Department of Engineering

Publications by Dr L. Xu

Number of items: 41.

Article

Zamboni, G and Xu, L (2012) Fan Root Aerodynamics For Large Bypass Gas Turbine Engines: Influence on the Engine Performance and 3D Design. ASME Journal of Turbomachinery, 134. -.

Giacche, D and Xu, LP and Coupland, J and Wilson, AG (2011) Comparison Between Postprocessing Methods Applied to Rotor-Stator-Interaction Tone-Noise Problems. AIAA J, 49. pp. 1214-1229. ISSN 0001-1452

Crichton, D and Xu, L and Hall, CA (2007) Preliminary fan design for a silent aircraft. Transactions of the ASME Journal of Turbomachinery, 129. pp. 184-191. ISSN 0889-504X

Curtis, P and Xu, L and Ford, P (2006) The design, development and testing of a turbine powered simulator for hot gas ingestion testing. SAE Transactions(Journal of Aerospace), 114. pp. 730-739. ISSN 0096-736X

Xu, L and Denton, JD (2004) Aero-acoustics of modern transonic fans. Journal of Thermal Science, 12. pp. 104-113. ISSN 1003-2169

Xu, L (2003) Assessing viscous body forces for unsteady calculations. ASME Transactions, Journal of Turbomachinery, 125. pp. 425-432. ISSN 0889-504X

Ning, F and Xu, L (2003) A Newton's method solver for unsteady viscous flows. Acta Mechanica Sinica, 19. ISSN 0567-7718

Xu, L and Hynes, TP and Denton, JD (2003) Towards long length scale unsteady modelling in turbomachines. Proceedings of the Institution of Mechanical Engineers Part A, Journal of Power and Energy, 217. pp. 75-82. ISSN 0957-6509

Xu, L and Hynes, TP and Denton, JD (2003) Towards long length scale unsteady modelling in turbomachines. P I MECH ENG A-J POW, 217. pp. 75-82. ISSN 0957-6509

Lu, H and Xu, L (2002) The influence of compressor blade leading edge wedge angle on the leading edge separation bubble. Chinese Journal of Engineering Thermophysics, 23. ISSN 0253-231X

Ning, F and Xu, L (2001) Application of GMRES method to two-dimensional steady turbulence flows. Acta Mechanica Sinica, 33. ISSN 0567-7718

Ning, F and Xu, L (2001) Application of one equation Spalart-Allmaras turbulence model in the numerical simulations of internal flows. Chinese Journal of Engineering Thermophysics, 22. ISSN 0253-231X

Xu, XZ and Xu, L and Cai, H (2001) Numerical investigation into cascade flow under partial admission. Chinese Journal of Engineering Thermophysics, 22. ISSN 0253-231X

Xu, XZ and Xu, L and Cai, H (2001) Some important problems about impeller design and the influence into internal flow and performance. Chinese Journal of Engineering Thermophysics, 22. ISSN 0253-231X

Ning, F and Xu, L (2000) Application of GMREC algorithm to 2D inviscid flows. Chinese Journal of Computational Physics, 17. pp. 537-547. ISSN 1001-246X

Zou, Z and Xu, L and Zhang, Z (2000) Establishment of repeating boundary condition in multi-stage compressor and its applications in compressor flow field diagnosis. Chinese Journal of Aerospace Power, 15. pp. 22-26. ISSN 1000-8055

Lu, H and Xu, L and Zhang, Z (2000) Improved compressor leading edge design. Chinese Journal of Aerospace Power, 15. ISSN 1000-8055

Zou, Z and Xu, L (2000) Prediction of 3-D unsteady flow using implicit dual time step approach. Acta Aeronautica et Astronautica, 21. pp. 317-321. ISSN 1000-6893

Denton, JD and Xu, L (1999) Turbomachinery blade design systems. VKI Lecture Series 1999-02.

