Publications by Prof. N.A. Fleck

Number of items: 464.

Article

Pingle, SM and Fleck, NA and Wadley, HNG and Deshpande, VS (2012) Discrete element calculations of the impact of a sand column against rigid structures. International Journal of Impact Engineering, 45. pp. 74-89. ISSN 0734-743X

McShane, GJ and Pingle, SM and Deshpande, VS and Fleck, NA (2012) Dynamic buckling of an inclined strut. International Journal of Solids and Structures. ISSN 0020-7683

Park, S and Russell, BP and Deshpande, VS and Fleck, NA (2012) Dynamic compressive response of composite square honeycombs. Composites Part A: Applied Science and Manufacturing, 43. pp. 527-536. ISSN 1359-835X

Danas, K and Deshpande, VS and Fleck, NA (2012) Size effects in the conical indentation of an elasto-plastic solid. Journal of the Mechanics and Physics of Solids. ISSN 0022-5096

Danas, K and Deshpande, VS and Fleck, NA (2012) Size effects in the conical indentation of an elasto-plastic solid. Journal of the Mechanics and Physics of Solids, 60. pp. 1605-1625. ISSN 0022-5096

Russell, BP and Liu, T and Fleck, NA and Deshpande, VS (2012) The soft impact of composite sandwich beams with a square-honeycomb core. International Journal of Impact Engineering, 48. pp. 65-81. ISSN 0734-743X

Pingle, SM and Fleck, NA and Deshpande, VS and Wadley, HNG (2011) Collapse mechanism maps for a hollow pyramidal lattice. P ROY SOC A-MATH PHY, 467. pp. 985-1011. ISSN 1364-5021

Tagarielli, VL and Fleck, NA and Colella, A and Matteazzi, P (2011) Mechanical properties and deformation mechanisms of nanocrystalline Fe/Cu 60/40 composites. J MATER SCI, 46. pp. 385-393. ISSN 0022-2461

Tagarielli, VL and Fleck, NA (2011) The Shear Response of a Thin Aluminum Layer. J APPL MECH-T ASME, 78. -. ISSN 0021-8936

Pingle, SM and Fleck, NA and Deshpande, VS and Wadley, HNG (2011) Collapse mechanism maps for the hollow pyramidal core of a sandwich panel under transverse shear. International Journal of Solids and Structures. ISSN 0020-7683

Park, S and Russell, BP and Deshpande, VS and Fleck, NA (2011) Dynamic compressive response of composite square honeycombs. Composites Part A: Applied Science and Manufacturing. ISSN 1359-835X

Wang, M and Fleck, NA and Evans, AG (2011) Elastodynamic Erosion of Thermal Barrier Coatings. Journal of the American Ceramic Society. ISSN 1551-2916

Wang, M and Fleck, NA and Evans, AG (2011) Elastodynamic erosion of thermal barrier coatings. Journal of the American Ceramic Society, 94. S160-S167. ISSN 0002-7820

Bizard, AF and Symons, DD and Fleck, NA and Durban, D (2011) Flow of damp powder in a rotating impervious cone. Transactions of the ASME, Journal of Applied Mechanics, 78. 021017-. ISSN 0021-8936

Russell, BP and Liu, T and Fleck, NA and Deshpande, VS (2011) Quasi-static three-point bending of carbon fiber sandwich beams with square honeycomb cores. Journal of Applied Mechanics, Transactions ASME, 78. ISSN 0021-8936

Nachum, S and Fleck, NA (2011) The microstructure and mechanical properties of ball-milled stainless steel powder: The effect of hot-pressing vs. laser sintering. Acta Materialia, 59. pp. 7300-7310. ISSN 1359-6454

Russell, BP and Liu, T and Fleck, NA and Deshpande, VS (2011) The soft impact of composite sandwich beams with a square-honeycomb core. International Journal of Impact Engineering. ISSN 0734-743X

Fleck, NA and Deshpande, VS and Ashby, MF (2010) Micro-architectured materials: past, present and future. P ROY SOC A-MATH PHY, 466. pp. 2495-2516. ISSN 1364-5021

Nachum, S and Fleck, NA and Ashby, MF and Colella, A and Matteazzi, P (2010) The microstructural basis for the mechanical properties and electrical resistivity of nanocrystalline Cu-Al2O3. MAT SCI ENG A-STRUCT, 527. pp. 5065-5071. ISSN 0921-5093

Cocks, ACF and Fleck, NA (2010) Constrained sintering of an air-plasma-sprayed thermal barrier coating. ACTA MATER, 58. pp. 4233-4244. ISSN 1359-6454

Tagarielli, VL and Deshpande, VS and Fleck, NA (2010) Prediction of the dynamic response of composite sandwich beams under shock loading. INT J IMPACT ENG, 37. pp. 854-864. ISSN 0734-743X

Comley, K and Fleck, NA (2010) The toughness of adipose tissue: measurements and physical basis. J Biomech, 43. pp. 1823-1826.

Fleck, NA and Zisis, T (2010) The erosion of EB-PVD thermal barrier coatings: The competition between mechanisms. WEAR, 268. pp. 1214-1224. ISSN 0043-1648

Rubino, V and Deshpande, VS and Fleck, NA (2010) The three-point bending of Y-frame and corrugated core sandwich beams. INT J MECH SCI, 52. pp. 485-494. ISSN 0020-7403

Zisis, T and Fleck, NA (2010) The elastic-plastic indentation response of a columnar thermal barrier coating. WEAR, 268. pp. 443-454. ISSN 0043-1648

Xu, JY and Lu, TJ and Hodson, HP and Fleck, NA (2010) Analysis of thermal dispersion in an array of parallel plates with fully-developed laminar flow. INT J HEAT FLUID FL, 31. pp. 57-69. ISSN 0142-727X

Danas, K and Deshpande, VS and Fleck, NA (2010) Compliant interfaces: A mechanism for relaxation of dislocation pile-ups in a sheared single crystal. INT J PLASTICITY, 26. pp. 1792-1805. ISSN 0749-6419

McShane, GJ and Deshpande, VS and Fleck, NA (2010) Underwater blast response of free-standing sandwich plates with metallic lattice cores. INT J IMPACT ENG, 37. pp. 1138-1149. ISSN 0734-743X

Comley, K and Fleck, NA (2010) A micromechanical model for the Young's modulus of adipose tissue. INT J SOLIDS STRUCT, 47. pp. 2982-2990. ISSN 0020-7683

Quintana-Alonso, I and Mai, SP and Fleck, NA and Oakes, DCH and Twigg, MV (2010) The fracture toughness of a cordierite square lattice. ACTA MATER, 58. pp. 201-207. ISSN 1359-6454

Idiart, MI and Fleck, NA (2010) Size effects in the torsion of thin metal wires. Modelling and Simulation in Materials Science and Engineering, 18. 015009-. ISSN 0965-0393

Zisis, T and Fleck, NA (2010) The elastic-plastic indentation response of a columnar thermal barrier coating. Wear, 268. pp. 443-454. ISSN 0043-1648

Mai, SP and Fleck, NA (2009) Reticulated tubes: effective elastic properties and acutation response. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 465. pp. 685-708. ISSN 1364-5021

Alonso, IQ and Fleck, NA (2009) The Damage Tolerance of a Sandwich Panel Containing a Cracked Honeycomb Core. J APPL MECH-T ASME, 76. -. ISSN 0021-8936

Liu, QD and Fleck, NA and Huber, JE and Chu, DP (2009) Birefringence measurements of creep near an electrode tip in transparent PLZT. Journal of the European Ceramic Society, 29. pp. 2289-2296. ISSN 0955-2219

Quintana Alonso, I and Fleck, NA (2009) Compressive response of a sandwich plate containing a cracked diamond-celled lattice. Journal of the Mechanics and Physics of Solids, 57. pp. 1545-1567. ISSN 0022-5096

Pane, I and Fleck, NA and Chu, DP and Huber, JE (2009) Mechanical constraint and loading on ferroelectric memory capacitors. Materials Research Society Symposium Proceedings, 1160. pp. 87-97. ISSN 0272-9172

Zhu, H and Chu, DP and Fleck, NA and Rowley, SE and Saxena, SS (2009) Polarization change in ferroelectric thin film capacitors under external stress. Journal of Applied Physics, 105. 061609-. ISSN 0021-8979

Tagarielli, VL and Deshpande, VS and Fleck, NA (2009) Prediction of the dynamic response of composite sandwich beams under shock loading. International Journal of Impact Engineering. ISSN 0734-743X

Idiart, MI and Deshpande, VS and Fleck, NA and Willis, JR (2009) Size effects in the bending of thin foils. International Journal of Engineering Science. ISSN 0020-7225

Tilbrook, MT and Deshpande, VS and Fleck, NA (2009) Underwater blast loading of sandwich beams: regimes of behaviour. International Journal of Solids and Structures, 46. pp. 3209-3221. ISSN 0020-7683

Rubino, V and Deshpande, VS and Fleck, NA (2009) The dynamic response of clamped rectangular Y-frame and corrugated core sandwich plates. European Journal of Mechanics - A / Solids, 28. pp. 14-24. ISSN 0997-7538

Pane, I and Fleck, NA and Chu, DP and Huber, JE (2009) The influence of mechanical constraint upon the switching of a ferroelectric memory capacitator. European Journal of Mechanics - A / Solids, 28. pp. 195-201. ISSN 0997-7538

Fleck, NA and Willis, JR (2009) A mathematical basis for strain-gradient plasticity theory - Part I: scalar plastic multiplier. Journal of the Mechanics and Physics of Solids, 57. pp. 161-177. ISSN 0022-5096

Comley, K and Fleck, NA (2009) The mechanical response of porcine adipose tissue. ASME Journal of Biomechanical Engineering. ISSN 0148-0731

Fleck, NA and Willis, JR (2009) A multi-scale constitutive model for the sintering of an air-plasma-sprayed thermal barrier coating, and its response under hot isostatic pressing. Journal of the Mechanics and Physics of Solids, 57. pp. 689-705. ISSN 0022-5096

Côté, F and Russel, BP and Deshpande, VS and Fleck, NA (2009) The through-thickness compressive strength of a composite sandwich panel with a hierarchical square honeycomb sandwich core. Transactions of the ASME, Journal of Applied Mechanics, 76. 061004-. ISSN 0021-8936

McShane, GJ and Stewart, C and Aronson, MT and Wadley, HNG and Fleck, NA and Deshpande, VS (2008) Dynamic rupture of polymer-metal bilayer plates. INT J SOLIDS STRUCT, 45. pp. 4407-4426. ISSN 0020-7683

Rubino, V and Deshpande, VS and Fleck, NA (2008) The dynamic response of end-clamped sandwich beams with a Y-frame or corrugated core. INT J IMPACT ENG, 35. pp. 829-844. ISSN 0734-743X

Pane, I and Fleck, NA and Huber, JE and Chu, DP (2008) Effect of geometry upon the performance of a thin film ferroelectric capacitor. INT J SOLIDS STRUCT, 45. pp. 2024-2041. ISSN 0020-7683

Idiart, MI and Fleck, NA (2008) The Effect of Interfaces on the Plastic Behaviour of Periodic Composites. Philosophical Magazine, 88. pp. 3633-3653. ISSN 1478-6435

Srikantha Phani, A and Fleck, NA (2008) Elastic boundary layers in two-dimensional isotropic lattices. Transactions of the ASME, Journal of Applied Mechanics, 75. 021020-021028. ISSN 0021-8936

Pane, I and Fleck, NA and Chu, DP and Huber, JE (2008) Predicted performance of ferroelectric memory capacitators under mechanical constraint. Ferroelectrics, 370. pp. 219-225. ISSN 0015-0193

Rubino, V and Deshpande, VS and Fleck, NA (2008) The collapse response of sandwich beams with a Y-frame core subjected to distributed and local loading. International Journal of Mechanical Sciences, 50. pp. 233-246. ISSN 0020-7403

Tagarielli, VL and Deshpande, VS and Fleck, NA (2008) The high strain rate response of PVC foams and end-grain balsa wood. COMPOS PART B-ENG, 39. pp. 83-91. ISSN 1359-8368

Symons, DD and Fleck, NA (2008) The imperfection sensitivity of isotropic two-dimensional elastic lattices. Transactions of the ASME, Journal of Applied Mechanics, 75. 151011-. ISSN 0021-8936

Fleck, NA and Willis, JR (2008) A mathematical basis for strain-gradient plasticity theory. Part II: tensorial plastic multiplier. Journal of the Mechanics and Physics of Solids, 57. pp. 1045-1057. ISSN 0022-5096

Zisis, A and Fleck, NA (2007) Mechanisms of elastodynamic erosion of electron-beam thermal barrier coatings. INT J MATER RES, 98. pp. 1196-1202. ISSN 1862-5282

Quintana Alonso, I and Fleck, NA (2007) Damage tolerance of an elastic-brittle diamond-celled honeycomb. Scripta Materialia, 56. pp. 693-696.

