Publications by Dr M.P.F. Sutcliffe

Jump to: Article | Book Section | Conference or Workshop Item | Monograph | Thesis

Number of items: 154.

Article

Sutcliffe, MPF and Lemanski, SL and Scott, AE (2012) Measurement of fibre waviness in industrial composite components. COMPOSITES SCIENCE AND TECHNOLOGY, 72. pp. 2016-2023. ISSN 0266-3538

Lemanski, SL and Sutcliffe, MPF (2012) Compressive failure of finite size unidirectional composite laminates with a region of fibre waviness. Composites Part A: Applied Science and Manufacturing, 43. pp. 435-444. ISSN 1359-835X

Monroy Aceves, C and Sutcliffe, MPF and Ashby, MF and Skordos, AA and Rodríguez Román, C (2012) Design methodology for composite structures: A small low air-speed wind turbine blade case study. Materials and Design, 36. pp. 296-305. ISSN 0261-3069

McMillan, AJ and Monroy Aceves, C and Sutcliffe, MPF (2012) Moderate energy impact analysis combining phenomenological contact law with localised damage and integral equation method. International Journal of Impact Engineering, 43. pp. 29-39. ISSN 0734-743X

Sutcliffe, MPF and Monroy Aceves, C and Stronge, WJ and Choudhry, RS and Scott, AE (2012) Moderate speed impact damage to 2D-braided glass-carbon composites. Composite Structures, 94. pp. 1781-1792. ISSN 0263-8223

Liu, F and Sutcliffe, MPF and Graham, WR (2012) Prediction of tread block forces for a free-rolling tyre in contact with a rough road. Wear, 282-28. pp. 1-11. ISSN 0043-1648

Graham, WR and Liu, F and Sutcliffe, MPF and Dale, M (2011) Characterisation and simulation of asphalt road surfaces. WEAR, 271. pp. 734-747. ISSN 0043-1648

Liu, F and Sutcliffe, MPF and Graham, WR (2010) Prediction of tread block forces for a free-rolling tyre in contact with a smooth road. WEAR, 269. pp. 672-683. ISSN 0043-1648

Kim, DJ and Carrera, E and Czosnyka, M and Keong, N and Smielewski, P and Baledent, O and Sutcliffe, MPF and Pickard, JD and Czosnyka, Z (2010) Cerebrospinal compensation of pulsating cerebral blood volume in hydrocephalus. NEUROL RES, 32. pp. 587-592. ISSN 0161-6412

Taviani, V and Patterson, AJ and Graves, MJ and Hardy, CJ and Worters, P and Sutcliffe, MPF and Gillard, JH (2010) Accuracy and Repeatability of Fourier Velocity Encoded M-Mode and Two-Dimensional Cine Phase Contrast for Pulse Wave Velocity Measurement in the Descending Aorta. J MAGN RESON IMAGING, 31. pp. 1185-1194. ISSN 1053-1807

Yoo, SH and Chang, SH and Sutcliffe, MPF (2010) Compressive characteristics of foam-filled composite egg-box sandwich panels as energy absorbing structures. COMPOS PART A-APPL S, 41. pp. 427-434. ISSN 1359-835X

Li, ZY and Taviani, V and Tang, T and Sutcliffe, MP and Gillard, JH (2010) The hemodynamic effects of in-tandem carotid artery stenosis: implications for carotid endarterectomy. J Stroke Cerebrovasc Dis, 19. pp. 138-145.

Taviani, V and Patterson, AJ and Worters, P and Sutcliffe, MPF and Graves, MJ and Gillard, JH (2010) Accuracy of Phase Contrast, Black-Blood, and Bright-Blood Pulse Sequences for Measuring Compliance and Distensibility Coefficients in a Human-Tissue Mimicking Phantom. J MAGN RESON IMAGING, 31. pp. 160-167. ISSN 1053-1807

Kim, DJ and Kasprowicz, M and Carrera, E and Castellani, G and Zweifel, C and Lavinio, A and Smielewski, P and Sutcliffe, MPF and Pickard, JD and Czosnyka, M (2009) The monitoring of relative changes in compartmental compliances of brain. PHYSIOL MEAS, 30. pp. 647-659. ISSN 0967-3334

Barrett, SRH and Sutcliffe, MPF and Howarth, S and Li, ZY and Gillard, JH (2009) Experimental measurement of the mechanical properties of carotid atherothrombotic plaque fibrous cap. Journal of Biomechanics, 42. pp. 1650-1655. ISSN 0021-9290

