Article

Oztoprak, S and Bolton, MD (2013) Stiffness of sands through a laboratory test database. Geotechnique, 63. pp. 54-70. ISSN 0016-8505

Vardanega, PJ and Williamson, MG and Bolton, MD (2012) Bored pile design in stiff clay II: mechanisms and uncertainty. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-GEOTECHNICAL ENGINEERING, 165. pp. 233-246. ISSN 1353-2618

Li, Z and Haigh, SK and Bolton, MD (2012) Effect of previous cyclic axial loads on pile groups. International Journal of Physical Modelling in Geotechnics, 12. pp. 15-23. ISSN 1346-213X

Vardanega, PJ and Bolton, MD (2012) Erratum to Strength mobilization in clays and silts (Can. Geotech. J., (2011), 48, 10(1485-1503)). Canadian Geotechnical Journal, 49. p. 631. ISSN 0008-3674

Vardanega, PJ and Lau, BH and Lam, SY and Haigh, SK and Madabhushi, SPG and Bolton, MD (2012) Laboratory measurement of strength mobilisation in kaolin: Link to stress history. Geotechnique Letters, 2. pp. 9-15. ISSN 2045-2543

Lam, SY and Haigh, SK and Bolton, MD (2012) Understanding ground deformation mechanisms during multi-propped excavation in soft clay. Geotechnical Aspects of Underground Construction in Soft Ground - Proceedings of the 7th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground. pp. 377-385.

Lam, SY and Elshafie, MZEB and Haigh, SK and Bolton, MD (2012) A new apparatus for modelling excavations. International Journal of Physical Modelling in Geotechnics, 12. pp. 24-38. ISSN 1346-213X

Take, WA and Bolton, MD (2011) Seasonal ratcheting and softening in clay slopes, leading to first-time failure. GEOTECHNIQUE, 61. -. ISSN 0016-8505

Lau, CK and Bolton, MD (2011) The bearing capacity of footings on granular soils. I: Numerical analysis. GEOTECHNIQUE, 61. pp. 627-638. ISSN 0016-8505

Lau, CK and Bolton, MD (2011) The bearing capacity of footings on granular soils. II: Experimental evidence. GEOTECHNIQUE, 61. pp. 639-650. ISSN 0016-8505

Lam, SY and Bolton, MD (2011) Energy Conservation as a Principle Underlying Mobilizable Strength Design for Deep Excavations. J GEOTECH GEOENVIRON, 137. pp. 1062-1074. ISSN 1090-0241

Kuo, MY-H and Bolton, MD (2011) Faecal pellets in deep marine soft clay crusts: Implications for hot-oil pipeline design. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, 7. pp. 883-892.

Kuo, MY-H and Bolton, MD and Hill, AJ and Rattley, MJ (2011) New evidence for the origin and behaviour of deep ocean 'crusts'. Frontiers in Offshore Geotechnics II - Proceedings of the 2nd International Symposium on Frontiers in Offshore Geotechnics. pp. 365-370.

Vardanega, PJ and Bolton, MD (2011) Strength mobilization in clays and silts. Canadian Geotechnical Journal, 48. pp. 1485-1503. ISSN 0008-3674

Marketos, G and Bolton, MD (2010) Flat boundaries and their effect on sand testing. INT J NUMER ANAL MET, 34. pp. 821-837. ISSN 0363-9061

Kwok, CY and Bolton, MD (2010) DEM simulations of thermally activated creep in soils. GEOTECHNIQUE, 60. pp. 425-433. ISSN 0016-8505

Lam, SY and Ma, X and Bolton, MD (2010) Analysis of case histories on deep excavations in marine clay. Geotechnical Special Publication. pp. 37-42. ISSN 0895-0563

Ma, XF and Zhang, HH and Yu, L and Lam, SY and Bolton, MD (2010) Case study on a deep excavation in soft ground by centrifuge model tests. Physical Modelling in Geotechnics - Proceedings of the 7th International Conference on Physical Modelling in Geotechnics 2010, ICPMG 2010, 1. pp. 487-492.

Li, Z and Haigh, SK and Bolton, MD (2010) The behavior of a single pile under cyclic axial loads. Geotechnical Special Publication. pp. 143-148. ISSN 0895-0563

Li, Z and Haigh, SK and Bolton, MD (2010) The response of pile groups under cyclic lateral loads. International Journal of Physical Modelling in Geotechnics, 10. pp. 47-57. ISSN 1346-213X

Marketos, G and Bolton, MD (2009) Compaction bands simulated in Discrete Element Models. J STRUCT GEOL, 31. pp. 479-490. ISSN 0191-8141

Kuo, M-H and Bolton, MD (2009) Soil characterization of deep sea West African clays: Is biology a source of mechanical strength? Proceedings of the International Offshore and Polar Engineering Conference. pp. 488-494. ISSN 1098-6189

Bolton, MD and Lam, SY and Osman, AS (2009) Supporting excavations in clay - From analysis to decision-making. Geotechnical Aspects of Underground Construction in Soft Ground - Proceedings of the 6th International Symposium, IS-SHANGHAI 2008. pp. 15-28.

Bolton, MD and Nakata, Y and Cheng, YP (2008) Micro- and macro-mechanical behaviour of DEM crushable materials. GEOTECHNIQUE, 58. pp. 471-480. ISSN 0016-8505

Cheuk, CY and White, DJ and Bolton, MD (2008) Reply to the discussion by McCarron on "Large-scale modelling of soil-pipe interaction during large amplitude cyclic movements of partially embedded pipelines". CAN GEOTECH J, 45. pp. 744-749. ISSN 0008-3674

Cheuk, CY and White, DJ and Bolton, MD (2008) Uplift mechanisms of pipes buried in sand. J GEOTECH GEOENVIRON, 134. pp. 154-163. ISSN 1090-0241

White, DJ and Cheuk, CY and Bolton, MD (2008) The uplift resistance of pipes and plate anchors buried in sand. GEOTECHNIQUE, 58. pp. 771-779. ISSN 0016-8505

Lee, YS and Cheuk, CY and Bolton, MD (2008) Instability caused by a seepage impediment in layered fill slopes. CAN GEOTECH J, 45. pp. 1410-1425. ISSN 0008-3674

Cheuk, CY and White, DJ and Bolton, MD (2007) Large-scale modelling of soil-pipe interaction during large amplitude cyclic movements of partially embedded pipelines. CAN GEOTECH J, 44. pp. 977-996. ISSN 0008-3674

Cheuk, CY and Take, WA and Bolton, MD and Oliveira, JRMS (2007) Soil restraint on buckling oil and gas pipelines buried in lumpy clay fill. ENG STRUCT, 29. pp. 973-982. ISSN 0141-0296

Marketos, G and Bolton, MD (2007) Quantifying the extent of crushing in granular materials: A probability-based predictive method. J MECH PHYS SOLIDS, 55. pp. 2142-2156. ISSN 0022-5096

Sentenac, P and Lynch, RJ and Bolton, MD and Taylor, RN (2007) Alcohol’s effect on the hydraulic conductivity of consolidated clay. Environmental Geology, 52. pp. 1595-1600. ISSN 0943-0105

Thusyanthan, NI and Take, WA and Madabhushi, SPG and Bolton, MD (2007) Crack initiation in clay observed in beam bending. Géotechnique, 57. pp. 581-594. ISSN 0016-8505

Osman, AS and White, DJ and Britto, A and Bolton, MD (2007) Simple prediction of the undrained displacement of a circular surface foundation on non-linear soil. Géotechnique, 57. pp. 729-737. ISSN 0016-8505

de Groot, MB and Bolton, MD and Foray, P and Meijers, P and Palmer, AC and Sandven, R and Sawicki, A and Teh, TC (2006) Physics of liquefaction phenomena around marine structures. J WATERW PORT C-ASCE, 132. pp. 227-243. ISSN 0733-950X

Teh, TC and Palmer, AC and Bolton, MD and Dampard, JS (2006) Stability of submarine pipelines on liquefied seabeds. J WATERW PORT C-ASCE, 132. pp. 244-251. ISSN 0733-950X

Osman, AS and Bolton, MD (2006) Ground movement predictions for braced excavations in undrained clay. J GEOTECH GEOENVIRON, 132. pp. 465-477. ISSN 1090-0241

Osman, AS and Mair, RJ and Bolton, MD (2006) On the kinematics of 2D tunnel collapse in undrained clay. GEOTECHNIQUE, 56. pp. 585-595. ISSN 0016-8505

Osman, AS and Bolton, MD and Mair, RJ (2006) Predicting 2D ground movements around tunnels in undrained clay. GEOTECHNIQUE, 56. pp. 597-604. ISSN 0016-8505

Lee, YS and Bolton, MD (2006) Centrifugal modelling of the landslides triggering mechanism in layered fill slopes. Physical Modelling in Geotechnics, 6th ICPMG'06 - Proceedings of the 6th International Conference on Physical Modelling in Geotechnics, 1-2. pp. 355-360.