Radford, DD and McShane, GJ and Deshpande, VS and Fleck, NA (2007) Dynamic compressive response of stainless-steel square honeycombs. Transactions of the ASME, Journal of Applied Mechanics, 74. pp. 658-667. ISSN 0021-8936

Tilbrook, MT and Radford, DD and Deshpande, VS and Fleck, NA (2007) Dynamic crushing of sandwich panels with prismatic lattice cores. International Journal of Solids and Structures, 44. pp. 6101-6123. ISSN 0020-7683

Kazemahvazi, S and Radford, D and Deshpande, VS and Fleck, NA (2007) Dynamic failure of clamped circular plates subjected to an underwater shock. Journal of Mechanics and Materials Structures, 2. pp. 2007-2023. ISSN 1559-3959

McShane, GJ and Stewart, C and Aronson, MT and Wadley, HNG and Fleck, NA and Deshpande, VS (2007) Dynamic rupture of polymer-metal bilayer plates. International Journal of Solids and Structures. ISSN 0020-7683

Pane, I and Fleck, NA and Huber, JE and Chu, DP (2007) Effect of geometry upon the performance of a thin film ferroelectric capacitor. International Journal of Solids and Structures. ISSN 0020-7683

Côté, F and Fleck, NA and Deshpande, VS (2007) Fatigue performance of sandwich beams with a pyramidal core. International Journal of Fatigue, 29. pp. 1402-1412. ISSN 0142-1123

Mai, SP and Fleck, NA and Lu, TJ (2007) Optimal design of box-section sandwich beams in three-point bending. International Journal of Solids and Structures, 44. pp. 4742-4769. ISSN 0020-7683

Zhu, H and Chu, DP and Fleck, NA and Pane, I and Natori, E (2007) Polarization change of PZTN ferroelectric thin film capacitors under tensile stress.

Zhu, H and Chu, DP and Fleck, NA and Pane, I and Huber, JE and Natori, E (2007) Polarization change of PZTN ferroelectric thin films under uniform in-plane tensile stress. Integrated Ferroelectrics, 95. pp. 117-127. ISSN 1058-4587

Cote, F and Deshpande, VS and Fleck, NA (2007) Shear fatigue strength of a prismatic diamond sandwich core. Scripta Materialia, 56. pp. 585-588. ISSN 1359-6462

Borg, U and Fleck, NA (2007) Strain gradient effects in surface roughening. Modelling and Simulation in Materials Science and Engineering, 15. S1-S12. ISSN 0965-0393

McMeeking, RM and Spuskanyuk, AV and He, MY and Deshpande, VS and Fleck, NA and Evans, AG (2007) An analytical model for the response to water blast of unsupported metallic sandwich panels. International Journal of Solids and Structures. ISSN 0020-7683

Quintana Alonso, I and Fleck, NA (2007) The damage tolerance of a sandwich panel containing a cracked honeycomb core. Transactions of the ASME, Journal of Applied Mechanics. ISSN 0021-8936

Fleck, NA and Qiu, X (2007) The damage tolerance of elastic-brittle, two dimensional isotropic lattices. Journal of the Mechanics and Physics of Solids, 55. pp. 562-588.

Tagarielli, VL and Deshpande, VS and Fleck, NA (2007) The dynamic response of composite sandwich beams to transverse impact. International Journal of Solids and Structures, 44. pp. 2442-2457. ISSN 0020-7683

Rubino, V and Deshpande, VS and Fleck, NA (2007) The dynamic response of end-clamped sandwich beams with a Y-frame or corrugated core. International Journal of Impact Engineering. ISSN 0734-743X

Romijn, NER and Fleck, NA (2007) The fracture toughness of planar lattices: imperfection sensitivity. Journal of the Mechanics and Physics of Solids, 55. ISSN 0022-5096

Tagarielli, VL and Deshpande, VS and Fleck, NA (2007) The high strain rate response of PVC foams and end-grain balsa wood. Composites B: Engineering. ISSN 1359-8368

McShane, GJ and Deshpande, VS and Fleck, NA (2007) The underwater blast resistance of metallic sandwich beams with prismatic lattice cores. Transactions of the ASME Journal of Applied Mechanics, 74. pp. 352-364. ISSN 0021-8936

Luo, JK and Pritschow, M and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2006) Effects of process conditions on properties of electroplated Ni thin films for microsystem applications. Journal of the Electrochemical Society, 153. D155-D161. ISSN 0013-4651

Evans, AG and Fleck, NA and Faulhaber, S and Vermaak, N and Maloney, M and Darolia, R (2006) Scaling laws governing the erosion and impact resistance of thermal barrier coatings. Wear, 260. pp. 886-894.

Phani, AS and Woodhouse, J and Fleck, NA (2006) Wave propagation in two-dimensional periodic lattices. Journal of the Acoustical Society of America, 119. pp. 1995-2005. ISSN 0001-4966

Rathbun, HJ and Radford, DD and Xue, Z and He, MY and Yang, J and Deshpande, V and Fleck, NA and Hutchinson, JW and Zok, FW and Evans, AG (2006) Performance of metallic honeycomb-core sandwich beams under shock loading. INT J SOLIDS STRUCT, 43. pp. 1746-1763. ISSN 0020-7683

Luo, JK and Lin, M and Fu, YQ and Wang, L and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2006) MEMS based digital variable capacitors with a high-k dielectric insulator. Sensors and Actuators A: Physical, 132. pp. 139-146.

Luo, JK and Huang, R and He, JH and Fu, YQ and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2006) Modelling and fabrication of low operation temperature microcages with a polymer/metal/DLC trilayer structure. Sensors and Actuators A: Physical, 132. pp. 346-353. ISSN 0924-4247

Pedersen, CBW and Deshpande, VS and Fleck, NA (2006) Compressive response of the Y-shaped sandwich core. European Journal of Mechanics - A / Solids, 25. pp. 125-141. ISSN 0997-7538

Pedersen, CBW and Fleck, NA and Ananthasuresh, GK (2006) Design of a compliant mechanism to convert an actuator characteristic to a constant output force. Transactions of the ASME, Journal of Mechanical Design, 128. pp. 1101-1112. ISSN 1050-0472

Shieh, J and Huber, JE and Fleck, NA (2006) Fatigue crack growth in ferroelectrics under electrical loading. Journal of the European Ceramic Society, 26. pp. 95-109.

Steeves, CA and Fleck, NA (2006) In-plane properties of composite laminates with through-thickness pin reinforcement. International Journal of Solids and Structures, 43. pp. 3197-3212. ISSN 0020-7683

Th, Z and N A, F (2006) Mechanisms of elastodynamic erosion of electron-beam thermal barrier coatings. International Journal of Fracture. ISSN 0376-9429

Suiker, SJ and Fleck, NA (2006) Modelling of fatigue crack tunnelling and delamination in layered composites. Composites Part A: Applied Science and Manufacturing, 37. pp. 1722-1733. ISSN 1359-835X

Rathbun, HJ and Radford, DD and Xue, Z and He, MY and Yang, J and Deshpande, VS and Fleck, NA and Hutchinson, JW and Zok, FW and Evans, AG (2006) Performance of metallic honeycomb-core sandwich beams under shock loading. International Journal of Solids and Structures, 43. pp. 1746-1763. ISSN 0020-7683

Akisanya, AR and Fleck, NA (2006) Plastic collapse of thin-walled frusta and egg-box material under shear loading and normal loading. International Journal of Mechanical Sciences, 48. pp. 799-808. ISSN 0020-7403

Côté, F and Deshpande, VS and Fleck, NA and Evans, AG (2006) The compressive and shear responses of corrugated and diamond lattice materials. International Journal of Solids and Structures, 43. pp. 6220-6242. ISSN 0020-7683

C?t?, F and Deshpande, VS and Fleck, NA and Evans, AG (2006) The compressive and shear responses of corrugated and diamond lattice materials. International Journal of Solids and Structures, 43. pp. 6220-6242. ISSN 0020-7683

Engelen, RAB and Fleck, NA and Peerlings, RHJ and Geers, MGD (2006) An evaluation of higher-order plasticity theories for predicting size effects and localisation. International Journal of Solids and Structures, 43. pp. 1857-1877. ISSN 0020-7683

Symons, DD and Fleck, NA (2006) The imperfection sensitivity of isotropic two-dimensional elastic lattices. Journal of the Mechanics and Physics of Solids. ISSN 0022-5096

Tilbrook, MT and Deshpande, VS and Fleck, NA (2006) The impulsive response of sandwich beams: analytical and numerical investigation of regimes of behaviour. Journal of the Mechanics and Physics of Solids, 54. pp. 2242-2280.

Shergold, OA and Fleck, NA and King, T (2006) The penetration of a soft solid by a liquid jet, with application to the administration of a needle-free injection. Journal of Biomechanics, 39. pp. 2593-2602. ISSN 0021-9290

Radford, DD and Deshpande, VS and Fleck, NA (2006) The response of clamped sandwich beams subjected to shock loading. International Journal of Impact Engineering, 32. pp. 968-987. ISSN 0734-743X

Radford, DD and McShane, GJ and Deshpande, VS and Fleck, NA (2006) The response of clamped sandwich plates with metallic foam cores to simulated blast loading. International Journal of Solids and Structures, 43. pp. 2243-2259. ISSN 0020-7683

Cote, F and Deshpande, VS and Fleck, NA (2006) The shear response of metallic square honeycombs. Journal of Mechanics and Materials Structures, 1. pp. 1281-1299. ISSN 1559-3959

Hutchinson, RG and Fleck, NA and Cocks, ACF (2006) A sintering model for thermal barrier coatings. Acta Materialia, 54. pp. 1297-1306. ISSN 1359-6454

Hutchinson, RG and Fleck, NA (2006) The structural performance of the periodic truss. Journal of the Mechanics and Physics of Solids, 54. pp. 756-782.

