Article

Tucker, PG and Eastwood, S and Klostermeier, C and Xia, H and Ray, P and Tyacke, JC and Dawes, WN (2011) Hybrid LES approach for practical turbomachinery flows: Part 2 - further applications. Transactions of the ASME Journal of Turbomachinery. ISSN 0889-504X

Krishnababu, SK and Hodson, HP and Booth, GD and Lock, GD and Dawes, WN (2010) Aerothermal Investigation of Tip Leakage Flow in a Film Cooled Industrial Turbine Rotor. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 132. -. ISSN 0889-504X

Tucker, PG and Eastwood, S and Klostermeier, C and Xia, H and Ray, P and Tyacke, JC and Dawes, WN (2010) Hybrid LES approach for practical turbomachinery flows: Part 2 - further applications. pp. 1055-1067.

Xia, H and Tucker, PG and Dawes, WN (2010) Level sets for CFD in aerospace engineering. Progess in Aerospace Sciences, 46. pp. 274-283. ISSN 0376-0421

Krishnababu, SK and Newton, PJ and Dawes, WN and Lock, GD and Hodson, HP and Hannis, J and Whitney, C (2009) Aerothermal investigation of tip leakage flow in axial flow turbines Part I - effect of tip geometry and tip clearance gap. Transactions of the ASME Journal of Turbomachinery, 131. 011006-. ISSN 0889-504X

Krishnababu, SK and Dawes, WN and Hodson, HP and Lock, GD and Hannis, J and Whitney, C (2009) Aerothermal investigation of tip leakage flow in axial flow turbines Part II - effect of relative casing motion. Transactions of the ASME Journal of Turbomachinery, 131. 011007-. ISSN 0889-504X

Newton, PJ and Lock, GD and Krishnababu, SK and Hodson, HP and Dawes, WN and Hannis, J and Whitney, C (2009) Aerothermal investigation of tip leakage flow in axial flow turbines Part III - tip cooling. Transactions of the ASME Journal of Turbomachinery, 131. 011008-. ISSN 0889-504X

Krishnababu, SK and Hodson, HP and Dawes, WN and Newton, PJ and Lock, GD (2009) Numerical and experimental investigation of tip leakage flow and heat transfer using idealised rotor-tip models at transonic conditions. Aeronautical Journal, 113. pp. 165-176. ISSN 0001-9240

Dawes, WN (2008) Rapid prototyping design optimization using flow sculpting. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 130. -. ISSN 0889-504X

Hsu, PL and Cheng, SJ and Saumarez, RC and Dawes, WN and McMahon, RA (2008) An extended computational model of the circulatory system for designing ventricular assist devices. ASAIO J, 54. pp. 594-599.

Krishnababu, SK and Hodson, HP and Booth, GD and Lock, GD and Dawes, WN (2008) Aero-thermal investigation of tip leakage flow in a film cooled industrial turbine rotor. Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea and Air, 4. pp. 177-186.

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM and Clarkson, PJ (2008) Biobjective design optimization for axial compressors using tabu search. AIAA Journal, 46. pp. 701-711. ISSN 0001-1452

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM and Clarkson, PJ (2008) Insight into high-quality aerodynamic design spaces through multi-objective optimization. Computer Modeling in Engineering and Science, 37. pp. 1-44. ISSN 1526-1492

Dawes, WN (2007) Turbomachinery computational fluid dynamics: asymptotes and paradigm shifts. Philos Transact A Math Phys Eng Sci, 365. pp. 2553-2585. ISSN 1364-503X

Jarrett, JP and Dawes, WN and Clarkson, PJ (2007) An approach to integrated multi-disciplinary turbomachinery design. Transactions of the ASME, Journal of Turbomachinery, 129. pp. 488-494. ISSN 0889-504X

Savill, AM and Richardson, GA and Dawes, WN (2007) An unsteady, moving mesh CFD simulation for Harrier hot-gas ingestion control analysis. The Aeronautical Journal, 111. pp. 133-144. ISSN 0001-9240

Molinari, M and Dawes, WN (2006) Review of evolution of compressor design process and future perspectives. P I MECH ENG C-J MEC, 220. pp. 761-771. ISSN 0954-4062

Newton, PJ and Lock, GD and Krishnababu, SK and Hodson, HP and Dawes, WN and Hannis, J and Whitney, C (2006) Heat transfer and aerodynamics of turbine blade tips in a linear cascade. Transactions of the ASME, Journal of Turbomachinery, 128. pp. 300-309. ISSN 0889-504X

Molinari, M and Dawes, WN (2006) A review of the evolution of the compressor design process and future perspectives. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science incorporating the Journal of mechanical engineering science, 220. pp. 761-772. ISSN 0954-4062

Ciardi, M and Sagaut, P and Dawes, WN (2005) A dynamic finite volume scheme for large-eddy simulation on unstructured grids. Journal of Computational Physics, 210. pp. 632-655. ISSN 0021-9991

Newton, PJ and Krishnababu, SK and Lock, G and Hodson, HP and Dawes, WN and Hannis, J and Whitney, C (2005) Heat transfer and aerodynamics of turbine blade tips in a linear cascade. Transactions of the ASME Journal of Turbomachinery, 128. pp. 300-309. ISSN 0889-504X

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM (2005) Multi-objective aerodynamic design optimisation for axial compressors. ERCOFTAC Bulletin (theme - Design Optimisation). pp. 21-24.