Osman, AS and Bolton, MD (2006) Design of braced excavations to limit ground movements. Proceedings of the Institute of Civil Engineering: Geotechnical Engineering, 159. pp. 167-175. ISSN 1353-2618

Knappett, JA and Mitrani, H and Madabhushi, SPG and Bolton, MD (2006) Discussion: Seismic behaviour of micropile systems. Ground Improvement, 10. pp. 173-175. ISSN 1365-781X

Yetginer, AG and White, DJ and Bolton, MD (2006) Field measurements of the stiffness of jacked piles and pile groups. Géotechnique, 56. pp. 349-354. ISSN 0016-8505

Osman, AS and Bolton, MD (2006) Ground movement predictions for braced excavations in undrained clay. ASCE Journal of Geotechnical and Geoenvironmental Engineering, 132. pp. 465-477. ISSN 1090-0241

Zhao, Y and White, DJ and Bolton, MD (2006) In situ seismic monitoring during centrifuge tests of jacked piles. Physical Modelling in Geotechnics, 6th ICPMG'06 - Proceedings of the 6th International Conference on Physical Modelling in Geotechnics, 1-2. pp. 907-912.

Zhao, Y and White, DJ and Bolton, MD (2006) In situ seismic monitoring during centrifuge tests of jacked piles. Physical Modelling in Geotechnics, 6th ICPMG'06 - Proceedings of the 6th International Conference on Physical Modelling in Geotechnics, 1-2. pp. 907-912.

de Groot, MB and Bolton, MD and Foray, P and Meijers, P and Palmer, AC and Sandven, R and Sawicki, A and Teh, TC (2006) Physics of liquefaction phenomena around marine structures. ASCE Journal of Waterway, Port, Coastal and Ocean Engineering, 132. pp. 227-243. ISSN 0733-950X

Teh, TC and Palmer, AC and Bolton, MD and Damgaard, JS (2006) Stability of submarine pipelines on liquefied seabeds. ASCE Journal of Waterway, Port, Coastal and Ocean Engineering, 132. pp. 244-251. ISSN 0733-950X

Silva, MF and White, DJ and Bolton, MD (2006) An analytical study of the effect of penetration rate on piezocone tests in clay. International Journal for Numerical and Analytical Methods in Geomechanics, 30. pp. 501-527. ISSN 0363-9061

Sentenac, P and Lynch, RJ and Bolton, MD and Taylor, RN (2006) The influence of water-miscible solvents on the permeability of clay. 5th ICEG Environmental Geotechnics: Opportunities, Challenges and Responsibilities for Environmental Geotechnics - Proceedings of the ISSMGE 5th Int. Congress, I. pp. 636-643.

Chua, HY and Bolton, MD (2006) The use of centrifuge tests in the study of arching. Physical Modelling in Geotechnics, 6th ICPMG'06 - Proceedings of the 6th International Conference on Physical Modelling in Geotechnics, 1-2. pp. 1075-1080.

Osman, AS and Bolton, MD (2005) Simple plasticity-based prediction of the undrained settlement of shallow circular foundations on clay. GEOTECHNIQUE, 55. pp. 435-447. ISSN 0016-8505

White, DJ and Take, WA and Bolton, MD (2005) Discussion of "Accuracy of digital image correlation for measuring deformations in transparent media" by Samer Sadek, Magued G. Iskander, and Jinyuan Liu. J COMPUT CIVIL ENG, 19. pp. 217-219. ISSN 0887-3801

White, DJ and Bolton, MD (2005) Comparing CPT and pile base resistance in sand. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 158. pp. 3-14. ISSN 1353-2618

Gourvenec, SM and Mair, RJ and Bolton, MD and Soga, K (2005) Ground conditions around an old tunnel in London Clay. Proceedings of the Institute of Civil Engineers: Geotechnical Engineering, 158. pp. 25-33. ISSN 1353-2618

White, DJ and Take, WA and Bolton, MD (2005) Discussion of "Accuracy of digital image correlation for measuring deformations in transparent media" by Samer Sadek, Magued G. Iskander, and Jinyuan Liu. ASCE Journal of Computing in Civil Engineering, 19. pp. 217-219. ISSN 0887-3801

Osman, AS and Bolton, MD (2005) Simple plasticity-based prediction of the undrained settlement of shallow circular foundations on clay. Géotechnique, 56. pp. 355-356. ISSN 0016-8505

Ou, CD and Ng, CWW and Bolton, MD and Takemura, J and Vailicek, I and Wheeler, S and Komiya, K (2005) Technical session 2c: Excavation, retaining structures and foundations. Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering: Geotechnology in Harmony with the Global Environment, 5. pp. 3177-3180.

Bhattacharya, S and Bolton, MD and Madabhushi, SPG (2005) A reconsideration of the safety of piled bridge foundations in liquefiable soils. Soils and Foundations, 45. pp. 13-25. ISSN 0038-0806

Au, SKA and Soga, K and Jafari, MR and Bolton, MD and Komiya, K (2004) Closure to "Factors affecting long-term efficiency of compensation grouting in clays" by S.K.A. Au, K. Soga, M. R. Jafari, M. D. Bolton, and K. Komiya. J GEOTECH GEOENVIRON, 130. pp. 885-886. ISSN 1090-0241

Cheng, YP and Bolton, MD and Nakata, Y (2004) Crushing and plastic deformation of soils simulated using DEM. Géotechnique, 54. pp. 131-141. ISSN 0016-8505

White, DJ and Bolton, MD (2004) Displacement and strain paths during plane-strain model pile installation in sand. Géotechnique, 54. pp. 375-466. ISSN 0016-8505

Take, WA and Bolton, MD and Wong, PCP and Yeung, FJ (2004) Evaluation of landslide triggering mechanisms in model fill slopes. Landslides, 1. pp. 173-184. ISSN 1612-510X

Soga, K and Au, SKA and Jafari, MR and Bolton, MD (2004) Laboratory investigation of multiple grout injections into clay. Géotechnique, 54. pp. 81-90. ISSN 0016-8505

Bhattacharya, S and Madabhushi, SPG (2004) An alternative mechanism of pile failure in liquefiable deposits during earthquakes. Géotechnique, 54. pp. 203-213. ISSN 0016-8505

Osman, AS and Bolton, MD (2004) A new design method for retaining walls in clay. Canadian Geotechnical Journal, 41. pp. 451-466. ISSN 1208-6010

Davy, CA and Bolton, MD and Fleck, NA (2004) The shearing behaviour of a sugar aggregate. Acta Materialia, 52. pp. 3587-3601. ISSN 1359-6454

Au, SKA and Soga, K and Jafari, MR and Bolton, MD and Komiya, K (2003) Factors affecting long-term efficiency of compensation grouting in clays. J GEOTECH GEOENVIRON, 129. pp. 254-262. ISSN 1090-0241

Cheng, YP and Nakata, Y and Bolton, MD (2003) Discrete element simulation of crushable soil. Géotechnique, 53. pp. 633-642. ISSN 0016-8505

White, DJ and Take, WA and Bolton, MD (2003) Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry. Géotechnique, 53. pp. 619-632. ISSN 0016-8505

