN 1539-3755

Castrejón-Pita, JR and Hoath, SD and Hutchings, IM (2012) Velocity profiles in a cylindrical liquid jet by reconstructed velocimetry. Journal of Fluids Engineering, Transactions of the ASME, 134. ISSN 0098-2202

Jung, S and Hutchings, IM (2012) The impact and spreading of a small liquid drop on a non-porous substrate over an extended time scale. SOFT MATTER, 8. pp. 2686-2696. ISSN 1744-683X

Jung, S and Hoath, SD and Hutchings, IM (2012) The role of viscoelasticity in drop impact and spreading for inkjet printing of polymer solution on a wettable surface. Microfluidics and Nanofluidics. pp. 1-7. ISSN 1613-4982

Betton, ES and Hsiao, WK and Martin, GD and Hutchings, IM (2011) Behavior of Ink Jet Printed Drops on a Corona-Treated Polymeric Film Substrate. J IMAGING SCI TECHN, 55. -. ISSN 1062-3701

Hutchings, IM (2011) Impresión por chorro de tinta para la decoración de baldosas: tecnología y oportunidades (I). Tecnica Ceramica, 392. pp. 354-359. ISSN 0211-7290

Castrejon-Pita, JR and Martin, GD and Hutchings, IM (2011) Experimental Study of the Influence of Nozzle Defects on Drop-on-Demand Ink Jets. J IMAGING SCI TECHN, 55. -. ISSN 1062-3701

Castrejon-Garcia, R and Castrejon-Pita, JR and Martin, GD and Hutchings, IM (2011) The shadowgraph imaging technique and its modern application to fluid jets and drops. REV MEX FIS, 57. pp. 266-275. ISSN 0035-001X

Jung, S-J and Hoath, SD and Martin, GD and Hutchings, IM (2011) Experimental study of atomization patterns produced by the oblique collision of two viscoelastic liquid jets. Journal of Non-Newtonian Fluid Mechanics, 166. pp. 297-306.

Castrejon-Pita, JR and Betton, ES and Kubiak, KJ and Wilson, MCT and Hutchings, IM (2011) The dynamics of the impact and coalescence of droplets on a solid surface. BIOMICROFLUIDICS, 5. -. ISSN 1932-1058

Hutchings, IM (2011) Impresión por chorro de tinta para la decoración de baldosas: tecnología y oportunidades (II). Tecnica Ceramica, 395. pp. 558-561. ISSN 0211-7290

Betton, ES and Hsiao, W-K and Martin, GD and Hutchings, IM (2011) Behavior of ink-jet printed drops on a corona-treated polymeric film substrate. J. Imaging Sci. Technol, 55. 050606-. ISSN 1062-3701

Castrejón-Pita, JR and Morrison, NF and Harlen, OG and Martin, GD and Hutchings, IM (2011) Experiments and Lagrangian simulations on the formation of droplets in continuous mode. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 83. ISSN 1539-3755

Castrejón-Pita, JR and Morrison, NF and Harlen, OG and Martin, GD and Hutchings, IM (2011) Experiments and Lagrangian simulations on the formation of droplets in drop-on-demand mode. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 83. ISSN 1539-3755

Hsiao, W-K and Hoath, SD and Martin, GD and Hutchings, IM and Chilton, NB and Jones, S (2011) Imbibition dynamics of nano-particulate ink-jet drops on micro-porous media. Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2011, 2. pp. 566-569.

Morton, CE and Baker, RC and Hutchings, IM (2011) Measurement of liquid film thickness by optical fluorescence and its application to an oscillating piston positive displacement flowmeter. Measurement Science and Technology, 22. ISSN 0957-0233

Morton, CE and Baker, RC and Hutchings, IM (2011) Measurement of liquid film thickness by optical fluorescence and its application to an oscillating-piston positive-displacement flowmeter. Measurement Science and Technology, 22. 125403-. ISSN 0957-0233

Jung, S-J and Hoath, SD and Martin, GD and Hutchings, IM (2010) A new method to assess the jetting behaviour of drop-on-demand inkjet fluids. Journal of Imaging Science and Technology, 55. 010501-. ISSN 1062-3701

Sato, J and Hutchings, IM (2010) Non-destructive testing of laminated paper products by active infra-red thermography. APPITA J, 63. pp. 399-406. ISSN 1038-6807

Costa, HL and Parreira, J and Gonçalves Jr, JL and Hutchings, IM (2010) Alternative methods for surface texturing. Proceedings - International Brazilian Conference on Tribology. pp. 221-233.

Jung, S and Hoath, SD and Martin, GD and Hutchings, IM (2010) Atomization patterns produced by the oblique collision of two Newtonian liquid jets. Physics of Fluids, 22. 042101-. ISSN 1070-6631

Sabatini, G and Ceschini, L and Martini, C and Williams, JA and Hutchings, IM (2010) Improving sliding and abrasive wear behaviour of cast A356 and wrought AA7075 aluminium alloys by plasma electrolytic oxidation. Materials and Design, 31. pp. 816-828. ISSN 0261-3069

Castrejón-Pita, JR and Martin, GD and Hutchings, IM (2010) Influence of nozzle defects on drop-on-demand ink-jets. International Conference on Digital Printing Technologies. pp. 14-17.

Sato, J and Hutchings, IM (2010) Non-destructive testing of laminated paper products by active infra-red thermography. Appita Journal. ISSN 1038-6807

Betton, ES and Martin, GD and Hutchings, IM (2010) The effects of corona treatment on impact and spreading of ink-jet drops on a polymeric film substrate. International Conference on Digital Printing Technologies. pp. 301-304.

Yokoi, K and Vadillo, D and Hinch, J and Hutchings, I (2009) Numerical studies of the influence of the dynamic contact angle on a droplet impacting on a dry surface. PHYS FLUIDS, 21. -. ISSN 1070-6631

Pharr, GM and Cheng, YT and Hutchings, IM and Sakai, M and Moody, NR and Sundararajan, G and Swain, MV (2009) INDENTATION METHODS IN ADVANCED MATERIALS RESEARCH Introduction. J MATER RES, 24. pp. 579-580. ISSN 0884-2914

Costa, HL and Hutchings, IM (2009) Development of a maskless electrochemical texturing method. Journal of Materials Processing Technology, 209. pp. 3869-3878. ISSN 0924-0136

Costa, HL and Hutchings, IM (2009) Effects of die surface patterning on lubrication in strip drawing. Journal of Materials Processing Technology, 209. pp. 1175-1180. ISSN 0924-0136

Hsiao, WK and Hoath, SD and Martin, GD and Hutchings, IM (2009) Ink jet printing for direct mask deposition in printed circuit board fabrication. The Journal of Imaging Science and Technology, 53. 050304-(8). ISSN 1062-3701

Pharr, GM and Cheng, Y-T and Hutchings, IM and Sakai, M and Moody, NR and Sundararajan, G and Swain, MV (2009) Introduction. Journal of Materials Research, 24. pp. 579-580. ISSN 0884-2914

Hoath, SD and Hutchings, IM and Martin, GD and Tuladhar, MR and Mackley, M and Vadillo, D (2009) Links between ink rheology, drop-on-demand jet formation, and printability. The Journal of Imaging Science and Technology, 53. 041208-(8). ISSN 1062-3701

Yokoi, K and Vadillo, D and Hinch, J and Hutchings, IM (2009) Numerical studies of the influence of the dynamic contact angle on a droplet impacting on a dry surface. Physics of Fluids, 21. 072102-. ISSN 1070-6631

Hutchings, IM (2009) The contributions of David Tabor to the science of indentation hardness. Journal of Materials Research, 24. pp. 581-589. ISSN 0884-2914

Sato, J and Hutchings, IM and Woodhouse, J (2008) Determination of the dynamic elastic properties of paper and paperboard from the low-frequency vibration modes of rectangular plates. APPITA J, 61. pp. 291-296. ISSN 1038-6807

Hon, KKB and Li, L and Hutchings, IM (2008) Direct writing technology—advances and developments. CIRP Annals - Manufacturing Technology, 57. pp. 601-620. ISSN 0007-8506

Costa, HL and Hutchings, IM (2008) Ink-jet printing for patterning engineering surfaces. International Conference on Digital Printing Technologies. pp. 256-259.

Martin, GD and Hoath, SD and Hutchings, IM (2008) Inkjet printing - the physics of manipulating liquid jets and drops. Journal of Physics: Conference Series, 105. 012001-012015. ISSN 1742-6596

Castrejon Pita, JR and Martin, GD and Hoath, SD and Hutchings, IM (2008) A simple large-scale droplet generator for studies of inkjet printing. Review of Scientific Instruments, 79. 075108-. ISSN 0034-6748

Sato, J and Hutchings, IM and Woodhouse, J (2007) Determination of the dynamic elastic properties of paper and paperboard from the low-frequency vibration modes of rectangular plates. Proceedings of the International Paper Physics Conference, 2. pp. 15-22. ISSN 0022-815X

Hutchings, IM and Martin, GD and Hoath, SD (2007) High speed imaging and analysis of jet and drop formation. Journal of Imaging Science and Technology, 51. pp. 438-444. ISSN 1062-3701

Hutchings, IM and Martin, GD and Hoath, SD (2007) High speed imaging and analysis of jet and drop formation. Journal of Imaging Science and Technology, 51. ISSN 1062-3701

Costa, HL and Hutchings, IM (2007) Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions. Tribology International, 40. pp. 1227-1238. ISSN 0301-679X

Martin, GD and Hoath, SD and Hutchings, IM (2007) Inkjet printing - the physics of manipulating liquid jets and drops. Journal of Physics Conference Series. ISSN 1742-6588

Sato, J and Hutchings, IM and Woodhouse, J (2007) Measurement of the elastic modulus of paperboard from the low-frequency vibration modes of rectangular plates. Japan TAPPI Journal, 61. pp. 71-85. ISSN 0022-815X

Hoath, S and Martin, G and Castrejón-Pita, R and Hutchings, I (2007) Satellite formation in drop-on-demand printing of polymer solutions. International Conference on Digital Printing Technologies. pp. 331-335.