Dawes, WN (2005) Rapid prototyping design optimisation using flow sculpting. ASME Transactions, Journal of Turbomachinery. ISSN 0889-504X

Ciardi, M and Sagaut, P and Klein, M and Dawes, WN (2005) A dynamic finite volume scheme for large-eddy simulation on unstructured grids. Journal of Computational Physics, 210. pp. 632-655. ISSN 0021-9991

Cant, RS and Dawes, WN and Savill, AM (2004) Advanced CFD and modelling of accidental explosions. Annual Review of Fluid Mechanics, 36. pp. 97-119. ISSN 0066-4189

Vicedo, J and Vilmin, S and Dawes, WN and Savill, AM (2004) Intermittency transport modeling of separated flow transition. Journal of Turbomachinery, 126. pp. 424-431. ISSN 0889-504X

Dawes, WN and Cant, RS and Savill, AM (2003) Achieving a balance between computational geometry, mesh generation, flow solving and modelling: the key to making CFD useful. Computational Fluid Dynamics Journal, 12. pp. 354-366. ISSN 0918-6654

Biktasheva, IV and Biktashev, VN and Dawes, WN and Holden, AV and Saumarez, RC and Savill, AM (2003) Dissipation of the excitation front as a mechanism of self-terminating arrhhythmias. International Journal of Bifurcation and Chaos, 13. pp. 3645-3655. ISSN 0218-1274

Vicedo, J and Vilmin, S and Dawes, WN and Savill, AM (2003) Intermittency transport modeling of separated flow transition. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 B. pp. 811-819.

Yao, YF and Savill, AM and Sandham, ND and Dawes, WN (2002) Simulation and modelling of turbulent trailing edge flow. Flow, Turbulence and Combustion, 68. pp. 313-333. ISSN 1386-6184

Yao, YF and Savill, AM and Dawes, WN and Sandham, ND (2002) Simulation of turbulent trailing-edge flow using RANS and DNS. Flow, Turbulence and Combustion, 68. pp. 313-333. ISSN 1386-6184

Dawes, WN and Dhanasekaran, PC and Demargne, AAJ and Kellar, WP and Savill, AM (2001) Reducing bottlenecks in the CAD-to-mesh-to-solution cycle time to allow CFD to participate in design. Transactions of the ASME Journal of Turbomachinery, 123. pp. 552-557. ISSN 0889-504X

De Foy, B and Dawes, WN (2000) Unstructured pressure-correction solver based on a consistent discretization of the Poisson equation. International Journal of Numerical Methods in Fluids, 34. pp. 463-478. ISSN 0271-2091

Dawes, WN (1999) Challenges for turbomachinery CFD in the 21st century. Proceedings of the 1st International Conference on Engineering Thermophysics (ICET '99). pp. 2-73.

Watterson, JK and Dawes, WN and Savill, AM and White, AJ (1999) Predicting turbulent flow in a staggered tube bundle. International Journal of Heat and Fluid Flow, 20. pp. 581-591. ISSN 0142-727X

Freidrichs, S and Hodson, HP and Dawes, WN (1999) The design of an improved endwall film-cooling configuration. Transactions of the ASME Journal of Turbomachinery, 121. pp. 772-780. ISSN 0889-504X

Freidrichs, S and Hodson, HP and Dawes, WN (1999) The design of an improved endwall film-cooling configuration. Transactions of the ASME Journal of Turbomachinery, 121. pp. 772-780. ISSN 0889-504X

Denton, JD and Dawes, WN (1998) Computational fluid dynamics for turbomachinery design. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 213. pp. 107-124. ISSN 0954-4062

Watterson, JK and Connell, IJ and Savill, AM and Dawes, WN (1998) A solution-adaptive mesh procedure for predicting confined explosions. International Journal for Numerical Methods in Fluids, 26. pp. 235-247. ISSN 0271-2091

Freidrichs, S and Hodson, HP and Dawes, WN (1997) Aerodynamic aspects of endwall film cooling. Transactions of the ASME Journal of Turbomachinery, 119. pp. 786-793. ISSN 0889-504X

Freidrichs, S and Hodson, HP and Dawes, WN (1997) Aerodynamic aspects of endwall film-cooling. Transactions of the ASME Journal of Turbomachinery, 119. pp. 786-793. ISSN 0889-504X

O'Sullivan, MN and Krasnodebski, JK and Waitz, IA and Greitzer, EM and Tan, CS and Dawes, WN (1996) Computational study of viscous effects on lobed mixer flow features & performance. Journal for Propulsion and Power, 12. pp. 449-456. ISSN 0748-4658

O'Sullivan, MN and Krasnodebski, JK and Waitz, IA and Greitzer, EM and Tan, CS and Dawes, WN (1996) Computational study of viscous effects on lobed mixer flow features and performance. Journal of Propulsion and Power, 12. pp. 449-456. ISSN 0748-4658

Freidrichs, S and Hodson, HP and Dawes, WN (1996) Distribution of film cooling effectiveness on a turbine endwall measured using the ammonia and Diazo technique. ASME Journal of Turbomachinery, 118. pp. 613-621. ISSN 0889-504X

Freidrichs, S and Hodson, HP and Dawes, WN (1996) Distribution of film cooling effectiveness on a turbine endwall measured using the ammonia and diazo technique. Transactions of the ASME Journal of Turbomachinery, 118. pp. 613-621. ISSN 0889-504X

Hodson, HP and Dawes, WN (1996) Interpretation of measured profile losses in unsteady wake-turbine blade interaction studies. American Society of Mechanical Engineers (Paper). ISSN 0402-1215

Hustad, CW and Savill, AM and Dawes, WN (1995) A numerical investigation of aerofoil boundary-layer manipulator profile for cruise flight conditions. Applied Scientific Research, 54. pp. 267-280. ISSN 0003-6994

Dawes, WN (1995) A simulation of the unsteady interaction of a centrifugal impeller with its vaned diffuser: flow analysis. Transactions of the ASME Journal of Turbomachinery, 117. P. 213-. ISSN 0889-504X

Dawes, WN (1994) The solution-adaptive numerical simulation of the 3D viscous flow in the serpentine coolant passage of a radial inflow turbine blade. Transactions of the ASME Journal of Turbomachinery, 116. pp. 141-148. ISSN 0889-504X

Goyal, R and Dawes, WN (1993) A comparison of the measured and predicted flowfield in a modern fan-bypass configuration. Transactions of the ASME Journal of Turbomachinery, 115. pp. 273-283. ISSN 0889-504X

Dawes, WN (1993) The extension of a solution-adaptive 3D Navier-Stokes solver towards geometries of arbitrary complexity. Transaction of the ASME Journal of Turbomachinery, 115. p. 283-. ISSN 0889-504X

Dawes, WN (1993) The practical application of solution-adaption to the numerical simulation of complex turbomachinery problems. pp. 221-269.