Kim, DJ and Czosnyka, Z and Keong, N and Radolovich, DK and Smielewski, P and Sutcliffe, MPF and Pickard, JD and Czosnyka, M (2009) Index of cerebrospinal compensatory reserve in hydrocephalus. Neurosurgery, 64. pp. 494-501. ISSN 0148-396X

Wallace, AM and Cutting, ED and Sutcliffe, MPF and Langley Hobbs, SJ (2009) A biomechanical comparison of six different double loop configurations for use in the lateral fabella suture technique. Veterinary and Comparative Orthopaedics and Traumatology, 21. pp. 391-399. ISSN 0932-0814

Lilikakis, A and Sutcliffe, MPF (2009) The effect of vancomycin addition to the compression strength of antibiotic-loaded bone cements. International Orthopaedics, 33. pp. 815-819. ISSN 0341-2695

Kratmann, KK and Sutcliffe, MPF and Lilleheden, LT and Pyrz, R and Thomsen, OT (2009) A novel image analysis procedure for measuring fibre misalignment in undirectional fibre composites. Composites Science and Technology, 69. pp. 228-238. ISSN 0266-3538

Li, ZY and Tang, T and U King Im, J and Graves, M and Sutcliffe, MPF and Gillard, JH (2008) Assessment of carotid plaque vulnerability using structural and geometric determinants. Circulation Journal, 72. pp. 1092-1099. ISSN 1346-9843

Monroy Aceves, C and Skordos, AA and Sutcliffe, MPF (2008) Design selection methodology for composite structures. Materials and Design, 29. pp. 418-426. ISSN 0261-3069

Zumpano, Z and Fox, M and Stronge, WJ and Sutcliffe, MPF (2008) Impact damage in hybrid braided twill composites. Journal of Materials Science, 43. pp. 6668-6675. ISSN 0022-2461

Fox, MN and Sutcliffe, MPF (2008) Modelling material transfer in metal rolling using plasticine. Wear, 264. pp. 18-25. ISSN 0043-1648

Liu, F and Sutcliffe, MPF and Graham, WR (2008) Modelling of tread block contact mechanics using linear viscoelastic theory. Tire Science and Technology, 36. pp. 211-226.

Skordos, AA and Sutcliffe, MPF (2008) Stochastic simulation of woven composites forming. Composites Science and Technology, 68. pp. 283-296. ISSN 0266-3538

Chung, JG and Chang, SH and Sutcliffe, MPF (2007) Deformation and energy absorption of composite egg-box panels. Composites Science and Technology, 67. pp. 2342-2349. ISSN 0266-3538

Liu, F and Sutcliffe, MPF (2007) Modelling of delamination of ultra low-k material during chemical mechanical polishing. Tribology Letters, 25. pp. 225-236. ISSN 1023-8883

Skordos, AA and Monroy Aceves, C and Sutcliffe, MPF (2007) A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites. Composites Part A, 38. pp. 1318-1330. ISSN 1359-835X

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Miller, DB (2006) Experimental investigation of roughening of the matt surface in pack rolling. Journal of Materials Processing Technology, 177. pp. 501-504.

H R, L and M P F, S (2006) A multi-scale model for friction in cold rolling of aluminium alloy. Tribology Letters, 22. pp. 95-104.

Le, HR and Sutcliffe, MPF and Wang, P and Burstein, GT (2005) Surface generation and boundary lubrication in bulk forming of aluminium alloy. WEAR, 258. pp. 1567-1576. ISSN 0043-1648

Wang, P and Burstein, GT and Le, HR and Sutcliffe, MPF (2005) The electrode potential of freshly generated aluminium surfaces in lubricating oil. TRIBOL LETT, 18. pp. 487-491. ISSN 1023-8883

A, S and H R, L and M P F, S (2005) An efficient finite element model of surface pit reduction on stainless steel in metal forming processes. Journal of Materials Processing Technology, 170. pp. 310-316.

H R, L and M P F, S and J A, W (2005) Friction and material transfer in micro-scale sliding contact between aluminium alloy and steel. Tribology Letters, 18. pp. 99-104.

H R, L and M P, S and J A, W (2005) Friction and material transfer in micro-scale sliding contact between aluminium alloy and steel. Tribology Letters, 18. pp. 99-104. ISSN 1023-8883

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, P and Miller, DB (2005) Influence of friction on roughening of the matt surface in aluminium pack rolling. International Journal of Machine Tools and Manufacture, 45. pp. 803-809. ISSN 0890-6955

H R, L and M P F, S and P Z, W and G T, B (2005) Surface generation and boundary lubrication in bulk forming of aluminium alloy. Wear, 258. pp. 1567-1576.