Xu, Y and Hutchings, IM (2006) Cold spray deposition of thermoplastic powder. Surface and Coatings Technology, 201. pp. 3044-3050. ISSN 0257-8972

Hutchings, IM and Briscoe, BJ (2006) Obituary – David Tabor 1913-2005. Wear, 260. pp. 1151-1152. ISSN 0043-1648

Sanchez, E and Ibanez, MJ and Garcia Ten, J and Quereda, MF and Hutchings, IM and Xu, YM (2006) Porcelain tile microstructure: Implications for polished tile properties. Journal of the European Ceramic Society, 26. pp. 2533-2540. ISSN 0955-2219

Hutchings, IM and Xu, Y and Sanchez, E and Ibanez, MJ and Quereda, MF (2006) Porcelain tile microstructure: implications for polishability. Journal of the European Ceramic Society, 26. pp. 1035-1042. ISSN 0955-2219

Wang, P and Hutchings, IM and Duncan, SJ and Jenkins, L and Woo, E (2006) Strain whitening of a thermoplastic olefin material. Journal of Materials Science, 41. pp. 4847-4859. ISSN 0022-2461

Hutchings, IM and Adachi, K and Xu, Y and Sanchez, E and Ibanez, MJ and Quereda, MF (2005) Analysis and laboratory simulation of an industrial polishing process for porcelain ceramic tiles. Journal of the European Ceramic Society, 25. pp. 3151-3156. ISSN 0955-2219

Deng, T and Li, J and Chaudhry, AR and Patel, M and Hutchings, I and Bradley, MSA (2005) Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials. Wear, 258. pp. 402-411. ISSN 0043-1648

Deng, T and Li, J and Chaudhry, AR and Patel, M and Hutchings, I and Bradley, MSA (2005) Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials. Wear, 258. pp. 402-411. ISSN 0043-1648

Hutchings, IM and Xu, Y and Sanchez, E and Ibanez, MJ and Quereda, MF (2005) Development of surface finish during the polishing of porcelain ceramic tiles. Journal of Materials Science, 40. pp. 37-42. ISSN 0022-2461

Deng, T and Patel, M and Hutchings, I and Bradley, MSA (2005) Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors. Wear, 258. pp. 426-433. ISSN 0043-1648

Deng, T and Patel, M and Hutchings, I and Bradley, MSA (2005) Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors. Wear, 258. pp. 426-433. ISSN 0043-1648

Deng, T and Chaudhry, AR and Patel, M and Hutchings, I and Bradley, MSA (2005) Effect of particle concentration on erosion rate of mild steel bends in a pneumatic conveyor. Wear, 258. pp. 480-487. ISSN 0043-1648

Deng, T and Chaudhry, AR and Patel, M and Hutchings, I and Bradley, MSA (2005) Effect of particle concentration on erosion rate of mild steel bends in a pneumatic conveyor. Wear, 258. pp. 480-487. ISSN 0043-1648

Costa, HL and Hutchings, IM (2005) Lubricated sliding wear of textured surfaces. Proceedings of the World Tribology Congress III - 2005. pp. 431-432.

Chen, H and Xu, C and Zhou, Q and Hutchings, IM and Shipway, PH and Liu, J (2005) Micro-scale abrasive wear behaviour of HVOF sprayed and laser-remelted conventional and nanostructured WC-Co coatings. Wear, 258. pp. 333-338. ISSN 0043-1648

Gee, MG and Gant, AJ and Hutchings, IM and Kusano, Y and Schiffman, K and Van Acker, K and Poulat, S and Gachon, Y and von Stebut, J and Hatto, P and Plint, G (2005) Results from an interlaboratory exercise to validate the micro-scale abrasion test. Wear, 259. pp. 27-35. ISSN 0043-1648

Adachi, K and Hutchings, IM (2005) Sensitivity of wear rates in the micro-scale abrasion test to test conditions and material hardness. Wear, 258. pp. 318-321. ISSN 0043-1648

Chen, H and Xu, C and Qu, J and Hutchings, IM and Shipway, PH and Liu, J (2005) Sliding wear behaviour of laser clad coatings based upon a nickel-based self-fluxing alloy co-deposited with conventional and nanostructured tungsten carbide-cobalt hardmetals. Wear, 259. pp. 801-806. ISSN 0043-1648

Kusano, Y and Hutchings, IM (2005) Sources of variability in the free-ball micro-scale abrasion test. Wear, 258. pp. 313-317. ISSN 0043-1648

Kusano, Y and Van Acker, K and Hutchings, IM (2004) Methods of data analysis for the micro-scale abrasion test on coated substrates. Surface and Coatings Technology, 183. pp. 312-327. ISSN 0257-8972

Kumar, VC and Hutchings, IM (2004) Reduction of the sliding friction of metals by the application of longitudinal or transverse ultrasonic vibration. Tribology International, 37. pp. 833-840. ISSN 0301-679X

Burstein, GT and Sasaki, K and Mcaleese, C and Hutchings, IM (2004) Some observations describing the electrochemical surface annealing of austenitic stainless steel. Proceedings - Electrochemical Society, PV 200. pp. 255-263.

Kusano, Y and Hutchings, IM (2003) Analysis of nano-indentation measurements on carbon nitride films. Surface & Coatings Technology, 169. pp. 739-742. ISSN 0257-8972

Burstein, GT and Sasaki, K and Hutchings, IM (2003) Lattice changes generated by electrochemically induced surface annealing of austenitic stainless steel. ELECTROCHEM SOLID ST, 6. D13-D15. ISSN 1099-0062

Kusano, Y and Barber, ZH and Evetts, JE and Hutchings, IM (2003) Influence of inert gases on ionized magnetron plasma deposition of carbon nitride thin films. Surface & Coatings Technology, 174-17. pp. 601-605. ISSN 0257-8972

Burstein, GT and Sasaki, K and Hutchings, IM (2003) Lattice changes generated by electrochemically induced surface annealing of austenitic stainless steel. Electrochemical and Solid State Letters, 6. D13-D15. ISSN 1099-0062

Kusano, Y and Hutchings, IM (2003) Modelling the entrainment and motion of particles in a gap: Application to abrasive wear. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 217. pp. 427-434. ISSN 1350-6501

Gee, MG and Gant, A and Hutchings, I and Bethke, R and Schiffman, K and Van Acker, K and Poulat, S and Gachon, Y and von Stebut, J (2003) Progress towards standardisation of ball cratering. Wear, 255. pp. 1-13. ISSN 0043-1648

Adachi, K and Hutchings, IM (2003) Wear-mode mapping for the micro-scale abrasion test. Wear, 255. pp. 23-29. ISSN 0043-1648

Crossley, A and Johnston, C and Hutchings, IM and Myhra, S and Temple, JAG and Wiklund, U (2002) Surface treatment for 'galling' protection of titanium alloys - characterization by surface-specific electron and Raman spectroscopies. Thin Solid Films, 414. pp. 224-230. ISSN 0040-6090

Greer, AL and Rutherford, KL and Hutchings, M (2002) Wear resistance of amorphous alloys and related materials. INT MATER REV, 47. pp. 87-112. ISSN 0950-6608

Hutchings, IM and Wang, PZ and Parry, GC (2002) An optical method for assessing scratch damage in bulk materials and coatings. Surface and Coatings Technology, 165. pp. 186-193. ISSN 0257-8972

Hutchings, IM (2002) Abrasion in wear and manufacturing processes. Metallurgia Italiana, 94. pp. 17-22. ISSN 0026-0843

Hutchings, IM (2002) Abrasion processes in wear and manufacturing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 216. pp. 55-62. ISSN 1350-6501

Hanson, R and Allsopp, D and Deng, T and Smith, D and Bradley, MSA and Hutchings, IM and Patel, MK (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers Journal of Process Mechanical Engineering, 216. pp. 143-149. ISSN 0954-4089

Hanson, R and Allsopp, D and Deng, T and Smith, D and Bradley, MSA and Hutchings, IM and Patel, MK (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers Journal of Process Mechanical Engineering, 216. pp. 143-149. ISSN 0954-4089

Racine, B and Ferrari, AC and Morrison, NA and Hutchings, I and Milne, WI and Robertson, J (2001) Properties of amorphous carbon-silicon alloys deposited by a high plasma density source. Journal of Applied Physics, 90. pp. 5002-5012. ISSN 0021-8979

De Mello, JDB and Binder, R and Klein, AN and Hutchings, IM (2001) Effect of compaction pressure and powder grade on microstructure and hardness of steam oxidised sintered iron. Powder Metallurgy, 44. pp. 53-61. ISSN 0032-5899

De Mello, JDB and Hutchings, IM (2001) Effect of processing parameters on the surface durability of steam-oxidized sintered iron. Wear, 250. pp. 435-448. ISSN 0043-1648

Sasaki, K and Burstein, GT and Hutchings, IM (2001) Improving the tribological properties of stainless steel surfaces by novel electrochemical processing. Proceedings of JAST Tribology Conference, 2. pp. 967-972. ISSN 0919-6005

Wiklund, U and Hutchings, IM (2001) Investigation of surface treatments for galling protection of titanium alloys. Wear, 251. pp. 1034-1041. ISSN 0043-1648

Allsopp, DN and Hutchings, IM (2001) Micro-scale abrasion and scratch response of PVD coatings at elevated temperatures. Wear, 250. pp. 1308-1314. ISSN 0043-1648

Racine, B and Ferrari, AC and Morrison, NA and Hutchings, I and Milne, WI and Robertson, J (2001) Properties of amorphous carbon-silicon alloys deposited by a high plasma density source. Journal of Applied Physics, 90. pp. 5002-5012. ISSN 0021-8979

Trezona, RI and Hutchings, IM (2001) Resistance of paint coatings to multiple solid particle impact: effect of coating thickness and substrate material. Progress in Organic Coatings, 41. pp. 85-92. ISSN 0300-9440

Imbeni, V and Martini, C and Lanzoni, E and Poli, G and Hutchings, IM (2001) Tribological behaviour of multi-layered PVD nitride coatings. Wear, 250. pp. 997-1002. ISSN 0043-1648

Hutchings, IM (2001) Tribology in the U. K.: past, present and future. Journal of Japanese Society of Tribologists (Toraiborojisuto), 46. pp. 17-23. ISSN 0915-1168

Kelly, DA and Hutchings, IM (2001) A new method for measurement of particle abrasivity. Wear, 250. pp. 76-80. ISSN 0043-1648

Kusano, Y and Barber, ZH and Evetts, JE and Hutchings, IM (2000) Tribological and mechanical properties of carbon nitride films deposited by ionised magnetron sputtering. Surface & Coatings Technology, 124. pp. 104-109. ISSN 0257-8972

Hutchings, I (2000) Oxbridge and materials education. MATER WORLD, 8. p. 2. ISSN 0967-8638

Ferrari, AC and Racine, B and Morrison, NA and Hutchings, I and Milne, WI and Robertson, J (2000) Amorphous carbon-silicon alloys prepared by a high plasma density source. Materials Research Society Symposium - Proceedings, 593. pp. 523-528. ISSN 0272-9172

Trezona, RI and Hutchings, IM and Weakley, AP (2000) Effect of weathering on the mechanical properties of automotive clearcoats. Surface Coatings International, 83. pp. 580-587. ISSN 1356-0751

Trezona, RI and Hutchings, IM and Weakley, AP (2000) Effect of weathering on the mechanical properties of automotive clearcoats. JOCCA - Surface Coatings International, 83. pp. 580-587. ISSN 1356-0751

Burstein, GT and Hutchings, IM and Sasaki, K (2000) Electrochemically induced annealing of stainless-steel surfaces. Nature, 407. pp. 885-887. ISSN 0028-0836

Walter, G and Heuer, V and Hutchings, IM (2000) Method for determining erosion resistance of fibre-insulating materials | Untersuchungsmethode zur Bestimmung der Erosionsbestaendigkeit von Faserdaemmstoffen. Keramische Zeitschrift, 52. pp. 668-670. ISSN 0023-0561

Richter, J and Hutchings, IM and Clyne, TW and Allsopp, DN and Peng, X (2000) Tribological characterization of diamond-like carbon films on nonledeburitic high-speed steels. Materials Characterization, 45. pp. 233-239. ISSN 1044-5803

Walter, G and Heuer, V and Hutchings, IM (2000) Untersuchungsmethode zur Bestimmung der Erosionsbestandigkeit von Faserdammstoffen. Keramische Zeitschrift, 52. pp. 668-670. ISSN 0023-0561

Trezona, RI and Pickles, MJ and Hutchings, IM (2000) A full factorial investigation of the erosion durability of automotive clearcoats. Tribology International, 33. pp. 559-571. ISSN 0301-679X

Wang, PZ and Hutchings, IM and Duncan, SJ and Jenkins, L and Woo, E (2000) A new technique for assessment of scratches on automotive interior systems. Proceedings of the SPE Automotive TPO Global Conference 2000, 1895. pp. 107-122.