Dawes, WN (1992) Simulation of three-dimensional viscous flow in turbomachinery geometries using a solution-adaptive unstructured mesh methodology. Journal of Turbomachinery, 114. pp. 528-537. ISSN 0889-504X

Dawes, WN (1992) Towards improved throughflow capability: the use of 3D viscous flow solvers in a multistage environment. Transactions of the ASME, Journal of Turbomachinery, 114. p. 8-. ISSN 0889-504X

Dawes, WN (1992) The simulation of three-dimensional viscous flow in turbomachinery geometries using a solution-adaptive unstructured mesh methodology. Transactions of the ASME Journal of Turbomachinery, 114. p. 528-. ISSN 0889-504X

Siden, GLD and Dawes, WN and Albråten, PJ (1990) Numerical simulation of the two-dimensional viscous flow in blade cascades using a solution adaptive unstructured mesh. Transactions of the ASME, Journal of Turbomachinery, 112. p. 311-. ISSN 0889-504X

Walker, PJ and Dawes, WN (1990) The extension and application of three-dimensional time marching to incompressible turbomachinery flow. Transactions of the ASME, Journal of Turbomachinery, 112. p. 385-. ISSN 0889-504X

Dawes, WN (1988) The application of multigrid to Navier-Stokes simulation of 3D flow in axial and radial turbomachinery. International Journal for Numerical Methods in Fluids, 8. pp. 1217-1227. ISSN 1097-0363

Dawes, WN and Camus, JJ and Xu, LP and Graham, CG (1987) MEASURED AND PREDICTED LOSS GENERATION IN TRANSONIC TURBINE BLADING. AGARD Conference Proceedings. 8. 1-8. 11. ISSN 0549-7191

Dawes, WN (1987) NUMERICAL STUDY OF THE 3D FLOWFIELD IN A TRANSONIC COMPRESSOR ROTOR WITH A MODELLING OF THE TIP CLEARANCE FLOW. AGARD Conference Proceedings. 21. 1-21. 12. ISSN 0549-7191

Dawes, WN (1987) A numerical analysis of the three dimensional viscous flow in a transonic compressor rotor and comparison with experiment. Transactions of the ASME, Journal of Turbomachinery, 109. pp. 83-90. ISSN 0889-504X

Dawes, WN (1986) Computation of off-design flows in a transonic compressor rotor. Transactions of the ASME Journal of Engineering for Gas Turbines and Power, 108. pp. 144-150. ISSN 0742-4795

Dawes, WN and Richards, PH (1985) Comparison of inviscid and viscous computations with an interferometrically measured transonic flow. AIAA Journal, 23. p. 834-. ISSN 0001-1452

Dawes, WN (1984) Computation of viscous compressible flow in blade cascades using an implicit iterative replacement algorithm. pp. 157-164.

Dawes, WN (1983) Efficient implicit algorithm for the equations of 2-D viscous compressible flow: application to shock-boundary layer interaction. International Journal of Heat and Fluid Flow, 4. ISSN 0142-727X

Dawes, WN and Richards, PH (1983) A comparison of experimental and numericalresults obtained for the secondary flow in a large turbine cascade. Journal of Physics D: Applied Physics, 16. pp. 539-551. ISSN 0022-3727

Dawes, WN and Squire, LC (1982) A study of shock waves in three-dimensional transonic flow. Transactions of the ASME Journal of Fluids Engineering, 104. pp. 393-399. ISSN 0098-2202

Book Section

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM (2005) Multiobjective optimisation of turbomachinery blades using tabu search. In: Evolutionary Multi-Criterion Optimization. Lecture Notes in Computer Science, 3410 . Springer, Berlin/Heidelberg, pp. 897-910. ISBN 9783540249832

Ciardi, M and Dawes, WN (2004) Large eddy and detached eddy simulations for broadband noise predictions in complex geometries. In: Direct and Large-Eddy Simulation V. ERCOFTAC Series, 9 . Springer, -. ISBN 9781402020322

Ciardi, M and Dawes, WN (2004) Large eddy and detached eddy simulations for broadband noise prediction in complex geometries. In: UNSPECIFIED UNSPECIFIED, pp. 489-498.

Kellar, WP and Savill, AM and Dawes, WN (1999) Integrated CAD/CFD visualisation of a generic Formula 1 car front wheel flowfield. In: Lecture Notes in Computer Science. High-Performance Computing and Networking: 7th International Conference, HPCN Europe 1999 Amsterdam, The Netherlands, April 12-14, 1999 Proceedings, 1593 . SpringerVerlagv KG, Germany, pp. 90-98.

Dawes, WN (1987) Developments in the calculation of 3D viscous compressible flow in axial turbomachinery. In: Aerothermodynamics of Low Pressure Steam Turbines and Condensers. Hemisphere Publishing Corporation, Washington, USA, -. ISBN 0891164464

Conference or Workshop Item

Dawes, WN and Dhanasekaran, PC and Kellar, WP (2011) Acceleration of an unstructured hybrid mesh RANS solver by porting to GPU architectures. In: UNSPECIFIED.

Dawes, WN and Kellar, W and Harvey, S and Eccles, N (2011) Automated meshing for aero-thermal analysis of complex automotive geometries. In: UNSPECIFIED.

Dawes, WN and Kellar, WP and Harvey, SA (2010) Generation of conjugate meshes for complex geometries for coupled multi-physics simulations. In: UNSPECIFIED.

Dawes, WN and Kellar, WP and Harvey, SA (2010) TOWARDS COOLED TURBINE PRELIMINARY LIFE PREDICTION via CONCURRENT AERODYNAMIC, THERMAL & MATERIAL STRESS SIMULATIONS on CONJUGATE MESHES. In: UNSPECIFIED pp. 711-722..