Take, WA and Bolton, MD (2003) Tensiometer saturation and the reliable measurement of soil suction. Géotechnique, 53. pp. 159-172. ISSN 0016-8505

Palmer, AC and White, DJ and Baumgard, AJ and Bolton, MD and Barefoot, AJ and Finch, M and Powell, T and Faranski, AS and Baldry, JAS (2003) Uplift resistance of buried submarine pipelines: comparison between centrifuge modelling and full-scale tests. Géotechnique, 53. pp. 877-883. ISSN 0016-8505

Gui, MW and Soga, K and Bolton, MD and Hamelin, JP (2002) Instrumented borehole drilling for subsurface investigation. J GEOTECH GEOENVIRON, 128. pp. 283-291. ISSN 1090-0241

Lee, CJ and Bolton, MD and Al Tabbaa, A (2002) Numerical modelling of group effects on the distribution of dragloads in pile foundations. Géotechnique, 52. pp. 325-335. ISSN 0016-8505

Lee, SW and Bolton, MD and Mair, RJ and Soga, K and Hagiwara, T (2002) Modelling of sequential injections near tunnel linings. SOILS FOUND, 42. pp. 9-22. ISSN 0038-0806

El Hamalawi, A and Bolton, MD (2002) A-posteriori error estimation in axisymmetric geotechnical analyses. Computers and Geotechnics, 29. pp. 587-607. ISSN 0266-352X

Pena, A and Harris, NG and Bolton, MD and Czosnyka, M and Pickard, JD (2002) Communicating hydrocephalus: the biomechanics of progressive ventricular enlargement revisited. Acta Neurochirurgica Supplementum, 81. pp. 59-63. ISSN 0065-1419

Pena, A and Harris, NG and Bolton, MD and Czosnyka, M and Pickard, JD (2002) Communicating hydrocephalus: the biomechanics of progressive ventricular enlargement revisited. Acta Neurochirurgica Supplementum, 81. pp. 59-63. ISSN 0065-1419

Cheng, YP and Bolton, MD and Nakata, Y (2002) The modelling of soil plasticity. Geotechnical Special Publication. pp. 283-287. ISSN 0895-0563

Komiya, K and Soga, K and Akagi, H and Jafari, MR and Bolton, MD (2001) Soil consolidation associated with grouting during shield tunnelling in soft clayey ground. Géotechnique, 51. pp. 835-846. ISSN 0016-8505

Sharma, JS and Bolton, MD and Boyle, RE (2001) A new technique for simulation of tunnel excavation in a centrifuge. GEOTECH TEST J, 24. pp. 343-349. ISSN 0149-6115

Sharma, JS and Bolton, MD (2001) Centrifugal and numerical modelling of reinforced embankments on soft clay installed with wick drains. Geotextiles and Geomembranes, 19. pp. 23-44. ISSN 0266-1144

Lee, SW and Bolton, MD and Mair, RJ and Hagiwara, T and Soga, K and Dasari, GR (2001) Centrifuge modelling of injections near tunnel linings. International Journal of Physical Modelling in Geotechnics, 1. pp. 9-24. ISSN 1346-213X

White, DJ and Barefoot, AJ and Bolton, MD (2001) Centrifuge modelling of upheaval buckling in sand. International Journal of Physical Modelling in Geotechnics, 1. pp. 19-28. ISSN 1346-213X

Jafari, MR and Au, SKA and Soga, K and Bolton, MD and Komiya, K (2001) Fundamental laboratory investigation of compensation grouting in clay. ASCE Geotechnical Special Publication, 113. pp. 445-459. ISSN 0895-0563

McDowell, GR and Bolton, MD (2001) Micro mechanics of elastic soil. Soils and Foundations, 41. pp. 147-152. ISSN 0385-1621

McDowell, GR and Bolton, MD (2000) Effect of particle size distribution on pile tip resistance in calcareous sand in the geotechnical centrifuge. Granular Matter, 2. pp. 179-188. ISSN 1434-5021

Peña, A and Bolton, MD and Whitehouse, H and Pickard, JD (1999) Effects of brain ventricular shape on periventricular biomechanics: a finite-element analysis. Neurosurgery, 45. pp. 107-116. ISSN 0148-396X

Treadaway, ACJ and Lynch, RJ and Bolton, MD (1999) Pollution transport studies using an in-situ fibre optic photometric sensor. ENG GEOL, 53. pp. 195-204. ISSN 0013-7952

Bolton, MD and Gui, MW and Garnier, J and Corte, JF and Bagge, G and Laue, J and Renzi, R (1999) Centrifuge cone penetration tests in sand. Géotechnique, 49. pp. 543-552. ISSN 0016-8505

McDowell, GR and Bolton, MD (1999) A non-linear elastic/perfectly plastic analysis for plane strain undrained expansion tests. Géotechnique, 49. pp. 133-141. ISSN 0016-8505

El Hamalawi, A and Bolton, MD (1999) An a posteriori error estimator for plane-strain geotechnical analyses. Finite Elements in Analysis and Design, 33. pp. 335-354. ISSN 0168-874X

McKinley, JD and Bolton, MD (1999) A geotechnical description of fresh cement grout - filtration and consolidation behaviour. Magazine of Concrete Research, 51. pp. 295-307. ISSN 0024-9831

Pena, A and Bolton, MD and Whitehouse, H and Pickard, JD (1999) Effects of brain ventricular shape on periventricular biomechanics: A finite element analysis. Neurosurgery, 45. pp. 107-118. ISSN 0148-396X

Komiya, K and Soga, K and Akagi, H and Hagiwara, T and Bolton, MD (1999) Finite element modelling of excavation and advancement processes of a shield tunnelling machine. Soils and Foundations, 39. pp. 37-52. ISSN 0385-1621

Sugiyama, T and Hagiwara, T and Nomoto, T and Nomoto, M and Ano, Y and Mair, RJ and Bolton, MD and Soga, K (1999) Observations of ground movements during tunnel construction by slurry shield method at the docklands light railway Lewisham extension - East London. Soils and Foundations, 39. pp. 99-112. ISSN 0385-1621

McKinley, JD and Bolton, MD (1999) A geotechnical description of fresh cement grout - filtration and consolidation behaviour. Magazine of Concrete Research, 51. pp. 295-307. ISSN 0024-9831

McDowell, GR and Bolton, MD (1999) A micro mechanical model for isotropic cyclic loading of isotropically clastically compressed soil. Granular Matter, 1. pp. 183-193. ISSN 1434-5021

Omine, K and Ochiai, H and Bolton, MD (1998) Generalised two-phase mixture model and its application to composite ground. Memoirs of the Faculty of Engineering of Kyushu University, 58. pp. 83-109. ISSN 0023-6160

McDowell, GR and Bolton, MD (1998) On the micro-mechanics of crushable aggregates. Géotechnique, 48. pp. 667-680. ISSN 0016-8505

Treadaway, ACJ and Lynch, RJ and Bolton, MD (1998) Pollution transport studies using an in-situ fibre optic photometric sensor. Engineering Geology, 52. pp. 195-204. ISSN 0013-7952

Robertson, D and Bolton, MD and McDowell, GR (1997) A numerical representation of fracturing granular materials. INT J NUMER ANAL MET, 21. pp. 825-843. ISSN 0363-9061

Bolton, MD and McKinley, J (1997) Geotechnical properties of fresh cement grout - pressure filtration and consolidation tests. Geotechnique, 47. pp. 347-352. ISSN 0016-8505

Robertson, D and Bolton, MD and Garnier, J and Corte, JF and Bagge, G and Laue, J and Rienzi, R (1997) A numerical representation of fracturing granular materials. International Journal for Numerical and Analytical Methods in Geomechanics, 21. pp. 825-844. ISSN 0363-9061

McDowell, GR and Bolton, MD and Robertson, D (1996) The fractal crushing of granular materials. J MECH PHYS SOLIDS, 44. 2079-&. ISSN 0022-5096

Sharma, JS and Bolton, MD (1996) Centrifuge modelling of an embankment on soft clay reinforced with a geogrid. Geotextiles and Geomembranes, 14. pp. 1-17. ISSN 0266-1144