Joiner, A and Linden, JA and Hutchings, IM (2000) The scratch hardness of in vitro formed pellicle. Journal of Dental Research, 79. p.1202-. ISSN 0022-0345

Kusano, Y and Christou, C and Barber, ZH and Evetts, JE and Hutchings, IM (1999) Deposition of carbon nitride films by ionised magnetron sputtering. THIN SOLID FILMS, 356. pp. 117-121. ISSN 0040-6090

Allsopp, DN and Hutchings, IM and Trezona, RI (1999) Comments on "micro-scale abrasive wear testing of PVD coatings on curved substrates". Tribology Letters, 7. pp. 229-231. ISSN 1023-8883

Kusano, Y and Evetts, JE and Hutchings, IM (1999) Deposition of boron carbon nitride films by dual cathode magnetron sputtering. Thin Solid Films, 343-34. pp. 250-253. ISSN 0040-6090

Kusano, Y and Christou, C and Barber, ZH and Evetts, JE and Hutchings, IM (1999) Deposition of carbon nitride films by ionised magnetron sputtering. Thin Solid Films, 355-35. pp. 117-121. ISSN 0040-6090

Kahlman, L and Hutchings, IM (1999) Effect of particulate contamination in grease-lubricated hybrid rolling bearings. Tribology Transactions, 42. pp. 842-850. ISSN 0569-8197

Heuer, V and Walter, G and Hutchings, IM (1999) High temperature erosion of fibrous ceramic components by solid particle impact. Wear, 235. pp. 257-262. ISSN 0043-1648

Wang, PZ and Hutchings, IM and Duncan, SJ and Jenkins, L (1999) Quantitative characterization of scratch damage in polypropylene (TPO) for automotive interior applications. SAE Transactions: Journal of Materials and Manufacturing, 108. pp. 134-150. ISSN 0096-736X

Barradas, NP and Jeynes, C and Kusano, Y and Evetts, JE and Hutchings, IM (1999) RBS/simulated annealing and FTIR characterisation of BCN films deposited by dual cathode magnetron sputtering. AIP Conference Proceedings, 475. pp. 504-507. ISSN 0094-243X

Trezona, RI and Hutchings, IM (1999) Three-body abrasive wear testing of soft materials. Wear, 235. pp. 209-221. ISSN 0043-1648

Trezona, RI and Allsopp, DN and Hutchings, IM (1999) Transitions between two-body and three-body abrasive wear: influence of test conditions in the microscale abrasive wear test. Wear, 229. pp. 205-214. ISSN 0043-1648

Liew, WYH and Hutchings, IM and Williams, JA (1999) The interaction between tool material, environment, and process conditions in the machining of aluminium alloys. Machining Science and Technology, 3. pp. 273-286. ISSN 1091-0344

Liew, WY and Hutchings, IM and Williams, JA (1999) The interaction between tool material, environment, and process conditions in the machining of aluminum alloys. Machining Science and Technology, 3. pp. 273-286. ISSN 1091-0344

Heuer, V and Walter, G and Hutchings, IM (1999) A study of the erosive wear of fibrous ceramic components by solid particle impact. Wear, 229. pp. 493-501. ISSN 0043-1648

Chen, H and Hutchings, IM (1998) Abrasive wear resistance of plasma-sprayed tungsten carbide-cobalt coatings. Surface & Coatings Technology, 107. pp. 106-114. ISSN 0257-8972

Hutchings, I (1998) Untitled. WEAR, 219. p. 2. ISSN 0043-1648

Kusano, Y and Evetts, JE and Somekh, RE and Hutchings, IM (1998) Properties of carbon nitride films deposited by magnetron sputtering. Thin Solid Films, 332. pp. 56-61. ISSN 0040-6090

Hutchings, IM (1998) Abrasive and erosive wear tests for thin coatings: a unified approach. Tribology International, 31. pp. 5-16. ISSN 0301-679X

Liew, WYH and Hutchings, IM and Williams, JA (1998) Friction and lubrication effects in the machining of aluminium alloys. Tribology Letters, 5. pp. 117-122. ISSN 1023-8883

Liew, WYH and Hutchings, IM and Williams, JA (1998) Friction and lubrication effects in the machining of aluminium alloys. Tribology Letters, 5. pp. 117-122. ISSN 1023-8883

Pickles, MJ and Trezona, RI and Hutchings, IM and Ramamurthy, AC and Freese, JW (1998) Novel methods for characterizing the mechanical durability of automobile paint systems. SAE Transactions, 107. pp. 821-828. ISSN 0096-736X

Allsopp, DN and Trezona, RI and Hutchings, IM (1998) The effects of ball surface condition in the micro-scale abrasive wear test. Tribology Letters, 5. pp. 259-264. ISSN 1023-8883

Rogers, PM and Hutchings, IM and Little, JA and Kara, F (1997) Microstructural characterization of surface layers formed on a low alloy steel during erosion - oxidation in a fluidized bed. J MATER SCI, 32. pp. 4575-4583. ISSN 0022-2461

Hutchings, I (1997) Part special issue on scratch testing. TRIBOL INT, 30. R3-R3. ISSN 0301-679X

Andersen, P and Bottiger, J and Dyrbye, K and Hutchings, IM and Rutherford, KL and Wroblewski, A (1997) Mechanical properties of amorphous Ta100-xCrx thin films. Materials Science and Engineering A - Structural Materials, 226/22. pp. 871-873. ISSN 0921-5093

Hutchings, I (1997) Skiing on film. PHYS WORLD, 10. p. 22. ISSN 0953-8585

Lou, HQ and Axen, N and Somekh, RE and Hutchings, IM (1997) Effect of deposition conditions on the characteristics of reactively sputtered titanium nitride films. Surface & Coatings Technology, 90. pp. 123-127. ISSN 0257-8972

Axen, N and Kahlman, L and Hutchings, IM (1997) Correlations between tangential force and damage mechanisms in the scratch testing of ceramics. Tribology International, 30. pp. 467-474. ISSN 0301-679X

Morrison, NA and Muhl, S and Rodil, SE and Milne, WI and Robertson, J and Weiler, M and Wang, PZ and Hutchings, I and Stolojan, V and Brown, LM (1997) High rate deposition of Ta-C:H using an electron cyclotron wave resonance plasma source. Materials Research Society Symposium - Proceedings, 498. pp. 147-152. ISSN 0272-9172

Sato, J and de Silveira, G and Hutchings, IM (1997) Measurement of the friction of paper by the strip-on-drum method. Tribology International, 30. pp. 633-640. ISSN 0301-679X

Rogers, PM and Hutchings, IM and Little, JA and Kara, F (1997) Microstructural characterization of surface layers formed on a low alloy steel during erosion oxidation in a fluidized bed. Journal of Materials Science, 32. pp. 4575-4583. ISSN 0022-2461

Hutchings, IM (1997) New directions in tribology. Tribology Letters, 3. ISSN 0301-679X

Zhang, XS and Clyne, TW and Hutchings, IM (1997) Relationship between microstructure and erosive wear resistance of plasma sprayed alumina coatings. Surface Engineering, 13. pp. 393-401. ISSN 0267-0844

Hutchings, IM (1997) Special issue on scratch testing. Tribology International, 30. pp. 467-516. ISSN 0301-679X

Rutherford, KL and Hutchings, IM (1997) Theory and application of a micro-scale abrasive wear test. Journal of Testing and Evaluation, 25. pp. 250-260. ISSN 0090-3973

Rutherford, KL and Trezona, RI and Ramamurthy, AC and Hutchings, IM (1997) The abrasive and erosive wear of polymeric paint films. Wear, 203. pp. 325-334. ISSN 0043-1648

Choudhury, M and Hutchings, IM (1997) The effects of irradiation and ageing on the abrasive wear resistance of ultra high molecular weight polyethylene. Wear, 203. pp. 335-340. ISSN 0043-1648

Chandra, L and Allen, M and Butter, R and Rushton, N and Hutchings, IM and Clyne, TW (1996) The effect of biological fluids on the response of DLC films to a novel erosion durability test. DIAMOND AND RELATED MATERIALS, 5. pp. 410-414. ISSN 0925-9635

Rutherford, KL and Hutchings, IM (1996) Micro-scale abrasive wear testing of PVD coatings on curved substrates. TRIBOL LETT, 2. pp. 1-11. ISSN 1023-8883

Rutherford, KL and Hatto, PW and Davies, C and Hutchings, IM (1996) Abrasive wear resistance of TiN/NbN multi-layers: Measurement and neural network modelling. Surface & Coatings Technology, 86-87. pp. 472-479. ISSN 0257-8972

Rutherford, KL and Hutchings, IM (1996) Development of the erosion durability technique for thin coatings. Surface & Coatings Technology, 86-87. pp. 542-548. ISSN 0257-8972

Axen, N and Hutchings, IM (1996) Analysis of abrasive wear and friction behaviour of composites. Materials Science and Technology, 12. pp. 757-765. ISSN 0267-0836

Stevenson, ANJ and Hutchings, IM (1996) Development of the dry sand rubber wheel abrasion test. Wear, 195. pp. 232-240. ISSN 0043-1648

Axén, N and Botton, GA and Somekh, RE and Hutchings, IM (1996) Effect of deposition conditions on the chemical bonding in sputtered carbon nitride films. Diamond and Related Materials, 5. pp. 163-168. ISSN 0925-9635

Axen, N and Botton, GA and Lou, HQ and Somekh, RE and Hutchings, IM (1996) Incorporation of nitrogen in sputtered carbon films. Surface & Coatings Technology, 81. pp. 262-268. ISSN 0257-8972

Stevenson, ANJ and Hutchings, IM (1996) Indentation fracture of small brittle particles. Journal of Materials Science Letters, 15. pp. 688-690. ISSN 0261-8028

Rutherford, KL and Bull, SJ and Doyle, ED and Hutchings, IM (1996) Laboratory characterisation of the wear behaviour of PVD-coated tool steels and correlation with cutting tool performance. Surface & Coatings Technology, 80. pp. 176-180. ISSN 0257-8972

Lou, HQ and Axen, N and Somekh, RE and Hutchings, IM (1996) Mechanical properties of amorphous carbon nitride films. Diamond and Related Materials, 5. pp. 1303-1307. ISSN 0925-9635

Rutherford, KL and Hutchings, IM (1996) Micro-scale abrasive wear resistance of PVD coatings on curved substrates. Tribology Letters, 2. pp. 1-11. ISSN 1023-8883

Chandra, L and Allen, M and Butter, R and Rushton, N and Hutchings, IM and Clyne, TW (1996) The effect of biological fluids on the response of DLC films to a novel erosion durability test. Diamond and Related Materials, 5. pp. 410-414. ISSN 0925-9635

Rutherford, KL and Hutchings, IM (1996) A micro-abrasive wear test, with particular application to coated systems. Surface & Coatings Technology, 79. pp. 231-239. ISSN 0257-8972