P Z, W and G T, B and H R, L and M P F, S (2005) The electrode potential of freshly generated aluminium surfaces in lubricating oil. Tribology Letters, 18. pp. 487-491.

Le, HR and Sutcliffe, MPF and Wang, PZ and Burstein, GT (2004) Surface oxide fracture in cold aluminium rolling. ACTA MATER, 52. pp. 911-920. ISSN 1359-6454

H R, L and M P F, S and P Z, W and G T, B (2004) Surface oxide fracture in cold aluminium rolling. Acta Materialia, 52. pp. 911-920. ISSN 1359-6454

Lee, HR and Sutcliffe, MPF (2004) Finite element modelling of the evolution of surface pits in metal forming processes. Journal of Materials Processing Technology, 145. pp. 391-396. ISSN 0924-0136

H R, L and M P F, S (2004) The effect of surface deformation on lubrication and oxide scale fracture in cold metal rolling. Metallurgical and Materials Transactions B, 35. pp. 919-928.

Liu, D and Fleck, NA and Sutcliffe, MPF (2004) Compressive strength of composites with random fibre waviness. Journal of the Mechanics and Physics and Solids, 52. pp. 1481-1505.

Sutcliffe, MPF and Combarieu, R and Montmitonnet, P (2004) Effect of additives on friction during plane strain compression of aluminium strip. Wear, 257. pp. 1071-1080.

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2004) Evolution of matt surface topography in aluminium pack rolling: Part I – model development. International Journal of Mechanical Sciences, 46. pp. 1349-1364. ISSN 0020-7403

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2004) Evolution of matt surface topography in aluminium pack rolling: Part II – effect of material properties. International Journal of Mechanical Sciences, 46. pp. 1365-1375. ISSN 0020-7403

Le, HR and Sutcliffe, MPF and Williams, JA (2004) Friction and material transfer in micro-scale sliding contact between aluminium alloy and steel. Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2004. pp. 309-316.

Chang, SH and Sutcliffe, MPF and Sharma, SB (2004) Microscopic investigation of tow geometry changes in a woven prepreg material during draping. Composites Science and Technology, 64. pp. 1701-1707. ISSN 0266-3538

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2004) Three-dimensional topography of the matt surface in aluminium pack rolling. International Journal of Mechanical Sciences, 46. pp. 1083-1096. ISSN 0020-7403

Utsunoyima, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2004) Three-dimensional topography of the matt surface in aluminium pack rolling. International Journal of Mechanical Sciences, 46. pp. 1083-1096. ISSN 0020-7403

Sharma, SB and Sutcliffe, MPF (2004) A simplified finite element model for draping of woven material. Composites A: Applied Science and Manufacturing, 35. pp. 637-643. ISSN 1359-835X

Sharma, SB and Sutcliffe, MPF and Chang, SH (2003) Characterisation of material properties for draping of dry woven composite material. COMPOS PART A-APPL S, 34. pp. 1167-1175. ISSN 1359-835X

Sutcliffe, MPF and Sharma, SB (2003) Draping of woven fabrics progressive drape model. Plastics Rubber and Composites, 32. pp. 57-64. ISSN 1465-8011

H R, L and M P F, S (2003) Evolution of surface pits on stainless steel strip in cold rolling and strip drawing. Transactions of the ASME: Journal of Tribology, 125. pp. 384-390. ISSN 0742-4787

Chang, SH and Sharma, SB and Sutcliffe, MPF (2003) Microscopic investigation of tow geometry of a dry satin weave fabric during deformation. Composites Science and Technology, 63. pp. 99-111. ISSN 0266-3538

M P F, S and H R, L and D, F (2003) Simulation of transfer layer formation in strip drawing of stainless steel. Wear, 254. pp. 523-531. ISSN 0043-1648

Sutcliffe, MPF and Combarieu, R and Repoux, M and Montmitonnet, P (2003) Tribology of plane strain compression tests on aluminium strip using ToF-SIMS analysis of transfer films. Wear, 254. pp. 65-79. ISSN 0043-1648

H R, L and M P F, S (2003) A friction model for cold strip rolling with two-wavelength surface roughness in the "mixed" lubrication regime. Transactions of the ASME: Journal of Tribology, 125. pp. 670-677. ISSN 0742-4787