Sharma, JS and Bolton, MD (1996) Finite element analysis of centrifuge tests on reinforced embankments on soft clay. Computers and Geotechnics, 19. pp. 1-22. ISSN 0266-352X

Bolton, MD (1996) Geotechnical design of retaining walls. Structural Engineer, 74. pp. 365-369. ISSN 0039-2553

El Hamalawi, A and Bolton, MD and Britto, A (1996) A cubic strain quadrilateral finite element. International Journal for Numerical and Analytical Methods in Geomechanics, 20. pp. 295-302. ISSN 0363-9061

McDowell, GR and Bolton, MD and Robertson, D (1996) The fractal crushing of granular materials. Journal of the Mechanics and Physics of Solids, 44. pp. 2079-2102. ISSN 0022-5096

Ng, CWW and Bolton, MD and Dasari, GR (1995) The small strain stiffness of a carbonate stiff clay. Soils and Foundations, 35. pp. 109-114. ISSN 0385-1621

Bolton, MD and Stewart, DI (1994) The effect on propped diaphragm walls of rising groundwater in stiff clay. Geotechnique, 44. pp. 111-127. ISSN 0016-8505

Bolton, MD and Sun, HW and Britto, AM (1993) Finite element analyses of bridge abutments on firm clay. Computers and Geotechnics, 15. pp. 221-245. ISSN 0266-352X

Osman, AS and Bolton, MD (1993) Vertical bearing capacity factors for circular and strip footings on Mohr–Coulomb soil. Canadian Geotechnical Journal, 30. pp. 1024-1033. ISSN 1208-6010

MCKINLEY, JD and BOLTON, MD (1992) A MATHEMATICAL-MODEL OF PERMEABILITY ALTERATION AROUND WELLS - DISCUSSION. INT J NUMER ANAL MET, 16. pp. 887-890. ISSN 0363-9061

McKinley, JD and Bolton, MD (1992) Discussion on: a mathematical model of permeability alteration around wells. International Journal for Numerical and Analytical Methods in Geomechanics, 16. pp. 887-890. ISSN 0363-9061

Bolton, MD and Fragaszy, RJ and Lee, DM (1991) Broadening the specification of granular fills. Transport Research Record. pp. 35-41. ISSN 0361-1981

Bolton, MD and Powrie, W and Symons, IF (1990) The design of in-situ walls retaining overconsolidated clay: part II. Ground Engineering, 23. pp. 22-28. ISSN 0017-4653

Bolton, MD and Wilson, JMR (1989) Experimental and theoretical comparison between static and dynamic torsional soil tests. Geotechnique, 39. pp. 585-599. ISSN 0016-8505

Bolton, MD and Britto, AM and Powrie, W and White, TP (1989) Finite element analysis of a centrifuge model of a retaining wall embedded in overconsolidated clay. Computers and Geotechnics, 7. pp. 289-318. ISSN 0266-352X

Bolton, MD and Powrie, W and Symons, IF (1989) The design of in-situ walls retaining overconsolidated clay: part I. Ground Engineering, 22. pp. 44-48. ISSN 0017-4653

Bolton, MD and Wilson, JMR (1989) An experimental and theoretical comparison between static and dynamic torsional soil tests. Geotechnique, 39. pp. 585-599. ISSN 0016-8505

Bolton, MD and Powrie, W (1988) Behaviour of diaphragm walls in clay prior to collapse. Geotechnique, 38. pp. 167-189. ISSN 0016-8505

Bolton, MD and Powrie, W (1987) The collapse of diaphragm walls retaining clay. Geotechnique, 37. pp. 335-353. ISSN 0016-8505

BOLTON, MD and SMITH, GN and ORR, TLL and RAMACHANDRAN, K (1986) THE USE OF PROBABILITY-THEORY TO ASSESS THE SAFETY OF PROPPED EMBEDDED CANTILEVER RETAINING WALLS. GEOTECHNIQUE, 36. pp. 615-620. ISSN 0016-8505

Bolton, MD (1986) The strength and dilatancy of sands. Geotechnique, 36. pp. 65-78. ISSN 0016-8505

BURLAND, JB and WAKELING, TRM and TEDD, P and BOLTON, MD and POWRIE, W and GARRETT, C and GABRIEL, KR and BARNES, SJ and JARDINE, RJ and WROTH, CP and DALTON, JCP and RAISON, CA and PAPPIN, JW and SIMPSON, B and WOOD, LA and PERRIN, AJ (1985) PERFORMANCE OF PROPPED AND CANTILEVERED RIGID WALLS - DISCUSSION. GEOTECHNIQUE, 35. pp. 533-548. ISSN 0016-8505

Bolton, MD and Mak, KW (1985) APPLICATION OF CENTRIFUGE MODELS IN THE STUDY OF AN INTERACTION PROBLEM. pp. 403-422.

Bolton, MD and Steedman, RS (1985) BEHAVIOUR OF FIXED CANTILEVER WALLS SUBJECT TO LATERAL SHAKING. pp. 301-313.

Bolton, MD (1985) DEVELOPMENT OF MULTI-ANCHOR EARTH RETENTION SYSTEMS. pp. 253-269.

BOLTON, MD (1985) PROBABILISTIC CHARACTERIZATION OF SHEAR-STRENGTH USING RESULTS OF DIRECT SHEAR TESTS. GEOTECHNIQUE, 35. pp. 231-233. ISSN 0016-8505

Bolton, MD (1983) Eurocodes and the geotechnical engineer. Ground Engineering, 16. p.17-. ISSN 0017-4653

Bolton, MD and Pang, PLR (1982) Collapse limit states of reinforced earth retaining walls. Geotechnique, 32. pp. 349-367. ISSN 0016-8505

BOLTON, MD (1982) A LABORATORY SIMULATION OF REINFORCED CLAY WALLS - DISCUSSION. GEOTECHNIQUE, 32. pp. 165-167. ISSN 0016-8505

Bolton, MD (1981) Limit state design in geotechnical engineering. Ground Engineering, 14. pp. 39-46. ISSN 0017-4653

BOLTON, MD (1981) REINFORCED EARTH STRUCTURES SITUATED ON SOFT FOUNDATIONS. GEOTECHNIQUE, 31. pp. 436-438. ISSN 0016-8505

Bolton, MD and English, R and Hird, CC and Schofield, AN (1973) Ground displacements in centrifugal models. Soil Mechanics and Foundation Engineering, 10. pp. 65-70. ISSN 0038-0741

Li, Z and Haigh, SK and Bolton, MD Cyclic axial behaviour of piles and pile groups in sand. Canadian Geotechnical Journal. (Unpublished)

Book

Bolton, MD (1979) A Guide to Soil Mechanics. Macmillan, London, UK, -. ISBN 0333189329

Book Section

Marketos, G and Bolton, MD (2005) Compaction bands as observed in DEM simulations. In: Powders and Grains 2005. A.A. Balkema, Rotterdam, Netherlands, pp. 1405-1408. ISBN 041538348X

Cheng, YP and Bolton, MD and Nakata, Y (2005) Grain crushing and critical states observed in DEM simulations. In: Powders and Grains 2005. A.A. Balkema, Rotterdam, Netherlands, pp. 1393-1397. ISBN 041538348X

Nakata, Y and Bolton, MD and Cheng, YP (2005) Relating particle characteristics to macro behavior of DEM crushable material. In: Powders and Grains 2005. A.A. Balkema, Rotterdam, Netherlands, pp. 1387-1391. ISBN 041538348X

Osman, AS and Bolton, MD (2004) A new approach to the estimation of undrained settlement of shallow foundations on soft clay. In: Engineering Practice and Performance of Soft Deposits, IS-OSAKA 2004. Japanese Geotechnical Society, pp. 93-98. ISBN 4886448127

Lynch, RJ and Bolton, MD (1996) Low-cost fiber optic pH sensor for the in-situ measurement of groundwater. In: Advanced Technologies for Environmental Monitoring and Remediations. Proceedings of SPIE . SPIE: The International Society for Optical Engineering, pp. 221-227. ISBN 0819422231

Bolton, MD (1993) Mechanisms of ground deformation due to excavation in clay. In: Excavation in Urban Areas: 2nd Kansai International Geotechnical Forum on Comparative Geotechnical Enginnering. Kobe University, Japan, pp. 1-33. ISBN 4886448046

Bolton, MD and Sun, HW (1991) The behaviour of bridge abutments on spread foundations. In: Deformation of Soils and Displacements of Structures. 10th European Conference on Soil Mechanics and Foundation Engineering, 1 . A.A. Balkema, pp. 319-322. ISBN 9054100028

Conference or Workshop Item

Elshafie, MZEB and Lam, SY and Haigh, SK and Bolton, MD (2010) Centrifuge modelling of deep excavations in soft clay. In: 7th Int. Conf. Physical Modelling in Geotechnics, -- to --, Zurich.