Zhao, L and Dawes, WN and Parks, GT and Jarrett, JP and Yang, S (2009) Robust airfoil design with respect to boundary layer transition. In: 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 17th AIAA/ASME/AHS Adaptive Structures Conference, 11th AIAA Non-Deterministic Approaches Conference, 4-5-2009 to 7-5-2009, Palm Springs, California, USA.

Dawes, WN and Kellar, WP and Richardson, GA (2009) APPLICATION OF TOPOLOGY-FREE OPTIMIZATION TO MANAGE COOLED TURBINE TIP HEAT LOAD. In: UNSPECIFIED pp. 533-543..

Ray, PK and Dawes, WN (2009) Detached-eddy simulation of transonic flow past a fan-blade section. In: UNSPECIFIED.

Dawes, WN and Kellar, WP and Harvey, SA (2009) Using Level Sets as the basis for a scalable, parallel geometry engine and mesh generation system. In: UNSPECIFIED.

Dawes, WN and Harvey, SA and Fellows, S and Eccles, N and Jaeggi, D and Kellar, WP (2009) A practical demonstration of scalable, parallel mesh generation. In: UNSPECIFIED.

Jaeggi, DM and Parks, GT and Dawes, WN and Clarkson, PJ (2008) Robust multi-fidelity aerodynamic design optimization using surrogate models. In: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 10-9-2008 to 12-9-2008, Victoria, British Columbia, Canada.

Janke, E and Hodson, HP and Faccini, B and Popovic, I and Lehmann, K and Georgakis, C and Pons, L and Lutum, E and Wallin, F and Dawes, WN and Favaretto, F (2008) Selected aerothermal CFD analyses of high-pressure turbine topics within the AITEB-2 project. In: ECCOMAS Congress 2008: 8th World Congress on Computational Mechanics, 30-6-2008 to 5-7-2008, Venice, Italy.

Bell, CP and Clarkson, PJ and Dawes, WN (2008) Improving the turbine cooling conceptual design process. In: ASME Turbo Expo 2008, 9-5-2008 to 13-5-2008, Berlin, Germany pp. 2631-2640..

Dawes, WN and Favaretto, CF and Harvey, SA and Fellows, S and Richardson, GA (2008) Towards topology-free optimization - An application to turbine internal cooling geometries. In: UNSPECIFIED.

Bell, C and Wynn, DC and Dawes, WN and Clarkson, PJ (2007) Using meta-data to enhance process simulation and identify improvements. In: 16th International Conference on Engineering Design (ICED'07), 28-8-2007 to 31-8-2007, Paris, France.

Krishnababu, SK and Newton, PJ and Dawes, WN and Lock, GD and Hodson, HP and Hannis, J and Whitney, C (2007) Aero-thermal investigation of tip leakage flow in axial flow turbines Part I - effect of tip geometry and tip clearance gap. In: ASME Turbo Exposition 2007, 14-5-2007 to 17-5-2007, Montreal, Canada pp. 727-738..

Krishnababu, SK and Dawes, WN and Hodson, HP and Lock, GD and Hannis, J and Whitney, C (2007) Aero-thermal investigation of tip leakage flow in axial flow turbines Part II - effect of relative casing motion. In: ASME Turbo Exposition 2007, 14-5-2007 to 17-5-2007, Montreal, Canada pp. 739-748..

Newton, PJ and Lock, GD and Krishnababu, SK and Hodson, HP and Dawes, WN and Hannis, J and Whitney, C (2007) Aero-thermal investigation of tip leakage flow in axial flow turbines Part III - tip cooling. In: ASME Turbo Exposition 2007, 14-5-2007 to 17-5-2007, Montreal, Canada pp. 317-328..

Kipouros, T and Molinari, M and Dawes, WN and Parks, GT and Savill, AM and Jenkins, KW (2007) An investigation of the potential for enhancing the computational turbomachinery design cycle using surrogate models and high performance parallelisation. In: ASME Turbo Expo 2007, 14-5-2007 to 17-5-2007, Montreal, Canada pp. 1415-1424..

Ghisu, T and Molinari, M and Parks, GT and Dawes, WN and Jarrett, JP and Clarkson, PJ (2007) Axial compressor intermediate duct design and optimisation. In: 3rd AIAA Multidisciplinary Design Optimization Specialist Conference, 23-4-2007 to 26-4-2007, Honolulu, Hawaii, USA.

Hutabarat, W and Parks, GT and Jarrett, JP and Dawes, WN and Clarkson, PJ (2007) Aerodynamic topology optimisation using an implicit representation and a multiobjective genetic algorithm. In: 8th International Conference on Evolution Artificielle, 29-10-2007 to 31-10-2007, Tours, France pp. 148-159..

Dawes, WN and Harvey, SA and Fellows, S and Favaretto, CF and Velivelli, A (2007) Viscous layer meshes from level sets on cartesian meshes. In: UNSPECIFIED pp. 6707-6715..

Dawes, WN (2006) Turbomachinery CFD: asymptotes and paradigm shifts. In: AIAA 36th Fluid Dynamics Conference, 5-6-2006 to 8-6-2006, San Francisco, CA, US.

Molinari, M and Jarrett, JP and Clarkson, PJ and Dawes, WN (2006) Characterizing the design space in multi-objective axial compressor blade optimization. In: 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1-5-2006 to 4-5-2006, Newport, RI, US pp. 3843-3856..

Richardson, GA and Dawes, WN and Savill, AM (2006) CFD analysis of hot gas ingestion mechanisms for the vertical descent phase of a Harrier aircraft. In: ASME Gas Turbine Expo 2006: Power for Land, Sea and Air, 8-5-2006 to 11-5-2006, Barcelona, Spain.

Dawes, WN (2006) Eliminating serial bottlenecks not just in the flow solving but also in mesh generation and geometry management. In: ASME Gas Turbine Expo: Power for Land, Sea and Air, 8-5-2006 to 11-5-2006, Barcelona, Spain.