Axen, N and Hutchings, IM and Jacobson, S (1996) A model for the friction of multiphase materials in abrasion. Tribology International, 29. pp. 467-476. ISSN 0301-679X

Shipway, PH and Hutchings, IM (1996) The role of particle properties in the erosion of brittle materials. Wear, 193. pp. 105-113. ISSN 0043-1648

LI, Y and BURSTEIN, GT and HUTCHINGS, IM (1995) THE INFLUENCE OF CORROSION ON THE EROSION OF ALUMINUM BY AQUEOUS SILICA SLURRIES. WEAR, 186. pp. 515-522. ISSN 0043-1648

ROGERS, PM and HUTCHINGS, IM and LITTLE, JA (1995) COATINGS AND SURFACE TREATMENTS FOR PROTECTION AGAINST LOW-VELOCITY EROSION-CORROSION IN FLUIDIZED-BEDS. WEAR, 186. pp. 238-246. ISSN 0043-1648

HOWES, TE and ROGERS, PM and LITTLE, JA and HUTCHINGS, IM (1995) EROSION-CORROSION OF MILD-STEEL IN A TEMPERATURE-GRADIENT. WEAR, 186. pp. 316-324. ISSN 0043-1648

ROGERS, PM and HOWES, TE and HUTCHINGS, IM and LITTLE, JA (1995) WASTAGE OF LOW-ALLOY STEELS IN A FLUIDIZED-BED ENVIRONMENT. WEAR, 186. pp. 306-315. ISSN 0043-1648

Rogers, PM and Hutchings, IM and Little, JA (1995) Coatings and surface treatments for protection against low-velocity erosion-corrosion in fluidized beds. Wear, 186-18. pp. 238-246. ISSN 0043-1648

Howes, TE and Rogers, PM and Little, JA and Hutchings, IM (1995) Erosion-corrosion of mild steel in a temperature gradient. Wear, 186. pp. 316-324. ISSN 0043-1648

Li, Y and Burstein, GT and Hutchings, IM (1995) Influence of environmental composition and electrochemical potential on the slurry erosion-corrosion of aluminium. Wear, 181. pp. 70-79. ISSN 0043-1648

Shipway, PH and Hutchings, IM (1995) Measurement of coating durability by solid particle erosion. Surface & Coatings Technology, 71. pp. 1-8. ISSN 0257-8972

Stevenson, ANJ and Hutchings, IM (1995) Scaling laws for particle velocity in the gas-blast erosion test. Wear, 181. pp. 56-62. ISSN 0043-1648

Rogers, PM and Howes, TE and Hutchings, IM and Little, JA (1995) Wastage of low alloy steels in a fluidized bed environment. Wear, 186-18. pp. 306-315. ISSN 0043-1648

Stevenson, ANJ and Hutchings, IM (1995) Wear of hardfacing while cast irons by solid particle erosion. Wear, 186. pp. 150-158. ISSN 0043-1648

Stevenson, ANJ and Hutchings, IM (1995) Wear of hardfacing white cast irons by solid particle erosion. Wear, 186-18. pp. 150-158. ISSN 0043-1648

Li, Y and Burstein, GT and Hutchings, IM (1995) The influence of corrosion on the erosion of aluminium by aqueous silica slurries. Wear, 186-18. pp. 515-522. ISSN 0043-1648

Stevenson, ANJ and Hutchings, IM (1995) The influence of nozzle length on the divergence of the erodent particle stream in a gas-blast erosion rig. Wear, 189. pp. 66-69. ISSN 0043-1648

Wakabayashi, T and Williams, JA and Hutchings, IM (1995) The kinetics of gas-phase lubrication in the orthogonal machining of an aluminium alloy. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 209. 131-. ISSN 1350-6501

Wakabayashi, T and Williams, JA and Hutchings, IM (1995) The kinetics of gas-phase lubrication in the orthogonal machining of an aluminium alloy. Proceedings of the Institution of Mechanical Engineers, pt J: Journal of Engineering Tribology, 209. pp. 131-136. ISSN 1350-6501

Hutchings, IM (1994) Wear-resistant materials - into the next century. Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 184. pp. 185-195. ISSN 0921-5093

Hutchings, IM (1994) Tribological properties of metal-matrix composites. Materials Science and Technology, 10. pp. 513-517. ISSN 0267-0836

Shipway, PH and Hutchings, IM (1994) A method for optimizing the particle-flux in erosion testing with a gas-blast apparatus. Wear, 174. pp. 169-175. ISSN 0043-1648

Sparks, AJ and Hutchings, IM (1993) Effects of erodent recycling in solid particle erosion testing. Wear, 162. pp. 139-147. ISSN 0043-1648

Shipway, PH and Hutchings, IM (1993) Influence of nozzle roughness on conditions in a gas-blast erosion rig. Wear, 162. pp. 148-158. ISSN 0043-1648

HUTCHINGS, I (1993) TRIBOLOGY IN POWDER TECHNOLOGY. TRIBOL INT, 26. p. 303. ISSN 0301-679X

Mouritz, AP and Hutchings, IM (1993) Abrasive wear of steels against silica-filled epoxy resins under combined rolling and sliding motion. Tribology International, 26. pp. 41-47. ISSN 0301-679X

Shipway, PH and Hutchings, IM (1993) Attrition of brittle spheres by fracture under compression and impact loading. Powder Technology, 76. pp. 23-30. ISSN 0032-5910

Ramm, DAJ and Hutchings, IM and Clyne, TW (1993) Erosion resistance and adhesion of composite metal/ceramic coatings produced by plasma spraying. Journal De Physique IV, 3. pp. 913-919. ISSN 1155-4339

Arnold, JC and Hutchings, IM (1993) Erosive wear of rubber by solid particles at normal incidence. Wear, 161. pp. 213-221. ISSN 0043-1648

Shipway, PH and Hutchings, IM (1993) Fracture of brittle spheres under compression and impact loading. II. Results for lead-glass and sapphire spheres. Philosophical Magazine A - Physics of Condensed Matter Structure Defects and Mechanical Properties, 67. pp. 1405-1421. ISSN 0141-8610

Shipway, PH and Hutchings, IM (1993) Fracture of brittle spheres under compression and impact loading: elastic stress distributions. Philosophical Magazine A - Physics of Condensed Matter Structure Defects and Mechanical Properties, 67. pp. 1389-1404. ISSN 0141-8610

Hutchings, IM (1993) Mechanisms of wear in powder technology. Powder Technology, 76. pp. 3-13. ISSN 0032-5910

Hutchings, IM (1993) Quick non graphical method for deducing slip systems in cubic close packed metals in tension or compression. Materials Science and Technology, 9. pp. 929-930. ISSN 0267-0836

Hutchings, IM (1993) Special issue on tribology in particle technology. Tribology International, 26. pp. 303-366. ISSN 0301-679X

Hutchings, IM (1993) Special issue on tribology in powder technology. Tribology International, 26. pp. 303-366. ISSN 0301-679X

Wakabayashi, T and Williams, JA and Hutchings, IM (1993) The action of gaseous lubricants in the orthogonal machining of an aluminum alloy by titanium nitride coated tools. Surface and Coatings Technology, 57. pp. 183-189. ISSN 0257-8972

ROGERS, PM and HUTCHINGS, IM and LITTLE, JA (1992) SURFACE-FEATURES ON A LOW-ALLOY STEEL EXPOSED IN A SIMULATED FLUIDIZED-BED COMBUSTOR ENVIRONMENT. WEAR, 154. pp. 269-285. ISSN 0043-1648

Rogers, PM and Hutchings, IM and Little, JA (1992) Surface features on a low-alloy steel exposed in a simulated fluidized-bed combustor environment. Wear, 154. pp. 269-285. ISSN 0043-1648

Arnold, JC and Hutchings, IM (1992) A model for the erosive wear of rubber at oblique impact angles. Journal of Physics D - Applied Physics, 25. A222-A229. ISSN 0022-3727

Mouritz, AP and Hutchings, IM (1992) Compressive failure of silica-filled epoxy-resins: influence of matrix strength, interfacial bond strength and porosity. Journal of Materials Science Letters, 11. pp. 1100-1103. ISSN 0261-8028

Hutchings, IM (1992) Ductile brittle transitions and wear maps for the erosion and abrasion of brittle materials. Journal of Physics D - Applied Physics, 25. A212-A221. ISSN 0022-3727

Sparks, AJ and Hutchings, IM (1992) Fracture due to repeated indentation in soda-lime glass. Journal of Materials Science Letters, 11. pp. 918-920. ISSN 0261-8028

Arnold, JC and Hutchings, IM (1992) Model for the erosive wear of rubber at oblique impact angles. Journal of Physics D: Applied Physics, 25. A222-A229. ISSN 0022-3727

Rogers, PM and Hutchings, IM and Little, JA (1992) TiN coatings for protection against combined wear and oxidation. Surface Engineering, 8. pp. 48-54. ISSN 0267-0844

Sparks, AJ and Hutchings, IM (1991) Transitions in the erosive wear behaviour of a glass ceramic. Wear, 149. pp. 99-110. ISSN 0043-1648

Zu, JB and Burstein, GT and Hutchings, IM (1991) A comparative-study of the slurry erosion and free-fall particle erosion of aluminum. Wear, 149. pp. 73-84. ISSN 0043-1648

Zu, JB and Burstein, GT and Hutchings, IM (1991) Comparative study of the slurry erosion and free-fall particle erosion of aluminum. Wear of Materials: International Conference on Wear of Materials, 1. pp. 417-423. ISSN 0192-4990

Shipway, PH and Hutchings, IM (1991) Influence of particle properties on the erosive wear of sintered boron carbide. Wear of Materials: International Conference on Wear of Materials, 1. pp. 63-70. ISSN 0192-4990

Sparks, AJ and Hutchings, IM (1991) Transitions in the erosive wear behavior of a glass-ceramic. Wear of Materials: International Conference on Wear of Materials, 1. pp. 367-374. ISSN 0192-4990

Arnold, JC and Hutchings, IM (1991) The erosive wear of elastomers. Journal of Natural Rubber Research, 6. p. 241-. ISSN 0127-7065

Shipway, PH and Hutchings, IM (1991) The influence of particle properties on the erosive wear of sintered boron-carbide. Wear, 149. pp. 85-98. ISSN 0043-1648

NINHAM, AJ and LITTLE, JA and HUTCHINGS, IM (1990) MECHANICAL-PROPERTIES OF SCALES FORMED UNDER COMBINED EROSION AND CORROSION. MATER SCI TECH SER, 6. pp. 69-72. ISSN 0267-0836

Oka, Y and Hutchings, IM (1990) Dependence on material hardness of erosion by solid particle impact. Boshoku Gijutsu, 39. pp. 610-616. ISSN 0010-9355

Zu, JB and Hutchings, IM and Burstein, GT (1990) Design of a slurry erosion test rig. Wear, 140. pp. 331-344. ISSN 0043-1648

Ninham, AJ and Hutchings, IM and Little, JA (1990) Erosion oxidation of austenitic and ferritic alloys. Corrosion, 46. pp. 296-301. ISSN 0010-9312

ROGERS, P and HUTCHINGS, I and LITTLE, J (1990) MICROSTRUCTURE AND GROWTH OF THIN OXIDE SCALE FORMED ON A LOW CHROMIUM STEEL DURING EROSIVE CORROSIVE DEGRADATION. Institute of Physics Conference Series, 98. pp. 175-178.