Li, Z and Haigh, SK and Bolton, MD (2010) Centrifuge modelling of monopile under cyclic lateral loads. In: 7th Int. Conf. Physical Modelling in Geotechnics, -- to --.

Lo, CY and Bolton, MD and Cheng, YP (2010) Velocity fields of granular flows down a rough incline: a DEM investigation. In: UNSPECIFIED pp. 477-482..

Gue, CS and Soga, K and Bolton, MD and Thusyanthan, NI (2010) Centrifuge modelling of submarine landslide flows. In: UNSPECIFIED pp. 1113-1118..

Thusyanthan, NI and Ganesan, SA and Bolton, MD and Allan, P (2008) Upheaval buckling resistance of pipelines buried in clayey backfill. In: UNSPECIFIED pp. 174-180..

Marketos, G and Bolton, MD (2007) A DEM study of compaction band formation. In: UNSPECIFIED pp. 155-171..

Marketos, G and Bolton, MD (2006) A statistical investigation of particle crushing in sand. In: The International Symposium on Geomechnics & Geotechnics of Particulate Media, IS- Yamaguchi 06, 12-9-2006 to 14-9-2006, Yamaguchi, Japan pp. 247-252..

Lee, YS and Bolton, MD (2006) Centrifugal modelling of landslide triggering mechanism in layered fill slopes. In: 6th International Conference on Physical Modelling in Geotechnics, 4-8-2006 to 6-8-2006, Hong Kong University of Science and Technology pp. 355-360..

Zhao, Y and White, DJ and Bolton, MD (2006) In situ seismic monitoring during centrifuge tests of jacked piles. In: The 6th International Conference on Physical Modelling in Geotechnics; ICPMG ’06, 4-8-2006 to 6-8-2006, Hong Kong, China pp. 907-912..

Zhao, Y and Bolton, MD (2006) In situ seismic monitoring in centrifuge piling tests. In: 6th International Conference on Physical Modelling in Geotechnics, 4-8-2006 to 6-8-2006, Hong Kong University of Science and Technology pp. 907-912..

Cheuk, CY and Bolton, MD (2006) A technique for modelling the lateral stability of on-bottom pipelines in a small drum centrifuge. In: 6th International Conference on Physical Modelling in Geotechnics, 4-8-2006 to 6-8-2006, Hong Kong University of Science and Technology pp. 715-721..

Chua, HY and Bolton, MD (2006) The use of centrifuge tests in the study of arching. In: 6th International Conference on Physical Modelling in Geotechnics, 4-8-2006 to 6-8-2006, Hong Kong University of Science and Technology pp. 1075-1080..

Bruton, DAS and White, DJ and Cheuk, CY and Bolton, MD and Carr, MC (2006) Pipe-soil interaction behaviour during lateral buckling, including large amplitude cyclic displacement tests by the Safebuck JIP. In: Offshore Technology Conference (OTC '06), 1-5-2006 to 4-5-2006, Houston, Texas, USA 17944-..

Oliphant, J and White, DJ and Bolton, MD and Maconochie, A and Bonab, M (2006) Model tests simulating catenary riser-soil interaction. In: Deep on Offshore Technology Conference, DOT'06, 28-11-2006 to 30-11-2006, Houston, Texas, USA.

White, DJ and Maconachie, AJ and Cheuk, CY and Bolton, MD and Joray, D and Springman, SM (2005) An investigation into the vertical bearing capacity of perforated mudmats. In: 1st International Symposium on Frontiers in Offshore Geotechnics, ISFOG 2005, 19-9-2005 to 21-9-2005, Perth, Australia pp. 459-468..

Cheuk, CY and White, DJ and Bolton, MD (2005) Deformation mechanisms during uplift of buried pipes in sand. In: The 16th International Conference on Soil Mechanics and Geotechnical Engineering (16ICSMGE), 12-9-2005 to 16-9-2005, Osaka, Japan pp. 1685-1688..

Chua, HY and Bolton, MD (2005) Modelling of horizontal arching on retaining walls. In: The 16th International Conference on Soil Mechanics and Geotechnical Engineering (16ICSMGE), 12-9-2005 to 16-9-2005, Osaka, Japan pp. 1455-1459..

Osman, AS and Bolton, MD (2005) Teaching geotechnical engineers to avoid excessive deformations. In: The 16th International Conference on Soil Mechanics and Geotechnical Engineering (16ICSMGE), 12-9-2005 to 16-9-2005, Osaka, Japan pp. 2837-2840..

Deeks, AD and White, DJ and Bolton, MD (2005) A comparison of jacked, driven and bored piles in sand. In: The 16th International Conference on Soil Mechanics and Geotechnical Engineering (16ICSMGE, Osaka, Japan), 12-9-2005 to 16-9-2005, Osaka, Japan pp. 1685-1688..

Silva, MF and Bolton, MD (2005) Interpretation of centrifuge piezocone tests in dilatant, low plasticity silts. In: International Conference on Problematic Soils (GEOPROB 2005), 25-5-2005 to 27-5-2005, Famagusta, Cyprus.

Silva, M and Bolton, MD (2004) Centrifuge pemetration tests in saturated layered sands. In: The Second International Conference on Site Characterization : ISC-2, -9-2004 to --, Porto, Portugal pp. 377-384..

Pitilakis, K and Kirtas, E and Sextos, A and Bolton, MD and Madabhushi, SPG and Brennan, AJ and Modaressi, A and Clouteau, D and Lopez Caballero, F (2004) Validation by centrifuge testing of numerical simulations for soil-foundation-structure systems. In: 13th World Conference on Earthquake Engineering, 1-8-2004 to 6-8-2004, Vancouver, Canada.

Osman, AS and Bolton, MD (2004) Avoiding excessive displacements: a new design approach for retaining walls. In: International Conference on Structural and Foundation Failures, 2-8-2004 to 4-8-2004, Singapore.

Osman, AS and Yeow, YC and Bolton, MD (2004) Estimation of undrained settlement of shallow foundations on London clay. In: International Conference on Structural and Foundation Failures, 2-8-2004 to 4-8-2004, Singapore.

Doyle, EH and Dean, ETR and Sharma, JS and Bolton, MD and Valsangkar, AJ and Newlin, JS (2004) Centrifuge model tests on anchor piles for tension leg platforms. In: The Annual Optical Fiber Communications Conference, OFC'04, 24-5-2004 to --, Los Angeles, California 16845-..

Teh, TC and Palmer, AC and Bolton, MD (2004) Wave-induced seabed liquefaction and the stability of marine pipelines. In: International Conference on Cyclic Behaviour of Soils and Liquefaction Phenomena, 31-3-2004 to 2-4-2004, Bochum, Germany pp. 449-453..

Bhattacharya, S and Bolton, MD (2004) Errors in design leading to pile failures during seismic liquefaction. In: The 5th International Conference on Case Histories in Geotechnical Engineering, -4-2004 to --, New York, USA p.327-..

Take, W and Bolton, MD (2004) Identification of seasonal slope behaviour mechanisms from centrifuge case studies. In: Conference on Advances in Geotechnical Engineering, 29-3-2004 to 31-3-2004, London, UK pp. 992-1004..

Palmer, AC and Teh, TC and Bolton, MD and Damgaard, J (2004) Stable pipelines on unstable seabed: progress towards a rational design method. In: 27th Offshore Pipeline Technology Conference, 25-2-2004 to 26-2-2004, Amsterdam, The Netherlands.