Dawes, WN (2006) Towards a fully parallel integrated geometry kernel, mesh generator, flow solver and post-processor. In: 44th AIAA Aerospace Sciences Meeting and Exhibit, 9-1-2006 to 12-1-2006, Reno, Nevada, US pp. 11280-11286..

Richardson, GA and Dawes, WN and Savill, AM (2006) CFD analysis of hot gas ingestion mechanisms for the vertical descent phase of a harrier aircraft. In: UNSPECIFIED pp. 165-174..

Dawes, WN (2006) Eliminating serial bottlenecks not just in the flow solving but also in mesh generation & geometry management. In: UNSPECIFIED pp. 1355-1362..

Dawes, WN (2005) Application of VR-based flow sculpting to aero-engine design. In: 17th ISABE: International Symposium on Airbreathing Engines, -9-2005 to --, Munich, Germany.

Bell, CP and Jarrett, JP and Clarkson, PJ and Dawes, WN (2005) Improving the conceptual design of turbine rotor blade cooling systems. In: The 15th International Conference on Engineering Design (ICED'05), 15-8-2005 to 18-8-2005, Melbourne, Australia pp. 421-422..

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM (2005) Multi-criteria optimisation of turbomachinery blades: investigating the trade-off surface. In: 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 10-7-2005 to 13-7-2005, Tucson, AZ -..

Richardson, GA and Dawes, WN and Savill, AM (2005) Hot gas ingestion modelling for the vertical descent phase of a Harrier. In: 17th AIAA CFD Conference, 6-6-2005 to 9-6-2005, Toronto, Canada pp. 1909-1921..

Dawes, WN (2005) Rapid prototyping design optimisation using flow sculpting. In: ASME Turbo Expo 2005: Power for Land, Sea and Air, -6-2005 to --, Reno, NV, US pp. 991-1000..

Kipouros, T and Jaeggi, DM and Dawes, WN and Parks, GT and Savill, AM (2005) Multi-objective optimisation of turbomachinery blades using Tabu Search. In: Proceedings of the 3rd International Conference on Evolutionary Multi-Criterion Optimization, 9-3-2005 to 11-3-2005, Guanajuato, Mexico pp. 897-910..

Krishnababu, SK and Newton, PJ and Dawes, WN and Lock, G and Hodson, HP (2005) An experimental and numerical investigation of the tip leakage flow and heat transfer using a rotor tip leakage model. In: 6th European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics, 7-3-2005 to 11-3-2005, Lille, Belgium.

Dawes, WN (2005) Building blocks towards VR-based flow sculpting. In: 43rd AIAA Aerospace Sciences Meeting and Exhibit, 10-1-2005 to 13-1-2005, Reno, NV, US -..

Dawes, WN (2005) Building blocks towards VR-based flow sculpting. In: UNSPECIFIED pp. 545-555..

Newton, PJ and Krishnababu, SK and Lock, GD and Hodson, HP and Dawes, WN and Hannis, J and Whitney, C (2005) Heat transfer and aerodynamics of turbine blade tips in a linear cascade. In: UNSPECIFIED pp. 867-877..

Jarrett, JP and Dawes, WN and Clarkson, PJ (2004) An approach to integrated multi-disciplinary turbomachinery design. In: ASME Turbo Expo 2004: Power for Land, Sea and Air, 14-6-2004 to 17-6-2004, Vienna, Austria pp. 1651-1660..

Ciardi, M and Dawes, WN (2003) Development of a large eddy and detached eddy simulation capability. In: 33rd AIAA Fluid Dynamics Conference and Exhibit, 23-6-2003 to 26-6-2003, Orlando, FL, US.

Vicedo, J and Dawes, WN and Savill, AM (2003) Intermittency transport modelling of transition for external aerodynamic flows. In: 33rd AIAA Fluid Dynamics Conference and Exhibit, 23-6-2003 to 26-6-2003, Orlando, Florida, USA.

Dawes, WN and Kellar, WP and Harvey, SA and Dhanasekaran, PC and Savill, AM and Cant, RS (2003) Managing the geometry is Limiting the ability of CFD to manage the flow. In: 33rd AIAA Fluid Dynamics Conference and Exhibit, 23-6-2003 to 26-6-2003, Orlando, Florida, USA.

Dawes, WN and Kellar, WP and Harvey, SA and Dhanasekaran, PC and Savill, AM and Cant, RS (2003) Managing the geometry is limiting the ability of CFD to manage the flow. In: 33rd AIAA Fluid Dynamics Conference and Exhibit, 23-6-2003 to 26-6-2003, Orlando, Florida, U.S.A..

Vilmin, S and Hodson, HP and Dawes, WN and Savill, AM (2003) Predicting wake-passing transition in turbomachinery using an intermittency-conditioned modelling approach. In: 33rd AIAA Fluid Dynamics Conference and Exhibit, 23-6-2003 to 26-6-2003, Orlando, FL, US.

Harvey, SA and Dawes, WN and Gallimore, SJ (2003) An automatic design optimisation system for axial compressors. Part I: software development. In: The ASME Turbo Expo 2003, 16-6-2003 to 19-6-2003, Atlanta, GA, US GT2003-38115..

Harvey, SA and Dawes, WN and Bolger, JJ (2003) An automatic design optimisation system for axial compressors. Part II: Experimental validation. In: ASME Turbo Expo 2003: Power for Land, Sea and Air, 16-6-2003 to 19-6-2003, Atlanta, GA, US GT2003-38650..

Ferrechia, A and Dawes, WN and Dhanasekeran, PC (2003) Compressor rotor wakes and tone noise study. In: 9th AIAA/CEAS Aeroacoustics Conference, 12-5-2003 to 14-5-2003, Hilton Head, SC, US AIAA 2003-33328..

Smith, AN and Babinsky, H and Dhanasekaran, PC and Savill, AM and Dawes, WN (2003) Computational investigation of groove controlled shock/boundary layer interaction. In: 41st Aerospace Sciences Meeting and Exhibit, 6-1-2003 to 9-1-2003, Reno, NV, US.

