Article

Sekine, H and Beaumont, PWR (2010) Micromechanically derived lowest threshold stress intensity factor for macroscopic stress-corrosion cracking in unidirectional GFRP composites. Journal of Materials Science, 45. pp. 5988-5992. ISSN 0022-2461

Beaumont, PWR (2006) Cracking models: broken parts. Applied Composite Materials, 13. pp. 265-285. ISSN 0929-189X

Beaumont, PWR (2006) Cracking models; broken parts. Applied Composite Materials, 13. pp. 265-285. ISSN 0929-189X

Beaumont, PWR and Dimant, RA and Shercliff, HR (2006) Failure processes in composite materials: getting physical. Journal of Materials Science, 41. pp. 6526-6546. ISSN 0022-2461

Sekine, H and Beaumont, PWR (2006) Micro-mechanical theory of macroscopic stress-corrosion cracking in unidirectional GFRP. Journal of Materials Science, 41. pp. 4604-4610. ISSN 0022-2461

Beaumont, PWR (2006) Pushing the performance limit of composite structures. Part 1: Modelling. Reinforced Plastics, 50. pp. 58-63. ISSN 0034-3617

Beaumont, PWR (2006) Pushing the performance limit of composite structures. Part 2: Cracking models. Reinforced Plastics, 50. pp. 30-36. ISSN 0034-3617

Singleton, ACN and Baillie, CA and Beaumont, PWR and Peijs, T (2003) On the mechanical properties, deformation and fracture of a natural fibre/recycled polymer composite. Composites Part B: Engineering, 34. pp. 519-526. ISSN 1359-8368

Dimant, RA and Shercliff, HR and Beaumont, PWR (2002) Evaluation of a damage-mechanics approach to the modelling of notched strength in KFRP and GRP cross-ply laminates. Composites Science and Technology, 62. pp. 255-263. ISSN 0266-3538

Dimant, RA and Shercliff, HR and Beaumont, PWR (2002) Evaluation of a damage-mechanics approach to the modelling of notched strength in KFRP and GRP cross-ply laminates. Composites Science and Technology, 62. pp. 255-263. ISSN 0266-3538

Sato, M and Yokobori, AB and Ozawa, Y and Kamiyama, T and Miyanaga, T and Beaumont, PWR and Sekine, H (2002) Experimental study of repair efficiency for single-sided composite patches bonded to aircraft structural panels. Advanced Composite Materials, 11. pp. 51-59. ISSN 0924-3046

Sekine, H and Beaumont, PWR (2000) On a simple power law for macroscopic crack propagation rate due to stress-corrosion cracking in unidirectional GFRP composites. Materials Science and Engineering A, 285. pp. 298-302. ISSN 0921-5093

Sekine, H and Beaumont, PWR (2000) Physical modelling of engineering problems of composites and structures. Applied Composite Materials, 7. pp. 13-37. ISSN 0929-189X

Spearing, SM and Beaumont, PWR (1998) Towards a predictive design methodology based on the physical modelling of the fracture of fiber composites. Applied Composite Materials, 5. pp. 69-94. ISSN 0929-189X

Sekine, H and Beaumont, PWR (1998) A physically based micromechanical theory of macroscopic stress-corrosion cracking in aligned continuous glass-fibre-reinforced polymer laminates. Composites Science and Technology, 58. pp. 1659-1665. ISSN 0266-3538

Cowley, KD and Beaumont, PWR (1997) Damage accumulation at notches and the fracture stress of carbon-fibre/polymer composites: Combined effects of stress and temperature (part 1). Composites Science and Technology, 57. pp. 1211-1219. ISSN 0266-3538

Cowley, KD and Beaumont, PWR (1997) Modelling problems of damage at notches and the fracture stress of carbon-fibre/polymer composites: Matrix, temperature and residual stress effects (part 2). Composites Science and Technology, 57. pp. 1309-1329. ISSN 0266-3538

Cowley, KD and Beaumont, PWR (1997) The interlaminar and intralaminar fracture toughness of carbon-fibre/polymer composites: The effect of temperature (part 2). Composites Science and Technology, 57. pp. 1433-1444. ISSN 0266-3538

Cowley, KD and Beaumont, PWR (1997) The measurement and prediction of residual stresses in carbon-fibre/polymer composites (part 4). Composites Science and Technology, 57. pp. 1445-1455. ISSN 0266-3538

Beaumont, PWR (1996) Opportunities for innovation in design: the way forward. Applied Composite Materials, 3. pp. 1-2. ISSN 0929-189X

Shercliff, HR and Vekinis, G and Beaumont, PWR (1994) Direct observation of fracture of CAS-Glass/SiC composites: Part I - Delamination. Journal of Materials Science, 29. pp. 3643-3652. ISSN 0022-2461

Shercliff, HR and Vekinis, G and Beaumont, PWR (1994) Direct observation of the fracture of CAS-Glass/SiC composites: Part I - Delamination. Journal of Materials Science, 29. pp. 3643-3652. ISSN 0022-2461

Vekinis, G and Ashby, MF and Beaumont, PWR (1993) Plaster of Paris as a model material for brittle porous solids. Journal of Materials Science, 28. pp. 3221-3227. ISSN 0022-2461