Rockhill, DJ and White, DJ and Bolton, MD (2003) Ground vibrations due to piling operations. In: BGA International Conference on Foundations; Innovations, Observations, Design and Practice, 2-9-2003 to 5-9-2003, Dundee, Scotland, UK pp. 743-756..

Yetginer, AG and White, DJ and Bolton, MD (2003) Press-in piling: field testing of cell foundations. In: BGA International Conference on Foundations; Innovations, Observations, Design and Practice, 2-9-2003 to 5-9-2003, Dundee, Scotland, UK pp. 963-974..

White, DJ and Bolton, MD and Wako, C (2003) A novel urban foundation system using pressed-in H-piles. In: 13th European Conference on Soil Mechanics and Geotechnical Engineering, 25-8-2003 to 28-8-2003, Prague, Czech Republic pp. 425-430..

Soga, K and Au, SKA and Bolton, MD (2003) Effect of injection rate on clay-grout behavior for compensation grouting. In: 3rd International Conference on Grouting and Ground Treatment, 10-2-2003 to 12-2-2003, New Orleans, LA, USA pp. 845-856..

Bolton, MD and Take, WA and Wong, PCP and Yeung, FJ (2003) Mechanisms of failure in fill slopes after intense rainfall. In: International Conference on Slope Engineering, 8-12-2003 to 10-12-2003, Hong Kong pp. 1-25..

Rockhill, DJ and Bolton, MD and White, DJ (2003) Ground-borne vibrations due to press-in piling operations. In: UNSPECIFIED pp. 743-755..

White, DJ and Bolton, MD (2002) Soil deformation around a displacement pile in sand. In: International Conference on Physical Modelling in Geotechnics, ICPGM ’02, 10-7-2002 to 12-7-2002, St John's, Newfoundland, Canada pp. 649-654..

Take, WA and Bolton, MD (2002) An atmospheric chamber for the investigation of the effect of seasonal moisture changes on clay slopes. In: International Conference on Physical Modelling in Geotechnics, ICPGM ’02, 10-7-2002 to 12-7-2002, St John's, Newfoundland, Canada pp. 765-770..

Take, WA and Bolton, MD (2002) A new device for the measurement of negative pore water pressures in centrifuge models. In: International Conference on Physical Modelling in Geotechnics, ICPGM ’02, 10-7-2002 to 12-7-2002, St John's, Newfoundland, Canada pp. 89-94..

Au, SKA and Soga, K and Bolton, MD (2002) Effect of multiple injection on long-term compensation grouting - laboratory and numerical studies. In: 4th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, -4-2002 to --, Toulouse, France.

White, DJ and Finlay, TCR and Bolton, MD and Bearss, G (2002) Press-in piling: ground vibration and noise during pile installation. In: International Deep Foundations Congress 2002, Deep Foundations 2002, 14-2-2002 to 16-2-2002, Orlando, FL, USA pp. 363-371..

Lee, SW and Bolton, MD and Dasari, GR and Mair, RJ and Soga, K and Hagiwara, T (2001) Centrifuge and numerical simulation of compensation grouting near tunnel linings. In: The 15th International Conference on Soil Mechanics and Geotechnical Engineering (XVth ICSMGE), 27-8-2001 to 31-8-2001, Istanbul, Turkey pp. 1399-1402..

White, DJ and Take, WA and Bolton, MD and Munachen, SE (2001) A deformation measuring system for geotechnical testing based on digital imaging, close-range photogrammetry, and PIV image analysis. In: The 15th International Conference on Soil Mechanics and Geotechnical Engineering (XVth ICSMGE), 27-8-2001 to 31-8-2001, Istanbul, Turkey pp. 539-542..

Bolton, MD and Cheng, YP (2001) Micro-geomechanics. In: International Workshop on Constitutive and Centrifuge Modelling: Two Extremes, 8-7-2001 to 13-7-2001, Monte Verita, Switzerland pp. 59-74..

White, DJ and Bolton, MD (2001) Observing friction fatigue on a jacked pile. In: International Workshop on Constitutive and Centrifuge Modelling: Two Extremes, 8-7-2001 to 13-7-2001, Monte Verita, Switzerland pp. 347-354..

Take, WA and Bolton, MD (2001) The use of centrifuge modelling to investigate progressive failure of overconsolidated clay embankments. In: International Workshop on Constitutive and Centrifuge Modelling: Two Extremes, 8-7-2001 to 13-7-2001, Monte Verita, Switzerland pp. 191-198..

Robertson, D and Bolton, MD (2001) DEM simulations of crushable grains and soils. In: 4th International Conference on Micromechanics of Granular Media Powders and Grains, 21-5-2001 to 25-5-2001, Sendai, Japan pp. 623-626..

Cheng, YP and White, DJ and Bowman, ET and Bolton, MD and Soga, K (2001) The observation of soil microstructure under load. In: 4th International Conference on Micromechanics of Granular Media Powders and Grains, 21-5-2001 to 25-5-2001, Sendai, Japan pp. 69-72..

Borghi, X and White, DJ and Bolton, MD and Springman, SM (2001) Empirical pile design based on CPT data: an explanation for the reduction of unit base resistance between CPTs and piles. In: 5th International Conference on Deep Foundation Practice, -4-2001 to --, Singapore pp. 125-132..

Finlay, TCR and White, DJ and Bolton, MD and Nagayama, T (2001) Press-in piling: The installation of steel tubular piles with and without driving shoes. In: 5th International Conference on Deep Foundation Practice, -4-2001 to --, Singapore pp. 199-208..

Lee, CJ and Bolton, MD and Al Tabbaa, A (2001) Recent findings on negative skin friction on piles and in pile groups in consolidating ground. In: 5th International Conference on Deep Foundation Practice, -4-2001 to --, Singapore pp. 273-280..

Lee, SW and Bolton, MD and Mair, RJ and Soga, K and Dasari, GR and Hagiwara, T (2001) Soil Models and stress paths on injection in sand. In: Conference on Geotechnical Aspects of Underground Construction in Soft Ground, -4-2001 to --, Shanghai, China pp. 626-631..

White, DJ and Take, WA and Bolton, MD (2001) Measuring soil deformation in geotechnical models using digital images and PIV analysis. In: The 10th International Conference on Computer Methods and Advances in Geomechanics, -1-2001 to --, Tuscon, AZ, USA pp. 997-1002..

Joer, H and Bolton, MD and Randolph, MR (2001) Compression and crushing behaviour of calcareous soils. In: International Workshop on Soil Crushability, IWSC'01, --2001 to --, Yamaguchi University, Japan.

Robertson, D and Bolton, MD (2001) DEM simulations of crushable grains and soils. In: 4th International Conference on Micromechanics of Granular Media Powders and Grains, -- to --.

Lee, CJ and Al-Tabbaa, A and Bolton, MD (2001) Development of tensile force in piles in swelling ground. In: UNSPECIFIED pp. 345-350..

Lee, SW and Bolton, MD and Mair, RJ and Soga, K and Dasari, GR and Hagiwara, T (2000) Modelling of injections in sand. In: The International Conference on Tunnels and Underground Structures, 26-11-2000 to 29-11-2000, Singapore pp. 665-670..

Lee, SW and Bolton, MD and Dasari, GR and Mair, RJ and Soga, K and Sugiyama, T and Ano, Y and Hagiwara, T and Nomoto, M (2000) Centrifuge modelling of compensation grouting in dense dry sand. In: International Conference on Geotechnical and Geological Engineering, -11-2000 to --, Melbourne, Australia p.142-..

Lee, CJ and Al Tabbaa, A and Bolton, MD (2000) Numerical modelling of pile behaviour subjected to negative skin friction. In: The Geotech - Year 2000 Conference: Developments in Geotechnical Engineering, Bangkok, Thailand, November 2000, -11-2000 to -- pp. 211-218..