Sutcliffe, MPF and Georgiades, F (2002) Characterisation of pit geometry in cold-rolled stainless steel strip. Wear, 253. pp. 963-974. ISSN 0043-1648

H R, L and M P F, S (2002) Measurements of friction in strip drawing under thin film lubrication. Tribology International, 35. pp. 123-128. ISSN 0301-679X

H R, L and M P F, S (2002) Rolling of thin strip and foil: application of a tribological model for "mixed" lubrication. Transactions of the ASME: Journal of Tribology, 124. pp. 129-136. ISSN 0742-4787

Le, HR and Sutcliffe, MPF (2001) A robust model for rolling of thin strip and foil. INT J MECH SCI, 43. pp. 1405-1419. ISSN 0020-7403

Sutcliffe, MPF and Yuwono, AH (2001) Experimental study of microbuckle initiation in a model composite system. Scripta Materialia, 45. pp. 831-837. ISSN 1359-6462

Court, RS and Sutcliffe, MPF and Tavakoli, SM (2001) Ageing of adhesively bonded joints-fracture and failure analysis using video imaging techniques. International Journal of Adhesion and Adhesives, 21. pp. 455-463. ISSN 0143-7496

M P F, S and H R, L and R, A (2001) Modeling of micro-pit evolution in rolling or strip-drawing. Transactions of the ASME: Journal of Tribology, 123. pp. 791-798. ISSN 0742-4787

Sutcliffe, MPF and Montmitonnet, P (2001) Numerical modelling of lubricated foil rolling | Un modèle de lubrification en laminage à froid. Revue de Metallurgie. Cahiers D'Informations Techniques, 98. pp. 435-442. ISSN 0035-1563

Le, HR and Sutcliffe, MPF (2001) Rolling of thin strip and foil: Application of a tribological model for "mixed" lubrication. American Society of Mechanical Engineers, Tribology Division, TRIB. pp. 1-8.

Ahmed, R and Sutcliffe, MPF (2001) An experimental investigation of surface pit evolution during cold-rolling or drawing of stainless steel strip. Transactions of the ASME: Journal of Tribology, 123. pp. 1-7. ISSN 0742-4787

Creighton, CJ and Sutcliffe, MPF and Clyne, TW (2001) A multiple field image analysis procedure for characterisation of fibre alignment in composites. Composites Part A: Applied Science and Manufacturing, 32. pp. 221-229. ISSN 1359-835X

Creighton, CJ and Sutcliffe, MPF and Clyne, TW (2001) A multiple field image analysis procedure for characterisation of fibre alignment in composites. COMPOS PART A-APPL S, 32. pp. 221-229. ISSN 1359-835X

H R, L and M P F, S (2001) A semi-empirical friction model for cold metal rolling. Tribology Transactions, 44. pp. 284-290. ISSN 0569-8197

H R, L and M P F, S (2000) Analysis of surface roughness of cold-rolled aluminium foil. Wear, 244. pp. 71-78. ISSN 0043-1648

Ahmed, R and Sutcliffe, MPF (2000) Identification of surface features on cold-rolled stainless steel strip. Wear, 244. pp. 60-70. ISSN 0043-1648

Petras, A and Sutcliffe, MPF (2000) Indentation failure analysis of sandwich beams. Composite Structures, 50. pp. 311-318. ISSN 0263-8223

Sutcliffe, MPF and Lee, HR (2000) Measurements of surface roughness in cold metal rolling in the mixed lubrication regime. Tribology Transactions, 43. pp. 39-44. ISSN 0569-8197

Lee, HR and Sutcliffe, MPF (2000) A two-wavelength model of surface flattening in cold metal rolling with mixed lubrication. Tribology Transactions, 43. pp. 595-602. ISSN 0569-8197

Sutcliffe, MPF and Petras, A (1999) Failure mode maps for honeycomb sandwich panels. Composite Structures, 44. pp. 237-252. ISSN 0263-8223

Sutcliffe, MPF (1999) Flattening of random rough surfaces in metal-forming processes. Transactions of the ASME: Journal of Tribology, 121. pp. 433-440. ISSN 0742-4787

Petras, A and Sutcliffe, MPF (1999) Indentation resistance of sandwich beams. Composite Structures, 46. pp. 413-424. ISSN 0263-8223

Sutcliffe, MPF and Rayner, PJ (1998) Experimental measurements of load and strip profile in thin strip rolling. International Journal of Mechanical Sciences, 40. pp. 887-900. ISSN 0020-7403