Vekinis, G and Ashby, MF and Shercliff, HR and Beaumont, PWR (1993) The micromechanisms of fracture of alumina and a ceramic-based fibre composite: Modelling the failure processes. Composites Science and Technology, 48. 325-. ISSN 0266-3538

Spearing, SM and Beaumont, PWR (1992) Fatigue damage mechanics of composite materials Part III: Prediction of post-fatigue strength. Composites Science and Technology, 44. pp. 299-307. ISSN 0266-3538

Spearing, SM and Beaumont, PWR (1992) Fatigue damage mechanics of composite materials Part IV: Prediction of post-fatigue stiffness. Composites Science and Technology, 44. pp. 309-317. ISSN 0266-3538

Spearing, SM and Beaumont, PWR (1992) Fatigue damage mechanics of composite materials. I: Experimental measurement of damage and post-fatigue properties. Composites Science and Technology, 44. pp. 159-168. ISSN 0266-3538

Spearing, SM and Beaumont, PWR (1992) Fatigue damage mechanics of composite materials. II: A damage growth model. Composites Science and Technology, 44. pp. 169-177. ISSN 0266-3538

Spearing, SM and Beaumont, PWR and Kortschot, MT (1992) The fatigue damage mechanics of notched carbon fibre/PEEK laminates. Composites, 23. pp. 305-311. ISSN 0010-4361

Beaumont, PWR and Spearing, SM and Kortschot, MT and Ashby, MF (1992) The physical modelling of damage in carbon fibre laminates. Advanced Composites Letters, 1. pp. 19-22. ISSN 0963-6935

Kedward, KT and Beaumont, PWR (1992) The treatment of fatigue and damage accumulation in composite design. International Journal of Fatigue, 14. pp. 283-294. ISSN 0142-1123

Kortschot, MT and Beaumont, PWR (1991) Damage mechanics of composite materials. III: Prediction of damage growth and notched strength. Composites Science and Technology, 40. pp. 147-165. ISSN 0266-3538

Kortschot, MT and Beaumont, PWR (1991) Damage mechanics of composite materials. IV: The effect of lay-up on damage growth and notched strength. Composites Science and Technology, 40. pp. 167-169. ISSN 0266-3538

Vekinis, G and Beaumont, PWR and Pritchard, G and Wainwright, R (1991) Dynamic observation of fracture in particulate-filled epoxy resins reinforced with rubber. Journal of Materials Science, 26. pp. 4527-4533. ISSN 0022-2461

Vekinis, G and Shercliff, HR and Beaumont, PWR (1991) Dynamic testing of ceramics and ceramic composites in the SEM. Metals and Materials, 7. pp. 279-284. ISSN 0026-0940

Vekinis, G and Ashby, MF and Beaumont, PWR (1991) The compressive failure of alumina containing controlled distributions of flaws. Acta Metallurgica et Materialia, 39. pp. 2583-2588. ISSN 0956-7151

Kortschot, MT and Beaumont, PWR (1990) Damage mechanics of composite materials: II — a damaged-based notched strength model. Composites Science and Technology, 39. pp. 303-326. ISSN 0266-3538

Kortschot, MT and Beaumont, PWR (1990) Damage mechanics of composite materials: I— Measurements of damage and strength. Composites Science and Technology, 39. pp. 289-290. ISSN 0266-3538

Vekinis, G and Ashby, MF and Beaumont, PWR (1990) R-Curve behaviour of Alumina ceramics. Acta Metallurgica et Materialia, 38. pp. 1151-1162. ISSN 1359-6454

Ganczakowski, HL and Ashby, MF and Beaumont, PWR and Smith, PA (1990) The behaviour of Kevlar fibre-epoxy laminates under static and fatigue loading—Part 2: Modelling. Composites Science and Technology, 37. pp. 371-392. ISSN 0266-3538

Ganczakowski, HL and Beaumont, PWR (1989) The behaviour of Kevlar fibre-epoxy laminates under static and fatigue loadings. Part I—experimental. Composites Science and Technology, 36. pp. 299-319. ISSN 0266-3538

Beaumont, PWR (1989) The failure of fibre composites: an overview. Journal of Strain Analysis, 24. pp. 189-205. ISSN 0309-3247

Wells, JK and Beaumont, PWR (1987) The prediction of R-curves and notched tensile strength for composite laminates. Journal of Materials Science, 22. pp. 1457-1468. ISSN 0022-2461

Gilbert, DG and Ashby, MF and Beaumont, PWR (1986) Modulus-maps for amorphous polymers. Journal of Materials Science, 21. pp. 3194-3210. ISSN 0022-2461

Brown, DJ and Windle, AH and Gilbert, DG and Beaumont, PWR (1986) Dynamic studies of peel failure in metallized polyester films. Journal of Materials Science, 21. pp. 314-320. ISSN 0022-2461

Evans, AG and Ahmad, ZB and Gilbert, DG and Beaumont, PWR (1986) Mechanisms of toughening in rubber toughened polymers. Acta Metallurgica, 34. pp. 79-87. ISSN 0001-6160