Denton, JD and Xu, L (1999) The exploitation of 3D flow in turbomachinery design. Proceedings of the Institution of Mechanical Engineering, Part C: Journal of Mechanical Engineering Science, 213. pp. 125-137. ISSN 0954-4062

Denton, JD and Xu, L (1999) The exploitation of three-dimensional flow in turbomachinery design. P I MECH ENG C-J MEC, 213. pp. 125-137. ISSN 0954-4062

XU, L and DENTON, JD (1988) THE BASE-PRESSURE AND LOSS OF A FAMILY OF 4 TURBINE-BLADES. J TURBOMACH, 110. pp. 9-17. ISSN 0889-504X

Rosic, B and Xu, L Blade Lean and Shroud Leakage Flows in Low Aspect Ratio Turbines. ASME J. Turbomachinery, 134. (Unpublished)

Giacche, D and Xu, L and Coupland, J and Wilson, A Comparison between Postprocessing Methods Applied to Rotor-Stator-Interaction Tone-Noise Problems. AIAA Journal, 49. (Unpublished)

Conference or Workshop Item

Hazby, R and Xu, L (2007) Effects of leading edge sweep on the performance of a centrifugal impeller. In: 18th ISABE(International Symposium on AirBreathing Engines) Conference, 2-9-2007 to 7-9-2007, Beijing, China.

Crichton, D and Xu, LP and Hall, CA (2006) Preliminary fan design for a silent aircraft. In: UNSPECIFIED pp. 1663-1672..

Xu, L (2004) Shockwave and noise abatement of transonic fans. In: ASME Turbo Expo 2004 Power for Land, Sea, and Air, -5-2004 to --, Vienna, Austria pp. 1715-1722..

Denton, JD and Xu, L (2002) The effects of lean and sweep on transonic fan performance. In: ASME Turbo Expo Power for Land Sea and Air, 3-6-2002 to 6-6-2002, Amsterdam, Netherlands pp. 23-32..

Xu, L and Hynes, TP and Denton, JD (2001) Towards long length scale unsteady modelling in turbomachines. In: The 15th International Symposium on Airbreathing Engines (XV ISABE), 3-9-2001 to 7-9-2001, Bangalore, India pp. 57-58..

Ning, F and Xu, L (2001) Numerical investigation of transonic compressor rotor flow using an implicit 3D flow solver with one-equation Spalart-Allmaras turbulence model. In: ASME Turbo Expo, Power for Land, Sea and Air, 4-6-2001 to 7-6-2001, New Orleans, Louisiana, USA.

Bewick, CL and Adams, MJ and Schwaller, PJG and Xu, L (2001) Noise and aerodynamic design and the test of a low tip speed fan. In: 7th AIAA/CEAS Aeroacoustics Conference, 28-5-2001 to 30-5-2001, Maastricht, Netherlands.

Marshall, J and Xu, L and Denton, JD and Chew, J (2000) Prediction of low engine order inlet distortion driven resonance in a low aspect ratio fan. In: ASME Turbo Expo - Power for Land, Sea and Air, 8-5-2000 to 11-5-2000, Munich, Germany.

Lintz, A and Karakasis, M and Xu, L Assessment of different Optimisation Targets for the Design of Non-axisymmetric Profiled End-walls for Axial Turbines. In: the 10th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows, 4-7-2011 to 7-7-2011, Brussels, Belgium. (Unpublished)

Hazby, H and Xu, L Effects of the Blade Tip Loading on the Operating Range of a Transonic Impeller. In: XIX ISABE, 2009, -- to --, Montreal, Canada. (Unpublished)

Zamboni, G and Xu, L Fan Root Aerodynamics For Large Bypass Gas Turbine Engines: Influence on the Engine Performance and 3D Design. In: IGTI Gas Turbine Expo 2009, 8-6-2009 to 12-6-2009, Orlando, Florida, USA. (Unpublished)

Giacche, D and Xu, L and Coupland, J Multi-Disciplinary Multi-Objective Optimisation of Bypass OGV for Low Interaction Noise. In: 32nd AIAA Aeroacoustics Conference, 5-6-2011 to 8-6-2011, Portland, Oregon, USA. (Unpublished)

Hazby, H and Xu, L Numerical investigation of the effects of leading edge in a small transonic impeller. In: European Turbomachinery Conference, 23-7-2009 to 27-9-2009, Glaz, Austria. (Unpublished)

Hazby, H and Xu, L Role of Tip Leakage in Stall of a Transonic Centrifugal Impeller. In: IGTI Gas Turbine Expo 2009, 8-6-2009 to 12-6-2009, Orlando, Florida, USA pp. 1245-1253.. (Unpublished)

Hazby, H and Xu, L and Shleer, M Study of the Flow in a Vaneless Diffuser at Part Speed Operating Conditions. In: IGTI Gas Turbine Expo 2010, 14-6-2010 to 18-6-2010, Glasgow, UK. (Unpublished)

Patent

UNSPECIFIED COMPRESSOR BLADE. .

UNSPECIFIED Part casing circumference flow control arrangement. doi:.

This list was generated on Wed Jan 16 11:46:16 2013 GMT.