ROGERS, PM and HUTCHINGS, IM and LITTLE, JA (1990) MICROSTRUCTURE AND GROWTH OF THIN OXIDE SCALE FORMED ON A LOW CHROMIUM STEEL DURING EROSIVE CORROSIVE DEGRADATION. INST PHYS CONF SER. pp. 175-178. ISSN 0951-3248

Rogers, PM and Hutchings, IM and Little, JA (1990) Microstructure and growth of thin oxide scale formed on a low chromium steel during erosive corrosive degradation. Institute of Physics Conference Series. pp. 175-178. ISSN 0951-3248

Li, J and Hutchings, IM (1990) Resistance of cast polyurethane elastomers to solid particle erosion. Wear, 135. pp. 293-303. ISSN 0043-1648

HUTCHINGS, I and WANG, A (1990) WEAR OF ALUMINUM-ALUMINA METAL-MATRIX COMPOSITES BY ABRASION AND EROSION. Institute of Physics Conference Series, 111. pp. 91-100.

Ninham, AJ and Little, JA and Hutchings, IM (1990) The mechanical-properties of scales formed under combined erosion and corrosion. Materials Science and Technology, 6. pp. 69-72. ISSN 0267-0836

Arnold, JC and Hutchings, IM (1990) The mechanisms of erosion of unfilled elastomers by solid particle impact. Wear, 138. pp. 33-46. ISSN 0043-1648

Knight, JC and Page, TF and Hutchings, IM (1990) The surface deformation behaviour of TiC and TiN coated steels: part II - scratch response and friction. Surface Engineering, 6. p. 55-. ISSN 0267-0844

Mouritz, AP and Hutchings, IM (1989) Abrasive wear of steel during rolling-sliding contact with rock counterfaces. Wear of Materials: International Conference on Wear of Materials. pp. 41-49. ISSN 0192-4990

TIMOTHY, S and HUTCHINGS, I (1989) FORMATION OF ADIABATIC SHEAR BANDS BY THE IMPACT OF WEDGES AND CONES. Institute of Physcis Conference Series, 102. pp. 127-134.

Arnold, JC and Hutchings, IM (1989) Flux rate effects in the erosive wear of elastomers. Journal of Materials Science, 24. pp. 833-839. ISSN 0022-2461

Timothy, SP and Hutchings, IM (1989) Formation of adiabatic shear bands by the impact of wedges and cones. Institute of Physics Conference Series, 102. pp. 127-134. ISSN 0951-3248

Niham, AJ and Entwisle, MJ and Hutchings, IM and Little, JA (1989) Laboratory-scale fluidized bed rig for high-temperature tube wastage studies. pp. 583-589.

Arnold, JC and Hutchings, IM (1989) Mechanisms of erosion of unfilled elastomers by solid particle impact. Wear of Materials: International Conference on Wear of Materials. pp. 99-107. ISSN 0192-4990

Li, J and Hutchings, IM (1989) Resistance of cast polyurethane elastomers to solid particle erosion. Wear of Materials: International Conference on Wear of Materials. pp. 109-114. ISSN 0192-4990

Ninham, AJ and Hutchings, IM (1989) Solid particle erosion of boronized steels. Wear of Materials: International Conference on Wear of Materials. pp. 121-128. ISSN 0192-4990

Hutchings, IM and Levy, AV (1989) Thermal effects in the erosion of ductile metals. Wear, 131. pp. 105-121. ISSN 0043-1648

Wang, AG and Hutchings, IM (1989) Wear of alumina fiber aluminum metal matrix composites by 2-body abrasion. Materials Science and Technology, 5. pp. 71-77. ISSN 0267-0836

Mouritz, AP and Hutchings, IM (1989) The abrasive wear of steel during rolling-sliding contact with rock counterfaces. Wear, 134. pp. 99-113. ISSN 0043-1648

Mercer, AP and Hutchings, IM (1989) The deterioration of bonded abrasive papers during the wear of metals. Wear, 132. pp. 77-97. ISSN 0043-1648

Knight, JC and Page, TF and Hutchings, IM (1989) The influence of substrate hardness on the response of tin-coated steels to surface deformation. Thin Solid Films, 177. pp. 117-132. ISSN 0040-6090

Wang, AG and Hutchings, IM (1989) The number of particle contacts in 2-body abrasive wear of metals by coated abrasive papers. Wear, 129. pp. 23-35. ISSN 0043-1648

Arnold, JC and Hutchings, IM (1988) Electron-beam damage in scanning electron-microscopy of worn elastomer surfaces. Wear, 128. pp. 339-342. ISSN 0043-1648

Mercer, AP and Hutchings, IM (1988) The influence of atmospheric composition on the abrasive wear of titanium and ti-6al-4v. Wear, 124. pp. 165-176. ISSN 0043-1648

Arnold, JC and Hutchings, IM (1988) Electron-beam damage in scanning electron-microscopy of worn elastomer surfaces. Wear, 128. pp. 339-342. ISSN 0043-1648

Hutchings, IM and Wang, AG (1988) Fracture under point loading of brittle fibers in a ductile matrix. Philosophical Magazine A: Physics of Condensed Matter Structure Defects and Mechanical Properties, 57. pp. 197-206. ISSN 0141-8610

Wang, AG and Hutchings, IM (1988) Mechanisms of abrasive wear in a boronized alloy-steel. Wear, 124. pp. 149-163. ISSN 0043-1648

Hutchings, IM and Deuchar, DWT and Muhr, AH (1987) Erosion of unfilled elastomers by solid particle impact. Journal of Materials Science, 22. pp. 4071-4076. ISSN 0022-2461

Mercer, AP and Hutchings, IM (1987) INFLUENCE OF ATMOSPHERIC COMPOSITION ON THE ABRASIVE WEAR OF TITANIUM AND Ti-6Al-4V. Wear of Materials: International Conference on Wear of Materials, 2. pp. 627-633. ISSN 0192-4990

Wang, AG and Hutchings, IM (1987) MECHANISMS OF ABRASIVE WEAR IN A BORONIZED ALLOY STEEL. Wear of Materials: International Conference on Wear of Materials, 2. pp. 717-724. ISSN 0192-4990

Hutchings, IM (1987) Wear by particulates. Chemical Engineering Science, 42. pp. 869-878. ISSN 0009-2509

Timothy, SP and Pearson, JM and Hutchings, IM (1987) The contact pressure distribution during plastic compression of lead spheres. International Journal of Mechanical Sciences, 29. pp. 713-719. ISSN 0020-7403

Timothy, SP and Hutchings, IM (1986) The impact of a soft metal sphere on a hard metal target: II - deformation of the target. Philosophical Magazine A: Physics of Condensed Matter Structure Defects and Mechanical Properties, 54. pp. 103-113. ISSN 0141-8610

Timothy, SP and Hutchings, IM (1986) Adiabatic shear band fracture surfaces in a titanium-alloy. Journal of Materials Science Letters, 5. pp. 453-454. ISSN 0261-8028

Ninham, AJ and Hutchings, IM (1986) On the morphology of thermochemically produced fe2b/fe interfaces. Journal of Vacuum Science and Technology A: Vacuum Surfaces and Films, 4. pp. 2827-2831. ISSN 0734-2101

Timothy, SP and Hutchings, IM (1986) The impact of a soft metal sphere on a hard metal target; 1. deformation of the sphere. Philosophical Magazine A: Physics of Condensed Matter Structure Defects and Mechanical Properties, 54. pp. 93-102. ISSN 0141-8610

Mercer, AP and Hutchings, IM (1985) INFLUENCE OF ATMOSPHERIC HUMIDITY ON THE ABRASIVE WEAR OF METALS. Wear of Materials: International Conference on Wear of Materials. pp. 332-337. ISSN 0192-4990

Timothy, SP and Hutchings, IM (1985) Initiation and growth of microfractures along adiabatic shear bands in ti-6al-4v. Materials Science and Technology, 1. pp. 526-530. ISSN 0267-0836

Mercer, AP and Hutchings, IM (1985) The influence of atmospheric humidity on the abrasive wear of metals. Wear, 103. pp. 205-215. ISSN 0043-1648

Timothy, SP and Hutchings, IM (1985) The structure of adiabatic shear bands in a titanium-alloy. Acta Metallurgica, 33. pp. 667-676. ISSN 0001-6160

Timothy, SP and Hutchings, IM (1984) Adiabatic shear bands in a titanium-alloy resulting from ballistic impact at high and low-temperatures. Institute of Physics Conference Series, 70. pp. 397-404. ISSN 0951-3248

Field, JE and Hutchings, IM (1984) Impact erosion processes. Institute of Physics Conference Series, 70. pp. 349-371. ISSN 0951-3248

Field, JE and Hutchings, IM (1984) Impact erosion processes. Institute of Physics Conference Series, 70. pp. 349-371. ISSN 0951-3248

Timothy, SP and Hutchings, IM (1984) Influence of adiabatic shear bands on the fatigue-strength of a titanium-alloy. Fatigue of Engineering Materials and Structures, 7. pp. 223-227. ISSN 0160-4112

Kukureka, SN and Hutchings, IN (1984) Mechanical properties of engineering polymers at strain rates up to 500 s-1. International Journal Mechanical Sciences, 26. pp. 617-623. ISSN 0020-7403

Chaudhri, MM and Hutchings, IM and Makin, PL (1984) Plastic compression of spheres. Philosophical Magazine A: Physics of Condensed Matter Structure Defects and Mechanical Properties, 49. pp. 493-503. ISSN 0141-8610

CHAUDHRI, MM and HUTCHINGS, IM (1984) STRENGTH MEASUREMENTS ON RAPIDLY SOLIDIFIED METAL PARTICLES. J MATER SCI LETT, 3. pp. 79-82. ISSN 0261-8028

Chaudhri, MM and Hutchings, IM (1984) Strength measurements on rapidly solidified metal particles. Journal of Materials Science Letters, 3. pp. 79-82. ISSN 0261-8028

KUKUREKA, SN and HUTCHINGS, IM (1984) YIELDING OF ENGINEERING POLYMERS AT STRAIN RATES OF UP TO 500S-1. INT J MECH SCI, 26. pp. 617-623. ISSN 0020-7403

Kukureka, SN and Hutchings, IM (1984) Yielding of engineering polymers at strain rates of up to 500 s-1. International Journal of Mechanical Sciences, 26. pp. 617-623. ISSN 0020-7403

Cousens, AK and Hutchings, IM (1983) A critical-study of the erosion of an aluminum-alloy by solid spherical-particles at normal impingement. Wear, 88. pp. 335-348. ISSN 0043-1648

HUTCHINGS, IM (1983) INTRODUCTION TO THE MICROSCOPY OF EROSION. J MICROSC-OXFORD, 130. pp. 331-338. ISSN 0022-2720

Hutchings, IM (1983) Introduction to the microscopy of erosion. Journal of Microscopy, 130. pp. 331-338. ISSN 0022-2720

Hutchings, IM and Macmillan, NH and Rickerby, DG (1981) Further-studies of the oblique impact of a hard-sphere against a ductile solid. International Journal of Mechanical Sciences, 23. pp. 639-646. ISSN 0020-7403