Ahmed, ZB and Ashby, MF and Beaumont, PWR (1986) The contribution of particle-stretching to the fracture toughness of rubber modified polymers. Scripta Metallurgica, 20. pp. 843-848. ISSN 1359-6462

Poursartip, A and Ashby, MF and Beaumont, PWR (1986) The fatigue damage mechanics of a carbon fibre composite laminate: I — development of the model. Composites Science and Technology, 25. pp. 193-218. ISSN 0266-3538

Poursartip, A and Beaumont, PWR (1986) The fatigue damage mechanics of a carbon fibre composite laminate: II — life prediction. Composites Science and Technology, 25. pp. 283-299. ISSN 0266-3538

Evans, AG and Williams, S and Beaumont, PWR (1985) On the toughness of particulate filled polymers. Journal of Materials Science, 20. pp. 3668-3674. ISSN 0022-2461

Wells, JK and Beaumont, PWR (1985) Debonding and pull-out processes in fibrous composites. Journal of Materials Science, 20. pp. 1275-1284. ISSN 0022-2461

Ogin, SL and Smith, PA and Beaumont, PWR (1985) Matrix cracking and stiffness reduction during the fatigue of a (0/90)s GFRP laminate. Composites Science and Technology, 22. pp. 23-31. ISSN 0266-3538

Ogin, SL and Smith, PA and Beaumont, PWR (1985) A stress intensity factor approach to the fatigue growth of transverse ply cracks. Composites Science and Technology, 24. pp. 47-59. ISSN 0266-3538

Gilbert, DG and Beaumont, PWR and Nixon, WC (1984) Direct observations of dynamic fracture mechanisms in polymeric materials. Journal of Materials Science Letters, 3. pp. 961-964. ISSN 0261-8028

Anstice, PD and Beaumont, PWR (1983) Hygrothermal ageing and fracture of glass fibre-epoxy composites. Journal of Materials Science, 18. pp. 3404-3408. ISSN 0022-2461

Mao, TH and Beaumont, PWR and Nixon, WC (1983) Direct observations of crack propagation in brittle materials. Acta Materiae Compositae Sinica / Fuhe Cailiao Xuebao. ISSN 1000-3851

Mao, TH and Beaumont, PWR and Nixon, WC (1983) Direct observations of crack propagation in brittle materials. Journal of Materials Science Letters, 2. pp. 613-616. ISSN 0261-8028

Anstice, PD and Beaumont, PWR (1983) Direct observations of the failure and toughness of hybrid composites. Journal of Materials Science Letters, 2. pp. 617-622. ISSN 0261-8028

Wells, JK and Beaumont, PWR (1982) Correlations for the fracture of composite materials. Scripta Metallurgica, 16. pp. 99-103. ISSN 1359-6462

Poursartip, A and Ashby, MF and Beaumont, PWR (1982) Damage accumulation during fatigue of composites. Scripta Metallurgica, 16. pp. 601-606. ISSN 1359-6462

Kunz, SC and Beaumont, PWR (1981) Low-temperature behaviour of epoxy-rubber particulate composites. Journal of Materials Science, 16. pp. 3141-3152. ISSN 0022-2461

Russell, DP and Beaumont, PWR (1980) Structure and properties of injection-moulded nylon-6 (part 1). Journal of Materials Science, 15. pp. 197-207. ISSN 0022-2461

Russell, DP and Beaumont, PWR (1980) Structure and properties of injection-moulded nylon-6 (part 2). Journal of Materials Science, 15. pp. 208-215. ISSN 0022-2461

Russell, DP and Beaumont, PWR (1980) Structure and properties of injection-moulded nylon-6 (part 3). Journal of Materials Science, 15. pp. 216-221. ISSN 0022-2461

Beaumont, PWR and Anstice, PD (1980) A failure analysis of the micromechanisms of fracture of carbon fibre and glass fibre composites in monotonic loading. Journal of Materials Science, 15. pp. 2619-2635. ISSN 0022-2461

Kunz Douglass, SC and Beaumont, PWR and Ashby, MF (1980) A model for the toughness of epoxy-rubber particulate composites. Journal of Materials Science, 15. pp. 1109-1123. ISSN 0022-2461

Owen, AB and Beaumont, PWR (1979) Fracture behaviour of commercial surgical acrylic bone cements. Journal of Biomedical Engineering, 1. pp. 277-280. ISSN 0141-5425

Beaumont, PWR (1979) Fracture processes in acrylic bone cement containing barium sulphate dispersions. Journal of Biomedical Engineering, 1. pp. 147-152. ISSN 0141-5425

Beaumont, PWR and Aleszka, JC (1978) Cracking and toughening of concrete and polymer-concrete dispersed with short steel wires. Journal of Materials Science, 13. pp. 1749-1760. ISSN 0022-2461

Beaumont, PWR and Young, RJ (1977) Failure of brittle polymers by slow crack growth (part 3). Journal of Materials Science, 12. pp. 684-692. ISSN 0022-2461

Beaumont, PWR and Young, RJ (1977) Strength and fracture of Acrylic bone cement and cement-metal interfaces. Plastics and Rubber: Materials and Applications, Februa. pp. 2-6. ISSN 0307-9414