Sutcliffe, MPF and Fleck, NA and Xin, XJ (1997) Prediction of compressive toughness for fibre composites (vol 452, pg 2443, 1996). P ROY SOC LOND A MAT, 453. pp. 1119-1120. ISSN 1364-5021

Sivashanker, S and Fleck, NA and Sutcliffe, MPF (1997) Microbuckle propagation in fibre composites. Acta Materialia, 45. pp. 921-932. ISSN 1359-6454

Fleck, NA and Sutcliffe, MPF and Sivashankar, S and Xin, XJ (1996) Compressive R-curve of a carbon fibre-epoxy matrix composite. Composites Part B: Engineering, 27. pp. 531-542. ISSN 1359-8368

Fleck, NA and Sutcliffe, MPF (1996) Compressive R-curve of a carbon fibre-epoxy matrix composite. Composites Part B: Engineering, 27. pp. 531-542. ISSN 1359-8368

Tabary, PE and Sutcliffe, MPF and Porral, F and Deneuville, P (1996) Measurements of friction in cold metal rolling. Transactions of the ASME: Journal of Tribology, 118. pp. 629-636. ISSN 0742-4787

Sivashanker, S and Fleck, NA and Sutcliffe, MPF (1996) Microbuckle propagation in a unidirectional carbon fibre-epoxy matrix composite. Acta Materialia, 44. pp. 2581-2590. ISSN 1359-6454

Sutcliffe, MPF and Fleck, NA and Xin, XJ (1996) Prediction of compressive toughness for fibre composites. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 452. pp. 2443-2465. ISSN 1364-5021

Sutcliffe, MPF and Fleck, NA and Xin, XJ (1996) Prediction of compressive toughness for fibre composites. Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 452. pp. 2443-2465. ISSN 1364-5021

Sutcliffe, MPF and Fleck, NA (1994) Microbuckle propagation in carbon fibre-epoxy composites. Acta Metallurgica et Materialia, 42. pp. 2219-2231. ISSN 0956-7151

Sutcliffe, MPF and Fleck, NA (1993) Effect of geometry on compressive failure of notched composites. International Journal of Fracture, 59. pp. 115-132. ISSN 0376-9429

Sutcliffe, MPF (1991) Measurements of the rheological properties of a kerosene metal-rolling lubricant. Proceedings of the Institution of Mechanical Engineers, B: Management and Engineering Manufacture, B205. pp. 215-219. ISSN 0263-7154

Sutcliffe, MPF (1991) Traction measurements in mixed elastohydrodynamic lubrication with a controlled circumferential roughness. Proceedings of the Institution of Mechanical Engineers, C: Mechanical Engineering Sciences, C205. pp. 265-273. ISSN 0263-7154

Sutcliffe, MPF (1990) Central film thickness charts for elliptical contacts. Proceedings of the Institution of Mechanical Engineers, C: Mechanical Engineering Sciences, 204. pp. 273-275. ISSN 0954-4062

Sutcliffe, MPF (1990) Experimental measurements of lubricant film thickness in cold strip rolling. Proceedings of the Institution of Mechanical Engineers, C: Mechanical Engineering Sciences, C204. pp. 263-273. ISSN 0263-7154

SUTCLIFFE, MPF and JOHNSON, KL (1990) LUBRICATION IN COLD STRIP ROLLING IN THE MIXED REGIME. P I MECH ENG B-J ENG, 204. pp. 249-261. ISSN 0954-4054

SUTCLIFFE, MPF (1989) CENTRAL FILM THICKNESSES IN ELLIPTICAL CONTACTS. P I MECH ENG C-J MEC, 203. pp. 387-392. ISSN 0954-4062

Sutcliffe, MPF (1989) Central film thicknesses in elliptical contacts. Proceedings of the Institution of Mechanical Engineers, C: Journal of Mechanical Engineering Sciences, 203. pp. 387-392. ISSN 0954-4062

Sutcliffe, MPF (1988) Surface asperity deformation in metal forming processes. International Journal of Mechanical Sciences, 30. pp. 847-868. ISSN 0020-7403

Stronge, WJ and Sutcliffe, MPF and Yu, T (1986) Wrinkling of elastoplastic circular plates during stamping. Experimental Mechanics, 26. pp. 345-353. ISSN 0014-4851

Book Section

Sutcliffe, MPF (2002) Surface finish and friction in cold metal rolling. In: Metal Forming Science and Practice: A State-of-The-Art Volume in Honour of Profesor J.A. Schey’s 80th Birthday. Elsevier Press. ISBN 008044024X

Conference or Workshop Item

Aceves, CM and McMillan, AJ and Sutcliffe, MPF and Stronge, WJ and Choudhry, RS and Care, ICD (2010) Low-Speed Impact Damage in Hybrid 2D-Braided Composite Plates. In: UNSPECIFIED pp. 306-313..