Quinn, DJ and Spearing, SM and Ashby, MF and Fleck, NA (2006) A systematic approach to process selection in MEMS. Journal of Microelectromechanical Systems, 15. pp. 1039-1050. ISSN 1057-7157

Deshpande, VS and Heaver, A and Fleck, NA (2006) An underwater shock simulator. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 462. pp. 1021-1041. ISSN 1364-5021

Shergold, OA and Fleck, NA and Radford, D (2006) The uniaxial stress versus strain response of pig skin and silicone rubber at low and high strain rates. International Journal of Impact Engineering, 32. pp. 1384-1402. ISSN 0734-743X

Borg, U and Niordson, CF and Fleck, NA and Tvergaard, V (2006) A viscoplastic strain gradient analysis of materials with voids or inclusions. International Journal of Solids and Structures, 43. pp. 4906-4916. ISSN 0020-7683

Zhu, HX and Fleck, NA and Cocks, ACF and Evans, AG (2005) Numerical simulations of crack formation from pegs in thermal barrier systems with NiCoCrAlY bond coats. Materials Science and Engineering A, 404. pp. 26-32. ISSN 0921-5093

Zhu, HX and Fleck, NA and Cocks, ACF and Evans, AG (2005) Numerical simulations of crack formation from pegs in thermal barrier systems with NiCoCrAlY bond coats. MAT SCI ENG A-STRUCT, 404. pp. 26-32. ISSN 0921-5093

Hutchinson, RG and Fleck, NA (2005) Microarchitectured cellular solids - the hunt for statically determinate periodic trusses - Plenary lecture presented at the 75th Annual GAMM Conference, Dresden, Germany, 22-26 March 2004. ZAMM-Z ANGEW MATH ME, 85. pp. 607-617. ISSN 0044-2267

Luo, JK and He, JH and Fu, YQ and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2005) Fabrication and characterization of diamond-like carbon/Ni bimorph normally closed microcages. Journal of Micromechanics and Microengineering, 15. pp. 1406-1413.

Fleck, NA and Deshpande, VS (2005) Closure to "Discussion of 'The resistance of clamped sandwich beams to shock loading' " (2005, ASME J. Appl. Mech., 72, pp. 978-979). J APPL MECH-T ASME, 72. p. 980. ISSN 0021-8936

Symons, DD and Hutchinson, JW and Fleck, NA (2005) Actuation of the Kagome double layer grid: Part 1: prediction of the performance of the perfect structure. Journal of the Mechanics and Physics of Solids, 53. pp. 1855-1874. ISSN 0022-5096

Symons, DD and Shieh, J and Fleck, NA (2005) Actuation of the Kagome double layer grid: Part 2: effect of imperfections on measured and predicted actuation stiffness. Journal of the Mechanics and Physics of Solids, 53. pp. 1875-1891. ISSN 0022-5096

Symons, DD and Hutchinson, RG and Fleck, NA (2005) Actuation of the kagome double layer grid. Part 1: Prediction of performance of the perfect structure. Journal of the Mechanics and Physics of Solids, 53. pp. 1855-1874. ISSN 0022-5096

Fleck, NA and Deshpande, VS (2005) Closure to discussion of the resistance of clamped sandwich beams to shock loading. Transactions of the ASME, Journal of Applied Mechanics, 72. pp. 978-979. ISSN 0021-8936

Luo, JK and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2005) Comparison of microtweezers based on three lateral thermal actuator configurations. Journal of Micromechanics and Microengineering, 15. pp. 1294-1302. ISSN 0960-1317

Steeves, CA and Fleck, NA (2005) Compressive strength of composite laminates with terminated internal plies. Composites Part A: applied science and manufacturing, 36. pp. 798-805. ISSN 1359-835X

Peerlings, RHJ and Fleck, NA (2005) Computational evaluation of strain gradient constants. International Journal for Multiscale Computational Engineering, 2. pp. 599-619. ISSN 1543-1649

Luo, JK and He, JH and Flewitt, AJ and Moore, D and Spearing, SM and Fleck, NA and Milne, WI (2005) Development of all metal electro-thermal actuator and its applications. Journal of Microlithography, Microfabrication, and Microsystems (JM3), 04. 023012-. ISSN 1537-1646

Luo, J and He, JH and Flewitt, A and Moore, DF and Spearing, SM and Fleck, NA and Milne, WI (2005) Development of all metal electrothermal actuator and its applications. Journal of Microlithography, Microfabrication and Microsystems, 4. pp. 1-9. ISSN 1537-1646

Tan, PJ and Reid, SR and Harrigan, JJ and Fleck, NA and Deshpande, VS (2005) Discussion: "The resistance of clamped sandwich beams to shock loading" (Fleck, N. A., and Deshpande, V. S., 2004, ASME J. Appl. Mech., 71, pp. 386-401). Journal of Applied Mechanics, Transactions ASME, 72. pp. 978-980. ISSN 0021-8936

Shergold, OA and Fleck, NA (2005) Experimental investigation into the deep penetration of soft solids by sharp and blunt punches, with application to the piercing of skin. ASME Transactions, Journal of Biomechanical Engineering, 127. pp. 838-848. ISSN 0148-0731

Qiu, X and Deshpande, VS and Fleck, NA (2005) Impulsive loading of clamped monolithic and sandwich beams over a central patch. Journal of the Mechanics and Physics of Solids, 53. pp. 1015-1046. ISSN 0022-5096

Bell, DJ and Lu, TJ and Fleck, NA and Spearing, SM (2005) MEMS actuators and sensors: observations on their performance and selection for purpose. Jounal of Micromechanics and Microengineering, 15. S153-S164. ISSN 0960-1317

Hutchinson, RG and Fleck, NA (2005) Microarchitectured cellular solids – the hunt for statically determinate periodic trusses. Zeitschrift fur Angewandte Mathematik und Mechanik, 85. pp. 607-617.

Deshpande, VS and Fleck, NA (2005) One-dimensional response of sandwich plates to underwater shock loading. Journal of the Mechanics and Physics of Solids, 53. pp. 2347-2383. ISSN 0022-5096

Luo, JK and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2005) Three types of planar structure microspring electro-thermal actuators with insulating beam constraints. Journal of Micromechanics and Microengineering, 15. pp. 1527-1535. ISSN 0960-1317

Luo, JK and Chu, DP and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2005) Uniformity control of Ni thin-film microstructures deposited by through-mask plating. Journal of the Electrochemical Society, 152. C36-C41. ISSN 0013-4651

McShane, GJ and Deshpande, VS and Fleck, NA (2005) An assessment of the blast resistance of sandwich beams. Computational Plasticity: Fundamentals and Applications - Proceedings of the 8th International Conference on Computational Plasticity, COMPLAS VIII. pp. 1138-1141.

Tagarielli, VL and Fleck, NA (2005) A comparison of the structural response of clamped and simply supported sandwich beams with aluminium faces and a metal foam core. ASME Transactions, Journal of Applied Mechanics, 72. pp. 408-417. ISSN 0021-8936

Tagarielli, VL and Deshpande, VS and Fleck, NA and Chen, C (2005) A constitutive model for transversely isotropic foams, and its application to the indentation of balsa wood. International Journal of Mechanical Sciences, 47. pp. 666-686. ISSN 0020-7403

Tagarielli, VL and Deshpande, VS and Fleck, NA and Chen, C (2005) A constitutive model for transversely isotropic foams: application to the indentation of balsa wood. International Journal of Mechanical Sciences, 47. pp. 666-686. ISSN 0020-7403

Sridhar, I and Fleck, NA (2005) The multiaxial yield behaviour of an aluminium alloy foam. Journal of Materials Sciences, 40. pp. 4005-4008. ISSN 0022-2461

McShane, GJ and Radford, DD and Deshpande, VS and Fleck, NA (2005) The response of clamped sandwich plates with lattice cores subjected to shock loading. European Journal of Mechanics - A / Solids, 25. pp. 215-229. ISSN 0997-7538

Radford, DD and Deshpande, VS and Fleck, NA (2005) The use of metal foam projectiles simulate shock loading on a structure. International Journal of Impact Engineering, 31. pp. 1152-1171. ISSN 0734-743X

Radford, DD and Deshpande, VS and Fleck, NA (2005) The use of metal foam projectiles to simulate shock loading on a structure. International Journal of Impact Engineering, 31. pp. 1152-1171. ISSN 0734-743X

Côte, F and Deshpande, VS and Fleck, NA and Evans, AG (2004) The out-of-plane compressive behavior of metallic honeycombs. Materials Sciences and Engineering A, 380. pp. 272-280. ISSN 0921-5093

Luo, JK and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2004) Young's modulus of electroplated Ni thin film for MEMS applications. Materials Letters, 58. pp. 2306-2309. ISSN 0167-577X

Luo, JK and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2004) Normally closed microgrippers using a highly stressed diamond-like carbon and Ni bimorph structure. Applied Physics Letters, 85. pp. 5748-5750. ISSN 0003-6951

Luo, JK and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2004) Novel normally-off microgrippers using highly stressed diamond-like carbon and Ni bimorph structure. Applied Physics Letters, 85. pp. 5748-5750. ISSN 0003-6951

Fleck, NA and Willis, JR (2004) Bounds and estimates for the effect of strain gradients upon the effective plastic properties of an isotropic two phase composite. Journal of the Mechanics and Physics of Solids, 52. pp. 1855-1888.

Steeves, C and Fleck, NA (2004) Collapse mechanisms of sandwich beams with composite face sheets and a foam core, loaded in three-point bending: Part I: analytical models and minimum weight design. International Journal of Mechanical Sciences, 46. pp. 561-583. ISSN 0020-7403

Steeves, C and Fleck, NA (2004) Collapse mechanisms of sandwich beams with composite face sheets and a foam core, loaded in three-point bending: Part II: experimental investigation and numerical modelling. International Journal of Mechanical Sciences, 46. pp. 585-608. ISSN 0020-7403

Tagarielli, VL and Fleck, NA and Deshpande, VS (2004) Collapse of clamped and simply supported composite sandwich beams in three-point bending. Composites B: Engineering, 35. pp. 523-534. ISSN 1359-8368

Liu, D and Fleck, NA and Sutcliffe, MPF (2004) Compressive strength of composites with random fibre waviness. Journal of the Mechanics and Physics and Solids, 52. pp. 1481-1505.

Suiker, ASJ and Fleck, NA (2004) Crack tunnelling and plane-strain delamination in layered solids. International Journal of Fracture, 125. pp. 1-32. ISSN 0376-9429

Luo, JK and He, JH and Flewitt, AJ and Moore, DF and Spearing, SM and Fleck, NA and Milne, WI (2004) Development of all metal electro-thermal actuator and its applications. Proceedings of SPIE - The International Society for Optical Engineering, 5344. pp. 201-210. ISSN 0277-786X

Qiu, X and Deshpande, VS and Fleck, NA (2004) Dynamic response of a clamped circular sandwich plate subject to shock loading. ASME Transactions, Journal of Applied Mechanics, 71. pp. 637-645. ISSN 0021-8936

Huber, JE and Fleck, NA (2004) Ferroelectric switching – a micromechanics model versus measured behaviour. European Journal of Mechanics - A / Solids, 23. pp. 203-217. ISSN 0997-7538

Suiker, ASJ and Fleck, NA (2004) Frictional collapse of granular assemblies. ASME Transactions, Journal of Applied Mechanics, 71. pp. 350-358.

Steeves, C and Fleck, NA (2004) Material selection in sandwich beam construction. Scripta Materialia, 50. pp. 1335-1339. ISSN 1359-6462

Chen, X and He, MY and Spitsberg, I and Fleck, NA and Hutchinson, JW and Evans, AW (2004) Mechanisms governing the high temperature erosion of thermal barrier coatings. Wear, 256. pp. 735-746.