Beaumont, PWR (1977) The strength of acrylic bone cements and acrylic cement-stainless steel interfaces (part 1). Journal of Materials Science, 12. pp. 1845-1852. ISSN 0022-2461

Beaumont, PWR and Plumpton, B (1977) The strength of acrylic bone cements and acrylic cement-stainless steel interfaces (part 2). Journal of Materials Science, 12. pp. 1853-1856. ISSN 0022-2461

Young, RJ and Beaumont, PWR (1976) Crack propagation and arrest in epoxy resins. Journal of Materials Science, 11. pp. 776-779. ISSN 0022-2461

Young, RJ and Beaumont, PWR (1976) Time-dependent failure of poly(methyl methacrylate). Polymer, 17. pp. 717-722. ISSN 0032-3861

Beaumont, PWR and Young, RJ (1975) Slow crack growth in acrylic bone cement. Journal of Biomedical Materials Research, 9. pp. 423-439. ISSN 0021-9304

Beaumont, PWR and Young, RJ (1975) Failure of brittle polymers by slow crack growth (part 1). Journal of Materials Science, 10. pp. 1334-1342. ISSN 0022-2461

Beaumont, PWR and Young, RJ (1975) Failure of brittle polymers by slow crack growth (part 2). Journal of Materials Science, 10. pp. 1343-1350. ISSN 0022-2461

Beaumont, PWR (1974) A fracture mechanics approach to failure in fibrous composites. Journal of Adhesion, 6. pp. 107-137. ISSN 0021-8464

Beaumont, PWR and Phillips, DC (1972) Tensile strengths of notched composites. Journal of Composite Materials, 6. pp. 32-46. ISSN 0021-9983

Beaumont, PWR and Harris, B (1972) The energy of crack propagation in carbon fibre-reinforced resin systems. Journal of Materials Science, 7. pp. 1265-1279. ISSN 0022-2461

FitzRandolph, J and Phillips, DC and Beaumont, PWR and Tetelman, AS (1972) The fracture energy and acoustic emission of a boron-epoxy composite. Journal of Materials Science, 7. pp. 289-294. ISSN 0022-2461

Beaumont, PWR and Phillips, DC (1972) The fracture energy of a glass fibre composite. Journal of Materials Science, 7. pp. 682-686. ISSN 0022-2461

FitzRandolph, J and Phillips, DC and Beaumont, PWR (1971) Acoustic emission studies of a Boron-epoxy composite. Journal of Composite Materials, 5. pp. 542-548. ISSN 0021-9983

B, H and P W R, B and E, MDF (1971) Strength and fracture toughness of carbon fibre polyester composites. Journal of Materials Science, 6. pp. 238-251. ISSN 0022-2461

Harris, B and Beaumont, PWR and Rosen, A (1969) Silane coupling in carbon fibre-reinforced polyester resin. Journal of Materials Science, 4. pp. 432-438. ISSN 0022-2461

Book

Beaumont, PWR and Schultz, JM and Friedrich, K (1990) Design with advanced composite materials. Delaware Composites Design Encyclopedia, 4 . Technomic.

Book Section

Beaumont, PWR (2005) Cracking models. In: Multi-scale Modelling of Composite Material Systems: The Art of Predictive Damage Modelling. CRC Press / Woodhead Publishing Limited, Chapter 3-.

Beaumont, PWR (2003) Physical modelling of damage development in structural composite materials under stress. In: Fatigue in Composites: Science and Technology of the Fatigue Response of Fibre-Reinforced Plastics. CRC Press / Woodhead Publishing Limited, Chapter 13-.

Beaumont, PWR (1994) Damage accumulation. In: Damage Mechanics of Composite Materials. Composite Materials Series, 9 . Elsevier Press, Chapter 5-.

Kortschot, MT and Beaumont, PWR (1991) Damage-based notched strength modelling. In: Composite Materials: Fatigue and Fracture. ASTM Special Technical Publication, 1110 . American Society for Testing and Materials, pp. 596-616.

Spearing, SM and Beaumont, PWR and Ashby, MF (1991) Fatigue damage mechanics of notched graphite-epoxy laminates. In: Composite Materials: Fatigue and Fracture. ASTM Special Technical Publication, 1110 . American Society for Testing and Materials, pp. 617-637.

Beaumont, PWR (1989) Design with advanced composite materials. In: Design with Advanced Composite Materials. The Design Council / Springer-Verlag, Chapter 10-.

Beaumont, PWR (1989) "Failure of composites" stress concentrations, cracks and notches. In: Concise Encyclopedia of Composite Materials. Advances in Materials Science and Engineering . Pergamon Press, Oxford, UK, pp. 75-77.

Beaumont, PWR and Wells, JK (1989) Toughness of fibrous composites. In: Concise Encyclopedia of Composite Materials. Advances in Materials Science and Engineering . Pergamon Press, Oxford, UK, pp. 275-280.

Beaumont, PWR (1988) Micromechanics of composite fracture. In: Engineering Materials 200: Commemorating Australia’s Bicentenary. Materials Forum, 11 . Trans Tech Publications, Ruschcutters Bay, NSW, Australia, pp. 332-340.