Monroy Aceves, C and Sutcliffe, MPF and Ashby, MF and Skordos, AA (2009) Design selection of a wind turbine blade using prepreg materials. In: 17th International Conference on Composite Materials, ICCM' 09, 27-7-2009 to 31-7-2009, Edinburgh, Scotland.

Zumpano, Z and Sutcliffe, MPF and Monroy Aceves, C and Stronge, WJ and Fox, M (2009) Impact damage to 3D woven CFRP composites plates. In: 17th International Conference on Composite Materials, ICCM' 09, 27-7-2009 to 31-7-2009, Edinburgh, Scotland.

Taviani, V and Patterson, AJ and Wong, P and Sutcliffe, MPF and Graves, MJ and Gillard, JH (2009) Phantom investigation on the accuracy of different pulse sequences for the determination of arterial distensibility. In: 17th International Society for Magnetic Resonance in Medicine, ISMRM' 09, 18-4-2009 to 24-4-2009, Honolulo, Hawaii -..

Sutcliffe, MPF and Huang, Y and Maguire, JJ and Davenport, AP (2009) In vitro measurement of diseased coronary artery mechanical properties. In: 4th International Symposium on Biomechanics in Vascular Biology and Cardiovascular Disease, 16-4-2009 to 17-4-2009, Rotterdam, Netherlands.

Taviani, V and Sutcliffe, MPF and Wong, P and Li, ZY and Young, V and Graves, MJ and Gillard, JH (2008) In vivo non-invasive high resolution MR-based method for the determination of the elastic modulus of arterial vessels. In: 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC'08, 20-8-2008 to 24-8-2008, Vancouver, British Columbia, Canada.

Taviani, V and Li, ZY and Young, V and Sutcliffe, MPF and Wong, P and Graves, MJ and Gillard, JH (2008) In vivo MRI-based estimation of time-dependent elastic modulus in healthy arteries. In: ASME 2008 Summer Bioengineering Conference (SBC2008), 25-6-2008 to 29-6-2008, Marco Island, Florida, USA.

Sutcliffe, MPF and Maguire, JJ and Davenport, AP (2008) Correlation of the pharmacological response of human normal and diseased coronary arteries to endothelin-1 with passive stiffness. In: 3rd International Symposium on Biomechanics in Vascular Biology and Cardiovascular Disease, 24-4-2008 to 25-4-2008, Rotterdam, Netherlands.

Taviani, V and Li, ZY and Young, V and Sutcliffe, MPF and Wong, P and Graves, MJ and Gillard, JH (2008) In vivo non-invasive high-resolution MR-phase-contrast-based determination of time-dependent elastic modulus in healthy arteries. In: 3rd International Symposium on Biomechanics in Vascular Biology and Cardiovascular Disease, 24-4-2008 to 25-4-2008, Rotterdam, Netherlands.

Li, ZY and Taviani, V and Tang, TY and Graves, MJ and U King–Im, JM and Sutcliffe, MPF and Gillard, JH (2008) The haemodynamic effects of in tandem carotid artery stenosis: implications for carotid endarterectomy. In: 3rd International symposium on Biomechanics in Vascular Biology and Cardiovascular Disease, 24-4-2008 to 25-4-2008, Rotterdam, Netherlands.

Sutcliffe, MPF (2007) Effect of roughness in cold metal rolling. In: 3rd International Conference on Tribology in Manufacturing Processes, ICTMP 2007, 24-9-2007 to 26-9-2007, Yokohama, Japan.

Sutcliffe, MPF and Fox, MN and Daley, JAB (2007) Modelling of transfer film formation in rolling using plasticine. In: 3rd International Conference on Tribology in Manufacturing Processes, ICTMP 2007, 24-9-2007 to 26-9-2007, Yokohama, Japan.

Liu, F and Sutcliffe, MPF and Graham, WR (2007) Prediction of tread block forces for free-rolling tyres. In: 26th Annual Meeting and Conference on Fire Science and Technology, 25-9-2007 to 26-9-2007, Akron, OH, USA.

Scott, P and Lees, JM and Sutcliffe, MPF (2007) Novel modelling of solution uptake in CFRP tendons. In: The 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, FRPRCS' 07, 16-7-2007 to 18-7-2007, Patras, Greece pp. 516-519..