Jarrett, JP and Dawes, WN and Clarkson, PJ (2002) Accelerating turbomachinery design. In: ASME Gas Turbine Conference, 3-6-2002 to 6-6-2002, Amsterdam, Netherlands pp. 1081-1088..

Jarrett, JP and Clarkson, PJ and Dawes, WN (2002) Improving turbomachinery design process management. In: The ASME Design Engineering Technical Conferences (DETC'02), 29-9-2002 to 2-10-2002, Montreal, Quebec, Canada pp. 161-170..

Elsner, W and Vilmin, S and Dawes, WN and Hodson, HP and Savill, AM (2001) Modelling of unsteady boundary layer on a blade profile with unNEWT PUIM code. In: Proceedings of CFD for Turbomachinery Applications (CFDTurbo2001), -9-2001 to --, Gdansk, Poland 236-..

Cant, RS and Dawes, WN and Savill, AM (2001) Combustion instability mechanisms in a lean premixed gas turbine combustor. In: 2nd Joint Meeting of the U.S. Sections of the Combustion Institute, 25-3-2001 to 28-3-2001, Oakland Marriott City Center Hotel, Oakland, California.

Dupere, IDJ and Dawes, WN and Tester, BJ and Wilson, AG (2001) Predictions of multiple tone noise and distortion noise in a transonic fan using unsteady CFD. In: 4th European Conference on Turbomachinery, 20-3-2001 to 23-3-2001, Florence, Italy pp. 435-442..

Gjerstad, S and Fu, Y and Hodson, HP and Dawes, WN (2000) A study of the frequency response of a micro machined shear stress sensor based on thin film anemometry. In: The 15th Biannual Symposium on Measuring techniques for transonic and supersonic flows in cascades and turbomachines, 21-9-2000 to 22-9-2000.

Vicedo, J and Dawes, WN and Savill, AM (2000) Intermittency transport modelling for natural transition in external aerodynamic applications. In: ECCOMAS 2000: 6th European Congress on Computational Methods in Applied Sciences and Engineering, 11-9-2000 to 14-9-2000, Barcelona, Spain.

Vilmin, S and Hodson, HP and Savill, AM and Dawes, WN (2000) Predicting wake passing transition in turbomachinery using a prescribed unsteady intermittency model. In: European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), 11-9-2000 to 14-9-2000, Barcelona, Spain.

Vilmin, S and Dawes, WN and Hodson, HP and Savill, AM (2000) Predicting wake-induced transition in turbomachinery using an intermittency-prescribed modelling. In: ECCOMAS 2000: 6th European Congress on Computational Methods in Applied Sciences and Engineering, 11-9-2000 to 14-9-2000, Barcelona, Spain.

Vicedo, J and Vilmin, S and Dawes, WN and Hodson, HP and Savill, AM (2000) The extension of CFD-friendly turbulence modelling to include transition. In: 8th European Turbulence Conference (ETC-8), 27-6-2000 to 30-6-2000, Barcelona, Spain pp. 213-218..

Birkby, P and Cant, RS and Dawes, WN and Savill, AM and Demargne, AAJ and Dhanasekeran, PC and Kellar, WP and Rycroft, NC and Eggels, RLGM and Jennions, IK (2000) CFD analysis of a complete industrial lean premixed gas turbine combustor. In: ASME International Gas Turbine and Aeroengine Congress and Exposition, 8-5-2000 to 11-5-2000, Munich, Germany.

Birkby, P and Cant, RS and Dawes, WN and Demargne, AAJ and Dhanesekaran, P and Kellar, WP and Rycroft, NC and Savill, AM and Eggels, RLGM and Jennions, IK (2000) CFD analysis of a complete industrial lean premixed gas turbine combustor. In: ASME International Gas Turbine and Aeroengine Congress and Exhibition, -5-2000 to --, Munich, Germany.

Yao, YF and Savill, AM and Dawes, WN and Sandham, ND (2000) Simulation of turbulent trailing-edge flow using unsteady RANS & DNS. In: 3rd International Symposium on Turbulence Heat and Mass Transfer, 2-4-2000 to 6-4-2000, Nagoya, Japan pp. 463-470..

Vicedo, J and Vilmin, S and Savill, AM and Dawes, WN (2000) Extension of intermittency transport modelling to natural transition in external aerodynamic applications. In: Royal Aeronautical Society Aerodynamics Research Conference, -4-2000 to --, London, UK.

Rycroft, NC and Savill, AM and Dawes, WN (2000) Reynolds-averaged and large-eddy simulations of flow through a tube bundle. In: 3rd International Symposium on Turbulence, Heat and Mass Transfer, -4-2000 to --, Nagoya, Japan.

Dawes, WN (1999) Challenges for turbomachinery CFD in the 21st Century. In: 1st International Conference on Engineering Thermophysics (ICET '99), 18-8-1999 to 21-8-1999, Beijing, China.

Sinclair, FM and Birkby, P and Savill, AM and Dawes, WN (1999) Flow visualisation animation using results from flow analyses. In: Proceedings of the Eurographics UK 17th Annual Conference, 13-4-1999 to 15-4-1999, Cambridge, UK.

Sinclair, FM and Dhanasekaran, PC and Demargne, AAJ and Dawes, WN and Savill, AM (1999) From CAD To CFD - interior volume removal as a data conversion tool. In: Proceedings of the Eurographics UK 17th Annual Conference, 13-4-1999 to 15-4-1999, Cambridge, UK.

Sinclair, FM and Birkby, P and Savill, AM and Cant, RS and Dawes, WN (1998) Numerical flow visualisation using results from an unstructured adaptive mesh. In: 8th International Symposium on Flow Visualization, 1-9-1998 to 4-9-1998, Sorrento, Italy.

Dawes, WN (1998) Simulation of unsteady blade row interaction with CFD: applications. In: Invited Lectures- Von Karman Institute for Fluid Mechanics, -2-1998 to --, Brussels, Belgium.

Dawes, WN (1998) Simulation of unsteady blade row interaction with CFD: background. In: Invited Lectures- Von Karman Institute for Fluid Mechanics, -2-1998 to --, Brussels, Belgium.