Conference or Workshop Item

Beaumont, PWR (2007) Hierarchy of multi-scale modelling: solving problems in composite failure. In: International Conference on Composite Materials, 9-4-2007 to 12-4-2007, University of Sheffield, UK.

Beaumont, PWR (2007) Hierarchy of multi-scale modelling: solving problems in composite failure. In: 2nd International Conference on Composite Materials, -2-2007 to --, New Delhi, India.

Beaumont, PWR (2005) Predictive multi-scale modelling (physical modelling of composite material systems and components). In: 2nd Conference on Advances in Multi-scale Modelling of Composite Materials and Systems and Components, 25-9-2005 to 30-9-2005, Monterey, CA, USA.

Beaumont, PWR and Sekine, H (2002) Physical modelling of the engineering problems of composites and structures. In: The 5th Seminar on Experimental Techniques and Design in Composite Materials, -9-2000 to --, Cagliari, Italy pp. 255-266..

Sekine, H and Beaumont, PWR (2000) An experimental study of the repair efficiency of composite patches bonded to aircraft structural panels. In: 9th US-Japan Conference on Composite Materials, 3-7-2000 to 5-7-2000, Resources Development Center, Mishima, Shizuoka, Japan.

Beaumont, PWR and Shercliff, HR and Dimant, RA and Sekine, H (2000) Physical modelling of engineering problems of composites and structures. In: 9th European Conference on Composite Materials (ECCM 9), 4-6-2000 to 7-6-2000, Brighton, UK.

Beaumont, PWR and Greer Jr, JM (1999) Towards a predictive design methodology for composite laminate patches based on physical modeling of failure processes. In: The 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, -8-1998 to --, Williamsburg, VA pp. 545-554..

Sekine, H and Beaumont, PWR (1998) A physically based micromechanical theory and diagrams of macroscopic stress-corrosion cracking in GFRP laminates. In: The 8th Japan-US Conference on Composite Materials, -9-1998 to --, Baltimore; MD, USA, pp. 199-208..

Beaumont, PWR and Spearing, SM (1998) Predictive design and modelling failure problems in fibre composites. In: The 8th EACM European Conference on Composite Materials (ECCM-8), 1-6-1998 to 4-6-1998, Naples, Italy pp. 557-564..

Beaumont, PWR and Dimant, RA and Shercliff, HR (1997) Modelling problems of damage and fracture of notched fibre composites. In: The 11th Internatonal Conference on Composite Materials (ICCM-XI): Vol 2: Fatigue, Fracture and Ceramic Matrix Composites, -7-1997 to --, Gold Coast, Australia pp. 342-352..

Cowley, KD and Beaumont, PWR (1995) The micro-mechanics of crack growth in fiber composites: observing and modelling the failure processes. In: The 10th International Conference on Composite Materials (ICCM X): Vol. 1: Fatigue and Fracture, -8-1995 to --, Whistler; Canada pp. 787-801..

Vekinis, G and Ashby, MF and Shercliff, HR and Beaumont, PWR (1992) The micromechanisms of fracture of Alumina and a ceramic-based fibre composite: modelling the failure processes. In: International Conference on Microphenomena in Fibre Composites, 30-7-1992 to 1-8-1992, Ministry of Technology, Tel Aviv, Israel.

Kedward, KT and Beaumont, PWR (1992) On the notch sensitivity and toughness of a ceramic composite. In: ASME Annual Winter Meeting on Engineering Materials, 8-11-1992 to 12-11-1992, Anaheim, CA, USA.

Beaumont, PWR and Spearing, SM and Kortschot, MT (1991) The mechanics of fatigue damage in structural composite materials. In: Composites: Design, Manufacture, and Application: the 8th International Conference on Composite Materials (ICCM-8), -7-1991 to --, Honolulu, HI.

Beaumont, PWR and Spearing, SM and Kortschot, MT (1991) Development of fatigue damage mechanics for application to the design of damage-tolerant composite components. In: The International Conference on Spacecraft Structures and Mechanical Testing, -4-1991 to --, Noordwijk, The Netherlands pp. 91-96..

Beaumont, PWR and Spearing, SM (1991) The damage mechanics of static and cyclic failure of carbon fibre-polymer composites. In: The 1st International Conference on the Deformation and Fracture of Composites, -3-1991 to --, Manchester, UK p.511-..

Vekinis, G and Ashby, MF and Beaumont, PWR and Shercliff, HR (1991) Failure mechanisms of ductile particle toughened ceramics and fibre strengthened ceramic composites. In: The 112th ASME Winter Annual Meeting on Failure Mechanisms in High Temperature Composite Materials, -12-1991 to --, Atlanta, GA, USA.

Beaumont, PWR and Spearing, SM and Kortschot, MT (1991) Development of fatigue damage mechanics for application to the design of damage-tolerant composite components. In: The 14th Annual Energy-Sources Technology Conference: Symposium on Composite Material Technology, -1-1991 to --, Houston, TX pp. 89-96..

Beaumont, PWR (1990) The mechanics of fatigue damage in structural composite materials. In: The 4th European Conference on Composite Materials (ECCM'90): Developments in the Science and Technology of Composite Materials, -9-1990 to --, Stuttgart, Germany pp. 195-205..