Cartié, DR and Cox, BN and Fleck, NA (2004) Mechanisms of crack bridging by composite and metallic rods. Composites Part A: Applied Science and Manufacturing, 35. pp. 1325-1336. ISSN 1359-835X

Shergold, OA and Fleck, NA (2004) Mechanisms of deep penetration of soft solids, with application to the injection and wounding of skin. Proceedings of the Royal Society of London A, 460. pp. 3037-3058. ISSN 1364-5021

Tagarielli, VL and Fleck, NA and Deshpande, VS (2004) The collapse response of sandwich beams with aluminium face sheets and a metal foam core. Advanced Engineering Materials, 6. pp. 440-443. ISSN 1438-1656

C?te, F and Deshpande, VS and Fleck, NA and Evans, AG (2004) The out-of-plane compressive behavior of metallic honeycombs. Materials Sciences and Engineering A, 380. pp. 272-280. ISSN 0921-5093

Zupan, M and Deshpande, VS and Fleck, NA (2004) The out-of-plane compressive behaviour of woven-core sandwich plates. European Journal of Mechanics - A / Solids, 23. pp. 411-421. ISSN 0997-7538

Fleck, NA and Deshpande, VS (2004) The resistance of clamped sandwich beams to shock loading. Transactions of the ASME, Journal of Applied Mechanics, 71. pp. 386-401. ISSN 0021-8936

Davy, CA and Bolton, MD and Fleck, NA (2004) The shearing behaviour of a sugar aggregate. Acta Materialia, 52. pp. 3587-3601. ISSN 1359-6454

Shieh, J and Huber, JE and Fleck, NA (2003) An evaluation of switching criteria for ferroelectrics under stress and electric field. Acta Materialia, 51. pp. 6123-6137. ISSN 1359-6454

Fleck, NA and Deshpande, VS (2003) Energy absorption of an egg-box material. Journal of the Mechanics and Physics of Solids, 51. pp. 187-208. ISSN 0022-5096

Chen, C and Fleck, NA and Shen, YP (2003) Experimental and micromechanical study of size effects in the constrained deformation of metallic foams. Key Engineering Materials, 243-24. pp. 421-426. ISSN 1013-9826

Wadley, HNG and Fleck, NA and Evans, AG (2003) Fabrication and structural performance of periodic cellular metal sandwich structures. Composites Science and Technology, 63. pp. 2331-2343. ISSN 0266-3538

Wadley, HNG and Fleck, NA and Evans, AG (2003) Fabrication and structural performance of periodic cellular metal sandwich structures. Composites Science and Technology, 63. pp. 2331-2343.

Qiu, X and Deshpande, VS and Fleck, NA (2003) Finite element analysis of the dynamic response of clamped sandwich beams subject to shock loading. European Journal of Mechanics - A / Solids, 22. pp. 801-814. ISSN 0997-7538

Hutchinson, RG and Wicks, N and Evans, AG and Fleck, NA and Hutchinson, JW (2003) Kagome plate structures for actuation. International Journal of Solids and Structures, 40. pp. 6969-6980. ISSN 0020-7683

Cartie, DD and Fleck, NA (2003) The effect of pin reinforcement upon the through-thickness compressive strength of foam-cored sandwich panels. Composites Science and Technology, 63. pp. 2401-2409. ISSN 0266-3538

Zupan, M and Chen, C and Fleck, NA (2003) The plastic collapse and energy absorption capacity of egg-box panels. International Journal of Mechanical Sciences, 45. pp. 851-871. ISSN 0020-7403

Fleck, NA and Ashby, MF and Hutchinson, JW (2003) The role of geometrically necessary dislocations in giving material strengthening. Scripta Materialia, 48. pp. 179-183. ISSN 1359-6462

Zupan, M and Ashby, MF and Fleck, NA (2002) Actuator classification and selection - the development of a database. Advanced Engineering Materials, 4. pp. 933-940. ISSN 1438-1656

Chen, C and Fleck, NA and Ashby, MF (2002) Creep response of sandwich beams with a metallic foam core. Advanced Engineering Materials, 4. pp. 777-780. ISSN 1438-1656

Sridhar, I and Fleck, NA (2002) End compression of sandwich columns. Composites Part A: Applied Science and Manufacturing, 33. pp. 353-359. ISSN 1359-835X

Bart Smith, H and Hutchinson, JW and Fleck, NA and Evans, AG (2002) Influence of imperfections on the performance of metal foam core sandwich panels. International Journal of Solids and Structures, 39. pp. 4999-5012. ISSN 0020-7683

Bart-Smith, H and Hutchinson, JW and Fleck, NA and Evans, AG (2002) Influence of imperfections on the performance of metal foam core sandwich panels. International Journal of Solids and Structures, 39. pp. 4999-5012. ISSN 0020-7683

Fleck, NA and Chen, C (2002) Size effects in the constrained deformation of metallic foams. Journal of the Mechanics and Physics of Solids, 50. pp. 955-977. ISSN 0022-5096

Chen, C and Fleck, NA (2002) Size effects in the constrained deformation of metallic foams. Journal of the Mechanics and Physics of Solids, 50. pp. 955-977. ISSN 0022-5096

Olurin, OB and Fleck, NA and Ashby, MF (2001) Tensile and compressive failure of notched cellular foams. ADV ENG MATER, 3. pp. 55-58. ISSN 1438-1656

Shu, JY and Van der Giessen, E and Fleck, NA and Needleman, A (2001) Boundary layers in constrained plastic flow: comparison of nonlocal and discrete dislocation plasticity. Journal of the Mechanics and Physics of Solids, 49. pp. 1361-1395. ISSN 0022-5096

Sridhar, I and Fleck, NA and Akisanya, AR (2001) Cold compaction of an array of cylindrical fibres. International Journal of Mechanical Sciences, 43. pp. 715-742. ISSN 0020-7403

Deshpande, VS and Fleck, NA (2001) Collapse of truss core sandwich beams in 3-point bending. International Journal of Solids and Structures, 38. pp. 6275-6305. ISSN 0020-7683

Schmidt, I and Fleck, NA (2001) Ductile fracture of two-dimensional cellular structures. International Journal of Fracture, 111. pp. 327-342. ISSN 0376-9429

Chen, C and Lu, TJ and Fleck, NA (2001) Effect of inclusions and holes on the stiffness and strength of honeycombs. International Journal of Mechanical Sciences, 43. pp. 487-504. ISSN 0020-7403

Deshpande, VS and Fleck, NA (2001) Effective properties of the octet-truss lattice material. Journal of the Mechanics and Physics of Solids, 49. pp. 1747-1769. ISSN 0022-5096

Olurin, OB and McCullough, KY and Fleck, NA and Ashby, MF (2001) Fatigue crack propagation in aluminium alloy foams. International Journal of Fatigue, 23. pp. 375-382. ISSN 0142-1123

Deshpande, VS and Ashby, MF and Fleck, NA (2001) Foam topology: bending versus stretching dominated architectures. International Journal of Solids and Structures, 49. pp. 1035-1040. ISSN 1359-6454

Choi, SH and Song, BG and Kang, KJ and Fleck, NA (2001) Fracture of a ductile layer constrained by stiff substrates. Fatigue and Fracture of Engineering Materials and Structures, 24. pp. 1-13. ISSN 8756-758X

Fleck, NA and Liu, D (2001) Microbuckle initiation from a patch of large amplitude fibre waviness in a composite under compression and bending. European Journal of Mechanics, Series A; Solids, 20. pp. 23-38. ISSN 0997-7538

Chen, C and Fleck, NA and Lu, TJ (2001) Mode I crack growth resistance of metallic foams. Journal of the Mechanics and Physics of Solids, 49. pp. 231-259. ISSN 0022-5096

Huber, JE and Fleck, NA (2001) Multi-axial electrical switching of a ferroelectric: theory versus experiment. Journal of the Mechanics and Physics of Solids, 49. pp. 785-811. ISSN 0022-5096

Fleck, NA (2001) Multi-axial strength of metallic foams and lattice materials. Journal of the JSMS: Materials Science for the 21st Century, A. pp. 336-340.

Deshpande, VS and Fleck, NA (2001) Multi-axial yield behaviour of polymer foams. Acta Materialia, 49. pp. 1859-1866. ISSN 1359-6454

Peerlings, RHJ and Fleck, NA (2001) Numerical analysis of strain gradient effects in periodic media. Journal de Physique IV, 11. pp. 154-160. ISSN 1155-4339

Chen, C and Harte, A-M and Fleck, NA (2001) Plastic collapse of sandwich beams with a metallic foam core. International Journal of Mechanical Sciences, 43. pp. 1483-1506. ISSN 0020-7403

Redanz, P and Fleck, NA (2001) The compaction of a random distribution of metal cylinders by the discrete element method. Acta Materialia, 49. pp. 4325-4335. ISSN 1359-6454

Fleck, NA and Olurin, OB (2001) The effect of hole size upon the strength of metallic and polymeric foams. Journal of the Mechanics and Physics of Solids, 49. pp. 2015-2030. ISSN 0022-5096

Fleck, NA and Olurin, OB and Chen, C and Ashby, MF (2001) The effect of hole size upon the strength of metallic and polymeric foams. Journal of the Mechanics and Physics of Solids, 49. pp. 2015-2030. ISSN 0022-5096

Harte, AM and Fleck, NA and Ashby, MF (2001) The fatigue strength of sandwich beams with an aluminium alloy foam core. International Journal of Fatigue, 23. pp. 499-507. ISSN 0142-1123

Chen, C and Fleck, NA and Lu, TJ (2001) The mode I crack growth resistance of metallic foams. Journal of the Mechanics and Physics of Solids, 49. pp. 231-259. ISSN 0022-5096

Chen, C and Harte, AM and Fleck, NA (2001) The plastic collapse of sandwich beams with a metallic foam core. International Journal of Mechanical Sciences, 43. pp. 1483-1506. ISSN 0020-7403

Fleck, NA and Hutchinson, JW (2001) A reformulation of strain gradient plasticity. Journal of the Mechanics and Physics of Solids, 49. pp. 2245-2271. ISSN 0022-5096

Shieh, J and Huber, JE and Fleck, NA and Ashby, MF (2001) The selection of sensors. Progress in Materials Science, 46. pp. 461-504. ISSN 0079-6425

Evans, AG and Hutchinson, JW and Fleck, NA and Ashby, MF and Wadley, HN (2001) The topological design of multifunctional cellular metals. Progress in Materials Science, 46. pp. 209-327. ISSN 0079-6425

Zhao, LG and Lu, TJ and Fleck, NA (2000) Crack channelling and spalling in a plate due to thermal shock loading. Journal of the Mechanics and Physics of Solids, 48. pp. 867-897. ISSN 0022-5096

Fleck, NA and Liu, D and Shu, JY (2000) Microbuckle initiation from a hole and from the free edge of a fibre composite. INT J SOLIDS STRUCT, 37. pp. 2757-2775. ISSN 0020-7683

Harte, AM and Fleck, NA (2000) Deformation and failure mechanisms of braided composite tubes in compression and torsion. Acta Materialia, 48. pp. 1259-1271. ISSN 1359-6454

Olurin, OB and Fleck, NA and Ashby, MF (2000) Deformation and fracture of aluminium foams. Materials Science and Engineering A, 291. pp. 136-146. ISSN 0921-5093

Harte, AM and Fleck, NA and Akisanya, AR (2000) Energy absorption of foam-filled circular tubes with braided composite walls. European Journal of Mechanics, Series A: Solids, 19. pp. 31-50. ISSN 0997-7538

Mesarovic, SD and Fleck, NA (2000) Frictionless indentation of dissimilar elastic-plastic spheres. International Journal of Solids and Structures, 37. pp. 7071-7091. ISSN 0020-7683