Cravero, C and Dawes, WN (1997) Throughflow design using an automatic optimisation strategy. In: ASME International Gas Turbine and Aeroengine Congress, 2-6-1997 to 5-6-1997, Orlando, Florida, US.

Dawes, WN (1997) Current and future developments in turbomachinery CFD. In: The 2nd European Conference on Turbomachinery Fluid Mechanics & Thermodynamics, 5-3-1997 to 7-3-1997, Antwerp, Belgium.

Birkby, P and Sinclair, FM and Savill, AM and Cant, RS and Dawes, WN (1997) The use of an unstructured mesh adaptive code to perform resolved obstacle computations for confined explosions. In: Proceedings, NEL/NAFEMS Conference on CFD Industrial Case Studies with Off-Shore Applications, -2-1997 to --, Aberdeen, Great Britain.

Connell, IK and Watterson, JK and Savill, AM and Dawes, WN (1996) An unstructured mesh Navier-Stokes solution procedure for predicting confined explosions. In: Proceedings of the International Congresses on Theoretical and Applied Mechanics(ICTAM), 25-8-1996 to 31-8-1996, Kyoto, Japan.

Connell, IJ and Watterson, JK and Savill, AM and Dawes, WN (1996) Predicting the SOLVEX box confined explosion test case with an unstructured adaptive mesh code. In: Abstracts from the 26th Combustion Institute Symposium, 29-7-1996 to 2-8-1996, Naples, Italy.

Dawes, WN (1996) Advanced numerical methods: solution of the 3D Navier-Stokes equations on structured & unstructured meshes for steady & unsteady flows in turbomachinery. In: Convegno Turbomacchine ’96, -7-1996 to --, Genova, Italy.

Dawes, WN (1996) Construction of CAD-based unstructured mesh models for 3D Navier-Stokes simulations. In: Proceedings of the Fifteenth International Conference on Numerical Methods in Fluid Dynamics, 24-6-1996 to 28-6-1996, Monterey, CL, US.

Connell, IJ and Watterson, JK and Savill, AM and Dawes, WN and Bray, KNC (1996) An unstructured adaptive mesh CFD approach to predicting confined premixed methane-air explosions. In: Proceedings of the 2nd International Specialists meeting on Fuel-Air Explosions, 26-6-1996 to 28-6-1996, Christian Michelsen Research (CMR) Bergen, Norway.

Dawes, WN (1996) The generation of 3D, stretched, viscous unstructured meshes for arbitrary domains. In: 1996 International Gas Turbine and Aeroengine Congress & Exhibition, 10-6-1996 to 14-6-1996, Birmingham, UK -..

Hodson, HP and Dawes, WN (1996) On the interpretation of measured profile losses in unsteady wake-turbine blade interaction studies. In: 41st International Gas Turbine and Aeroengine Conference and Exhibition, 10-6-1996 to 13-6-1996, Birmingham, UK pp. 276-284..

Watterson, JK and Savill, AM and Dawes, WN and Bray, KNC (1996) Predicting confined explosions with an unstructured adaptive mesh code. In: Proceedings, Joint Meeting of the Portugese, British, Spanish and Swedish Sections of the Combustion Institute, 1-4-1996 to 4-4-1996, Funchal, Madeira, Portugal.

Lukachko, SP and Waitz, IA and Miake Lye, RC and Brown, RC and Anderson, MR and Dawes, WN (1996) Chemical processes in the turbine and exhaust nozzle. In: Proceedings of an International Colloquium on the Impact of Aircraft Emissions upon the Atmosphere, 15-10-1996 to 18-10-1996, Paris, France.

Aubert, S and Dawes, WN (1995) Numerical analysis of an axial flow fan with air-separator equipment. In: 31st AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 10-7-1995 to 12-7-1995, San Diego, CL, US.

Dawes, WN (1995) Unsteady flows and loss production in centrifugal and axial compressor stages. In: Proceedings of the NATO AGARD Propulsion and Energetics Panel 85th Symposium, Loss Mechanisms and Unsteady Flows in Turbomachinery, 8-5-1995 to 12-5-1995, Derby, Great Britain.

Dawes, WN (1994) Advanced calculation methods. In: Axial Fan and Compressor course, Concepts ETI, -9-1994 to --, Turin, Italy.

O'Sullivan, MN and Waitz, IA and Greitzer, EM and Tan, CS and Dawes, WN (1994) A computational study of viscous effects on lobed mixer flow features and performance. In: 30th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 27-6-1994 to 29-6-1994, Indianapolis, US.

Dawes, WN (1994) A numerical study of the interaction of a transonic compressor rotor overtip leakage vortex with the following blade row. In: Proceedings of the International Gas Turbine and Aeroengine Congress and Exposition, 13-6-1994 to 16-6-1994, The Hague, Netherlands -..

Dawes, WN (1994) Unstructured mesh methods. In: COSMASE, Computation in Sciences, Methods and Algorithms on Supercomputing for Engineering, Short Course on Computational Fluid Dynamics (a COMETT project), --1994 to --, Ecole Polytechnique Federale de Lausanne, Switzerland.

Chen, G and Dawes, WN and Hodson, HP (1993) Numerical analysis of tip gap flow. In: AIAA/SAE/ASME/ASEE 29th Joint Propulsion Conference and Exhibit, 28-6-1993 to 30-6-1993, Monterey, CA, US.

Chen, G and Dawes, WN and Hodson, HP (1993) A numerical and experimental investigation of turbine tip gap flow. In: AIAA/SAE/ASME/ASEE 29th Joint Propulsion Conference and Exhibit, 28-6-1993 to 30-6-1993, Monterey, California, U.S.A..

Dawes, WN and White, AJ (1993) Fluid flow and heat transfer prediction in a non-rotating axial turbine internal coolant passage and comparison with experiment. In: International Gas Turbine and Aeroengine Congress and Exposition, 24-5-1993 to 27-5-1993, Cincinnati, Ohio, U.S.A. pp. 1-9..