Beaumont, PWR and Spearing, SM (1990) Development of fatigue damage mechanics for application to the design of structural composite components. In: Mechanical Identification of Composites: the European Mechanics Colloquium on Experimental Identification of the Mechanical Characteristics of Composite Materials and Structures, -12-1990 to --, Saint-Etienne, France pp. 311-326..

Spearing, SM and Beaumont, PWR (1990) Fatigue damage mechanics of carbon fibre composites. In: The 8th Biennial European Conference on Fracture (ECF-8): Fracture Behaviour and Design of Materials and Structures, 2-10-1990 to 5-10-1990, Turin, Italy.

Beaumont, PWR (1989) On Kevlar fibre-epoxy laminates under fatigue loading. In: ASME International Conference on Advanced Materials, 24-7-1989 to 28-7-1989, Honolulu, USA.

Beaumont, PWR (1988) Micromechanisms of crack extension in brittle polymers containing rubbery particles. In: American Chemical Society International Conference on Toughened Plastics, 21-9-1988 to 25-9-1988, Los Angeles, USA.

Beaumont, PWR (1988) Fatigue damage mechanics of fibre composites. In: The International Conference on Materials and Engineering Design: The Next Decade, -- to -- pp. 311-319..

De Vouvray, A and Haug, E and Dowlatyari, E and Beaumont, PWR and Spearing, M (1988) Advanced model development and validation for composite damage mechanics. In: The ESA Conference on Advanced Structural Materials for the Design of Space Applications, 23-3-1988 to 25-3-1988, Noordwijk, The Netherlands pp. 343-360..

Kortschot, MT and Beaumont, PWR (1988) Damage mechanics of carbon fibre composite materials. In: The ESA Conference on Advanced Structural Materials for the Design of Space Applications, 23-3-1988 to 25-3-1988, Noordwijk, The Netherlands pp. 335-342..

Kortschot, MT and Beaumont, PWR and Nixon, WC and Breton, BC (1987) Crack advancement in a carbon fibre-epoxy composite observed by dynamic SEM. In: The ICCM/ECCM Joint International Conference on Composite Materials, -7-1987 to --, London, UK pp. 388-396..

Ganczakowski, HL and Smith, PA and Beaumont, PWR (1987) On the modulus of KFRP laminates in static and fatigue loading. In: The ICCM/ECCM Joint International Conference on Composite Materials, -7-1987 to --, London, UK pp. 166-175..

Evans, AG and Ahmad, ZB and Gilbert, DG and Beaumont, PWR (1985) Mechanisms of toughening in rubber toughened polymers. In: The 2nd International Conference on the Toughening of Plastics, -7-1985 to -- p.1611-..

Brown, DJ and Gilbert, DG and Beaumont, PWR and Nixon, WC and Windle, AH (1985) Microcracking and fracture in bulk polymers and composite films. In: The 6th International Conference on Deformation, Yield and Fracture of Polymers, -4-1985 to --, London, UK 74.1-74.4..

Gilbert, DG and Beaumont, PWR and Nixon, WC (1983) Direct observations of the micromechanisms of fracture in polymeric solids using the scanning electron microscope. In: 4th International Conference on Mechanical Behaviour of Materials, 15-8-1983 to 19-8-1983, Stockholm, Sweden pp. 705-710..

Beaumont, PWR and Wells, JK (1983) Origins of the toughness of fibrous composites. In: The European Meeting on Polymer Processing and Properties, 13-6-1983 to 16-6-1983, Capri, Italy pp. 328-336..

Pousartip, A and Ashby, MF and Beaumont, PWR (1982) Damage accumulation in composites during fatigue. In: The 3rd RISØ International Symposium on Fatigue and Creep of Composite Materials, 6-9-1982 to 10-9-1982, Roskilde, Denmark pp. 279-284..

Poursartip, A and Beaumont, PWR (1982) A damage approach to the fatigue of composites. In: The IUTAM Symposium on the Mechanics of Composite Materials, -8-1982 to -- pp. 449-456..

Wells, JK and Beaumont, PWR (1982) Use of fracture maps in a failure analysis of fibre composite materials. In: The 5th International Conference on Deformation, Yield and Fracture of Polymers, 29-3-1982 to 1-4-1982, Cambridge, UK.

Poursartip, A and Ashby, MF and Beaumont, PWR (1982) Damage accumulation during fatigue of composites. In: The 4th International Conference on Composite Materials (ICCM4), 25-10-1982 to 28-10-1982, Tokyo, Japan pp. 693-700..

Anstice, PD and Beaumont, PWR (1982) Hygrothermal ageing of fibrous composites. In: The 4th International Conference on Composite Materials (ICCM4), 25-10-1982 to 28-10-1982, Tokyo, Japan pp. 1001-1008..

Beaumont, PWR and Wells, JK and Anstice, PD (1982) Development of fracture maps for fibrous composites. In: The 37th Annual Conference of the Reinforced Plastics/Composites Institute: Session 20A, -1-1982 to --, Washington D.C. pp. 1-6..