White, DJ and Sidhu, HK and Finlay, TCR and Bolton, MD and Nagayama, T (2000) Press-in piling: the influence of plugging on driveability. In: The 8th International Conference of the Deep Foundations Institute, -10-1999 to --, New York, USA pp. 299-310..

Lee, SW and Bolton, MD and Mair, RJ and Soga, K and Dasari, GR and Hagiwara, T (2000) The influence of injection sequence in compensation grouting. In: 53rd Annual Conference of the Canadian Geotechnical Society; Geotechnical Engineering at the Dawn of the 3rd Millenium, -10-2000 to --, Montreal, Canada pp. 1013-1022..

Lee, SW and Bolton, MD and Mair, RJ and Soga, K and Dasari, GR and Sugiyama, T and Ano, Y and Hagiwara, T and Nomoto, M (2000) The twin tunnels construction at Docklands Light Railway Lewisham Extension, London. In: The 2nd International Conference on Advances in Strategic Technologies (ICAST2000), -- to --.

Sugiyama, T and Nomoto, T and Nomoto, M and Ano, Y and Hagiwara, T and Mair, RJ and Bolton, MD and Soga, K and Nomoto, M (1999) Compensation grouting at the Docklands Light Railway Lewisham Extension project. In: The International Geotechnical Aspects of Underground Construction in Soft Ground, -7-1999 to --, Tokyo, Japan pp. 319-324..

Soga, K and Bolton, MD and Au, SWKA and Komiya, K and Hamelin, A and Van Cotthem, A and Buchet, G and Michel, JP (1999) Development of compensation grouting modelling and control system. In: The International Geotechnical Aspects of Underground Construction in Soft Ground, -7-1999 to --, Tokyo, Japan pp. 425-430..

McDowell, GR and Bolton, MD (1999) Effect of particle size distribution on pile penetration in calcareous sand in the geotechnical centrifuge. In: The 4th International Conference on Deep Foundation Practice, Incorporating Piletalk 99, -7-1999 to --, Singapore.

Gourvenec, SM and Bolton, MD and Soga, K and Gui, MW and Mair, RJ and Edmonds, H and Chudleigh, LJ and Butler, AP (1999) Field investigations of long term ground loading on an old tunnel in London Clay. In: The International Geotechnical Aspects of Underground Construction in Soft Ground, -7-1999 to --, Tokyo, Japan pp. 219-224..

Lee, SW and Dasari, GR and Mair, RJ and Bolton, MD and Soga, K and Sugiyama, T and Ano, Y and Hagiwara, T and Nomoto, M (1999) The effects of compensation grouting on segmental tunnel linings. In: The International Geotechnical Aspects of Underground Construction in Soft Ground, -7-1999 to --, Tokyo, Japan pp. 257-262..

Chin, CY and Bolton, MD (1999) Factors influencing hydro-fracture in clay. In: 13th ASCE Engineering Mechanics Division Conference, 13-6-1999 to 16-6-1999, Baltimore, MD, USA.

Omine, K and Ochiai, H and Bolton, MD (1999) Homogenization method for numerical analysis of improved ground with cement-treated soil columns. In: The International Conference on Dry Mix Methods for Deep Soil Stabilization, -10-1999 to --, Stockholm, Sweden pp. 161-168..

Soga, K and Bolton, MD and Au, SKA and Komiya, K and Hamelin, JP and Van Cotthem, A and Buchet, G and Michel, JP (1999) Development of compensation grouting modelling and control system. In: UNSPECIFIED pp. 525-530..

Gui, MW and Soga, K and Bolton, MD and Hamelin, JP and Hass, G and Burgess, N and Butler, AP (1999) Instrumented borehole drilling using ENPASOL system. In: UNSPECIFIED pp. 577-581..

Gui, MW and Bolton, MD and Garnier, J and Corte, JF and Bagge, G and Laue, J and Renzi, R (1998) Guidelines for cone penetration tests in sand. In: Centrifuge 98: International Conference, 23-9-1998 to 25-9-1998, Tokyo, Japan pp. 155-160..

Garnier, J and Thorel, L and Lynch, RJ and Bolton, MD and Kechavarzi, C and Treadaway, ACJ and Coumolos, H and Soga, K and Konig, D and Rezzoug, A and Heibrock, G and Weststrate, F and Van der Poel, J and Oung, O and Schrijver, R and Taylor, RN and Robson, S and Spiessl, S and Allersma, H and Esposito, G and Davies, MC and Burkhart, S and Merrifield, C and Craig, W (1998) NECER: network of European centrifuges for environmental geotechnic research. In: Centrifuge 98: International Conference, 23-9-1998 to 25-9-1998, Tokyo, Japan pp. 957-982..

Pena, A and Bolton, MD and Pickard, JD (1998) Cellular poroelasticity: A theoretical model for soft tissue mechanics. In: The Biot Conference on Poromechanics, -9-1998 to --, Louvain-la-Neuve, Belgium pp. 475-480..

Treadaway, ACJ and Lynch, RJ and Bolton, MD and Barker, H (1998) Pollutant tracking with in-situ fibre-optic photometric sensors in a geotechnical centrifuge. In: 3rd International Congress on Remediation of Polluted Land and Abandoned Landfills Re-Use or By-Products Risk Analysis, Quality Assurance and Regulations, -9-1998 to --, Lisbon, Portugal pp. 441-448..

Gui, MW and Bolton, MD (1998) Geometry and scale effects in CPT and pile design. In: 1st International Conference on Site Characterization, ISC'98, 19-4-1998 to 22-4-1998, Atlanta, GA, USA pp. 1063-1068..

Bruton, DAS and Bolton, MD and Nicholson, CT (1998) Poseidon project - pipeline design for weak clay. In: 21st Offshore Pipeline Technology Conference, OPT '98, 23-2-1998 to 24-2-1998 pp. 1-21..

Pena, A and Bolton, MD and Pickard, JD (1998) Cellular poroelasticity: A theoretical model for soft tissue mechanics. In: UNSPECIFIED pp. 475-480..

Treadaway, ACJ and Lynch, RJ and Bolton, MD (1998) Pollution transport studies using an in-situ fibre optic photometric sensor. In: UNSPECIFIED pp. 151-160..

Robertson, D and Bolton, MD (1997) Densification by successive crushing of grains. In: 6th International Symposium on Numerical Models in Geomechanics, NUMOG VI, -7-1997 to --, Montreal, Canada pp. 439-444..

McDowell, GR and Bolton, MD (1997) A micro mechanical model for overconsolidated behaviour in soils. In: 3rd International Conference on Powders and Grains, 18-5-1997 to 22-5-1997, Durham; NC, USA pp. 203-206..

Bolton, MD and Barefoot, AJ (1997) The variation of critical pipeline trench back-fill properties. In: Proceedings of IBC Conference on Risk-Based and Limit State Design and Operation of Pipelines, -5-1997 to --, Aberdeen, UK.

Davies, RO and Bolton, MD (1997) Strength of post-liquefaction flows - a speculative velocity dependant model. In: 9th International Conference on Computer Methods and Advances in Geomechanics, 2-11-1997 to 7-11-1997, Wuhan, China pp. 115-122..

Robertson, D and Bolton, MD (1997) Densification by the successive crushing of grains. In: UNSPECIFIED pp. 439-444..

Bolton, MD and McKinley, J (1996) Clastic mechanics. In: IUTAM Symposium on Mechanics of Granular and Porous Materials, 15-7-1996 to 17-7-1996, Cambridge, UK pp. 35-46..

Bolton, MD and Lu, YC and Sharma, JS (1996) Centrifuge models of tunnel construction and compensation grouting. In: International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, 15-4-1996 to 17-4-1996, London, UK pp. 471-478..

Dasari, GR and Rawlings, CG and Bolton, MD (1996) Numerical modelling of a NATM tunnel construction in London clay. In: International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, 15-4-1996 to 17-4-1996, London, UK pp. 491-496..

Sharma, JS and Bolton, MD (1996) Centrifugal and finite element modelling of reinforced embankments on soft clay. In: UNSPECIFIED pp. 267-272..

Bolton, MD and Gui, MW (1995) Modelling of sand over a wide stress range using FLAC. In: 10th Asian Regional Conference on Soil Mechanics and Foundation Engineering, -8-1995 to --, Beijing, China.