Zumpano, G and Sutcliffe, MPF and Stronge, WJ (2007) Impact damage to textile composites. In: DFC9: Deformation and Fracture of Composites, 11-4-2007 to 13-4-2007, Sheffield, UK.

Sutcliffe, MPF (2006) Micromechanics and compressive loading of composite materials. In: 27th Risoe International Symposium on Materials Science: Polymer Composite Materials for Wind Power Turbines, 4-9-2006 to 7-9-2006, Roskilde, Denmark pp. 49-68..

Sutcliffe, MPF (2006) Micromechanics and compressive loading of composite materials. In: 27th Riso International Symposium on Materials Science; Polymer Composite Materials for Wind Power Turbines, -9-2006 to --, Roskilde, Denmark pp. 49-68..

Skordos, A and Sutcliffe, MPF (2006) Stochastic geometric properties of woven textiles. In: 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, -5-2006 to --, Newport, R.I, USA pp. 7163-7172..

Sutcliffe, MPF and Liu, F (2006) Development of a process map for low-k materials. In: 16th CMP Users Meeting, Semicon Europa, 7-4-2006 to --, Munich, Germany.

Skordos, A and Sutcliffe, MPF and Klintworth, JW and Adolfsson, JP (2006) Multi-objective optimisation of woven composite draping using genetic algorithms. In: 27th International SAMPE Europe Conference, 28-3-2006 to 30-3-2006, Paris, France.

Long, ACA and Skordos, A and Sutcliffe, MPF (2006) Optimisation of forming in woven composites manufacturing using variable peripheral pressure. In: 27th International SAMPE Europe Conference, 27-3-2006 to 29-3-2006, Paris, France.

Lillikakis, A and Sutcliffe, MPF (2006) The effect of vancomycin on the compression strength of bone cement. In: 62nd Panhellenic Orthopaedic Congress, 3-10-2006 to 7-10-2006, Athens, Greece.

Skordos, A and Sutcliffe, MPF (2006) Geometrical variability of woven textiles. In: 8th International Conference on Textile Composites (TEXCOMP), 16-10-2006 to 18-10-2006, Nottingham, UK.

Utsunoyima, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DB (2005) Evolution of matt surface topography in aluminium pack rolling. In: Proceedings of the 3rd ASME World Tribology Congress, 12-9-2005 to 16-9-2005, Washington D.C., USA pp. 813-814..

Utsunomiya, H and Sutcliffe, MPF and Shercliff, HR and Bate, PS and Miller, DP (2005) Evolution of matt surface topography in aluminium pack rolling. In: 3rd Conference on World Tribology Congress, -9-2005 to --, Washington, DC, USA 63172-..

Sutcliffe, MPF and Liu, F and Cheng, L (2005) Process map development for chemical mechanical polishing with low-k material. In: 3rd Conference on World Tribology Congress, -9-2005 to --, Washington, DC, UK pp. 411-412..

Skordos, AA and Aceves, CM and Sutcliffe, MPF (2005) Design selection methodology for composite structures. In: 15th International Conference on Composite Materials; ICCM' 05, -6-2005 to --, Durban, South Africa pp. 109-110..

Skordos, AA and Sutcliffe, MPF and Aceves, CM (2005) Development of a simplified finite element model for draping and wrinkling of woven material. In: 8th International Conference on Material Forming, -4-2005 to --, Cluj-Napoca, Romania pp. 951-954..

H R, L and M P F, S and P Z, W and G T, B (2004) Development of metal-to-metal contact in forming of aluminium with boundary lubrication. In: 2nd International Conference on International Conference on Tribology in Manufacturing Processes (ICTMP2004), 15-6-2004 to 18-6-2004, Nyborg, Denmark.

Sutcliffe, MPF and Combarieu, R and Montmitonnet, P (2004) Plane strain compression tests of aluminium strip under boundary lubrication conditions. In: 2nd International Conference on International Conference on Tribology in Manufacturing Processes (ICTMP2004), 15-6-2004 to 18-6-2004, Nyborg, Denmark.

Sharma, SB and Sutcliffe, MPF (2003) A simplified finite element approach to draping of woven fabric. In: 6th International ESAFORM Conference on Material Forming, 28-4-2003 to 30-4-2003, Salerno, Italy pp. 887-890..

Sutcliffe, MPF and Combarieu, R and Repoux, M and Montmitonnet, P (2002) Characterisation of friction during plane strain compression tests on aluminium strip. In: The Colloquium on Friction and Wear in Metal Forming, -6-2002 to --, Valenciennes, France pp. 141-148..