Deshpande, VS and Fleck, NA (2000) High strain rate compressive behaviour of aluminium alloy foams. International Journal of Impact Engineering, 24. pp. 277-298. ISSN 0734-743X

Olurin, OB and Ashby, MF and Fleck, NA (2000) Indentation resistance of an aluminium foam. Scripta Materialia, 43. pp. 983-989. ISSN 1359-6462

Deshpande, VS and Fleck, NA (2000) Isotropic constitutive models for metallic foams. Journal of the Mechanics and Physics of Solids, 48. pp. 1253-1283. ISSN 0022-5096

Olurin, OB and Fleck, NA and Ashby, MF (2000) Joining of aluminium foams with fasteners and adhesives. Journal of Materials Science, 35. pp. 1079-1086. ISSN 0022-2461

Olurin, OB and Fleck, NA and Ashby, MF (2000) Joining of metal foams with fasteners. Advanced Engineering Materials, 2. pp. 521-528. ISSN 1438-1656

Fleck, NA and Zhao, LG (2000) Microbuckle tunnelling in fibre composites. Journal of the Mechanics and Physics of Solids, 48. pp. 1865-1891. ISSN 0022-5096

Harte, AM and Fleck, NA and Ashby, MF (2000) Sandwich panel design using aluminum alloy foam. Journal of the Mechanics and Physics of Solids, 2. pp. 219-222. ISSN 1438-1656

Sridhar, I and Fleck, NA (2000) Yield behaviour of cold compacted composite powders. Acta Materialia, 48. pp. 3341-3352. ISSN 1359-6454

McCullough, KYG and Fleck, NA and Ashby, MF (2000) The stress-life fatigue behaviour of aluminium alloy foams. Fatigue and Fracture of Engineering Materials and Structures, 23. pp. 199-208. ISSN 8756-758X

Sugimura, Y and Rabiei, A and Evans, AG and Harte, AM and Fleck, NA (1999) Compression fatigue of a cellular Al alloy. MAT SCI ENG A-STRUCT, 269. pp. 38-48. ISSN 0921-5093

McCullough, KYG and Fleck, NA and Ashby, MF (1999) Toughness of aluminium alloy foams. Acta Materialia, 47. pp. 2331-2343. ISSN 1359-6454

Sugimura, Y and Rabiei, A and Evans, AG and Harte, AM and Fleck, NA (1999) Compression fatigue of a cellular Al alloy. Materials Science and Engineering A, 269. pp. 38-48. ISSN 0921-5093

Chen, C and Lu, TJ and Fleck, NA (1999) Effect of imperfections on the yielding of two-dimensional foams. Journal of the Mechanics and Physics of Solids, 47. pp. 2235-2272. ISSN 0022-5096

Harte, AM and Fleck, NA and Ashby, MF (1999) Fatigue failure of an open cell and a closed cell aluminium alloy foam. Acta Materialia, 47. pp. 2511-2524. ISSN 1359-6454

Shu, JY and King, WE and Fleck, NA (1999) Finite elements for materials with strain gradient effects. Journal of the Mechanics and Physics of Solids, 44. pp. 373-392. ISSN 0029-5981

Fleck, NA and Liu, D and Shu, JW (1999) Microbuckle initiation from a hole and from the free edge of a fibre composite. International Journal of Solids and Structures, 37. pp. 2757-2775. ISSN 0020-7683

Harte, AM and Fleck, NA (1999) On the mechanics of braided composites in tension. European Journal of Mechanics, Series A: Solids, 19. pp. 259-276. ISSN 0997-7538

Liu, D and Fleck, NA (1999) Scale effects in the initiation of cracking of a scarf joint. INT J FRACTURE, 95. pp. 67-88. ISSN 0376-9429

Liu, D and Fleck, NA (1999) Scale effects in the initiation of cracking of a scarf joints. International Journal of Fracture, 95. pp. 67-88. ISSN 0376-9429

Mesarovic, SD and Fleck, NA (1999) Spherical indentation of elastic-plastic solids. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 455. pp. 2707-2728. ISSN 1364-5021

Shu, JY and Fleck, NA (1999) Strain gradient crystal plasticity: size-dependent deformation of bicrystals. Journal of the Mechanics and Physics of Solids, 47. pp. 297-324. ISSN 0022-5096

McCullough, KYG and Fleck, NA and Ashby, MF (1999) Uniaxial stress-strain behaviour of aluminium alloy foams. Acta Materialia, 47. pp. 2323-2330. ISSN 1359-6454

Huber, JE and Fleck, NA and Landis, C and McMeeking, RM (1999) A constitutive model for ferroelectric polycrystals. Journal of the Mechanics and Physics of Solids, 47. pp. 1663-1697. ISSN 0022-5096

Huber, JE and McMeeking, RM and Fleck, NA (1999) A crystal plasticity model for ferroelectrics. Ferroelectrics, 228. pp. 39-52. ISSN 0015-0193

Storaakers, B and Fleck, NA and McMeeking, RM (1999) The viscoplastic compaction of composite powders. Journal of the Mechanics and Physics of Solids, 47. pp. 785-816. ISSN 0022-5096

Shu, JY and Fleck, NA (1998) The prediction of a size effect in micro-indentation. INT J SOLIDS STRUCT, 35. pp. 1363-1383. ISSN 0020-7683

Redanz, P and Fleck, NA and McMeeking, RM (1998) Failure of a porous solid from a deep notch. International Journal of Fracture, 88. pp. 187-203. ISSN 0376-9429

Budiansky, B and Fleck, NA and Amazigo, JC (1998) On kink-band propagation in fiber composites. Journal of the Mechanics and Physics of Solids, 46. pp. 1637-1654. ISSN 0022-5096

Shu, JY and Fleck, NA (1998) The prediction of a size effect in micro-indentation. International Journal of Solids and Structures, 35. pp. 1364-1384. ISSN 0020-7683

Hwang, SC and Huber, JE and McMeeking, RM and Fleck, NA (1998) The simulation of switching in polycrystalline ferroelectric ceramics. Journal of Applied Physics, 84. pp. 1530-1540. ISSN 0021-8979

Lu, TJ and Fleck, NA (1998) The thermal shock resistance of solids. Acta Materialia, 46. pp. 4755-4768. ISSN 1359-6454

Akisanya, AR and Cocks, ACF and Fleck, NA (1997) The yield behaviour of metal powders. INT J MECH SCI, 39. pp. 1315-1324. ISSN 0020-7403

Sridhar, I and Johnson, KL and Fleck, NA (1997) Adhesion mechanics of the surface force apparatus. Journal of Physics D: Applied Physics, 30. pp. 1710-1719. ISSN 0022-3727

Fleck, NA (1997) Compressive failure of fiber composites. ADV APPL MECH, 33. pp. 43-117. ISSN 0065-2156

Siegmund, T and Fleck, NA and Needleman, A (1997) Dynamic crack growth across an interface. International Journal of Fracture, 85. pp. 381-402. ISSN 0376-9429

Akisanya, AR and Fleck, NA (1997) Interfacial cracking from the free-edge of a long bi-material strip. International Journal of Solids and Structures, 34. pp. 1645-1666. ISSN 0020-7683

Shu, JY and Fleck, NA (1997) Microbuckle initiation in fibre composites under multiaxial loading. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 453. pp. 2063-2083. ISSN 1364-5021

Sivashanker, S and Fleck, NA and Sutcliffe, MPF (1997) Microbuckle propagation in fibre composites. Acta Materialia, 45. pp. 921-932. ISSN 1359-6454

Sutcliffe, MPF and Fleck, NA (1997) Microbuckle propagation in fibre composites. Acta Materialia, 45. pp. 921-932. ISSN 1359-6454

Durban, D and Fleck, NA (1997) Spherical cavity expansion in a Drucker-Prager solid. Transactions of the ASME: Journal of Applied Mechanics, 64. pp. 743-750. ISSN 0021-8936

Fleck, NA and Hutchinson, JW (1997) Strain gradient plasticity. ADV APPL MECH, 33. pp. 295-361. ISSN 0065-2156

Huber, JE and Fleck, NA and Ashby, MF (1997) The selection of mechanical actuators based on performance indices. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 453. pp. 2185-2205. ISSN 1364-5021

Huber, JE and Fleck, NA and Ashby, MF (1997) The selection of mechanical actuators based on performance indices. Proceedings - Royal Society of London A, 453. pp. 2185-2205. ISSN 1364-5021

Kang, KJ and Fleck, NA (1996) Analysis of the machining process of sintered bronze. KSME J, 10. pp. 314-320. ISSN 1011-8861

Poole, WJ and Ashby, MF and Fleck, NA (1996) Micro-hardness of annealed and work-hardened copper polycrystals. SCRIPTA MATER, 34. pp. 559-564. ISSN 1359-6462

Fleck, NA and Sutcliffe, MPF and Sivashankar, S and Xin, XJ (1996) Compressive R-curve of a carbon fibre-epoxy matrix composite. Composites Part B: Engineering, 27. pp. 531-542. ISSN 1359-8368

Fleck, NA and Sutcliffe, MPF (1996) Compressive R-curve of a carbon fibre-epoxy matrix composite. Composites Part B: Engineering, 27. pp. 531-542. ISSN 1359-8368

Shaw, MC and Clyne, TW and Cocks, ACF and Fleck, NA and Pateras, SK (1996) Cracking patterns in metal-ceramic laminates: effects of plasticity. Journal of the Mechanics and Physics of Solids, 44. pp. 801-822. ISSN 0022-5096

Slaughter, WS and Fan, J and Fleck, NA (1996) Dynamic compressive failure of fiber composites. Journal of the Mechanics and Physics of Solids, 44. pp. 1867-1890. ISSN 0022-5096

Sivashanker, S and Fleck, NA and Sutcliffe, MPF (1996) Microbuckle propagation in a unidirectional carbon fibre-epoxy matrix composite. Acta Materialia, 44. pp. 2581-2590. ISSN 1359-6454

Sutcliffe, MPF and Fleck, NA and Xin, XJ (1996) Prediction of compressive toughness for fibre composites. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 452. pp. 2443-2465. ISSN 1364-5021

Sutcliffe, MPF and Fleck, NA and Xin, XJ (1996) Prediction of compressive toughness for fibre composites. Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 452. pp. 2443-2465. ISSN 1364-5021

Fleck, NA and Kang, KJ and Williams, JA (1996) The machining of sintered bronze. International Journal of Mechanical Sciences, 38. pp. 141-155. ISSN 0020-7403

Smyshlyaev, VP and Fleck, NA (1996) The role of strain gradients in the grain size effect for polycrystals. Journal of the Mechanics and Physics of Solids, 44. pp. 465-495. ISSN 0022-5096

OGBONNA, N and FLECK, NA (1995) COMPACTION OF AN ARRAY OF SPHERICAL-PARTICLES. ACTA METALL MATER, 43. pp. 603-620. ISSN 0956-7151

Fleck, NA and Jelf, M and Curtis, PT (1995) Compressive failure of laminated and woven composites. Journal of Composites Technology and Research, 17. pp. 212-220. ISSN 0884-6804

Fleck, NA and Jelf, PM (1995) Deformation and failure of a carbon fibre composite under combined shear and transverse loading. Acta Metallurgica et Materialia, 43. pp. 3001-3007. ISSN 0956-7151

Clarke, AR and Archenhold, G and Davidson, N and Slaughter, WS and Fleck, NA (1995) Determining the power spectral density of the waviness of unidirectional glass fibres in polymer composites. Applied Composite Materials, 2. pp. 233-243. ISSN 0929-189X