Wells, JK and Beaumont, PWR (1981) Construction and use of toughness maps in a fracture analysis of the micromechanies of composite failure. In: The 6th ASTM Conference on Composite Materials: Testing and Design, -5-1981 to --, Phoenix, AZ, USA pp. 147-162..

Anstice, PD and Beaumont, PWR (1981) Hygrothermal ageing effects on the micromechanisms of crack extension in glass fibre and carbon fibre composites. In: The 5th International Conference on Fracture (ICF5), 29-3-1981 to 3-4-1981, Cannes, France pp. 473-483..

Munro, M and Beaumont, PWR (1979) Fracture mechanisms and toughening of fibre composites. In: The 3rd International Conference on the Mechanical Behaviour of Materials (ICM-3), -8-1979 to --, Cambridge, UK pp. 253-261..

Beaumont, PWR (1979) Fracture mechanisms in fibrous composites. In: The Symposium on Fracture Mechanics - Current Status, Future Prospects, 16-3-1979 to --, Cambridge, UK pp. 211-233..

Kunz, SC and Beaumont, PWR and Ashby, MF (1978) Toughening of epoxy-rubber particulate composites. In: International Conference on Toughening of Plastics, 4-7-1978 to 6-7-1978, London, UK 15.1-15.10..

Beaumont, PWR and Joliffe, V and Gore, D (1977) Fracture of particulate composites based on PMMA. In: The 4th International Conference on Fracture: Advances in Research on the Strength and Fracture of Materials, -6-1977 to --, Waterloo, Canada pp. 1015-1023..

Beaumont, PWR (1977) Crack growth in acrylic bone cement. In: The 3rd Annual Meeting of the Society for Biomaterials and the 9th Annual International Biomaterials Symposium, --1977 to --, New Orleans, USA p.55-..

Young, RJ and Beaumont, PWR (1976) Time dependent failure of PMMA. In: The 2nd International Conference on the Mechanical Behaviour of Materials, 16-8-1976 to 20-8-1976, Boston, MA, USA.

Young, RJ and Beaumont, PWR (1976) Slow crack growth in epoxy and epoxy composites. In: The 21st SAMPE Bicentennial of Materials Progress, -4-1976 to --, Los Angeles, USA pp. 885-894..

Beaumont, PWR and Young, RJ (1975) Strength and fracture of acrylic bone cement and acrylic cement-metal interfaces. In: The 2nd Conference on Plastics in Medicine and Surgery, 24-9-1975 to 25-9-1975, Glasgow, UK pp. 1-10..

Beaumont, PWR and Riewald, PG and Zweben, C (1975) Methods for improving the impact resistance of composite materials. In: The ASTM Symposium on Foreign Object Impact Damage to Composites, -9-1973 to --, Philadelphia, USA pp. 134-158..

Young, RJ and Beaumont, PWR (1975) Failure mechanisms in glass filled epoxy resin composites. In: The 1st International Conference on Composite Materials (ICCM-1), 7-4-1975 to 11-4-1975, Geneva, Switzerland pp. 1085-1105..

Beaumont, PWR and Server, WL (1974) Some observations on the dynamic fracture behaviour of carbon fiber-strengthened epoxy resin. In: The ASTM Symposium on Composite Reliability, 15-4-1974 to 16-4-1974, Las Vegas, Nevada, USA.

Kunz, SC and Beaumont, PWR (1973) Microcrack growth in graphite-epoxy resin systems during compressive fatigue. In: The ASTM Symposium on the Fatigue of Composite Materials, -12-1973 to --, Bal Harbour, FL, USA pp. 71-91..

Beaumont, PWR and Tetelman, AS (1972) The fracture strength and toughness of fibrous composites. In: The Annual Spring Meeting of AIME: Failure Modes in Composites, -5-1972 to --, Boston, MA.