Hutchings, IM and O'Brien, TJ (1981) Normal impact of metal projectiles against a rigid target at low velocities. International Journal of Mechanical Sciences, 23. pp. 255-261. ISSN 0020-7403

Hutchings, IM (1981) A model for the erosion of metals by spherical-particles at normal incidence. Wear, 70. pp. 269-281. ISSN 0043-1648

Hutchings, IM (1980) Recent advances in the understanding of solid particle erosion. Mécanique, Matériaux, Electricité, 365. p.185-. ISSN 0025-6439

Hutchings, IM (1979) Energy absorbed by elastic-waves during plastic impact. Journal of Physics D: Applied Physics, 12. pp. 1819-1824. ISSN 0022-3727

Hutchings, I (1978) Bouncing bombs of 2nd-world-war. New Scientist, 77. pp. 563-567. ISSN 0262-4079

HUTCHINGS, IM (1978) ESTIMATION OF YIELD STRESS IN POLYMERS AT HIGH STRAIN-RATES USING G. I. TAYLORS IMPACT TECHNIQUE. J MECH PHYS SOLIDS, 26. pp. 289-301. ISSN 0022-5096

Briscoe, BJ and Hutchings, IM (1978) Impact yielding of high-density polyethylene. Polymer, 19. p. 1110. ISSN 0032-3861

Hutchings, IM (1977) Deformation of metal-surfaces by oblique impact of square plates. International Journal of Mechanical Sciences, 19. p.45-. ISSN 0020-7403

Hutchings, IM (1977) Direct display of gas-gun projectile velocity. Review of Scientific Instruments, 48. pp. 923-925. ISSN 0034-6748

Hutchings, IM and Rochester, MC and Camus, JJ (1977) Rectangular-bore gas gun. Journal of Physics E: Scientific Instruments, 10. pp. 455-457. ISSN 0022-3735

Hutchings, IM (1977) Strain rate effects in microparticle impact. Journal of Physics D: Applied Physics, 10. L179-L184. ISSN 0022-3727

Briscoe, BJ and Hutchings, IM (1976) Impact yielding of high-density polyethylene. Polymer, 17. pp. 1099-1102. ISSN 0032-3861

Hutchings, IM (1976) Ricochet of spheres and cylinders from surface of water. International Journal of Mechanical Sciences, 18. pp. 243-247. ISSN 0020-7403

Hutchings, IM and Winter, RE and Field, JE (1976) Solid particle erosion of metals - removal of surface material by spherical projectiles. Proceedings of the Royal Society of London Series A, Mathematical Physical and Engineering Sciences, 348. p.379-. ISSN 1364-5021

Hutchings, IM and Winter, RE (1975) Erosion of ductile metals by spherical-particles. Journal of Physics D: Applied Physics, 8. pp. 8-14. ISSN 0022-3727

Hutchings, IM (1975) Prediction of resistance of metals to erosion by solid particles. Wear, 35. pp. 371-374. ISSN 0043-1648

Winter, RE and Hutchings, IM (1975) Role of adiabatic shear in solid particle erosion. Wear, 34. pp. 141-148. ISSN 0043-1648

Hutchings, IM and Winter, RE (1975) Simple small-bore laboratory gas-gun. Journal of Physics E: Scientific Instruments, 8. pp. 84-86. ISSN 0022-3735

HUTCHINGS.IM, and WINTER, R (1974) PARTICLE EROSION OF DUCTILE METALS - MECHANISM OF MATERIAL REMOVAL. WEAR, 27. pp. 121-128. ISSN 0043-1648

WINTER, RE and HUTCHING.IM, (1974) SOLID PARTICLE EROSION STUDIES USING SINGLE ANGULAR PARTICLES. WEAR, 29. pp. 181-194. ISSN 0043-1648

FIELD, J and HAUSER, H and HUTCHINGS.IM, and WOODWARD, A (1974) STRENGTH TESTING OF DIAMOND. IND DIAMOND REV. pp. 255-259. ISSN 0019-8145

Book

Hutchings, IM (2012) Inkjet Technology for Digital Fabrication. Wiley-Blackwell, -. ISBN 0470681985,9780470681985

Hutchings, Ian Michael, ed. (1997) New directions in tribology. Mechanical Engineering Publications for the Institution of Mechanical Engineers, Bury St. Edmunds, Great Britain. ISBN 1860580998

Hutchings, Ian Michael, ed. (1995) Proceedings of the 8th International Conference on Erosion by Liquid and Solid Impact. Wear, 186/18 . Elsevier, Lausanne, Switzerland, -.

Hutchings, IM (1992) Tribology: friction and wear of engineering materials. Butterworth-Heinemann Ltd, -. ISBN 034056184X

Book Section

Hutchings, IM and Martin, GD (2012) Introduction to inkjet printing for manufacturing. In: Inkjet technology for digital fabrication. Wiley-Blackwell. ISBN 978-0-470-68198-5

Martin, GD and Hutchings, IM (2012) Fundamentals of inkjet technology. In: Inkjet technology for digital fabrication. Wiley-Blackwell. ISBN 978-0-470-68198-5

Hutchings, IM and Gee, M., and Santner, E., (2011) Friction and Wear. In: Springer Handbook of Metrology and Testing. Springer, pp. 743-768. ISBN 978-3-642-16640-2

Hutchings, IM and Gee, MG and Santner, E (2006) Friction and wear. In: Springer Handbook of Materials Measurement Methods. Springer-Verlag, pp. 685-710. ISBN 3540207856

Hutchings, IM (2005) The challenge of wear. In: Wear: Materials, Mechanisms and Practice. Tribology in Practice Series . John Wiley and Sons Limited, Chichester, UK, pp. 1-7. ISBN 9780470016282

Hutchings, IM (2003) Total tribology. In: Materials in Tribology: opportunities and challenges. Professional Engineering Publishing/Wiley & Son, Bury St Edmunds, UK, pp. 27-38. ISBN 1860583938

Hutchings, IM (2002) Biotribology - a personal view. In: Friction, Lubrication, and Wear of Artificial Joints. Professional Engineering Publishing/Wiley & Son, London, UK, pp. 1-6. ISBN 1860583636

Hutchings, IM and Wang, PZ and Parry, GC (2002) An optical method for assessing scratch damage in bulk materials and coatings. In: Contributions of Surface Engineering to Modern Manufacturing and Remanufacturing. UNSPECIFIED, pp. 24-29.

De Mello, JDB and Hutchings, IM (2001) Surface durability of steam-oxidized sintered iron: effect of surface topography. In: Tribology 2001. Austrian Tribology Society, Vienna, pp. 105-112. ISBN 390165707X

Hutchings, IM (2001) Wear and lubrication. In: Encyclopaedia of Materials Science and Technology. Elsevier Science . Elsevier, Amsterdam, Netherlands, pp. 9551-9556. ISBN 0080431526

Hutchings, IM (2000) Applications of the micro-scale abrasion test for coatings and bulk materials. In: Tribology Series. Elsevier Tribology Series, 38 . Elsevier, pp. 37-42.

Hutchings, IM (2000) Solid particle erosive wear testing. In: ASM Handbook: Mechanical Testing and Evaluation. ASM International, Materials Park, OH, USA, pp. 338-345. ISBN 0871703890

Hutchings, IM and Wilson, S and Alpas, AT (2000) Wear of aluminum-based composites. In: Metal Matrix Composites. Comprehensive Composite Materials, 3 . Elsevier, Oxford, UK, pp. 501-519. ISBN 0080437214

Williams, JA and Hutchings, IM and Liew, WYH (2000) The influence of the environmental process conditions on the machining of aluminium alloys. In: Characteristics of Interacting Surfaces - A Key Factor in Sustainable and Economic Products. Proceedings of the 1st International Conference on Tribology in Environmental Design 2000 . Professional Engineering Publishing Ltd, Bury St. Edmunds, UK, pp. 175-184. ISBN 1860582664

Choudhury, M and Hutchings, IM (1998) Effects of gamma irradiation and ageing on abrasive wear of UHMWPE. In: Actualitès en Biomatèriaux. Romillat, pp. 53-62. ISBN 287894030X

Morrison, NA and Muhl, S and Rodil, SE and Milne, WI and Robertson, J and Weiler, M and Wang, PZ and Hutchings, I and Stolojan, V and Brown, LM (1998) High rate deposition of ta-C : H using an electron cyclotron wave resonance plasma source. In: Covalently Bonded Disordered Thin-Film Materials. Materials Research Society Symposium Proceedings, 498 . Materials Research Society, pp. 147-152. ISBN 1558994033

Choudhury, M and Hutchings, IM (1998) Stress-induced phase transformations and molecular structural changes in irradiated ultra-high molecular weight polyethylene tibial components. In: Actualites en Biomateriaux. Romillat, Paris, France, pp. 63-74.

Greer, AL and Zhong, ZC and Jiang, XY and Rutherford, KL and Hutchings, IM (1997) Al-Y-Ni nanophase composites by devitrification - Microstructure, hardness and abrasive wear resistance. In: Chemistry and Physics of Nanostructures and Related Non-Equilibrium Materials. Tms, pp. 3-12. ISBN 978-0873393539

Greer, AL and Zhong, ZC and Jiang, XY and Rutherford, KL and Hutchings, IM (1997) Al-Y-Ni nanophase composites by devitrification - microstructure, hardness and abrasive wear resistance. In: Chemistry and Physics of Nanostructures and Related Non-Equilibrium Materials. Minerals, Metals, & Materials Society, pp. 3-12.

de Silveira, G and Hutchings, IM (1997) Determination of the friction of paper and board. In: Fundamentals of Papermaking Materials. Pira International, pp. 1329-1353. ISBN 1858022096

Biggs, T and Taylor, SS and Rutherford, KL and Hutchings, IM (1997) The wear behavior of some platinum alloys. In: Precious Metals. IPMI - International Precious Metals Institute, pp. 331-346. ISBN 1881825183

Burstein, GT and Li, Y and Hutchings, IM (1995) Aspects of the slurry erosion-corrosion of aluminum. In: Extended Abstracts: Spring - Reno, Nevada. The Electrochemical Society, Princeton, N.J, p. 265-. ISBN 1566771072,9781566771078

Hutchings, IM (1995) Development of wear maps for the abrasion and erosion of ceramic materials. In: Advanced Ceramics for Structural and Tribological Applications. CIM, Vancouver, Canada, pp. 127-138. ISBN 0919086608

Hutchings, IM (1992) Transitions, threshold effects and erosion maps. In: Erosion of Ceramic Materials. Key Engineering Materials, 71 . Trans Tech Publications, pp. 75-92. ISBN 0878496378

Wang, AG and Hutchings, IM (1990) Erosion of short delta-alumina fibre aluminium metal matrix composites by solid particles. In: Metal and Ceramic Matrix Composites: Processing, Modelling and Mechanical Behaviour. The Minerals, Metals & Materials Society, Anaheim, CA, pp. 499-508. ISBN 0873391195

Hutchings, IM and Wang, A (1990) Wear of aluminum-alumina metal-matrix composites by abrasion and erosion. In: New Materials and Their Applications: International Symposium Proceedings. Institute of Physics Conference Series . Institute of Physics Publishing, pp. 91-100. ISBN 0854980490

Elliott, DM and Hutchings, IM (1990) Deformation and fracture of hard coatings during plastic indentation. In: Mechanics of Coatings. Tribology Series . Elsevier Science, pp. 445-449. ISBN 0444886761

Ninham, AJ and Little, JA and Hutchings, IM and Meadowcroft, DB (1990) Temperature gradient effects in errosion-corrosion. In: Corrosion-Erosion-Wear of Materials of Elevated Temperatures. NACE, Houston, Texas, U.S.A.. ISBN 1877914185

Hutchings, IM (1990) Wear in the next decade. In: Reibung und Verschleiþ bei metallischen und nichtmetallischen Werkstoffen. Deutsche Gesellschaft fur Materialkunde, pp. 3-14.