Fleck, NA and Shu, JY (1995) Microbuckle initiation in fibre composites: a finite element study. Journal of the Mechanics and Physics of Solids, 43. pp. 1887-1918. ISSN 0022-5096

Fleck, NA (1995) On the cold compaction of powders. Journal of the Mechanics and Physics of Solids, 43. pp. 1409-1431. ISSN 0022-5096

Fleck, NA and Deng, L and Budiansky, B (1995) Prediction of kink width in compressed fiber composites. Transactions of the ASME: Journal of Applied Mechanics, 62. pp. 329-337. ISSN 0021-8936

Ogbonna, N and Fleck, NA and Cocks, ACF (1995) Transient creep analysis of ball indentation. Journal of Materials Science, 37. pp. 1179-1202. ISSN 0020-7403

Fleck, NA (1995) A crystal plasticity view of powder compaction. Acta Metallurgica et Materialia, 43. pp. 3177-3184. ISSN 0956-7151

Smyshlyaev, VP and Fleck, NA (1994) Bounds and estimates for linear composites with strain gradient effects. Journal of the Mechanics and Physics of Solids, 42. pp. 1851-1882. ISSN 0022-5096

Smyshlyaev, VP and Fleck, NA (1994) Bounds and estimates for the overall plastic behaviour of composites with strain gradient effects. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 451. pp. 795-810. ISSN 1364-5021

Bower, AF and Fleck, NA (1994) Brittle fracture under a sliding line contact. Journal of the Mechanics and Physics of Solids, 42. pp. 1375-1396. ISSN 0022-5096

Akisanya, AR and Cocks, ACF and Fleck, NA (1994) Hydrostatic compaction of cylindrical particles. Journal of the Mechanics and Physics of Solids, 42. pp. 1067-1085. ISSN 0022-5096

Sutcliffe, MPF and Fleck, NA (1994) Microbuckle propagation in carbon fibre-epoxy composites. Acta Metallurgica et Materialia, 42. pp. 2219-2231. ISSN 0956-7151

Slaughter, WS and Fleck, NA (1994) Microbuckling of fiber composites with random initial fiber waviness. Journal of the Mechanics and Physics of Solids, 42. pp. 1743-1766. ISSN 0022-5096

Fleck, NA and Kang, KJ and Ashby, MF (1994) Overview no. 112: The cyclic properties of engineering materials. Acta Metallurgica et Materialia, 42. pp. 365-381. ISSN 0956-7151

Fleck, NA and Muller, GM and Ashby, MF and Hutchinson, JW (1994) Strain gradient plasticity: Theory and experiment. Acta Metallurgica et Materialia, 42. pp. 475-487. ISSN 0956-7151

Slaughter, WS and Fleck, NA (1994) Viscoelastic microbuckling of fibre composites. Journal of Applied Mechanics, 60. pp. 802-806. ISSN 0021-8936

Cox, BN and Carter, WC and Fleck, NA (1994) A binary model of textile composites-I: formulation. Acta Metallurgica et Materialia, 42. pp. 3463-3479. ISSN 0956-7151

Fleck, NA and Khang, KJ and Ashby, MF (1994) The cyclic properties of engineering materials. Acta Metallurgica et Materialia, 42. pp. 365-381. ISSN 0956-7151

Akisanya, AR and Fleck, NA (1994) The edge cracking and decohesion of thin films. Journal of Materials Science, 31. pp. 3175-3199. ISSN 0020-7683

Jelf, PM and Fleck, NA (1994) The failure of composite tubes due to combined compression and torsion. Journal of Materials Science, 29. pp. 3080-3084. ISSN 0022-2461

SHARP, SJ and ASHBY, MF and FLECK, NA (1993) MATERIAL RESPONSE UNDER STATIC AND SLIDING INDENTATION LOADS. ACTA METALL MATER, 41. pp. 685-692. ISSN 0956-7151

DURBAN, D and FLECK, NA (1993) SINGULAR PLASTIC FIELDS IN STEADY PENETRATION OF A RIGID CONE - CLOSURE. J APPL MECH-T ASME, 60. p. 1062. ISSN 0021-8936

Wright, SC and Fleck, NA and Stronge, WJ (1993) Ballistic impact of polycarbonate—An experimental investigation. International Journal of Impact Engineering, 13. pp. 1-20. ISSN 0734-743X

Slaughter, WS and Fleck, NA and Budiansky, B (1993) Compressive failure of Fiber composites: the roles of multiaxial loading and creep. Transactions of the ASME: Journal of Engineering Materials and Technology, 115. pp. 308-313. ISSN 0094-4289

Fleck, NA and Budiansky, B (1993) Compressive failure of fibre composites. Journal of the Mechanics and Physics of Solids, 41. p.183-. ISSN 0022-5096

Budiansky, B and Fleck, NA (1993) Compressive failure of fibre composites. International Journal of Fracture, 41. pp. 183-211. ISSN 0376-9429

Soutis, C and Curtis, PT and Fleck, NA (1993) Compressive failure of notched carbon fibre composites. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 440. pp. 241-256. ISSN 1364-5021

Slaughter, WS and Fleck, NA (1993) Compressive fatigue of fibre composites. Journal of the Mechanics and Physics of Solids, 41. pp. 1265-1284. ISSN 0022-5096

Sutcliffe, MPF and Fleck, NA (1993) Effect of geometry on compressive failure of notched composites. International Journal of Fracture, 59. pp. 115-132. ISSN 0376-9429

Akisanya, AR and Fleck, NA (1993) Fatigue and creep of a constrained metal wire. Acta Metallurgica et Materialia, 41. pp. 121-131. ISSN 0956-7151

Bower, AF and Fleck, NA and Needleman, A and Ogbonna, N (1993) Indentation of a power law creeping solid. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 441. pp. 97-124. ISSN 1364-5021

Slaughter, WS and Fleck, NA (1993) Viscoelastic microbuckling of fiber composites. ASME Transactions, Journal of Applied Mechanics, 60. pp. 802-806. ISSN 0021-8936

Staughter, WS and Fleck, NA (1993) Viscoelastic microbuckling of fiber composites. American Society of Mechanical Engineers (Paper). pp. 1-5. ISSN 0402-1215

Fleck, NA and Hutchinson, JW (1993) A phenomenological theory for strain gradient effects in plasticity. Journal of the Mechanics and Physics of Solids, 41. pp. 1825-1857. ISSN 0022-5096

WRIGHT, SC and HUANG, Y and FLECK, NA (1992) DEEP PENETRATION OF POLYCARBONATE BY A CYLINDRICAL PUNCH. MECH MATER, 13. pp. 277-284. ISSN 0167-6636

Akisanya, AR and Fleck, NA (1992) Analysis of a wavy crack in sandwich specimens. International Journal of Fracture, 55. pp. 29-45. ISSN 0376-9429

Akisanya, AR and Fleck, NA (1992) Brittle fracture of adhesive joints. International Journal of Fracture, 58. pp. 93-114. ISSN 0376-9429

FLECK, NA and JOHNSON, KL and MEAR, ME and ZHANG, LC (1992) COLD-ROLLING OF FOIL. P I MECH ENG B-J ENG, 206. pp. 119-131. ISSN 0954-4054

JELF, PM and FLECK, NA (1992) COMPRESSION FAILURE MECHANISMS IN UNIDIRECTIONAL COMPOSITES. J COMPOS MATER, 26. pp. 2706-2726. ISSN 0021-9983

Fleck, NA and Johnson, KL and Mear, ME and Zhang, LC (1992) Cold rolling of foil. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 206. pp. 119-131. ISSN 0954-4054

Wright, SC and Huang, Y and Fleck, NA (1992) Deep penetration of polycarbonate by a cylindrical punch. Mechanics of Materials, 13. pp. 277-284. ISSN 0167-6636

Durban, D and Fleck, NA (1992) Singular plastic fields in steady penetration of a rigid cone. Journal of Applied Mechanics, 59. pp. 706-710. ISSN 0021-8936

Fleck, NA and Kuhn, LT and McMeeking, RM (1992) Yielding of metal powder bonded by isolated contacts. International Journal of Fracture, 40. pp. 1139-1162. ISSN 0376-9429

Fleck, NA (1991) Brittle fracture due to an array of microcracks. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 432. pp. 55-76. ISSN 0080-4630

SOUTIS, C and FLECK, NA and CURTIS, PT (1991) HOLE HOLE INTERACTION IN CARBON-FIBER EPOXY LAMINATES UNDER UNIAXIAL COMPRESSION. COMPOSITES, 22. pp. 31-38. ISSN 0010-4361

Soutis, C and Fleck, NA and Smith, PA (1991) Compression fatigue behaviour of notched carbon fibre-epoxy laminates. International Journal of Fatigue, 13. pp. 303-312. ISSN 0142-1123

Fleck, NA and Hutchinson, J and Suo, Z (1991) Crack path selection in a brittle adhesive layer. International Journal of Solids and Structures, 27. pp. 1683-1703. ISSN 0020-7683

Soutis, C and Fleck, NA and Smith, PA (1991) Failure prediction technique for compression loaded carbon fibre-epoxy laminate with open holes. Journal of Composite Materials, 25. pp. 1476-1498. ISSN 0021-9983

Fleck, NA and Otoyo, H and Needleman, A (1991) Indentation of porous solids. International Journal of Solids and Structures, 29. pp. 1613-1636. ISSN 0020-7683

Fleck, NA and Durban, D (1991) Steady penetration of a rigid cone with a rough wall into a power-law viscous solid. Journal of Applied Mechanics, 58. pp. 872-880. ISSN 0021-8936

Stronge, WA and Fleck, NA and Liu, JH (1990) High strain-rate shear response of Polycarbonate and Polymethyl Methacrylate. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 429. pp. 459-479. ISSN 0080-4630

Soutis, C and Fleck, NA (1990) Static compression failure of carbon fibre T800/924C composite plate with a single hole. Journal of Composite Materials, 24. pp. 536-558. ISSN 0021-9983

Shercliff, HR and Fleck, NA (1990) Effect of specimen geometry on fatigue crack growth in plane strain: I. constant amplitude response. Fatigue and Fracture of Engineering Materials and Structures, 13. pp. 287-296. ISSN 8756-758X

Shercliff, HR and Fleck, NA (1990) Effect of specimen geometry on fatigue crack growth in plane strain: II. overload response. Fatigue and Fracture of Engineering Materials and Structures, 13. pp. 297-310. ISSN 8756-758X

Anderson, PM and Fleck, NA and Johnson, KL (1990) Localisation of plastic deformation in shear due to microcracks. Journal of the Mechanics and Physics of Solids, 38. pp. 681-699. ISSN 0022-5096

Fleck, NA and Durban, D (1989) Asymptotic fields at tip of conical notches and inclusions in a power hardening solid. Journal of the Mechanics and Physics of Solids, 37. pp. 233-263. ISSN 0022-5096

FLECK, NA and WRIGHT, SC (1989) DEFORMATION AND FRACTURE OF POLYCARBONATE AT HIGH-STRAIN RATE. INST PHYS CONF SER. pp. 73-80. ISSN 0951-3248

Shin, S and Fleck, NA (1989) Fatigue and fracture of a zinc die casting alloy. International Journal of Fatigue, 11. pp. 341-346. ISSN 0142-1123

Fleck, NA and Hutchinson, JW and Tvergaard, V (1989) Softening by void nucleation and growth in tension and shear. Journal of the Mechanics and Physics of Solids, 37. pp. 515-540. ISSN 0022-5096

FLECK, NA and WRIGHT, SC and LIU, JH and STRONGE, WJ (1988) BALLISTIC PERFORATION OF POLYCARBONATE SHEET AND ITS HIGH-STRAIN RATE RESPONSE. J PHYS-PARIS, 49. pp. 145-149. ISSN 0302-0738

Shin, CS and Fleck, NA (1987) Overload retardation in a structural steel. Fatigue and Fracture of Engineering Materials and Structures, 9. pp. 379-393. ISSN 8756-758X

Fleck, NA and Johnson, KL (1987) Towards a new theory of cold rolling thin foil. International Journal of Mechanical Science, 29. pp. 507-524. ISSN 0020-7403

Fleck, NA (1986) FATIGUE CRACK GROWTH - THE COMPLICATIONS. pp. 75-88.