Bolton, MD and Chin, CY and Lu, YC (1994) Compensation grouting. In: Centrifuge 94: International Conference, -8-1994 to --, Singapore pp. 719-724..

Bolton, MD and Sharma, J (1994) Embankments with base reinforcement on soft clay. In: Centrifuge 94: International Conference, -8-1994 to --, Singapore pp. 587-592..

Konig, D and Jessberger, HL and Bolton, MD and Phillips, R and Bagge, G and Rienzi, R (1994) Pore pressure measurement during centrifuge model tests: experience of five laboratories. In: Centrifuge 94: International Conference, -8-1994 to --, Singapore pp. 101-108..

Bolton, MD and Dasari, GR and Britto, AM (1994) Putting small strain non-linearity into Modified Cam Clay model. In: 8th International Conference on Computer Methods and Advances in Geomechanics, -5-1994 to --, Morgantown, W Virginia, USA pp. 537-542..

Bolton, MD (1993) Codes, standards and design guides. In: The ICE Conference on Retaining Structures, -7-1992 to --, Cambridge, UK pp. 387-402..

Bolton, MD and Gui, MW and Phillips, R (1993) Review of miniature soil probes for model tests. In: The 11th Southeast Asian Geotechnical Conference, -5-1993 to --, Singapore pp. 85-90..

Bolton, MD (1993) What are partial factors for? In: The International Symposium on Limit State Design in Geotechnical Engineering, -5-1993 to --, Copenhagen, Denmark pp. 565-584..

BOLTON, MD and LEE, DM (1993) BACK-ANALYSIS OF A PILOT-SCALE SHEAR TEST ON COARSE GRANULAR FILL. In: UNSPECIFIED pp. 214-225..

BOLTON, MD (1993) CHAIRMANS REPORT - EMBANKMENTS. In: UNSPECIFIED pp. 923-926..

Bolton, MD (1992) Design methods. In: Predictive Soil Mechanics: the Wroth Memorial Symposium, 27-7-1992 to 29-7-1992, St Catherine’s College, Oxford, UK pp. 50-71..

Springman, SM and Bolton, MD and Sharma, J and Balachandran, S (1992) Modelling and instrumentation of a geotextile in the geotechnical centrifuge. In: The International Symposium on Earth Reinforcement Practice, -11-1992 to --, Fukuoka, Japan pp. 167-172..

BOLTON, MD and SUN, HW (1992) DESIGNING FOUNDATIONS ON CLAY TO LIMIT IMMEDIATE MOVEMENTS. In: UNSPECIFIED pp. 628-641..

Bolton, MD and Sun, HW (1991) Designing foundations on clay to limit immediate movements. In: The 4th International Conference on Ground Movements and Structures, -7-1991 to --, Cardiff, UK.

Springman, SM and Randolph, MF and Bolton, MD (1991) Modelling the behaviour of piles subjected to surcharge loading. In: Centrifuge 91: International Conference on Centrifuge Testing, -6-1991 to --, Boulder, CO, USA pp. 253-260..

Bolton, MD and Sun, HW (1991) The displacement of bridge abutments on clay. In: Centrifuge 91: International Conference on Centrifuge Testing, -6-1991 to --, Boulder, CO, USA pp. 91-98..

Bolton, MD and Wilson, JMR (1990) Soil stiffness and damping. In: 1st European Conference on Structural Dynamics, 5-6-1990 to 7-6-1990, Bochum, Germany pp. 209-216..

Bolton, MD and Springman, SM and Sun, HW (1990) The behaviour of bridge abutments on clay. In: ASCE Specialty Conference on the Design and Performance of Earth Retaining Structures, -6-1990 to --, Ithaca, NY, USA pp. 292-306..

Bolton, MD (1990) State of the art paper: reinforced Soil: laboratory testing and modelling. In: International Conference on Reinforced Soils, --1990 to --, Strathclyde University, UK -..

Bolton, MD and Stewart, DI (1990) The response of nailed walls to the elimination of suction in clay. In: International Conference on Reinforced Soils, --1990 to --, Strathclyde University, UK.

Bolton, MD and Lau, CK (1989) Scale effects in the bearing capacity of granular soils. In: 12th International Conference on Soil Mechanics and Foundation Engineering, 13-8-1989 to 18-8-1989, Rio de Janeiro, Brazil pp. 895-898..

Bolton, MD (1989) The development of codes of practice for design. In: 12th International Conference on Soil Mechanics and Foundation Engineering, 13-8-1989 to 18-8-1989, Rio de Janeiro, Brazil pp. 2073-2076..

Bolton, MD and Lau, CK (1988) Scale effects arising from particle size. In: Centrifuge 88 : the International Conference on Geotechnical Centrifuge Modelling, -4-1988 to --, Paris, France pp. 127-131..

Bolton, MD and Powrie, W and Stewart, DI (1988) The design of deep in-situ walls. In: Centrifuge 88 : the International Conference on Geotechnical Centrifuge Modelling, -4-1998 to --, Paris, France pp. 405-414..

Bolton, MD and Steedman, RS (1985) Modelling the seismic resistance of retaining structures. In: 11th International Conference on Soil mechanics and Foundation Engineering, 12-8-1985 to 16-8-1985, San Francisco, USA pp. 1845-1848..

Bolton, MD and Mak, KW (1984) The application of centrifuge models in the study of an interaction problem. In: The Symposium on the Application of Centrifuge Modelling to Geotechnical Design, -4-1984 to --, Manchester, UK pp. 402-421..

Bolton, MD and Steedman, RS (1984) The behaviour of fixed cantilever walls subject to lateral shaking. In: The Symposium on the Application of Centrifuge Modelling to Geotechnical Design, -4-1984 to --, Manchester, UK pp. 302-314..

Bolton, MD (1984) The development of multi-anchor earth retention systems. In: The Symposium on the Application of Centrifuge Modelling to Geotechnical Design, -4-1984 to --, Manchester, UK pp. 255-271..

Bolton, MD and Steadman, RS (1982) Centrifugal testing of micro-concrete retaining walls subject to base shaking. In: 1st International Conference on Soil Dynamics and Earthquake Engineering, 13-7-1982 to 15-7-1982, Southampton, England pp. 311-329..

Bolton, MD and Choudhury, SP and Pang, PLR (1978) Reinforced earth walls: a centrifugal model study. In: Symposium on Earth Reinforcement, -4-1978 to --, Pittsburg, PA, USA pp. 252-281..

Bolton, MD and Powrie, W and Stewart, DI (1977) Effects on diaphragm walls of groundwater pressure rising in clays. In: 9th European Conference on Soil Mechanics and Foundation Engineering, --1987 to --, Dublin, Ireland pp. 759-762..

Bolton, MD and English, R and Hird, CC and Schofield, AN (1973) Modelling. In: Symposium on the Role of Plasticity in Soil Mechanics, 13-9-1973 to 15-9-1973, Cambridge, UK pp. 251-258..

Monograph

Bhattacharya, S and Madabhushi, SPG and Bolton, MD and Soga, K (2003) A reconsideration of the safety of piled bridge foundations in liquefiable soils. Technical Report. Cambridge University, Department of Engineering.

Bhattacharya, S and Madhabushi, SPG and Bolton, MD (2002) An alternative mechanism of pile failure in liquefiable deposits during earthquakes. Technical Report. Cambridge University, Department of Engineering.

Davey, CA and Fleck, NA and Bolton, MD (2002) The collapse behaviour of a sugar aggregate. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Bolton, MD (2000) The role of micro-mechanics in soil mechanics. Technical Report. Cambridge University Engineering Department, Cambridge.

Other

Bolton, MD (1991) Geotechnical stress analysis for bridge abutment design. Transport and Road Research Laboratory.

Bolton, MD (1991) Geotechnical stress analysis: a possible approach for cantilever retaining walls on spread foundations. Transport and Road Research Laboratory.

Springman, SM and Bolton, MD (1990) The effect of surcharge loading adjacent to piles. Transport and Road Research Laboratory.