Dawes, WN (1993) Simulating unsteady turbomachinery flows on unstructured meshes which adapt both in time and space. In: International Gas Turbine and Aeroengine Congress and Exposition, 24-5-1993 to 27-5-1993, Cincinnati, Ohio, U.S.A. -..

Dawes, WN (1993) Advanced calculation methods. In: Invited Lecture on the Axial Fan and Compressor course, -4-1993 to --, Wilder, Vermont, U.S.A..

Perrin, G and Leboeuf, F and Dawes, WN (1992) Analysis of three-dimensional viscous flow in a supersonic axial flow compressor rotor with emphasis on the tip leakage flow. In: 37th ASME International Gas Turbine Conference, 1-6-1992 to 4-6-1992, Cologne, Germany.

Ng, EYK and Dawes, WN (1992) A novel approach to high resolution compressible cascade flow analysis using the Navier-Stokes equations. In: 37th ASME International Gas Turbine Conference, 1-6-1992 to 4-6-1992, Cologne, Germany.

Dawes, WN (1992) The application of unstructured mesh 3D Navier-Stokes solvers to complex primary and secondary gas paths in turbomachinery. In: 7th IMACS International Conference on Computer Methods for Partial Differential Equations, -6-1992 to --, Rutgers University, NJ, US.

Dawes, WN (1991) Recent improvements to an unstructured mesh 3D Navier-Stokes solver aimed at extending the range of geometric capability. In: 11th ISABE Conference, 1-9-1991 to 6-9-1991, Nottingham, UK.

Dawes, WN (1991) Multi-blade row Navier-Stokes simulations of fan-bypass configurations. In: 36th ASME International Gas Turbine Conference, 3-6-1991 to 6-6-1991, Orlando, Florida, US.

Dawes, WN (1991) The development of a solution-adaptive 3D Navier-Stokes solver for turbomachinery. In: 27th AIAA/SAE/ASME/ASEE Joint Propulsion Conference, 24-6-1991 to 26-6-1991, Sacramento, California, US.

Dawes, WN (1991) Progress in the experimental validation of a solution-adaptive 3D Navier-Stokes solver. In: 3rd European Propulsion Forum, 13-11-1991 to 15-11-1991, Paris, France.

Dawes, WN (1990) A comparison of zero and one equation turbulence modelling for turbomachinery calculations. In: 35th ASME International Gas Turbine Conference, 10-6-1990 to 14-6-1990, Brussels, Belgium.

Dawes, WN (1990) Numerical methods for practical simulation of turbomachinery flows. In: Fluid Dynamics of Turbomachinery course, ASME International Gas Turbine Institute, -6-1990 to --, Iowa State University, US.

Dawes, WN (1990) Simulation of turbomachinery flows by non-time marching methods. In: Fluid Dynamics of Turbomachinery course, ASME International Gas Turbine Institute, -6-1990 to --, Iowa State University, US.

Dawes, WN (1990) Time marching solution of 2D and 3D Navier-Stokes equations for turbomachinery flows. In: Fluid Dynamics of Turbomachinery Course, ASME International Gas Turbine Institute, -6-1990 to --, Iowa State University, U.S.A..

Siden, GLD and Dawes, WN and Albråten, PJ (1989) A solution adaptive finite element method applied to two-dimensional unsteady viscous compressible cascadeflow. In: 9th ISABE Conference, 4-9-1989 to 9-9-1989, Athens, Greece.

Dawes, WN (1988) Development of a 3D Navier-Stokes solver for application to all types of turbomachinery. In: 33rd ASME International Gas Turbine Conference, -6-1988 to --, Amsterdam, Netherlands.

Zangeneh Kazemi, M and Dawes, WN and Hawthorne, WR (1988) Three dimensional flow in radial inflow turbines. In: 33rd ASME International Gas Turbine Conference, -6-1988 to --, Amsterdam, Netherlands.

Dawes, WN (1988) Analysis of 3D viscous flows in transonic compressors. In: Transonic Compressors, 1-2-1988 to 4-2-1988, Von Karman Institute, Brussels, Belgium.

Dawes, WN (1987) Application of a three-dimensional viscous compressible flow solver to a high-speed centrifugal compressor rotor-secondary flow and loss generation. In: IMechE Conference on Turbomachinery - Efficiency prediction and improvement, 1-9-1987 to 3-9-1987, Robinson College, Cambridge, Great Britain pp. 53-62..

McDougall, NM and Dawes, WN (1987) Numerical simulation of the strong interaction between a compressor blade clearance jet and stalled passage flow. In: 7th GAMM Conference on Numerical Methods in Fluid Mechanics, 9-9-1987 to 11-9-1987, Louvain-la-Neuve, Belgium.

Dawes, WN (1987) Multigrid accelerated Navier-Stokes computations of the 3D flow in axial and radial flow turbomachinery. In: The Fifth International Conference on Numerical Methods in Laminar and Turbulent Flow, --1987 to --, Swansea, UK.

Dawes, WN (1986) A numerical method for the analysis of 3D viscous compressible flow in turbine cascades; application to secondary flow development in a cascade with and without dihedral. In: International Gas Turbine Conference and Exhibit, 8-6-1986 to 12-6-1986, Dusseldorf, Germany -..

Dawes, WN (1986) Application of full Navier-Stokes solvers to turbomachinery flow problems. In: Numerical Techniques for Viscous Flow Calculations in Turbomachinery Bladings, -1-1986 to --, Von Karman Institute, Brussels, Belgium.

Dawes, WN and Camus, J-J and Xu, LP and Graham, CG (1986) Measured and predicted loss generation in transonic turbine blading. In: UNSPECIFIED pp. 1-8..

Dawes, WN (1986) A numerical study of the 3D flowfield in a transonic compressor rotor with a modelling of the tip clearance flow. In: UNSPECIFIED pp. 1-21..

Dawes, WN (1985) A pre-processed implicit algorithm for 3D viscous compressible flow. In: 6th GAMM Conference on Numerical Methods in Fluid Mechanics, 25-9-1985 to 27-9-1985, Göttingen, Germany.