FLECK, NA (1986) FINITE-ELEMENT ANALYSIS OF PLASTICITY-INDUCED CRACK CLOSURE UNDER PLANE-STRAIN CONDITIONS. ENG FRACT MECH, 25. pp. 441-449. ISSN 0013-7944

Fleck, NA (1986) Finite element analysis of plasticity-induced crack closure under plane strain conditions. Engineering Fracture Mechanics, 25. pp. 441-449. ISSN 0013-7944

Fleck, NA and Hutchinson, JW (1986) Void growth in shear. Proceedings of the Royal Society of London A: Mathematical and Physical Sciences, 407. pp. 435-458. ISSN 0080-4630

Fleck, NA (1985) Fatigue crack growth due to periodic underloads and overloads. Acta Metallurgica, 33. pp. 1339-1354. ISSN 0001-6160

Fleck, NA and Shin, S and Smith, RA (1985) Fatigue crack growth under compressive loading. Engineering Fracture Mechanics, 21. pp. 173-185. ISSN 0013-7944

Fleck, NA and Smith, RA (1984) DISCUSSION OF MECHANISMS OF ACCELERATED AND RETARDED FATIGUE CRACK GROWTH. pp. 1823-1829.

Fleck, NA and Smith, RA (1984) Fatigue life prediction of a structural steel under service loading. International Journal of Fatigue, 6. pp. 203-210. ISSN 0142-1123

Fleck, NA and Smith, IFC and Smith, RA (1983) Closure behaviour of surface cracks. Fatigue of Engineering Materials and Structures, 6. p.225-. ISSN 8756-758X

Fleck, NA (1983) Some aspects of clip gauge design. Strain, 19. pp. 17-26. ISSN 0039-2103

Fleck, NA and Smith, RA (1982) Crack closure - is it just a surface phenomenon? International Journal of Fatigue, 4. pp. 157-160. ISSN 0142-1123

Fleck, NA and Smith, RA (1981) Effect of density on tensile strength, fracture toughness, and fatigue crack propagation behaviour of sintered steel. Powder Metallurgy, 3. pp. 121-125. ISSN 0032-5899

Fleck, NA and Smith, RA (1981) Use of simple models to estimate the effect of density on fracture behaviour of sintered steel. Powder Metallurgy, 3. pp. 126-130. ISSN 0032-5899

Book

Fleck, Norman Andrew, ed. (2003) Proceedings of the International Conference on Cellular Metals: Manufacturing, Properties, Applications (MetFoam'03). MIT-Verlag, Breman, Germany.

Fleck, Norman Andrew, ed. (2001) Proceedings of the International Conference on Cellular Metals and Metal Foaming Technology (MetFoam'01). MIT-Verlag, Breman, Germany.

Ashby, MF and Evans, AG and Fleck, NA and Gibson, LJ and Hutchinson, JW and Wadley, HNG (2000) Metal Foams: A Design Guide. Butterworth-Heinemann.

Ashby, MF and Evans, AG and Fleck, NA and Hutchinson, JW and Gibson, LJ and Wadley, H (2000) Metal foams - a design guide. Butterworth-Heinemann, Oxford, UK.

Fleck, Norman Andrew, ed. (1999) Proceedings of the 1st international conference on metal foams and porous metal structures (MetFoam'99). MIT-Verlag, Breman, MIT, -.

Book Section

Garton, DA and Khang, KJ and Fleck, NA and Ashby, MF (1993) Materials selection for minimum weight fatigue design. In: Theoretical Concepts and Numerical Analysis of Fatigue. Engineering Materials Advisory Services Ltd, Warley, UK, pp. 359-376. ISBN 0947817573

Conference or Workshop Item

St-Pierre, L and Fleck, NA and Deshpande, VS (2012) Sandwich Beams With Corrugated and Y-frame Cores: Does the Back Face Contribute to the Bending Response? In: UNSPECIFIED -..

Quintana-Alonso, I and Fleck, NA (2010) Damage Tolerance of a Sandwich Panel Containing a Cracked Square Lattice Core. In: UNSPECIFIED pp. 139-158..

Comley, K and Fleck, NA (2009) The High Strain Rate Response of Adipose Tissue. In: UNSPECIFIED pp. 27-33..

Phani, AS and Fleck, NA (2008) Elastic boundary layers in two-dimensional isotropic lattices. In: UNSPECIFIED pp. 495-504..

Zhu, H and Chu, DP and Fleck, NA and Pane, I and Natori, E (2007) Polarization change of PZTN ferroelectric thin film capacitors under tensile stress. In: 19th International Symposium on Integrated Ferroelectrics (ISIF), -5-2007 to --, Bordeaux, France.

Luo, JK and Fu, Y-Q and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2006) Normally closed microgrippers based on diamond-like carbon structures. In: International symposium on Diamond and Other New Carbon Materials, -6-2006 to --, Acireale, Sicily pp. 133-141..

Suiker, ASJ and Fleck, NA (2005) Failure mechanics in brittle laminates. In: 11th International Conference on Fracture, 20-3-2005 to 25-3-2005, Turin, Italy pp. 336-340..

Fleck, NA (2005) The resistance of metallic sandwich beams with lattice cores to under-water shock loading. In: 4th Australasian Congress on Applied Mechanics (ACAM 2005), 16-2-2005 to 18-2-2005, Melbourne, Australia.

Luo, JK and Fu, YQ and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2005) Large displacement spring-like electro-mechanical thermal actuators with insulator constraint beams. In: UNSPECIFIED pp. 67-77..

Milne, WI and Luo, JK and Huang, R and He, JH and Fu, YQ and Flewitt, AJ and Spearing, SM and Fleck, NA (2005) Normally closed microgrippers based on diamond-like carbon/Ni bimorph and diamond-like carbon/metal/polymer trimorph structures. In: UNSPECIFIED pp. 1981-1984..

Luo, JK and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2004) Modelling of microspring thermal actuator. In: NSTI Nanotechnology Conference and Trade Show - Nanotech 2004; Vol. 1, 7-3-2004 to 11-3-2004, Boston, MA, US pp. 355-358..

Fleck, NA (2004) An overview of the mechanical properties of foams and periodic lattice materials. In: International Conference on Fracture, -10-2004 to --, Germany.

Luo, JK and He, JH and Flewitt, AJ and Spearing, SM and Fleck, NA and Milne, WI (2004) Microgripper using a diamond like carbon/metal bilayer. In: UNSPECIFIED pp. 283-286..

Tagarielli, VL and Fleck, NA and Deshpande, VS (2003) The collapse response of sandwich beams with aluminium face sheets and a metal foam core in three-point bending. In: 3rd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2003), 23-6-2003 to 25-6-2003, Berlin, Germany pp. 381-386..

Deshpande, VS and Fleck, NA (2003) Blast resistance of sandwich beams. In: The 6th International Conference on International Conference on Sandwich Structures, -4-2003 to --, Fort Lauderdale, FL, US pp. 724-731..

Hutchinson, RG and Wicks, N and Evans, AG and Fleck, NA and Hutchinson, JW (2003) Kagorne plate structures for actuation. In: UNSPECIFIED pp. 6969-6980..

Fleck, NA and Tagarielli, V and Radford, D and Symons, DD (2003) Dynamic loading of composite sandwich beams. In: ASME International Mechanical Engineering Congress, 15-11-2003 to 21-11-2003, Washington, DC, US.

Shergold, OA and Fleck, NA (2003) A mechanics model of skin penetration. In: ASME International Mechanical Engineering Congress and Exposition IMECE'03, 16-11-2003 to 21-11-2003, Washington, DC, US pp. 309-310..

Huber, JE and Shieh, J and Fleck, NA (2002) Multiaxial response of hard and soft ferroelectrics under stress and electric field. In: The SPIE International Conference on Active Materials: Behavior and Mechanics, -3-2002 to --, San Diego, CA, US pp. 133-142..

Shieh, J and Fleck, NA and Huber, JE (2002) Observation of fatigue crack growth in ferroelectrics under electrical loading. In: The SPIE International Conference on Active Materials: Behavior and Mechanics, -3-2002 to --, San Diego, CA, US pp. 51-63..

Zupan, M and Fleck, NA and Ashby, MF (2002) The collapse and energy absorption of egg-box panels. In: TMS Annual Meeting and Exhibition, 17-2-2002 to 21-2-2002, Seattle, WA, US pp. 243-250..

Peerlings, RHJ and Fleck, NA (2001) Numerical analysis of strain gradient effects in periodic media. In: UNSPECIFIED pp. 153-160..

Peerlings, RHJ and Fleck, NA (2001) Enriched effective modelling of elastic periodic composites. In: ECCM 2001: European Conference on Computational Mechanics, 26-6-2001 to 29-6-2001, Cracow, Poland pp. 336-340..

Chen, C and Fleck, NA and Ashby, MF (2001) Numerical predictions of the creep response of sandwich beams with a metallic foam core. In: Metfoam 2001: The International Conference on Cellular Metals and Metal Foaming Technology, -6-2001 to --, Bremen, Germany pp. 369-374..

Fleck, NA and Chen, C and Ashby, MF (2001) Size effects in the fracture of metallic foams. In: Metfoam 2001: The International Conference on Cellular Metals and Metal Foaming Technology, -6-2001 to --, Bremen, Germany pp. 293-298..

Schmidt, I and Fleck, NA (2001) Crack growth resistance of metal foams. In: 10th International Conference on Fracture, 3-12-2001 to 7-12-2001, Honolulu, Hawaii pp. 336-340..

Redanz, P and Fleck, NA (2001) Discrete element modelling of compaction of cylindrical powder particles. In: UNSPECIFIED pp. 293-298..

Fleck, NA (2000) Micromechanisms of compressive failure in composites. In: The 3rd Nordic Meeting on Materials and Mechanics, 8-5-2000 to 11-5-2000, Aalborg, Denmark.

Huber, JE and Fleck, NA (2000) Multiaxial models and experiments with ferroelectrics. In: The SPIE International Conference on Active Materials: Behavior and Mechanics, -3-2000 to --, Newport Beach, CA, US pp. 288-295..

Steeves, CA and Fleck, NA (2000) Failure modes in sandwich beams with composite face-sheets and PVC foam cores. In: The International Symposium on the Mechanics of Sandwich Structures, -11-2000 to --, Orlando, FL, US pp. 21-28..

Schmidt, I and Fleck, NA (2000) Ductile fracture of honeycombs. In: UNSPECIFIED S497-S498..

Steeves, CA and Fleck, NA (1999) In-plane properties of CFRP laminates containing through-thickness reinforcing rods (Z-pins). In: The 12th International Conference on Composite Materials (ICCM-12), 5-7-1999 to 9-7-1999, Paris, France.

Maine, EMA and Ashby, MF (1999) Cost estimation and the viability of metal foams. In: International Conference on Metal Foams and Porous Metal Structures, 14-6-1999 to 16-6-1999, Bremen, Germany pp. 63-70..