Rogers, PM and Hutchings, IM and Little, JA (1990) The erosion-corrosion of a nitrocarburized low alloy steel. In: Surface Engineering. Elsevier Science, pp. 29-38. ISBN 1851665072

Entwisle, MJ and Gibb, J and Hutchings, IM and Little, JA and Meadowcroft, DB and Ninham, AJ and Oakey, J and Simms, N (1990) The laboratory simulation of fluidized bed tube wastage. In: High Temperature Materials for Power Engineering. Kluwer, Dordrecht, pp. 239-248. ISBN 0792309278

Hutchings, IM (1988) Surface impact damage. In: Tribology in Particulate Technology. Institute of Physics Publishing, Chapter 4.7-. ISBN 0852744250

Field, JE and Hutchings, IM (1987) Surface response to impact. In: Materials at High Strain Rates. Springer-Verlag, Chapter 7-. ISBN 1851660674

Hutchings, IM (1983) The behaviour of metals under ballistic impact at sub-ordnance velocities. In: Materials Behaviour under High Stress and Ultra-high Loading Rates. Plenum Press, p.161-.

Timothy, SP and Hutchings, IM (1981) Microstructural features associated with ballistic impact in Ti-6Al-4V. In: Proceedings of the 7th International Conference on High Energy Rate Fabrication. Leeds University, Leeds, UK.

Hutchings, IM (1979) Mechanisms of the erosion of metals by solid particles. In: Erosion: Prevention and Useful Applications. ASTM Special Technical Publication, 664 . ASTM International. ISBN 0803103344

Conference or Workshop Item

Hoath, SD and Hsiao, W-K and Jung, S-J and Martin, GD and Hutchings, IM (2011) Dependence of Drop Speed on Nozzle Diameter, Viscosity and Drive Amplitude in Drop-on-Demand Ink-Jet Printing. In: NIP27: The 27th International Conference on Digital Printing Technologies and Digital Fabrication 2011, 2-10-2011 to 6-10-2011, Minneapolis, Minnesota pp. 62-65..

Martin, GD and Castrejon-Pita, JR and Hutchings, IM (2011) Holographic Measurement of Drop-on-Demand Drops in Flight. In: NIP27: The 27th International Conference on Digital Printing Technologies and Digital Fabrication 2011, 2-10-2011 to 6-10-2011, Minneapolis, Minnesota pp. 620-623..

Hsiao, W-K and Hoath, SD and Martin, GD and Hutchings, IM (2011) Jetting, In-Nozzle Meniscus Motion and Nozzle-Plate Flooding in An Industrial Drop-on-Demand Print Head. In: NIP27: The 27th International Conference on Digital Printing Technologies and Digital Fabrication 2011, 2-10-2011 to 6-10-2011, Minneapolis, Minnesota pp. 66-69..

Castrejon-Pita, JR and Hoath, SD and Castrejon-Pita, AA and Morrison, NF and Hsiao, W-K and Hutchings, IM (2011) Ultra-High Speed Particle Image Velocimetry on Drop-on-Demand Jetting. In: NIP27: The 27th International Conference on Digital Printing Technologies and Digital Fabrication 2011, 2-10-2011 to 6-10-2011, Minneapolis, Minnesota pp. 93-96..

Hoath, SD and Martin, GD and Hutchings, IM (2010) Improved models For DoD Ink-Jet Shortening. In: NIP26: 26th International Conference on Digital Printing Technologies and Digital Fabrication 2010, 19-9-2010 to 23-9-2010, Austin, Texas pp. 353-355..

Hutchings, IM (2010) Ink-jet printing for the decoration of ceramic tiles: technology and opportunities. In: Qualicer '10, 11th World Congress on Ceramic Tile Quality, 15-2-2010 to 16-2-2010, Castellon, Spain.

Hutchings, IM (2009) Ink-jet printing in micro-manufacturing: opportunities and limitations. In: 4M/ICOMM 2009 - The Global Conference on Micro Manufacture, 23-9-2009 to 25-9-2009, Forschungszentrum Karlsruhe, Karlsruhe, Germany pp. 47-57..

Castrejon Pita, JR and Martin, GD and Hutchings, IM (2009) A large-scale print-head for drop-on-demand and continuous ink jet studies. In: NIP25: International Conference on Digital Printing Technologies and Digital Fabrication 2009, 20-9-2009 to 24-9-2009, Louisville, KY, USA 107-..

Hoath, SD and Martin, GD and Hutchings, IM (2009) A model for jet shortening in drop-on-demand ink-jet printing. In: NIP25: International Conference on Digital Printing Technologies and Digital Fabrication 2009, 20-9-2009 to 24-9-2009, Louisville, KY, USA p. 75..

Jung, S and Hoath, SD and Martin, GD and Hutchings, IM (2009) A new method to assess the jetting behaviour of drop-on-demand inkjet fluids. In: NIP25: International Conference on Digital Printing Technologies and Digital Fabrication 2009, 20-9-2009 to 24-9-2009, Louisville, KY, USA 719-..

Hoath, SD and Martin, GD and Hutchings, IM (2009) Methods and Results from the Cambridge Inkjet Research Centre. In: NANOTECH CONFERENCE & EXPO 2009, 3-5-2009 to 7-5-2009, Houston, Texas pp. 498-500..

Hsiao, WK and Martin, GD and Hoath, SD and Hutchings, IM (2008) Ink drop deposition and spreading in inkjet based printed circuit board fabrication. In: NIP24: International Conference on Digital Printing Technologies and Digital Fabrication 2008, 7-9-2008 to 12-9-2008, Pittsburgh, Pennsylvania, USA pp. 667-670..

Costa, HL and Hutchings, IM (2008) Ink-jet printing for patterning engineering surfaces. In: NIP24: International Conference on Digital Printing Technologies and Digital Fabrication 2008, 7-9-2008 to 12-9-2008, Pittsburgh, Pennsylvania, USA pp. 260-263..

Hoath, SD and Martin, GD and Tuladhar, T and Mackley, M and Hutchings, IM (2008) Links between fluid rheology and drop-on-demand jetting and printability. In: NIP24: International Conference on Digital Printing Technologies and Digital Fabrication 2008, 7-9-2008 to 12-9-2008, Pittsburgh, Pennsylvania, USA pp. 130-133..

Sato, J and Hutchings, IM (2008) Non-destructive testing of paper products by infra-red thermography. In: Progress in Paper Physics Seminar, 2-6-2008 to 5-6-2008, Helsinki, Finland pp. 267-270..

Hoath, SD and Martin, GD and Castrejon Pita, JR and Hutchings, IM (2007) Satellite formation in drop-on-demand printing of polymer solutions. In: Proceedings of the 23nd International Conference on Non-impact Printing, 16-9-2007 to 21-9-2007, Anchorage, Alaska, U.S.A. pp. 331-335..

Hoath, SD and Hutchings, IM and Martin, GD (2007) Drop-on-demand jetting of dilute polymer solutions. In: 3rd International Inkjet Printing Workshop, Eindhoven (June 2007), -6-2007 to --, Einhoven.

Sato, J and Hutchings, IM and Woodhouse, J (2007) Determination of the dynamic elastic properties of paper and paperboard from the low-frequency vibration modes of rectangular plates. In: 61st Appita Annual Conference and Exhibition, 6-5-2007 to 9-5-2007, Gold Coast, Australia.

Sato, J and Hutchings, IM and Woodhouse, J (2007) Determination of the dynamic elastic properties of paper and paperboard from the low-frequency vibration modes of the rectangular plates. In: Proceedings of 2007 International Paper Physics Conference, 7-5-2007 to 10-5-2007, Queensland, Australia.

Hutchings, IM and Martin, GD and Hoath, SD and Morgan, RH (2006) High speed imaging and analysis of jet and drop formation. In: The 22nd International Conference on Digital Printing Technologies (NIP 22), 17-9-2006 to 22-9-2006 pp. 91-94..

Martin, GD and Hutchings, IM and Hoath, SD (2006) Jet formation and late-stage ligament instability in drop-on-demand printing. In: The 22nd International Conference on Digital Printing Technologies (NIP 22), 17-9-2006 to 22-9-2006, Denver, Colorado pp. 95-98..

Hutchings, IM and Xu, Y and Sanchez, E.E., and Ibanez, MJ and Quereda, MF (2006) Optimisation of the polishing process for porcelain ceramic tiles. In: The World Congress on Ceramic Tile Quality, --2006 to --, Castello, Spain pp. 389-414..

Hutchings, IM (2005) The Role of particle motion in abrasive and erosive wear. In: 3rd the World Tribology Congress; Vol. 1, -9-2005 to -- pp. 5-6..

Burstein, GT and Sasaki, K and McAleese, C and Hutchings, IM (2004) Some observations describing the electrochemical surface annealing of austenitic stainless steel. In: The 7th International Symposium on Electrode Processes, --2004 to -- pp. 255-263..

Hutchings, IM and Adachi, K and Xu, Y and Sanchez, E and Ibanez, MJ (2004) Laboratory simulation of the industrial ceramic tile polishing process. In: The 8th World Congress on Ceramic Tile Quality, --2004 to -- pp. 1-19..

Kusano, Y and Barber, ZH and Evetts, JE and Hutchings, IM (2003) Influence of inert gases on ionized magnetron plasma deposition of carbon nitride thin films. In: UNSPECIFIED pp. 601-605..

Misra, RDK and Dasari, A and Wang, P and Hutchings, IM and Duncan, SJ and Mullen, P and Jenkins, L (2002) Surface damage processes in mechanically-deformed thermoplastic olefins. In: The Society of Plastic Engineers (SPE) 4th Automotive TPO Global Conference 2002, 4, --2002 to -- pp. 177-192..

Hutchings, IM (2001) Keynote: abrasion process in wear manufacturing. In: EUROMAT 2001: Polymer Processing and Structure Relationships, 10-6-2001 to 14-6-2001, Rimini, Italy.

Wang, P and Hutchings, IM and Duncan, SJ and Jenkins, L (2001) Effect of crystallinity on scratch behavior and other properties of TPO. In: Automotive TPO Global Conference, -10-2001 to --, Dearborn, MI pp. 201-212..

Williams, JA and Hutchings, IM and Liew, WYH (2000) The influence of the environmental process conditions on the machining of aluminium alloys. In: The 1st International Conference on Tribology in Environmental Design, -9-2000 to -- pp. 175-184..

Walter, G and Heuer, V and Hutchings, IM (2000) Prediction of erosion damage to fibre linings in industrial furnaces. In: 5th European Conference on Industrial Furnaces and Boilers, 11-4-2000 to 14-4-2000, Porto, Portugal.

Wang, PZ and Hutchings, IM and Duncan, SJ and Jenkins, L and Woo, E (2000) Perception and mechanism of scratches in polymer materials for automotive applications. In: 7th International Conference on TPO in Automotive, 23-10-2000 to 25-10-2000, Michigan, USA.