Monograph

Beaumont, PWR (1998) Predictive design abd certification procedures: modelling fracture stress, fatigue strength and life-time of composites and structures. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Cowley, KD and Beaumont, PWR (1997) Damage mechanics of composite materials at elevated temperature. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Sekine, H and Beaumont, PWR (1997) A physically-based micromechanical theory of macroscopic stress corrosion cracking in glass fibre-polymer laminates. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Spearing, SM and Beaumont, PWR (1997) A predictive design methodology: the physical modelling of the fracture of fiber composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Cowley, KD and Beaumont, PWR (1996) Fracture and damage mechanics of composite materials at elevated temperature: Vol. 1. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Cowley, KD and Beaumont, PWR (1996) Fracture and damage mechanics of composite materials at elevated temperature: Vol. 2. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Vekinis, G and Ashby, MF and Beaumont, PWR (1992) Direct observation of CAS-glass/SiC composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Shercliff, HR and Vekinis, G and Ashby, MF and Beaumont, PWR (1992) Direct observation of fracture of CAS-glass/SiC composites and processing of toughened alumina. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Ashby, MF and Beaumont, PWR and Shercliff, HR and Vekinis, G (1991) Direct observation of fracture and the damage mechanics of ceramics. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Spearing, SM and Beaumont, PWR and Kortschott, MT (1991) The fatigue damage mechanics of notched carbon fibre/PEEK laminates. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kedward, KT and Beaumont, PW (1991) The treatment of fatigue and damage accumulation in composite design. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Vekinis, G and Ashby, MF and Beaumont, PWR (1990) Direct observation of fracture and the damage mechanics of ceramics: 2nd annual progress report. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Spearing, SM and Beaumont, PWR (1990) Fatigue damage mechanics of composite materials I: experimental measurement of damage and post-fatigue properties. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Spearing, SM and Beaumont, PWR (1990) Fatigue damage mechanics of composite materials II: a damage growth model. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Spearing, SM and Beaumont, PWR (1990) Fatigue damage mechanics of composite materials III: prediction of post-fatigue strength. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Spearing, SM and Beaumont, PWR and Smith, PA (1990) Fatigue damage mechanics of composite materials IV: prediction of post-fatigue stiffness. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Spearing, SM and Beaumont, PWR and Ashby, MF (1990) Fatigue damage mechanics of notched carbon fibre epoxy laminates. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kortschot, MT and Beaumont, PWR (1989) Damage mechanics of composite materials I: measurement of damage and strength. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kortschot, MT and Beaumont, PWR (1989) Damage mechanics of composite materials II: a damage-based notched strength model. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kortschot, MT and Ashby, MF and Beaumont, PWR (1989) Damage mechanics of composite materials III: prediction of damage growth and notched strength. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kortschot, MT and Beaumont, PWR (1989) Damage mechanics of composite materials IV: the effect of lay-up on damage growth and notched strength. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kortschot, MT and Beaumont, PWR (1989) Damage-based notched strength modelling: a summary. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Vekinis, G and Beaumont, PWR (1989) Direct observation of fracture and the damage mechanics of ceramics. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR (1988) The failure of fibre composites: a perspective. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR (1988) The micromechanics of crack extension in brittle polymers containing rubbery particles. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kortschot, MT and Beaumont, PWR and Nixon, WC and Breton, BC (1987) Crack advancement in a carbon-fibre epoxy composite observed by dynamic scanning electron microscopy. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Ganczakowski, HL and Smith, PA and Beaumont, PW (1987) On the modulus of KFRP laminates in static and fatigue loading. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR (1987) The micromechanics of composite fracture. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Poursartip, A and Smith, PA and Ganczakowski, H and Beaumont, PWR (1986) A computer-controlled fatigue machine for composite testing. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Ashby, MF and Beaumont, PWR and Gibson, LJ and Gilbert, DG and Maiti, SK (1985) Deformation mechanism maps for cellular materials and solid polymers. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Wells, JK and Beaumont, PWR (1984) Crack tip energy absorption processes in fibre composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Wells, JK and Beaumont, PWR (1984) Debonding and pull-out processes in fibrous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Gilbert, DG and Ashby, MF and Beaumont, PW (1984) Deformation maps for amorphous polymers. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Evans, AG and Williams, S and Beaumont, PW (1984) On the toughness of particulate filled polymers. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Ogin, SL and Smith, PA and Beaumont, PWR (1984) Transverse ply crack growth and associated stiffness reduction during the fatigue of a simple crossply laminate. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Anstice, PD and Beaumont, PWR (1983) Direct observations of the failure and toughness of hybrid composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Anstice, PD and Beaumont, PWR (1983) Hygrothermal aging and fracture of glass fibre-epoxy composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Wells, JK and Beaumont, PWR (1981) Correlations for the fracture of composite materials. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Mao, TH and Beaumont, PWR and Nixon, WC (1981) Crack propagation in fibrous and particulate composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Magarey, A and Beaumont, PWR (1981) Damage accumulation during fatigue of composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR (1981) Failure of fibrous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kunz, SC and Beaumont, PWR (1981) Low temperature behavior of epoxy-rubber particulate composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR (1981) Micromechanisms of fracture and hygrothermal aging of fibrous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Wells, JK and Beaumont, PWR (1981) The construction and use of toughness maps in a fracture analysis of the micromechanics of a composite failure. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Poursartnip, A and Ashby, MF and Beaumont, PWR (1981) The fatigue damage-mechanics of carbon-fibre reinforced laminates. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Owen, AB and Beaumont, PWR (1980) Fracture of surgical acrylic bone cement. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Anstice, PD and Beaumont, PWR (1980) Hygrothermal effects on the micromechanisms of cork extension in glass fibre and carbon fibre composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Russell, DP and Beaumont, PWR (1980) Structure and properties of injection moulded nylon-6. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kunz Douglass, S and Beaumont, PWR and Ashby, MF (1980) A model for the toughness of epoxy-rubber particulate composite. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Anstice, PD and Beaumont, PWR (1979) Micromechanisms of fracture of fibrous composites in monotonic loading. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR (1979) Modelling microfracture processes in fibrous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR (1977) Cracking and toughness of concrete and polymer-concrete dispersed with short steel wires. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR and Kirk, JN and Munro, M (1977) Improving the impact and fracture resistance of fibrous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR and Martin, V (1976) Improving the impact and fracture resistance of fibrous composites: final technical report. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR and Kunz, SC and Munro, M (1975) Compressive fatigue of carbon fibre reinforced plastics. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Beaumont, PWR (1975) Improving the impact and fracture resistance of fibrous composites. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.