Olurin, OB and Fleck, NA and Ashby, MF (1999) Fatigue of an aluminium alloy foam. In: The 1st International Conference on Metal Foams and Porous Metal Structures (MetFoam'99), 14-6-1999 to 16-6-1999, Bremen, Germany pp. 365-372..

Schmidt, I and Fleck, NA (1999) Fracture toughness of honeycombs. In: The 1st International Conference on Metal Foams and Porous Metal Structures (MetFoam'99), 14-6-1999 to 16-6-1999, Bremen, Germany pp. 387-390..

Deshpande, VS and Fleck, NA (1999) Multi-axial yield of aluminium alloy foams. In: The 1st International Conference on Metal Foams and Porous Metal Structures (MetFoam'99), 14-6-1999 to 16-6-1999, Bremen, Germany pp. 247-254..

Harte, A-M and Fleck, NA and Ashby, MF (1999) Sandwich panel design using aluminium alloy foam. In: The 1st International Conference on Metal Foams and Porous Metal Structures (MetFoam'99), 14-6-1999 to 16-6-1999, Bremen, Germany pp. 307-312..

Fleck, NA and Steeves, CA (1999) Z-pinned composite laminates: knockdown in compressive strength. In: The 5th International Conference on the Deformation and Fracture of Composites, -3-1999 to --, London, UK pp. 60-68..

Huber, JE and Fleck, NA and McMeeking, RM (1999) A crystal plasticity model for ferroelectrics. In: UNSPECIFIED pp. 39-52..

Fleck, NA and Hutchinson, JW (1998) A discussion of strain gradient plasticity theories and application to shear bands. In: The International Symposium on Material Instabilities in Solids, -6-1997 to --, Delft, Netherlands pp. 507-520..

Fleck, NA and Storakers, B and McMeeking, RM (1997) The viscoplastic compaction of powders. In: UNSPECIFIED pp. 1-10..

Bolton, MD and McKinley, J (1996) Clastic mechanics. In: IUTAM Symposium on Mechanics of Granular and Porous Materials, 15-7-1996 to 17-7-1996, Cambridge, UK pp. 35-46..

Fleck, NA and Storakers, B and McMeeking, RM (1996) Proceedings of the IUTAM Symposium on Mechanics of Granular and Porous Materials. In: The International Symposium on the Microstructure-Property Interactions in Composite Materials, -7-1996 to --, Cambridge, UK pp. 1-10..

Shaw, MC and Clyne, TW and Cocks, ACF and Fleck, NA and Pateras, SK (1996) Cracking patterns in metal-ceramic laminates: Effects of plasticity. In: UNSPECIFIED 801-&..

Shu, JY and Fleck, NA and King, WE (1996) Bicrystals with strain gradient effects. In: The MRS International Symposium on Interfacial Engineering for Optimized Properties, -12-1996 to --, Boston, MA, US pp. 295-300..

Fleck, NA (1994) Development of anisotropy in powder compaction. In: The International Symposium on the Microstructure-Property Interactions in Composite Materials, -8-1994 to --, Aalborg, Denmark pp. 101-112..

Akisanya, AR and Cocks, ACF and Fleck, NA (1994) The role of contact-contact interaction in the densification of powders. In: The Powder Metallurgy World Congress (PM'94), -6-1994 to --, Paris, France pp. 757-760..

Slaughter, WS and Fleck, NA (1993) Microbuckling of fibre composites. In: The 1st ASME Joint Mechanics Meeting on the Mechanics of Thick Composites, -6-1993 to --, Charlottesville, VA, US 67-..

Sutcliffe, MPF and Fleck, NA (1992) Compressive failure of notched carbon fibre-epoxy laminates. In: European Conference on Composites Testing and Standardisation, -9-1992 to --, Amsterdam, Netherlands pp. 123-132..

Garton, DA and Kang, KJ and Fleck, NA and Ashby, MF (1992) Materials selection for minimum weight fatigue design. In: The EMAS Conference on Theoretical Concepts and Numerical Analysis of Fatigue, 25-5-1992 to 27-5-1992, Birmingham, UK.

Akisanya, AR and Fleck, NA (1992) Compressive failure mechanisms in composites. In: The 17th Annual Mechanics of Composites Review, 27-10-1992 to 28-10-1992, Wright-Patterson Air Force Base, OH, US pp. 48-57..

Soutis, C and Fleck, NA (1991) Notch sensitivity of composite laminates loaded in compression. In: Applied Solid Mechanics 4: the 4th Conference on Applied Solid Mechanics, Leicester, 3-5 April 1991, 3-4-1991 to 5-4-1991 pp. 101-115..

Soutis, C and Fleck, NA (1990) Compressive fatigue damage in T800/924C carbon fibre-epoxy laminates with an open hole. In: Developments in the Science and Technology of Composite Materials: the 4th European Conference on Composite Materials (ECCM-4), Stuttgart, Germany, 25-28 September 1990, 25-9-1990 to 28-9-1990 pp. 221-228..

Jelf, M and Soutis, C and Fleck, NA (1990) Notched compression failure of carbon-fibre PEEK laminates. In: The 3rd International Conference on Advanced Composites in Emerging Technologies, Patras, Greece, 20-24 August 1990, 20-8-1990 to 24-8-1990, Patras, Greece pp. 204-215..

Fleck, NA and Wright, SC and Harding, J (1989) Deformation and fracture of polycarbonate at high strain rate. In: The 4th International Conference on the Mechanical Properties of Materials at High Rates of Strain, Oxford, UK, 19-22 March 1989, 19-3-1989 to 22-3-1989 pp. 73-80..

Soutis, C and Smith, PA and Fleck, NA (1988) Investigation of the compressive strength of carbon fibre reinforced plastics. In: The International Conference on Phase Interactions in Composite Materials, 22-8-1988 to 27-8-1988, Patras, Greece pp. 327-344..

Fleck, NA (1988) Creep fracture under remote shear. In: The 239th European Mechanics Colloquium on the Mechanics of Creep Brittle Materials, 15-8-1988 to 17-8-1988, Leicester, UK pp. 290-309..

Fleck, NA and Wright, SC and Liu, JH and Stronge, WJ (1988) Penetration response of polycarbonate plates. In: The 7th International Conference on Deformation, Yield and Fracture of Polymers, 11-4-1988 to 14-4-1988, Cambridge, UK 24/1-24/4..

Fleck, NA and Newman, JC (1986) Analysis of crack closure under plane strain conditions. In: The International Symposium on the Mechanics of Fatigue Crack Closure, -- to --.

Fleck, NA (1984) Fatigue crack growth - the complications. In: The Conference on Fatigue Crack Growth : 30 Years of Progress, -9-1984 to --, Cambridge, UK -..

Fleck, NA (1984) Influence of stress state of crack growth retardation. In: Basic Questions in Fatigue : the International Symposium on Fundamental Questions and Critical Experiments on Fatigue, -10-1984 to --, Dallas, TX, US pp. 157-183..

Fleck, NA and Smith, RA (1983) Accelerated fatigue crack growth in a low strength steel. In: SEECO'83: The International Conference on Digital Techniques in Fatigue, -3-1983 to --, Cambridge, UK pp. 190-196..

Fleck, NA and Hooley, T (1983) Development of low cost computer control. In: SEECO'83: The International Conference on Digital Techniques in Fatigue, -3-1983 to --, Cambridge, MA, US pp. 309-316..

Monograph

Tagarielli, VL and Fleck, NA (2003) Transverse loading of sandwich structures. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Chen, C and Deshpande, VS and Fleck, NA (2003) A constitutive model for a transversely isotropic compressible solid: user manual for a UMAT in ABAQUS. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Bell, DJ and Lu, TJ and Fleck, NA and Spearing, SM (2003) The selection of MEMS actuators and sensors. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Zupan, MP and Ashby, MF and Fleck, NA (2002) Actuator classification and selection: the development of a database. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Deshpande, VS and Fleck, NA (2002) Energy absorption of an egg-box material. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Steeves, CA and Fleck, NA (2002) Minimum weight design for the strength of sandwich panels with composite face-sheets and a polymer foam core. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Davey, CA and Fleck, NA and Bolton, MD (2002) The collapse behaviour of a sugar aggregate. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Sutcliffe, MPF and Xin, XJ and Fleck, NA and Curtis, PT (2000) Composite compressive strength modeller, version 1.4. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Deshpande, VS and Ashby, MF and Fleck, NA (2000) Foam topology: bending versus stretching dominated architectures. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Chen, C and Fleck, NA (2000) A creep model for polymeric foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shieh, J and Huber, JE and Fleck, NA and Ashby, MF (2000) The selection of sensors. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Chen, C and Lu, TJ and Fleck, NA (1999) Effect of inclusions and holes on the stiffness and strength of 2D cellular solids. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Olurin, OB and Fleck, NA and Ashby, MF (1999) Joining of aluminium foams with fasteners. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Olurin, OB and Fleck, NA and Ashby, MF (1999) Joining of aluminium foams with fasteners and adhesives. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

McCullough, KYG and Fleck, NA and Ashby, MF (1999) Toughness of aluminium alloy foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Liu, D and Fleck, NA (1999) User's manual II for finite element code FLASH for fibre microbuckling. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Zhao, LG and Lu, TJ and Fleck, NA (1999) The channelling and spalling of cracks under cold shock. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Chen, C and Fleck, NA and Lu, TJ (1999) The mode I crack growth resistance of metallic foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

McCullough, KYG and Fleck, NA and Ashby, MF (1999) The stress-life fatigue behaviour of aluminium alloy foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Chen, C and Lu, TJ and Fleck, NA (1998) Effect of imperfections on the yielding of two-dimensional foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Harte, AM and Fleck, NA and Ashby, MF (1998) Fatigue failure of an open cell and a closed cell aluminium alloy foam. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Deshpande, VS and Fleck, NA (1998) High strain rate compressive behaviour of aluminium alloy foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Deshpande, VS and Fleck, NA (1998) Isotropic constitutive models for metallic foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

McCullough, KYG and Fleck, NA and Ashby, MF (1998) Uniaxial stress-strain behaviour of aluminium alloy foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Lu, TJ and Fleck, NA (1998) The thermal shock resistance of solids. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Murphy, AM and Ashby, MF and Fleck, NA (1997) Metallography and image analysis of metallic foams. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Xin, XJ and Sutcliffe, MPF and Fleck, NA and Curtis, PT (1995) Cambridge Composite Designer: a users' manual. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Fleck, NA and Curtis, PT (1995) Development of a design package for compressive failure of polymer composites. Technical Report. Defence Research Agency (DRA), Farnborough, UK.

Shu, JY and Fleck, NA (1995) User's manual for finite element code for fibre microbuckling. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Akisanya, AR and Fleck, NA (1994) The decohesion of thin films on brittle substrates. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Fleck, NA and Kang, KJ and Ashby, MF (1993) The cyclic properties of engineering materials. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kang, KJ and Garton, D and Fleck, NA (1992) Compilation of fatigue design data. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Soutis, C and Fleck, NA (1990) Investigation of the static and fatigue compressive behaviour of carbon fibre composite laminates. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Soutis, C and Fleck, NA (1990) Software package for prediction of compression strength of notched composite panel. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Fleck, NA (1989) The effect of geometry on fatigue crack growth in plane strain. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Fleck, NA and Newman, JC (1986) Analysis of crack closure under plane strain conditions. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Fleck, NA (1986) Finite element analysis of plasticity-induced crack closure under plane strain conditions. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Thesis

Fleck, NA (1984) An investigation of fatigue crack closure. PhD thesis, UNSPECIFIED.

This list was generated on Wed Jan 16 20:43:53 2013 GMT.