Parry, GC and Hutchings, IM (2000) Visual perception of scratch damage on sol-gel derived coatings on aluminium 2117T8 substrates. In: The International Tribology Conference 2000, 2, -10-2000 to -- pp. 943-948..

Imbeni, V and Hutchings, IM and Breslin, MC (1999) Abrasive wear behaviour of an Al2O3-Al co-continuous composite. In: The International Conference on Erosion by Liquid and Solid Impact, -9-1998 to -- pp. 462-467..

Dube, NB and Hutchings, IM (1999) Influence of particle fracture in the high-stress and low-stress abrasive wear of steel. In: The International Conference on Erosion by Liquid and Solid Impact, -9-1998 to -- pp. 246-256..

Christou, C and Kusano, Y and Chiu, KF and Hutchings, IM and Barber, ZH (1999) Characterisation of ionised magnetron sputtering plasmas for thin film deposition. In: International Conference on Phenomena in Ionized Gases, 11-7-1999 to 16-7-1999, Warsaw, Poland pp. 35-36..

Wang, PZ and Hutchings, IM and Duncan, SJ and Jenkins, L (1999) A quantitative characterization technique for scratched polymer surfaces. In: TPOs in Automotive, --1999 to --, Detroit, Michigan, U.S.A..

Richter, J and Hutchings, IM and Clyne, TW and Peng, X (1998) Diamond-like carbon films on sintered carbides - technology and wear resistance evaluation. In: The Powder Metallurgy World Congress and Exhibition, -10-1998 to -- pp. 185-190..

Hutchings, IM (1997) Abrasive and erosive wear tests for thin coatings: a unified approach. In: 1st World Tribology Congress, 8-9-1997 to 12-9-1997, London, UK pp. 269-280..

Pickles, MJ and Hutchings, IM and Ramamurthy, AC (1997) Influence of baking conditions on the impact durability of automobile paint systems. In: 30th International Symposium on Automotive Technology and Automation (30th ISATA), 16-6-1997 to 19-6-1997, Florence, Italy pp. 897-904..

Pickles, MJ and Hutchings, IM (1997) Scratch testing: a means of characterising the in-service performance of automotive polymers. In: 30th International Symposium on Automotive Technology and Automation (30th ISATA), 16-6-1997 to 19-6-1997, Florence, Italy pp. 391-398..

Wakabayashi, T and Williams, JA and Hutchings, IM (1997) Fundamental studies of the action of gaseous lubricants for safe machining in space environments. In: International Conference on Reliability and Safety Engineering, --1997 to --, Kagawa.

Trezona, RI and Hutchings, IM and Ramamurthy, AC (1997) A new technique for determining the micro-scale abrasion resistance of automotive clearcoats. In: International Symposium on Automotive Technology and Automation, --1997 to --, Florence pp. 913-920..

Choudhury, M and Hutchings, IM (1996) Phase transformations and molecular alignment induced by gamma irradiation and deformation in ultra high molecular weight polyethylene. In: 5th World Biomaterials Congress, 29-5-1996 to 2-6-1996, Toronto, Canada 293-..

Whitmore, LC and Hutchings, IM and Puttick, KE and Gee, AE (1996) Amorphous silicon produced in ultra-fine machining of wafers: microstructure and hardness. In: MRS Spring Meeting, 8-4-1996 to 12-4-1996, San Francisco, California, U.S.A..

Hutchings, IM (1996) Deformation and fracture of brittle particles. In: Solid-Solid Interactions: the First Royal Society - Unilever Indo-U.K Forum in Materials Science and Engineering, -- to -- pp. 211-224..

LI, Y and BURSTEIN, GT and HUTCHINGS, IM (1995) INFLUENCE OF ENVIRONMENTAL COMPOSITION AND ELECTROCHEMICAL POTENTIAL ON THE SLURRY EROSION-CORROSION OF ALUMINUM. In: UNSPECIFIED pp. 70-79..

Hutchings, IM and Shipway, PH (1993) Improved method of testing durability and adhesion of paints and other coatings. In: 26th International Symposium on Automotive Technology and Automation (ISATA 26), 13-9-1993 to 17-9-1993, Aachen, Germany pp. 165-170..

RAMM, DAJ and HUTCHINGS, IM and CLYNE, TW (1993) EROSION RESISTANCE AND ADHESION OF COMPOSITE METAL/CERAMIC COATINGS PRODUCED BY PLASMA SPRAYING. In: UNSPECIFIED pp. 913-919..

Wakabayashi, T and Williams, JA and Hutchings, IM (1992) The action of gaseous lubricants in metal cutting. In: 6th Joint IMechE/IOP Meeting, 10-4-1992 to --, London, UK pp. 33-40..

ZU, JB and BURSTEIN, GT and HUTCHINGS, IM (1991) A COMPARATIVE-STUDY OF THE SLURRY EROSION AND FREE-FALL PARTICLE EROSION OF ALUMINUM. In: UNSPECIFIED pp. 73-84..

Hutchings, IM (1991) Abrasive and erosive wear of metal-matrix composites. In: Proceedings of the 2nd European Conference on Advanced Materials and Processes, Euromat '91, 22-7-1991 to 24-7-1991, Cambridge, UK.

Zhang, XX and Hutchings, IM and Clyne, TW (1991) The effect of deposition conditions on the erosive wear resistance of plasma sprayed alumina coatings, vol. 1, 332-337. In: 2nd European Conference on Advanced Materials and Processes, 22-7-1991 to 24-7-1991, Cambridge.

Qureshi, MI and Hutchings, IM and Ajmal, M (1991) Influence of cyclic deformation on the shape memory and transformation characteristics of a ternary Cu-Zn-Al alloy. In: Proceedings of the 2nd International Symposium on Advanced Materials, --1991 to --, Islamabad pp. 248-254..

Qureshi, MI and Hutchings, IM (1991) Influence of deformation rate on mechanical, shape memory and transformation characteristics of a Cu-Zn-Al shape memory alloy. In: Proceedings of the 2nd International Symposium on Advanced Materials, --1991 to --, Islamabad 98-..

Qureshi, MI and Hutchings, IM (1991) Thermal cycling of a Cu-Zn-Al shape memory alloy. In: Proceedings of the 2nd International Symposium on Advanced Materials, --1991 to --, Islamabad 99-..

Mouritz, P and Hutchings, IM (1990) The abrasive wear of rock drill bit materials. In: Conference: Materials United in the Service of Man, 17-9-1990 to 21-9-1990, Perth, Australia.

Hutchings, IM and Little, JA and Ninham, AJ (1990) Low velocity erosion-corrosion of steels in a fluidized bed. In: 4th Berkeley Conference on Corrosion-Erosion-Wear of Materials at Elevated Temperatures, 31-1-1990 to 2-2-1990, Berkely, California, U.S.A. pp. 14-1..

Zhang, XX and Hutchings, IM and Clyne, TW (1988) The resistance of plasma-sprayed alumina coatings to solid particle erosion. In: International Conference on Plasma Spraying, -11-1988 to --, Paris, France.

Little, JA and Hutchings, IM and Entwisle, MJ (1987) Erosion-corrosion testing of fluidized bed combustor materials: a new experimental method. In: Conference on Corrosion, Erosion and Wear of Materials at Elevated Temperatures, --1987 to --, Berkeley, CA, USA 324-..

Entwisle, MJ and Hutchings, IM and Little, JA (1987) Evaluation of a novel fluidized bed erosion rig. In: The 7th International Conference on Erosion by Liquid and Solid Impact, -- to -- Paper 71-..

Hutchings, IM and Levy, AV (1987) Thermal effects in the erosion of ductile metals. In: The Conference on Corrosion, Erosion and Wear of Materials at Elevated Temperatures, -- to -- p.121-..

Timothy, SP and Hutchings, IM (1984) The effect of anisotropy on adiabatic shear band trajectories in titanium alloys. In: The 8th ASME International Conference on High Energy Rate Fabrication, -- to -- p.31-..

Cousens, AK and Hutchings, IM (1983) Influence of erodent particle shape on the erosion of mild steel. In: The 6th International Conference on Erosion by Liquid and Solid Impact, -- to -- p.41.1-..

Timothy, SP and Hutchings, IM (1983) Scale effects in adiabatic shear banding caused by normal and oblique impact. In: The 6th International Conference on Erosion by Liquid and Solid Impact, -- to -- 43.1-..

Ninham, AJ and Hutchings, IM (1983) A computer model for particle velocity calculation in erosion testing. In: The 6th International Conference on Erosion by Liquid and Solid Impact, -- to -- p.50.1-..

Hutchings, IM and Cousens, AK (1982) Erosion of an aluminium alloy by spherical particles at normal impact. In: International Conference on Wear of Machines by Hard Particles, --1982 to --, Prague, Czech Republic.

Kukureka, SN and Hutchings, IM (1981) Measurement of the mechanical properties of polymers at high strain rates by Taylor impact. In: The 7th International Conference on High Energy Rate Fabrication, -- to -- pp. 29-38..

Towson, PG and Hutchings, IM (1980) The particle size effect in the erosion of copper by solid particle impact. In: Conference on Lubrication, Friction and Wear, --1980 to --, Melbourne, Australia.

Hutchings, IM (1979) Some comments on the theoretical treatment of erosive particle impacts. In: 5th International Conference on Erosion by Liquid and Solid Impact, -9-1979 to --, Newnham College, Cambridge.

Hutchings, IM (1979) Mechanical and metallurgical aspects of the erosion of metals. In: Conference on Corrosion-Erosion of Coal Conversion System Materials, --1979 to --.

Hutchings, IM and Andrews, DA (1978) Light-emitting diodes as short duration light sources. In: 13th International Congress on High-speed Photography and Photonics, --1978 to --, Tokyo, Japan.

Field, JE and Hutchings, IM and Gorham, DA (1977) Instrumentation for impact, erosion and fracture studies. In: The IEEE International Congress on Instrumentation in Aerospace Simulation Facilities (ICIASF '77), -- to -- pp. 142-149..

Hutchings, IM (1976) The erosion of metals by solid particles - a study using high-speed photography. In: 12th International Congress on High-Speed Photography (Photonics), 1-8-1976 to 7-8-1976, Toronto, Canada.

Other

Gee, MG and Gant, A and Hutchings, IM and Bethke, R and Schiffmann, K and Van Acker, K and Poulat, S and Gachon, Y and von Stebut, J (2002) Ball Cratering or Micro-Abrasion Wear Testing of Coatings: Good Practice Guide 057. National Physical Laboratory.

Gee, MG and Hutchings, IM (2002) General Approaches and Procedures for Erosive Wear Testing: Good Practice Guide 056. National Physical Laboratory.

Gee, MG and Gant, A and Hutchings, IM (2002) Rotating Wheel Abrasive Wear Testing: Good Practice Guide 055. National Physical Laboratory, UK.

Hutchings, IM (1986) Monograph on the erosion of materials by liquid flow. Materials Technology Institute of the Chemical Process Industries.

Hutchings, IM (1983) Monograph on the erosion of materials by solid particle impact. Materials Technology Institute of the Chemical Process Industries.

Thesis

Hutchings, IM (1974) The erosion of ductile metals by solid particles. PhD thesis, UNSPECIFIED.