H R, L and M P F, S (2002) The role of lubricant entrapment in the evolution of surface pits in metal forming processes. In: The Colloquium on Friction and Wear in Metal Forming, -6-2002 to --, Valenciennes, France pp. 47-54..

Long, AC and Gil, RG and Clifford, MJ and Harrison, P and Sharma, SB and Sutcliffe, MPF (2002) Experimental analysis of fabric deformation during forming of textile composites. In: The 5th International ESAFORM Conference on Material Forming, -4-2002 to --, Cracow, Poland pp. 279-282..

Sutcliffe, MPF and Sharma, SB and Long, AC and Clifford, MJ and Gil, RG and Harrison, P and Rudd, CD (2002) A comparison of simulation approaches for forming of textile composites. In: The 5th International ESAFORM Conference on Material Forming, -4-2002 to --, Cracow, Poland pp. 311-314..

Sharma, SB and Sutcliffe, MPF (2002) Draping of woven fabrics: a progressive drape model. In: The 9th International Conference on Fibre Reinforced Composites, -3-2002 to --, Newcastle upon Tyne, UK pp. 337-344..

Court, RS and Tavakoli, SM and Sutcliffe, MPF (2002) Predicting adhesive joint life-times. In: 25th Annual Meeting of the Adhesion Society / 2nd World Congress on Adhesion and Related Phenomena (WCARPII), 10-2-2002 to 14-2-2002, Orlando, FL, USA.

H R, L and M P F, S (2002) Evolution of surface pits on stainless steel strip in cold rolling and strip drawing. In: ASME/STLE Joint International Tribology Conference 2002, 27-10-2002 to 30-10-2002, Cancun, Mexico.

Sharma, SB and Sutcliffe, MPF (2001) Draping of woven composites over irregular surfaces. In: 13th International Conference on Composite Materials (ICCM-13), 25-6-2001 to 29-6-2001, Beijing, China.

Sharma, SB and Sutcliffe, MPF and Cliffort, MJ and Long, AC (2001) Experimental investigation of tow deformation during draping of woven fabrics. In: The 4th International Conference on Material Forming, ESAFORM, -4-2001 to --, Liege, Belgium pp. 107-110..

Ahmed, R and Sutcliffe, MPF (2000) Analysis of micro-plasto-hydrodynamic lubrication using strip drawing rig. In: UNSPECIFIED pp. 329-342..

Court, RS and Sutcliffe, MPF and Tavakoli, SM (1999) Fracture and failure analysis of adhesively bonded joints by video imaging techniques. In: 7th International Conference on Adhesion and Adhesives, -9-1999 to --, Cambridge, UK pp. 237-242..

Ahmed, R and Sutcliffe, MPF (1999) Evolution of surface finish within the roll bite during cold rolling of stainless steel. In: 3rd International Conference on Modelling of Metal Rolling Processes, 13-12-1999 to 15-12-1999, London, UK pp. 390-399..

H R, L and M P F, S (1999) Surface finish of cold rolled aluminium foil. In: 3rd International Conference on Modelling of Metal Rolling Processes, 13-12-1999 to 15-12-1999, London, UK pp. 468-476..

Sutcliffe, MPF and Montmitonnet, PA (1999) A coupled tribological and mechanical model for thin foil rolling in the mixed lubrication regime. In: 3rd International Conference on Modelling of Metal Rolling Processes, 13-12-1999 to 15-12-1999, London, UK pp. 187-196..

Sutcliffe, MPF and Fleck, NA (1992) Compressive failure of notched carbon fibre-epoxy laminates. In: European Conference on Composites Testing and Standardisation, -9-1992 to --, Amsterdam, Netherlands pp. 123-132..

Monograph

Sutcliffe, MPF and Combarieu, R and Repoux, M and Montmitonnet, P (2002) Tribology of plane strain compression tests on aluminium strip using ToF-SIMS analysis of transfer films. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Sutcliffe, MPF and Xin, XJ and Fleck, NA and Curtis, PT (2000) Composite compressive strength modeller, version 1.4. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Xin, XJ and Sutcliffe, MPF and Fleck, NA and Curtis, PT (1995) Cambridge Composite Designer: a users' manual. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Thesis

Sutcliffe, MPF (1989) Friction and lubrication in metal rolling. PhD thesis, UNSPECIFIED.

This list was generated on Thu Jan 17 04:07:46 2013 GMT.